Military Engineer Services-MES has published Provision Of Mt Store Shed For 10 Med Regt In Q Zone , Provn Of Pol Stores And Ddt Preparation Room At Sho ( L ) Ferozepur Cantt And Spl Repair To Block No Np-09 At 161 ( I ) Fd Wksp Coy ( Eme ) At N Zone Under Ge ( East ) Ferozepur Cantt .. Submission Date for this Tender is 05-11-2020. Building Repair Tenders in GE (EAST) FEROZEPUR CANTT Punjab. Bidders can get complete Tender details and download the document.
Name of Work: Provn of MT Store shed for 10 Med Regt in Q Zone, Provn of POL Stores and DDT preparation room at SHO (L) Ferozepur Cantt and Spl repair to block No NP-09 at 161 (I) Fd Wksp Coy (EME) at N Zone under GE (East) Ferozepur Cantt. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Qty | Units | |
1 | 1 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. | 300 | Sqm | |
2 | 2 | Excavation in tenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation and getting out in soft/loose soil complete all as specified and directed. | 180 | Cum | |
3 | 3 | All as per Serl Item No 2 here in before but exc 1.5m and not exc 3 m depth complete all as specified and directed. | 6 | Cum | |
4 | 4 | M&L PCC 1:4:8 type D2 ( using 40mm graded stone aggregate ) as in foundations, filling and mass concrete etc complete all as specified and directed. | 20 | Cum | |
5 | 5 | M&L brick work with sub class 'B;' bricks straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 complete all as specified and directed. | 83 | Cum | |
6 | 6 | All as per Serl Item No 5 here in before but built in CM 1:4 complete all as specified and directed. | 8 | Cum | |
7 | 7 | M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits ( if any) of foundations and plinth beams and similar work, vertical orr batter etc rough finished surfaces of concrete complete all as specified and directed. | 155 | Sqm | |
8 | 8 | M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions etc rough finished surfaces of concrete complete all as specified and directed. | 75 | Sqm | |
9 | 9 | M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc rough finished surfaces of concrete complete all as specified and directed. | 65 | Sqm | |
10 | 10 | M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and directed. | 205 | Sqm | |
11 | 11 | M&L for formwork to edges of conctete flats, treads, breaks in floors, window cills, concrete rialings, openings in conctete walls, floor and roofs horizontal or slopping and similar work exceeding 10cm but not exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed. | 80 | RM | |
12 | 12 | M&L TMT bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | 3375 | kgs | |
13 | 13 | All as per srl item No. 12 here in before but 6mm to 8mm dia complete all as specified and directed. | 1300 | kgs | |
14 | 14 | All as per srl item No. 12 here in before but 5mm dia and over up to and including 10mm dia as in stirups complete all as specified and directed. | 1400 | kgs | |
15 | 15 | M&L RCC M-25 design mix using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. | 37 | Cum | |
16 | 16 | M&L reinforced cement concrete ( M-25 Design Mix) 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. | 30 | Cum | |
17 | 17 | M&L reinforced cement concrete (m-25 Design Mix) 20mm grade aggregate as in chajjas complete all as specified and directed. | 2.5 | Cum | |
18 | 18 | M&L reinforced cement concrete (M-25 Design Mix) 20mm grade aggregate as in columns, pillars, piers, posts and structs etc complete all as specified and directed. | 35 | Cum | |
19 | 19 | M & L Reinforced cement concrete (M 25 Design Mix) 20mm grade aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed | 23 | Cum | |
20 | 20 | Returning, filling in including speading leveling, watering and wall ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed | 43 | Cum | |
21 | 21 | Removal of surplus soil not exceeding 100 metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed. | 188 | Cum | |
22 | 22 | M & L rendering 15mm thick plaster in CM 1:6 on fair faces of brick work/ concrete surface finished even and smooth without using extra cement complete all as specified and directed. | 400 | Sqm | |
23 | 23 | M & L rendering 15mm thick plaster in CM 1:4 on any faces of brick work/ concrete surface finished even and smooth without using extra cement complete all as specified and directed. | 360 | Sqm | |
24 | 24 | M & L for rendering 5 mm thick on ceillings in CM 1:3 etc complete all as specified and directed. | 254 | Sqm | |
25 | 25 | M & L applying 3 coats of white washing on walls including preparation of surface complete all as specified and directed. | 450 | Sqm | |
26 | 26 | M & L two coats of cement base paint over one coat of cement primer on walls including preparation of surface complete all as specified and directed. | 480 | Sqm | |
27 | 27 | M & L applying 3 coats of white washing on celing including preparation of surface complete all as specified and directed. | 244 | Sqm | |
28 | 28 | S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one or more rebates incl lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified and directed. | 69 | RM. | |
29 | 29 | S & F factory made 35mm thick second class HW plain framed panelling shutter (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail & stile as per SI-1003 (Pt-I) kin seasoned and chemically pressure treated for anti termite treatment complete all as specified and directed. | 27 | Sqm | |
30 | 30 | S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified | 30.2 | Sqm | |
31 | 31 | S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified | 30.2 | Sqm | |
32 | 32 | M&L mild steel framed work of FE-290 grade E-165 such as grils/guard bars with end of bars shouldered and /or riveted with steel /ventilators complete all as specified and directed. | 180 | Kg | |
33 | 33 | S&F Factory made box type steel ventilator fixed type complete witht glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified | 6.58 | Sqm | |
34 | 34 | S&F 3mm thick sheet glass ordinary quality and glazing withouth putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed. | 22.16 | Sqm | |
35 | 35 | All as per srl item No 34 above but forsted glass complete all as specified and directed. | 4 | Sqm | |
36 | 36 | S & F Galvanized mild steel wire cloth 0.56 mm noninal dia of wire and average width of sqm aperture not more than 1.8 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. | 24.16 | Sqm | |
37 | 37 | S& F 250mm MS sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with axe including a minimum of 6 bolt and nuts 4 on bolt plate and 2 on staple plate complete all as specified and directed. | 6 | Each | |
38 | 38 | S&F 200mm mild steel semi barrel tower bolt, open cover with sheet pressed barrel, stove enamelled black with bright not complete all as specified and directed. | 42 | Each | |
39 | 39 | S&F 150mm mild steel pressed handles oval type stove enamelled black complete all as specified and directed. | 44 | Each | |
40 | 40 | M&L preparation of new steel surfaces of any description over 10cm in width or grith not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 19.25 | Sqm | |
41 | 41 | M&L preparation of new wooden or wood based surfaces of any description over 10cm in width or grith not otherwise described and applying one coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 73.2 | Sqm | |
42 | 42 | M&L for 75mm thick PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) as in sub base of floor completed all as specified and directed. | 195 | Sqm | |
43 | 43 | M&L 50mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate Finished even & smooth without using extra cement | 195 | Sqm | |
44 | 44 | M&L brick hardcore of gauge not exceeding 63mm deposited, spread and leveled in layers not exceeding 15cm thick watered and rammed to a true surfacecompleted all as specified and directed. | 20 | Cum | |
45 | 45 | M&L 50mm thick PCC 1:3:6 type C-2 (with using 40mm graded stone aggregate) as in plinth protection,concrete surface finished even & smooth without using extra cement including construction joints completed all as specified and directed. | 100 | Sqm | |
46 | 46 | M&L Rendering 15mm thick screed/cement plaster in CM 1:3 with IWPC on RCC surface of roof/Brick walls finshed fair and even white the concrete is green IWPC shall be measured and paid sperately. | 200 | Sqm | |
47 | 47 | Supply only interal water proofing compound. | 69 | Kg | |
48 | 48 | M&L applying evenly a tack coat of industrial bitument 85/25 at the rate of 1.2 Kg per Sqm including cleaning of surface completed all as specified and directed. | 380 | Sqm | |
49 | 49 | M&L Ploythene film 150 micron thick laid on a coat of bitumen primer @ 0.30 to 050 Kg per sqm in roofs with 150mm overlaps completed all as specified and directed. | 380 | Sqm | |
50 | 50 | M&L 80mm thick average consolidated thicnesss, mud pushka on flat roofs including 25 mm thick mud plaster and 3 mm thick leeping completed all as specified and directed. | 380 | Sqm | |
51 | 51 | M&L for 40mm thick brick tiles laid on mud mortar and jointed grouted flush in CM (1:3) mixed with 5% of crude oil by weight of cement on mud phuska completed all as specified and directed. | 380 | Sqm | |
52 | 52 | M&L Flush pointing to brick tiles/ terracing tiles on roofs in cement mortar 1:3 completed all as specified and directed. | 20 | 10 Sqm | |
53 | 53 | Surface excavation in soft /loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. | 100 | Sqm | |
54 | 54 | Factory made 60mm thick pre-cast coloured interlocking tiles PCC (M-35 Nominal Mix) over 25mm thick layer fine sand and grouted with dry sand over and including 75mm thickg brick hard core complete all as spd | 100 | Sqm | |
55 | 55 | Continuous brick edging using full bricks of sub class ''B'' old size bricks with width equal to width of bricks laid dry on end vertically including necessary earth work, embedding bricks at reqired depth and tamping ground around brick and removal of surplus soil to a distance n exc 50 meter, complete all as specified as in repairs. (each row measured separately) | 200 | RM | |
56 | 56 | Speading and leveling in layers not exceeding 25 cm thick each layer including watering and well ramming complete all as specified and directed. | 30 | Cum | |
57 | 57 | M & L rendering 15 mm thick rough cast plaster on fair face of brick work or concrete surface in CM 1:3 complete all as specified and directed. | 40 | Sqm | |
58 | 58 | S&F mild steel butt hinges medium weight cold rolled size 100mm complete all as specified and directed. | 6 | Each | |
59 | 59 | S&F 300 mm mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. | 11 | Each | |
60 | 60 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level), complete all as specified and directed. | 6 | Cum | |
61 | 61 | M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection ,50mm thick,surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as directed. | 65 | Sqm | |
62 | 62 | Dismantling floor, hearth or wall tiling including cement mortar beding (but not backing),removing serviceable tiles to store and rubbish off the premises. | 270 | Sqm | |
63 | 63 | M&L for Non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc for joint free set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour including 20 mm thick screed in cement mortar (1:6) pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. | 135 | Sqm | |
64 | 64 | All as per item No 63 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. | 12 | Sqm | |
65 | 65 | M&L for glazed ceramic tiles in vertical surfaces 350x250x7mm thick set and jointed in neat cement slurry (1:4) and pointed in white cement to match the colour of tile complete all as specified and directed. | 7 | Sqm | |
66 | 66 | M&L Glazed ceramic coloured(colour & shade as approved) tiles non skid of size 300x300x7mm thick as in floor set and jointed in neat cement slurry over and including 20mm thick screed in cement mortar (1:6) pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. | 40 | Sqm | |
67 | 67 | M&L Glazed Ceramic coloured tiles 300mmx200mmx7mm thick premium quality over and incl 10mm thick rendering in cm 1:4 on vertical surfaces,set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match colour of tiles complete all as specified & directed. | 60 | Sqm | |
68 | 68 | Dismantling brick tiles laid in single layer jointed & pointed in cement mortar complete all as specified and directed. | 180 | Sqm | |
69 | 69 | Demolition of mud phuska in roofs,any thickness,including leeping plaster(whether full thickness removed or only a part thereof) complete all as specified and directed. | 14.4 | Cum | |
70 | 70 | M&L 10mm rendering plaster in cm(1:4) finished even and smooth with using extra cement on bottom layer of batten roof with water proofing compound complete all as specified and directed. | 180 | Sqm | |
71 | 71 | Old Brick tiles retrived from dismantling 40mm thick laid on mud mortar(mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed. | 72 | Sqm | |
72 | 72 | M&L cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in benching,kerbs,mud stop,rounded or chamfered on edges including formwork complete all as specified and directed. | 0.5 | Cum | |
73 | 73 | Dismantling of brickwork built in cement mortar of any specification and in any position complete all as specified and directed. | 3 | Cum | |
74 | 74 | All as per item No 73 above but using old bricks retrived from demolition including cleaning and removal of mortar from old bricks. | 1 | Cum | |
75 | 75 | Taking down cement plaster from brick walls of any description,racking out joints,hacking for key,scrubbing down with water etc complete all as specified and directed. | 240 | Sqm | |
76 | 76 | M&L rendering/plastering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces,using WPC,surfaces finished even and smooth without using extra cement complete all as specified and directed. | 70 | Sqm | |
77 | 77 | M&L rendering/plastering,12 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. | 120 | Sqm | |
78 | 78 | M&L preparation of old decorated plastered surfaces of ceiling & applying one coat of white wash complete all as specified and directed. | 50 | Sqm | |
79 | 79 | M&L for preparation of newly plastered surface of wall and applying two coat of oil bound distemper over chalk whitening complete all as specified and directed. | 70 | Sqm | |
80 | 80 | M&L for preparation of old decorated plastered or un-plastered wall surfaces by brooming down with brooms or steel wire bushes, scraping down smoke soots,moulds,moss and efflorescent salt,trading oil and greasy spots and applying two coats of oil bound distemper complete all as specified and directed. | 120 | Sqm | |
81 | 81 | M&L for preparation of old surface of wall and applying one coat of cement base paint. | 200 | Sqm | |
82 | 82 | Taking down wooden/steel chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.50 sqm each including cutting holes of appropriate size for insertion blocks of cement concrete for hold fasts complete all as specified and directed. | 40 | Each | |
83 | 83 | All as per item No 82 above but size exceeding 1.5 sqm & not exceeding 4 sqm each. | 14 | Each | |
84 | 84 | S&F pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one rebate including lock strike plate,shock absorbers,20mm dia 60mm long MS conduit for housing of a drop bolt,butt hinges,hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fats/lugs with a coat tar or black paint including hinges,hold fasts/lugs etc complete all as specified and directed. | 32 | RM | |
85 | 85 | M&L cement concrete(1:3:6),type C-1 using 20mm graded stone aggregate as in bed blocks of hold fasts,coping etc including necessary formwork complete all as specified and directed. | 0.8 | Cum | |
86 | 86 | S&F 35mm thick,2nd class hard wood(Hollock),glazed and skelton,open rebated and prepared to receive glass/gauge etc divided into square with plain rounded mitered and reabated sash bar any numbers,fitted with cut and mitered beads for securing glass etc size of members as specified in clause 8.20(a) of MES Schedule Part-I in Section-8,complete all as specified and directed. | 12 | Sqm | |
87 | 87 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified. | 50 | RM | |
88 | 88 | S&F factory made solid panel PVC door shutters 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails,MS frame covered with heat moulded plain colour PVC Ç'channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed as site complete all as specified in clause 8 B.2.1 of MES schedule Part-II(2004) Make:Rajshiri or equivalent as approved by GE | 18 | Sqm | |
89 | 89 | S&F sliding door bolts of mild steel,300 mm long,stove enameled black with bright bolt not less than 12mm dia with & including minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete all as specified and directed. | 14 | Each | |
90 | 90 | S&F in repair wire cloth galvanised mild steel,0.56 mm nomial dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire complete all as specified and directed. | 1.5 | Sqm | |
91 | 91 | M&L Painting to new wooden or wood based surfaces of any description, over 10cm width or girth in two coats with synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and directed. | 35 | Sqm | |
92 | 92 | M&L Painting to new steel surfaces of any description, over 10cm width or girth in two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed. | 42 | Sqm | |
93 | 93 | S&F PTMT tower bolt 150mm long and fixed with steel screws complete all as specified and directed. | 24 | Each | |
94 | 94 | S&F PTMT butt hinge 100mm long fixed with steel screws with brass/bronze hinge pin complete all as specified and directed. | 36 | Each | |
95 | 95 | S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed. | 24 | Each | |
96 | 96 | S&F water storage tanks 500 litres capacity,rotational moulded,triple layer polythene(cylindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank,complete all as specified and directed. | 6 | Each | |
97 | 97 | S&F Ball valve of PTMT 20mm bore, high pressure with polythene float and fly nut complete with aluminium rod, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. | 6 | Each | |
98 | 98 | S&F in repair 15mm stop valve cast copper alloy chromium plated long shank and cup(concealed type) screwd down,high each pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. | 14 | Each | |
99 | 99 | S&F in repair stop valve of cast copper alloy,chromium plated fancy type 20mm bore,screwed down,high pressure with crutch or each butter fly handle screwed both ends for iron pipe or for union & fixed complete all as specified and directed. | 14 | Each | |
100 | 100 | S&F in repair bib tap of cast copper alloy 15mm bore chromium plated with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule complete all as specified and directed. | 12 | Each | |
101 | 101 | S&F in repair stop valve of cast copper alloy,chromium plated fancy type 15mm bore,screwed down,high pressure with crutch or each butter fly handle screwed both ends for iron pipe or for union & fixed complete all as specified and directed. | 7 | Each | |
102 | 102 | S&F squatting pan orissa pattern, vitreous china white of size 580 X 440 mm with integeral foot rest, including necessary lime concrete and 100mm bore sand cast iron 'P'trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints,fixed in repairs,complete all as specified and directed. | 6 | Each | |
103 | 103 | Taking up or down existing steel water tubing,15mm bore alongwith connection fixed/laid in any situation,complete all as specified and directed. | 45 | RM | |
104 | 104 | All as per item No 103 above but 20mm bore tubing. | 18 | RM | |
105 | 105 | S&F 15mm bore GI tubes,medium grade with all fitting and fixed complete to walls and ceilings or laid in floors. | 40 | RM | |
106 | 106 | All as per item No 105 above but 20mm bore tubing. | 14 | RM | |
107 | 107 | Fixing only,after cleaning old steel water tubing,15mm bore and connections in new or old position using new fittings complete all as specified and directed. | 5 | RM | |
108 | 108 | All as per item No 107 above but 20mm bore. | 4 | RM | |
109 | 109 | Demolition and breaking up dia drain pipes(salt glazed ware AC or reinforced concrete) set in cement mortar. | 12 | RM | |
110 | 110 | S&F PVC (SWR),pipes 110mm single socketed in any length with rubber joints,laid in trenches or in floor complete all as specified and directed. | 6 | RM | |
111 | 111 | S&F PVC(SWR),pipes 110mm single socketed in any length with rubber joints,rings joints fixed to wall complete all as specified and directed. | 6 | RM | |
112 | 112 | S&F PVC (SWR) bend complete all as specified and directed. | 6 | Each | |
113 | 113 | Chromium plated shower roses with or without swivel joints,any size,including fixing to steel pipe or union as fixed in repair complete all as specified and directed. | 12 | Each | |
114 | 114 | S&F Shelf of PTMT fixed with and including CP brass screws and wooden/plastic cleats(Minimum weight 300gms). | 12 | Each | |
115 | 115 | S&F looking mirror of selected quality beveled edge glass of size 600x450mm and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cups washers as in repairs complete all as specified and directed. | 7 | Each | |
116 | 116 | S&F in repair Pillar tap,15mm bore,PTMT any colour screw for iron pipe and fixed complete all as specified and directed. | 7 | Each | |
117 | 117 | S&F in repair 10ltr capacity PVC valveless,syphonic action type,flushing cistern,low level,white,with inlet,ball valve,float and handle including brackets and flush pipe of polythylene of low or high density or PVC 32 mm dia,for low level cistern complete all as specified and directed. | 6 | Each | |
118 | 118 | S&F in repair wash hand basin,flat back 550x400 mm vitreous china (white) including PTMT wash fittings,32mm bore size,waste pipe,PVC,32mm bore,angle iron/cast iron brackets of required size as directed & making goods disturbed surface to match with the existing as in repair complete all as specified and directed. | 7 | Each | |
119 | 119 | S&F sinks or laboratory with plugs washers including bedding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to waste pipe upto 0.5 sqm each and complete all as specified and directed. | 7 | Each | |
120 | 120 | S&F PVC connection of 15mm size with PTMT nuts of length of 450mm complete all as specified and directed. | 14 | Each | |
121 | 121 | Demolition of reinforced cement concrete in any position not described else where complete all as specified and directed. | 0.1 | Cum | |
122 | 122 | Precast RCC in CM(1:2:4) type B1 using 20mm graded stone agg as in manhole covers including necessary formwork all as specified reinforced shall be measured separately. | 0.1 | Cum | |
123 | 123 | Taking down carefully existig copper/ alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as Switches, Sockets, Ceiling Roses, Holders, Bracket fittings with Battens/ Conduits/ Wires,Tube Light fittings and ceiling fans as exsist at working spot and making good the disturbed surfaces of walls and roofs etc. and to match with existing colour complete all as specified and directed. | 172 | Per Point | |
124 | 124 | Taking down carefully unserviceable main switches and distribution boards with fuses/MCB's (single phase or three phase) of any capacity all as specified and directed.\n | 7 | Each | |
125 | 125 | Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as specified and directed. | 246 | RM | |
126 | 126 | M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including PVC conduit with all accessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/ fan point controlled by one, one way switch all as specified and directed. | 156 | Per Point | |
127 | 127 | One 3 pin socket outlet 5 amps independent board with cable 1.5 Sqmm size | 28 | Per Point | |
128 | 128 | One 3 pin socket outlet 5 amps on the same board with other switches with cable 1.5 Sqmm size | 22 | Per Point | |
129 | 129 | All as per item No. 126 above but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable. | 26 | Per Point | |
130 | 130 | S&F Switch piano flush type 6 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14121 or equivalent in Plaza/ INDOASIAN as approved by GE | 148 | Each | |
131 | 131 | S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14401 or equivalent in Plaza/ INDOASIAN as approved by GE | 18 | Each | |
132 | 132 | S&F Socket outlet 2 in 1, 5 pin, 6 Amps, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14119 or equivalent in Plaza/ INDOASIAN as approved by GE | 42 | Each | |
133 | 133 | S&F Socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14307 or equivalent in Plaza/ INDOASIAN as approved by GE | 18 | Each | |
134 | 134 | S&F Bell push flush, type 6 amp single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14123 or equivalent in Plaza/ INDOASIAN as approved by GE | 6 | Each | |
135 | 135 | S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and directed. Make-Anchor, Model- Rose Mary Ding Dong, Cat Part No-8294 or equivalent in Plaza/ INDOASIAN as approved by GE | 6 | Each | |
136 | 136 | S&F Glint Switch piano modular flush type of single module, 6 amps, single pole one way made up of Polycarbonate FR material, duly ISI marked complete all as specified and directed. Make- INDOASIAN Cat Part No-800000 as approved by GE | 52 | Each | |
137 | 137 | S&F Glint Switch piano modular flush type of single module, 16 amps, single pole one way made up of Polycarbonate FR material, duly ISI marked complete all as specified and directed. Make- INDOASIAN Cat Part No-800002 as approved by GE | 8 | Each | |
138 | 138 | S&F Glint modular Socket, 6 Amps 2/3 pin combined universal type of 2 module, pencil free operation with child safety shutter made up of Polycarbonate FR material, duly ISI marked, complete all as specified and directed. Make- INDOASIAN Cat Part No-800020 | 8 | Each | |
139 | 139 | S&F Glint modular Socket, 6 /16 Amps 2/3 pin combined universal type of 2 module, pencil free operation with child safety shutter made up of Polycarbonate FR material, duly ISI marked, complete all as specified and directed. Make- INDOASIAN Cat Part No-800022 | 8 | Each | |
140 | 140 | S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. Make- Anchor, Model- Penta Cherry, Cat Part No-39040 or equivalent in Plaza/ INDOASIANas approved by GE | 103 | Each | |
141 | 141 | S&F Glint fan regulator, electronic step type 100W capacity, of single module, single pole made up of Polycarbonate FR material, duly ISI marked. Make-INDOASIAN Cat Part No-800041 | 4 | Each | |
142 | 142 | S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta PC, Cat Part No-14502 or equivalent in Plaza/ INDOASIAN as approved by GE | 12 | Each | |
143 | 143 | S&F Lamp angle holder (Plastic Ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor, Model- Penta Cherry, Cat Part No-39527 or equivalent in Plaza/ INDOASIAN as approved by GE | 47 | Each | |
144 | 144 | S&F LED bulb of 10 watt all as specified and directed. Make-Havells, Model No-LED ADORE 10 W B22 CDL 3 STAR LAMP or equivalent in Crompton/ Wipro as approved by GE | 47 | Each | |
145 | 145 | S&F LED fittings of 20W LED 6000 K, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient fixed to wall/ ceiling/ roof etc complete all as specified and directed. Make-Havells, Model-E-Lite LED Pride Plus Neo, Cat Part No-LHEXACP7IN1W020 or equivalent in Crompton/ Philips as approved by GE | 56 | Each | |
146 | 146 | S&F Ceiling fan 1200mm sweep, AC single phase 230 Volts 50Hz, including provision of flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to ceiling fan upto 1.5 mtr for giving connection and all hanging arrangement i.e. standard down rod, hanging clamp, with rubber real nuts bolts, spring washers and locking of splite pin, plastic canopy with screw compete without fan regulator and marking of MES nos with black synthetic enameled paint all as specified and as directed. Make-Crompton Greaves, Model- STAR220 1200MM WHITE-WOR or equivalant in Orient/ Havells/ Usha/ Bajaj/ Khaitan as approved by GE | 4 | Each | |
147 | 147 | S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed. Make:- Crompton, Model.EXHD300-6-1 or equivalent in Khaitan/ CG/ Bajaj as approved by GE | 14 | Each | |
148 | 148 | Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed as approved by GE | 12 | Each | |
149 | 149 | Taking down/up of single phase electric meter and fixing only and connecting electric meters upto 25 amps including provision of suitable size screw, washers and flexible pvc conduit of suitable size (not less than 20mm) complete all as specified and directed. | 6 | Each | |
150 | 150 | Fixing or hanging only ceiling fans height upto 3mtr to 5 mtrs ceiling height of bldg including three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified and directed. | 12 | Each | |
151 | 151 | S&F Sheet metal enclosures with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of 240V, 20 amps complete all as specified and directed. Make- INDOASIAN Cat Part No-811956 or equivalent in C&S/ Legrand/ Havells as approved by GE | 4 | Each | |
152 | 152 | S&F Factory made three phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 4 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail suitable for use on 240/415V, 50Hz supply (suitable for mounting Optium F-1 MCCB as incomer) VTPN DB, partly immersed in wall, including of MCCB 4 pole fixed thermal & magnetic type 63 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified and directed. Make- INDOASIAN Cat Part No-811888 & Cat Part No-830020 (MCCB) or equivalent in C&S/ Legrand/ Havells as approved by GE | 2 | Each | |
153 | 153 | S&F Sheet metal Meter Box single door minimum size 30x45x20cm for electric meter Factory made of MS sheets/CRCA sheet duly painted with powder paint and door hinged locking arrangement conforming to IS 5039 of 1983. The electric meter/switch box shall be suitable for fixing one number of electric meter and knock out holes for incoming and outgoing cable. Before the powder paint process the sheet steel shall go through the anti corrosion conditioning process in not less than seven tank process. Concealed in wall, including making good distrurbed surfaces with matching colour, compete all as specified. Make- Sintex/ ABS/ CG/ Legrand/ Havells/ Indoasian as approved by GE | 6 | Each | |
154 | 154 | M&L for Sub main wiring with two single core 2x6 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in PVC rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable PVC conduit shall measured together as unit length). | 261 | RM | |
155 | 155 | M&L for Sub main wiring with two single core 2x4 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 4.0 sqmm drawn in PVC rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable PVC conduit shall measured together as unit length). | 100 | RM | |
156 | 156 | S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified and directed. Make- INDOASIAN Cat Part No-811807 or equivalent in C&S/ Legrand/ Havells. | 7 | Each | |
157 | 157 | S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 4 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly partially immersed in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified and directed. Make- HPL/ INDOASIAN/ C&S/ Legrand/ Havells | 1 | Each | |
158 | 158 | S&F MCB SPN, 63 Amps, 240 volts, "C" series, 10KA duly ISI marked, complete all as specified and directed. Make- HPL, Cat Part No- NTSPNC63 or equivalent in INDOASIAN/ Legrand. | 11 | Each | |
159 | 159 | S&F MCB SPN, 40 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and directed. Make- HPL, Cat Part No- NTSPNB40 or equivalent in INDOASIAN/ Legrand. | 8 | Each | |
160 | 160 | S&F MCB SPN, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and directed. Make- HPL, Cat Part No- NTSPB6-32 or equivalent in INDOASIAN/ Legrand. | 46 | Each | |
161 | 161 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire. | 34 | RM | |
162 | 162 | S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 35 Sqmm nominal cross section, 4 core, Circular, PVC insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified and directed. Make-Gloster/ Havells/ Finolex/ Universal Cables as approved by GE | 86 | RM | |
163 | 163 | S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, Circular, PVC insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified . Make- Gloster/ Finolex/ Universal Cable/ Havells/ Kalinga/ Polycab as approved by GE | 100 | RM | |
164 | 164 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core. | 86 | Rm | |
165 | 165 | Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan,for laying of cable and getting out,compete all as specified. | 47.25 | Cum | |
166 | 166 | M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified and directed. (Excavation and earth work measured separately).Note- Punned down thickness shall be measured. | 14.18 | Cum | |
167 | 167 | S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and directed. (Excavation and earth work measured separately). | 1.52 | Per 1000 Nos | |
168 | 168 | Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified and directed. | 27.3 | Cum | |
169 | 169 | Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified and directed. | 16.92 | Cum | |
170 | 170 | Supply and laying GI Tubes of 40 mm bore'light grade (for passing of cables/ laid in trenches fixed to pole/ wall/ laid under floor/ roads) complete with and including fitting as required all as specified. | 28 | RM | |
171 | 171 | S&F Bldg Security light fittings LED 40 watts, including GI bracket bend to shape made out of GI pipe light grade of suitable size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire all as specified and directed. Make- Crompton, Model-FREEDOM NEO, Cat Part No-LSTS-40-CDL-M or equivalent in Havells/ Bajaj as approved by GE | 6 | Each | |
172 | 172 | S&F Bldg Security light fittings LED 25 watts, including GI bracket bend to shape made out of GI pipe light grade of suitable size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire all as specified and directed. Make- Crompton, Model-ASTRA NEO, Cat Part No-LSTS-25-CDL-M or equivalent in Havells/ Bajaj as approved by GE | 11 | Each | |
173 | 173 | Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mtr as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) . | 5 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail