Central Reserve Police Force-CRPF has published Repair/Renovation Of Cook House And Dining Hall ( Size- 16X24 ) With Provision Of False Ceiling , Tiles Flooring , Complete Electric Fitting And Running Water Supply At Coy Hqr F/166 Bn Crpf. Submission Date for this Tender is 27-10-2020. Electrification Work Tenders in E/166 MAHESHPURA, JAMMU Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Name of Work:REPAIR/RENOVATION OF COOK HOUSE & DINING HALL SIZE (16'X24’x10’) AT COY HQR F/166 BN CRPF, MAHESHPURA , JAMMU (J&K) . | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.\nFor thickness of tiles 10 mm to 25 mm.\n | item1 | 35.72 | Sqm |
| 2 | 2 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks.\n | item2 | 3.52 | Cum |
| 3 | 3 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level : Cement mortar 1:4 (1 cement :4 coarse sand). | item 3 | 11.16 | Sqm |
| 4 | 4 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand). | item 4 | 26.13 | Sqm |
| 5 | 5 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand).\n | item 5 | 22.32 | Sqm |
| 6 | 6 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :\nNew work (two or more coats) over and including water thinnable priming coat with cement primer.\n | item 6 | 14.88 | Sqm |
| 7 | 7 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).\n | item 7 | 11.25 | Sqm |
| 8 | 8 | Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats).\n | item 8 | 66.97 | Sqm |
| 9 | 9 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. | item 9 | 50.65 | Sqm |
| 10 | 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps\nand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.\n | item 10 | 5.58 | Sqm |
| 11 | 11 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. | item 11 | 36.83 | Sqm |
| 12 | 12 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) : Light shade pigment using white cement. | item 12 | 75.44 | Sqm |
| 13 | 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). | item 13 | 1.49 | Cum |
| 14 | 14 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete : 40 mm thick with 20 mm nominal size stone aggregate \n | item 14 | 14.88 | Sqm |
| 15 | 15 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters : with ISI marked M.S. pressed butt hinges bright finished of required size : Second class teak wood. | item 15 | 3.9 | Sqm |
| 16 | 16 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws : Second class teak wood : 35 mm thick.\n\n | item 16 | 3.9 | Sqm |
| 17 | 17 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws : Second class teak wood : 35 mm thick. \n | item 17 | 3.35 | Sqm |
| 18 | 18 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm. | item 18 | 8 | each |
| 19 | 19 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete : 125 mm. | item 19 | 14 | each |
| 20 | 20 | Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm. | item 20 | 26 | each |
| 21 | 21 | Providing and fixing ISI marked oxidised M.S. door latches conforming to IS : 5930 with screws etc. complete : 300x20x6 mm. | item 21 | 4 | each |
| 22 | 22 | Painting with synthetic enamel paint of approved brand and\nmanufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.\n | item 22 | 21.95 | sqm |
| 23 | 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work : 20 mm nominal outer dia Pipes. | item 23 | 25 | mtr |
| 24 | 24 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore. | item 24 | 2 | each |
| 25 | 25 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore. \n\n | item 25 | 5 | each |
| 26 | 26 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required : 0.80 mm thick with zinc coating not less than 275 gm/m². | item 26 | 45.6 | sqm |
| 27 | 27 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board.\n | item 27 | 35.72 | sqm |
| 28 | 28 | Providing and Fitting of 2” dia hollow M.S pipe including cutting to size and shape & applying atleast 2 coats of Enamel Paint over a coat of Iron Primer, wherever required. | item 28 | 90 | feet |
| 29 | 29 | Providing & Installation of exhaust fan (18 inch- single phase, 1400 r.p.m) in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. | item 29 | 2 | Nos |
| 30 | 30 | Providing & Installation of Sliding Wall fan (400 mm) in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. | item 30 | 3 | Nos |
| 31 | 31 | Supplying and fixing LED Tubes per fitting, complete with all accessories including all connections etc. as required.\n | item 31 | 4 | Nos |
| 32 | 32 | Providing and fixing 0.75” Wire Batten/Casing on existing and new wiring.\n | item 32 | 120 | feet |
| 33 | 33 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 mm Wire (BIS Marked) in existing surface/ recessed steel/PVC conduit including dismantling as required.\n | item 33 | 1 | roll |
| 34 | 34 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 2.5 mm Wire (BIS Marked) in existing surface/ recessed steel/PVC conduit including dismantling as required.\n | item 34 | 1 | roll |
| 35 | 35 | Supplying and fixing 10 A rating, 240/415 V,10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required : Single pole and neutral.\n | item 35 | 1 | No |
| 36 | 36 | Supplying and fixing 16 A rating, 240/415 V,10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required : Single pole and neutral.\n | item 36 | 1 | No |
| 37 | 37 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required : 32 A.\n | item 37 | 1 | No |
| 38 | 38 | Dismantling of Old damaged Tin Sheet Roofing including its wooden Trusses and Purlins, and stacking the material within 50 metres lead. | item 38 | 1 | Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
