Supply Of Electrical Machines-L And Ll Lab Equipment Items Electrical Engg . Deptt . At Govt . Engineering College Baran, Baran-Rajasthan

Supply Of Electrical Machines-L And Ll Lab Equipment Items Electrical Engg . Deptt . At Govt . Engineering College Baran.- .01 To Perform O.C. And S.C. Test Non A 1-Phase Transformer And Nto Determine The Parameters Nof Its Equivalent Circuit Its Nvoltage Regulation And Nefficiency. Nto Determine The Efficiency Nand Voltage Regulation Of A Nsingle-Phase Transformer By Ndirect Loading. Item 01 1 Each 3 1.02 To Perform Sumpner’S Test On Ntwo Identical 1-Phase Ntransformers And Find Their Nefficiency & Parameters Of The Nequivalent Circuit Item 02 1 Each 4 1.03 To Perform The Heat Run Test Non A Delta / Delta Connected 3- Nphase Transformer And Ndetermine The Parameters For Nits Equivalent Circuit. Item 03 1 Each 5 1.04 To Perform The Parallel Noperation Of The Transformer Nto Obtain Data To Study The Nload Sharing. Item 04 1 Each 6 1.05 Separation Of No Load Losses In Nsingle Phase Transformer Item 05 1 Each 7 1.06 To Study Conversion Of Threephase Nsupply To Two-Phase Nsupply Using Scott Connection Item 06 1 Each 8 1.07 Speed Control Of Dc Shunt Nmotor By Field Current Control Nmethod & Plot Curve For Nspeed Versus Field Current. Nspeed Control Of Dc Shunt Nmotor By Armature Voltage Ncontrol Method & Plot Curve Nfor Speed Versus Armature Nvoltage. Item 07 1 Each 9 1.08 To Determine The Efficiency At Nfull Load Of A Dc Shunt Motor Nby Performing Swineburne’S Ntest. Item 08 1 Each 10 1.09 To Perform Hopkinson’S Test Non Two Similar Dc Shunt Nmachines And Hence Obtain Ntheir Efficiencies At Various Nloads. Item 09 1 Each 11 1.1 Study Of Various Types Of Nstarters For Induction Motor Item 10 1 Each 12 1.11 To Connect Two 3-Phase Ninduction Motor In Cascade Nand Study Their Speed Control Item 11 1 Each 13 1.12 To Perform Load Test On A 3 Nphase Induction Motor And Ncalculate Input Power , Output Npower , Torque, Efficiency, Ninput Power Factor, And Slip Nfor Various Load Settings. Item 12 1 Each 14 1.13 To Perform No Load And Nblocked Rotor Test On A 3 Nphase Induction Motor & Ndetermine Parameters Of Nequivalent Circuits. Ndraw The Circle Diagram And Ncompute The Following Nmax. Torque Ncurrrent Nslip Npf Nefficiency Item 13 1 Each 15 1.14 To Plot Occ And Scc Of An Nalternator Nto Determine Regulation Using Npotier Reactance Method Nto Determine Voltage Nregulation Using Direct Loading Nto Determine Voltage Nregulation Of Alternator Using Nsynchronous Impedance Nmethod Item 14 1 Each 16 1.15 To Synchronize An Alternator Nacross The Infinite Bus And Ncontrol Sharing . Item 15 1 Each 17 1.16 To Study Effect Of Variation Of Nfield Current Upon The Stator Ncurrent And Power Factor Of Nsynchronous Motor And Plot V Ncurves And Inverted V Curves Nof Synchronous Motor Nfor Different Values Of Loads Item 16 1 Each 18 1.17 Speed Control Of 3- F Ninduction Motor Item 17 1 Each 19 1.18 Xq And Xd Of Alternator Item 18 1 Each 20 1.19 Dc Rectifier Unit Item 19 1 Each 21 1.2 Electrical Distribution And Ncontrol Panel Item 20 1 Each

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	17-Nov-2020	Date	Date	28-11-2020

INR 500 /-

INR 21200.0 /-

INR 21.20 Lakhs /-