}

Providing Guard Room Pathway Along Boundary Wall Rbt Wire And Other Miscellaneous Works At Hltb Tahirpur, Executive Engineer, CBMD, M231, PWD, (NCTD)-Delhi

Public Works Department-PWD has published Providing Guard Room Pathway Along Boundary Wall Rbt Wire And Other Miscellaneous Works At Hltb Tahirpur. Submission Date for this Tender is 28-10-2020. Wire Supply Tenders in Executive Engineer, CBMD, M231, PWD, (NCTD) Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

25787184
Providing Guard Room Pathway Along Boundary Wall Rbt Wire And Other Miscellaneous Works At Hltb Tahirpur
Open Tender
Indian
Delhi
Executive Engineer, CBMD, M231, PWD, (NCTD)
28-10-2020

Tender Details

Providing Guard Room Pathway Along Boundary Wall Rbt Wire And Other Miscellaneous Works At Hltb Tahirpur

Key Value

Document Fees
Refer document
EMD
INR 21912.0 /-
Tender Value
INR 10.95 Lakhs /-

BOQ Items

Name of Work: : Providing guard room, pathway along boundary wall, RBT wire and other miscellaneous works at HLTB Tahirpur
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. BI01010001010000000000000515BI0100001192
2 1.1 All kinds of soil 10 cum
3 2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
4 2.1 All kinds of soil
5 2.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 90 metre
6 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
7 3.1 1:5:10 (1 Cement : 3 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size). 11 cum
8 4 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 20x5mm of MS Flat and priming coat with approved steel primer all complete. 20 sqm
9 5 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :
10 5.1 250x16 mm 20 each
11 6 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
12 6.1 250x10 mm 20 each
13 7 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
14 7.1 125 mm 20 each
15 8 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 102 metre
16 9 Providing and fixing to existing door frames.
17 9.1 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. 38 sqm
18 10 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
19 10.1 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 640.2 kg
20 11 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 38 sqm
21 12 Finishing walls with Acrylic Smooth exterior paint of required shade :\nNew work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 350 sqm
22 13 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 350 sqm
23 14 Removing dry or oil bound distemper, water proofing cement paint and the like by\nscrapping, sand papering and preparing the surface smooth including necessary\nrepairs to scratches etc. complete. 200 sqm
24 15 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
25 15.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 2.5 cum
26 16 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 38 sqm
27 17 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush including making provision for contraction/expansion , construction and longitudinal joints (10mm wide x 50mm deep) by groove cutting machine, providing and filling joints with approved joint filler ans sealants etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work, joint fillers, sealants, dowel bars with sleeves/ tie bars shall be paid for separately).\n(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). 35 cum
28 18 Providing and laying in position bitumen hot sealing compound for expansion joints etc.
29 18.1 Using grade 'A' sealing compound. 300 per cm depth per cm width per m length
30 19 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 100 metre
31 20 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer-in-Charge.
32 20.1 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern. 140 sqm
33 21 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
34 21.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 5 each
35 22 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
36 22.1 W.C. pan with ISI marked white solid plastic seat and lid 5 each
37 23 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-\n(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 2 each
38 24 Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good \the walls wherever required :
39 24.1 Kitchen sink without drain board
40 24.2 610x510 mm bowl depth 200 mm 3 each
41 25 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
42 25.1 Flexible pipe
43 25.2 32 mm dia 2 each
44 25.3 40 mm dia 3 each
45 26 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
46 26.1 15 mm nominal outer dia Pipes 20 metre
47 26.2 20 mm nominal outer dia Pipes 25 metre
48 27 Providing and fixing PTMT bib cock of approved quality and colour.
49 27.1 15mm nominal bore, 86 mm long, weighing not less than 88 gms 20 each
50 28 Providing and fixing PTMT pillar cock of approved quality and colour
51 28.1 15 mm nominal bore, 107 mm long, weighing not less than 110 gms 5 each
52 29 Providing and fixing PTMT grating of approved quality and colour.
53 29.1 Circular type
54 29.2 100 mm nominal dia 5 each
55 29.3 125 mm nominal dia with 25 mm waste hole 5 each
56 30 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
57 30.1 For pipes 100 to 250 mm diameter 6 each
58 31 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :\n
59 31.1 Inside size 90x80 cm and 45 cm deep including precast RCC manhole cover and frame of approved make and manufacturer of size 600X450 mm internal dimension. \n
60 31.2 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 6 each
61 32 Extra for depth for manholes :\n
62 32.1 Size 90x80 cm
63 32.2 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 0.5 metre
64 33 Providing and installation of pre-fabricated porta cabin for guard room of size 4ft x 4ft with Puff wall panels & roof panels of minimum 50 mm thick with 0.5 mm thick profiled pre coated steel external facing sheets. The floor shall be of M S tube grid 50mm x 50mm covered by 18 mm plywood board & finished by PVC flooring of 1.5 mm with provision of one sliding glass window 3ft x 3ft and door of 30mm thick commercial flush door all necessary fitting. Electrical socket & switch to be provided along with finishing the walls by external waterproof weather shield paint of any desired shade as per the directions of Engineer-in-charge. 1 each
65 34 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete\n\n
66 34.1 300 mm dia RCC pipes 90 metre
67 35 Add Cost Index @ 15.85% on item No. 1 to 32, ie on Rs.8,56,848/- item133 856848 Cum
68 36 less 9.50% on item No.1 to 32, ie on Rs.8,56,848/- item134 856848 Cum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail