New Delhi Municipal Council-NDMC has published Annual Repair And Maintenance Of Building In Bm Iii Division During 2020-21 Sh Installation Repairing And Rewinding At Motor Pumps Under The Area At Kaka Nagar Service Centre. Submission Date for this Tender is 27-10-2020. Building Repair Tenders in KAKA NAGAR NEW DELHI Delhi. Bidders can get complete Tender details and download the document.
| Name of Work: A/R & M/O Buildings of BM-III division during 2020-21. Sub-Head: Installation, repairing and rewinding of motor pumps under the area of Kaka Nagar Service Centre. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling and installing of pump set at site after repairing the same including cartage of motor pump to the workshop and back to site upto 10 HP. | 8 | each | |
| 2 | 2 | Repairing and rewinding of AC 5 HP motor of mono block pump set 3 phase 440 volts 2800/2900 RPM/50 Hz with superior copper wire of appropriate size with allied rewinding material, varnishing and dismantling from foundation and reinstalling the motor after repair including electric cable connection and testing etc. as per instruction of Engineer-in-Charge. | 10 | each | |
| 3 | 3 | Taking out upto 5 HP clear water drainage submersible pump set from sump/tube well etc. with the help of tripod, disconnection and reconnection of delivery pipe line and electric cable including testing etc. as required as per direction of Engineer-in-Charge. | 2 | each | |
| 4 | 4 | Rewinding and repairing of mono block submersible pump set upto 5 HP and replacing of defective parts bearing, bush, thrust plate water seal, check nut, welding turning and grinding the shaft and cartage from site to workshop and back to site including labour charge etc. as per entire satisfaction of Engineer-in-Charge. | 2 | each | |
| 5 | 5 | Providing and fixing cast iron impeller suitable for 5 HP to 7.5 HP pump set as per direction of Engineer-in-Charge. | 10 | each | |
| 6 | 6 | Supply and fixing ball bearing SKF/NBC in existing motor pump set including greasing cleaning and setting in position (main and end bearing) for 2 HP to 5 HP motor pump set as per direction of Engineer-in-Charge. | 10 | each | |
| 7 | 7 | Providing and fixing single phase preventer of approved make L&T Siemens or equivalent suitable for upto 10 HP mono block pump set as per direction of Engineer-in-Charge. | 10 | each | |
| 8 | 8 | Providing and fixing ampere meter 96x96 sqm (0_30 amp) of make AE (Automatic electric) Siemens, Havells or equivalent complete as per direction of Engineer-in-Charge. | 10 | each | |
| 9 | 9 | Providing and fixing volt meter 96x96 sqm (0-500 Volt) of make AE (Automatic electric) Siemens Havells or equivalent complete as per direction of Engineer-in-Charge. | 10 | each | |
| 10 | 10 | Providing and fixing gun metal sleeve graphite collars of required size in pump set upto 5 HP mono block pump set as per direction of Engineer-in-Charge. | 20 | each | |
| 11 | 11 | Supplying and fixing PVC insulated copper wire 4 sqm as per requirement at site of approved make and quality for motor and starter as per direction of Engineer-in-Charge. | 50 | metre | |
| 12 | 12 | Providing and fixing 32 ampere TPM MCB of make L&T/Havells/Fuji or equivalent make as per direction of Engineer-in-Charge. | 10 | each | |
| 13 | 13 | Providing and fixing wall mounted cubical type switch board (panel board) make out of 16 SWG nominal size MS sheet with hinges gasket in front duly compartmented painted over priming coat of approved make with suitable size including all accessories required to operate 1 no. 5 HP to 7 HP 3 phase 440 Volt pump set include 32 amp MCB/40 amp MCB, voltmeter, amp meter, phase preventer starter, phase indicating lamp push button on & off switch and insulated wire etc. as per direction of Engineer-in-Charge. | 4 | each | |
| 14 | 14 | Providing and fixing KDS three phase 5 HP monoblock pump set kirloskar or equivalent make having 800 RPM including testing and installation at site alongwith original guaranty card of manufacture as per direction of Engineer-in-Charge. | 2 | each | |
| 15 | 15 | Providing and fixing spare part for direct on line fully automatic starts I&T BCH or equivalent make\n25 AMP Connector | 10 | each | |
| 16 | 16 | Overload Relay | 10 | each | |
| 17 | 17 | Visiting charges of electrician for making required installation of pump or other trouble checking in pump and starter etc. | 30 | each | |
| 18 | 18 | Purchase and taken away of old damaged electric pump upto 5 HP including cartage etc. | 2 | each | |
| 19 | 19 | Dismantling/removing of old panel board/starter from pump room including disconnecting of electric cable if any. | 4 | each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
