Jharkhand Police Housing Corporation Limited has published Construction Of Deep Borewell At Police Line , Palamu , Town Thana ( For Residence Of Police Officers And Mahila Thana ) , Palamu , Sadar Thana , Palamu , Haidernagar Thana , Palamu And Town Thana ( For 132 Residential Buildings In Town Thana . Submission Date for this Tender is 05-11-2020. Bore Well Tenders in Palamu Jharkhand. Bidders can get complete Tender details and download the document.
Name of Work: Construction of Deep Borewell at Police Line, Palamu, Town Thana (For Residence of Police Officers and Mahila Thana), Palamu, Sadar Thana, Palamu, Haidernagar Thana, Palamu and Town Thana (For 132 Residential buildings in Town Thana Campus, Palamu in the district of Palamu. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Section- I 200x150xmm dia Deep bore Well With Pump set & electrification etc works. (5 Nos.) | 1 | ||
2 | 2 | DW & SD \nBasic rate item no. 116\nSuppling all materisls labour and tools and cost of drilling 200mm x 165mm bore well in all kinds of soil and rock in rural area for installation of pump set with hydrolic DTH rig machine, all complete including suplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transprtation of Rig machine and other vehicles up to the site. | 2 | ||
3 | 3 | a) From 0.0M to 50.0 M belew G.L | 3 | 250 | P/M |
4 | 4 | b) From 51.0 M to200.00 M belew G.L | 4 | 500 | P/M |
5 | 5 | DW& SD \nBasic rate item no. 117(A)\nsupplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe itc including all taxes, VAT, Excise duty, freight charges with inspection charges etc as applicable, etc all complete job. | 5 | 100 | P/M |
6 | 6 | DW& SD \nCleaning Flushing and devloping of drilled hole for testing the discharge of water development of bore well by continueous flow of water bu using heavy compresser upto satisfaction of E/I. To get uniterrupted flow of water free from sand and soil etc. | 6 | 10 | Hr |
7 | 7 | DW & SD \nBasic rate item no. 117(B)\nSupplying and fitting M.S cap over 200mm dia casing pipe as per direction of E/I For safety of drilling bore including providing of guard for safety of the same till returned final. | 7 | 5 | Each |
8 | 8 | DW & SD \nBasic rate item no. 120(II) Page no-44(i)\nSupplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. | 8 | ||
9 | 9 | PM 1-2-2\nSubmersible Pump 150 mm dia ( with Bronze impeller) up to 8 stages 2.0 HP | 9 | 5 | Each |
10 | 10 | Analysed & Approved \nSupplying complete panel board with all accessories ( starter 1 no, volt meter 1 no, amp meter 1 no,100 amp kit kat ( male & female ) all complete job. | 10 | 5 | Each |
11 | 11 | DW & SD \nBasic rate item no. CB 1-3 Page no- 44(xi)\nSupplying 3 core flat flexible submersible cable with, copper conductor, PVC insulated and PVC sheathed.\n3 Core 4mm thick | 11 | 350 | M |
12 | 12 | Analysed & Approved \n2no heavy duty clamp 40mm dia suitable for 200 mm dia pipe with all complete job. | 12 | 10 | Each |
13 | 13 | DW & SD \nBasic rate item no. 9(K) (v) Page no 13\nSupplying & lowering 40mm da column G. I. pipe with all complete job. | 13 | 375 | P/M |
14 | 14 | DSR 18.9\nProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. | 14 | ||
15 | 15 | 18.9.3\n25 mm nominal outer dia pipes | 15 | 100 | M |
16 | 16 | 18.9.5\n40 mm nominal outer dia pipes | 16 | 25 | M |
17 | 17 | DSR 18.17\nProviding and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): | 17 | ||
18 | 18 | 18.17.1\n25 mm nominal bore | 18 | 8 | Each |
19 | 19 | 18.17.3\n40 mm nominal bore | 19 | 2 | Each |
20 | 20 | Add 12% GST | 20 | 1 | Nos |
21 | 21 | Add 1% Lebour Cess | 21 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail