Repairs To Plaster Repairing The Damaged Portions Of Lintel / Coping Plastering / Concrete Portion. Providing External Plaster Of 20Mm Thick And Match With Existing Surfaces With Cement Mortar 1:4 ( One Cement And Four Sand ) As Per Existing Design /-Rajasthan

Repairs To Plaster Repairing The Damaged Portions Of Lintel / Coping Plastering / Concrete Portion. Providing External Plaster Of 20Mm Thick And Match With Existing Surfaces With Cement Mortar 1:4 ( One Cement And Four Sand ) As Per Existing Design / Pattern And Thickness With Near Finish, In Patches To Match With The Adjoining Surfaces Including Carefully Chipping And Breaking The Existing Plaster At All Levels And Floors And Carting Away The Debris, Curing, Necessary Scaffolding Etc. Complete As Directed. Areas To Be Jointly Assessed Before Take Up The Work. Rate Shall Include Applying Rust Remover, Bond Coat ( Fosrocnitobond ) , Polymer Modified Mortar ( Using Approved Chemicals ) Wherever The Reinforcements Are Exposed And Concrete Is Deteriorated Etc, Complete As Directed Repairs To Plaster Of Thickness 12 Mm To 20 Mm With Cement Mortar 1:4 ( 1Cement: 4 Coarse Sand ) In Patches Of Area 2.5 Sq.Meters And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineerincharge. Infilling / Sealing Of Joint Between Rcc Lintel Cum Sunshade And Wall ( On External Side ) In All Floors / Terrace / Mumty Lintel Etc By Pushing In Grout Rw / Equivalent In Paste Form And Coving 20 Mm X 20 Mm After Applying A Coat Of Zycosil / Equivalent & Zycoprime / Equivalent Solution Before Cement Plastering Of Top, Bottom And Sides Of Rcc Sunshade. Providing & Applying Microfiber Reinforced Uv Resistant Acrylic Polymer Coating, Three Coats ( Excluding Primer Coat ) , Having Waterproofing Properties And Sri ( Solar Reflective Index ) Value > Or = 105, Solid Content Min. 50% And Tensile Strength Min. 1.00 N / Mm2 Of Approved Make With A Paint Brush Over Existing Roof Surface After Removal Of All Loose Materials Like Dust Etc. Priming With Primer Coat Of Approved Make. Polyester Reinforced Fiber Net Is Laying On The Surface After The

Refer document

Refer document

Refer document