Military Engineer Services-MES has published Providing Of Pvc Door In Bath And Toilet Of Or Md Accn In Bldg Nos P2 P3 P5 P13 P14 P15 P32 P65 P66 At Strandline And Provn Of Al Sliding Window Door Shutter In Balcony And Common Passage For Rain Water Protection In Bldg No P1 At Afcb Under Gec Kol. Submission Date for this Tender is 07-11-2020. Road Work Tenders in Kolkata West Bengal. Bidders can get complete Tender details and download the document.
| Name of Work: PROVISION OF PVC DOOR IN BATHROOM AND TOILET OF OR MD ACCN IN BLDG NOS. P-02, P-03, P-05, P-13, P-14, P-15, P-32, P-65 & P-66 AT STRANDLINE AND PROVN OF ALUMINIUM SLIDING WINDOW/ DOOR SHUTTER IN BALCONY AND COMMON PASSAGE FOR RAIN WATER PROTECTION IN BLDG NO. P-01 AT AFCB UNDER GE(C) KOLKATA. | |||||
|---|---|---|---|---|---|
| Item No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed | 2 | 772 | Sqm |
| 2 | 2 | Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. | 3 | 213 | Each |
| 3 | 3 | Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & directed by the Engr-in-Charge. | 4 | 749.7 | Rm |
| 4 | 4 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.\n | 5 | 171.36 | Sqm |
| 5 | 5 | Supply and fix aluminium anodised three track sliding window frame with shutters ( two panels of glazed shutter and one panel of wire mesh shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements etc. complete and glazing with 5 mm thick tinted glass to aluminium frame work using rubber gasket and stainless steel wi\re cloth of 0.36mm nominal dia of wire fitted with screws and washer. The section of frame and shutter is as under complete all as specified and as directed:-\n(A) Sections for frame (i) Top and verticals 92x 29.50 x 1.30 mm thick (ii) Bottom 92 x 29.50 x 1.20 mm thick. \n(B) Sections for shutter (i) 'A' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick\n(C) 'H' section 41 x 20 x 1.10 mm thick .\n | 6 | 70 | Sqm |
| 6 | 6 | Supply and fix aluminium anodized ( Powder coated) four track sliding window shutters with frame including all necessary jointing cleats, holdfasts, , rubber gasket, snap beading and locking arrangements fixed with with screws to wall etc complete and glazing with and including 5mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36mm dia & average width of aperture 1.40mm with staple or suitable fillets and wire mesh fitted with screws and washers etc with the following section of frame and shutter Complete all as specified and as directed.\n(A) Section for shutters:-\n(i) 'H' Section 39mm x 20mm x 1.50mm thick.\n(ii) Interlocking section 39mm x20mm x1.50mm tthick.\n(iii) Edge and bottom section 41mm x 20mm x 1.50mm thick.\n(B) Section of frame:-\n(i) Top and side of section 123mm x29.70mm x1.50mm thick not less than 1.30Kg/Rm.\n(ii) Bottom section 123mm x29.70mm x1.50mm thick not less than 1.502 Kg / Rm complete all as specified and as directed by Enginner in Charge.\nNotes for Item Nos 5 & 6:- Cost of 5mm thick tinted glass and cost of wire gauge shall deemed to be included in the rate quoted by Tenderer. | 7 | 6.5 | Sqm |
| 7 | 7 | Suplly and fixing Exterior Aluminium composit panel ( ACP) of any shade/ colour, thickness of panel shall be 3mm thick of ISO 9001-2008 certified including aluminium frame work of rectangular section 63.5mm x 38.10mm x1.50mm thick for back support frame for installing ACP panel in hollow space between coloumns / wall etc. The Joints betwen ACP will be filled with backer rod and sealed with silicon weather seal complete all as specified and directed by Engineer-in-Charge.\nNote:- Aludecor Lamination Pvt.Ltd / Pratabond / Hex Bond ACP / Alstrong. | 8 | 10 | Sqm |
| 8 | 8 | Supply and fix 100mm butt hinges Stainless steel complete all as specified and as directed. | 9 | 459 | Each |
| 9 | 9 | Supply and fix 150mm Aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.\n | 10 | 306 | Each |
| 10 | 10 | Supply and fix 150 mm extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.\n\n | 11 | 306 | Each |
| 11 | 11 | Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. | 12 | 612 | Sqm |
| 12 | 12 | Materials and labour Preparation of newly plastered wall surfaces of any description and applying two coats of acrylic distemper of any colour / tint over a coat of primer complete all as specified and directed. | 13 | 612 | Sqm |
| 13 | 13 | Materials and labour Preparation of old plastered wall surfaces and applying one coat of acrylic distemper of any colour / tint complete all as specified and directed. | 14 | 765 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
