Indian Oil Corporation Limited-IOCL has published Wbso Engg Installation Of Mass Flow Meters Mfm For Tanker Loading Unloading And For Barge Loading At Haldia Installation A Under West Bengal State Office Installation Of Mass Flow Meters Mfm For Tanker Loading Unloading And For Barge Loading At Haldia Ins. Submission Date for this Tender is 29-10-2020. Flowmeters Tenders in Haldia Installation A under WBSO. West Bengal. Bidders can get complete Tender details and download the document.
| Name of Work: Installation of Mass Flow Meters (MFM) for Tanker Loading/Unloading and for Barge Loading at Haldia Installation A under West Bengal State Office | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 10 | Part - A : Material Supply | TEXT0001 | ||
| 2 | 10.01 | MS PIPE: ASTM SA 106 Gr.B (for pressure relief piping) | M&I Item 258 | ||
| 3 | 10.02 | 25mm Dia. ASTM SA 106 Gr.B SCH-80 | M&I Item 259 | 90 | M |
| 4 | 10.03 | 20mm Dia. ASTM SA 106 Gr.B SCH-80 | M&I Item 260 | 90 | M |
| 5 | 10.04 | Supply (Class-800) CS Gate Valve for pressure relief lines as per enclosed specification\nGate Vlv API 602 CL800 SWE Bltd Bonnet Handwheel Operator A105 Trim 8 to API 600 602 (13% Cr Hard faced Seat) OS&Y Graphite Gland Packing API 598 Solid Wedge | M&I Item 291 | ||
| 6 | 10.05 | 25 mm dia | M&I Item 292 | 18 | EA |
| 7 | 10.06 | 20 mm dia | M&I Item 293 | 36 | EA |
| 8 | 10.07 | Pistn Lft Chk Vlv EN ISO 15761 A105 CL800 SWE Bltd Bonnet Trim 8 to API 594 602 (13% Cr Hard faced Seat) Horiz. Installation API 598 | TEXT0002 | ||
| 9 | 10.08 | 25 mm dia | M&I Item 290 | 18 | EA |
| 10 | 10.09 | Supply of following Slip On flanges OR Weld neck type- WNRF conforming to ASTM A- 105 Class 150; ANSI B 16.9 | M&I Item 316 | ||
| 11 | 10.1 | 400 mm dia | M&I Item 317 | 8 | EA |
| 12 | 10.11 | 350 mm dia | M&I Item 318 | 2 | EA |
| 13 | 10.12 | 300 mm dia | M&I Item 319 | 18 | EA |
| 14 | 10.13 | 250 mm dia | M&I Item 320 | 4 | EA |
| 15 | 10.14 | 200 mm dia | M&I Item 321 | 12 | EA |
| 16 | 10.15 | 150 mm dia | M&I Item 322 | 2 | EA |
| 17 | 10.16 | 100 mm dia | M&I Item 323 | 2 | EA |
| 18 | 10.17 | Supply of Thermal Relief Valves as per specifications Inlet 20 mm X Outlet 25 mm | M&I Item 344 | 16 | EA |
| 19 | 10.18 | PIPE FITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducer made of carbon steel seamless pipes with bevelled ends as per enclosed specifications for the following sizes Note: The fittings shall be as per ASTM A 234 Grade WPB schedule 40 and dimensions as per ASME B 16.5.\nNote: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.\n90 Deg LR elbow (1.5D) | M&I Item 345 | ||
| 20 | 10.19 | 400 mm dia | M&I Item 349 | 5 | EA |
| 21 | 10.2 | 350 mm dia | M&I Item 350 | 4 | EA |
| 22 | 10.21 | 300 mm dia | M&I Item 351 | 12 | EA |
| 23 | 10.22 | 250 mm dia | M&I Item 352 | 4 | EA |
| 24 | 10.23 | 200 mm dia | M&I Item 353 | 8 | EA |
| 25 | 10.24 | PIPE FITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducer made of carbon steel seamless pipes with bevelled ends as per enclosed specifications for the following sizes Note: The fittings shall be as per ASTM A 234 Grade WPB schedule 40 and dimensions as per ASME B 16.5.\nNote: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.\nReducers (Concentric) | M&I Item 426 | ||
| 26 | 10.25 | 300 X 250 mm | M&I Item 427 | 6 | EA |
| 27 | 20 | Part - B : Mechanical Installation | TEXT0003 | ||
| 28 | 20.01 | LAYING & WELDING OF PRODUCT PIPELINE (ABOVE GROUND) IN ZONE-A\nLaying and welding (3 runs min.) above ground/ below ground pipelines from supplied MS pipes (pipes to be supplied anywhere within the depot and the contractor shall shift the same to the site of work at no extra cost with all leads and lifts) of the following sizes as described below, including cutting bevelling and fixing the supplied specials such as elbows, bends tees, reducers etc complete and hydrotesting the pipelines at 10.5 KSC for a minimum period of 4 Hrs. \nThe job includes dye penetration (DP) testing of pipeline joints as per approved QAP.\nAbove ground pipeline to be laid on concrete pedestals (which is to be constructed as per the respective item of this schedule)/ piperacks/ TLF shed/ pump house and manifolds and painting the pipeline as per the specifications enclosed including the colour coding as per IOC specifications. Welding of pipeline should conform to Radiography quality. 10% of the joints shall be radiograped and the cost of the same will be paid separately as per respective item etc. and as directed at site.\nNote: \na. Any repairs to the defective welding shall be made good at no extra cost. Re radiography of repaired joint shall also be at contractor's cost.\nb. The rates quoted also to include colour coding of pipelines as per the standards.\nc. Painting Scheme : Application for External/ Internal painting for all product tanks shall be carried out by means of AIRLESS SPRAY PAINTING SYSTEM only. \n1. Surface Preparation as per SA 2½\n2. Primer : P1-Inorganic Zinc Ethyl Silicate: Single Coat: DFT-65-75µ\n3. Intermediate Coat : U1-Polyamide cured HB Epoxy MIO : Single Coat: DFT-100-125µ\n4. Finish Coat : F1-Two Pack Acrylic Poly-Urethane(PU) : Single Coat: DFT-40-50µ\nTotal Min DFT 215µ | M&I Item 2 | ||
| 29 | 20.02 | 400 mm dia pipe | M&I Item 6 | 70 | M |
| 30 | 20.03 | 350 mm dia pipe | M&I Item 7 | 70 | M |
| 31 | 20.04 | 300 mm dia Pipe | M&I Item 8 | 40 | M |
| 32 | 20.05 | 250 mm dia pipe | M&I Item 9 | 30 | M |
| 33 | 20.06 | 200 mm dia pipe | M&I Item 10 | 20 | M |
| 34 | 20.07 | 100 mm dia pipe | M&I Item 12 | 10 | M |
| 35 | 20.08 | Welding of the supplied CS WNRF flanges on the pipelines with 1 run inside and two runs outside etc compete and as per specifications enclosed. BW,WNRF Flange SCH-40 require minimum 3 runs, which is equival to 3 runs FW, for SORF Flange. In addition, root weld is to be grinded to sound metal | M&I Item 122 | ||
| 36 | 20.09 | 400 mm dia | M&I Item 126 | 8 | EA |
| 37 | 20.1 | 350 mm dia | M&I Item 127 | 2 | EA |
| 38 | 20.11 | 300 mm dia | M&I Item 128 | 18 | EA |
| 39 | 20.12 | 250 mm dia | M&I Item 129 | 4 | EA |
| 40 | 20.13 | 200 mm dia | M&I Item 130 | 12 | EA |
| 41 | 20.14 | 150 mm dia | M&I Item 131 | 2 | EA |
| 42 | 20.15 | 100 mm dia | M&I Item 132 | 2 | EA |
| 43 | 20.16 | Making flanged joints between flanges (WNRF/SORF/BLRF) including supplying and fixing 3 mm thick SW SS gaskets with graphite fillers, studs, nuts, bolts of approved make for the following sizes, as per IOCL specifications and site instructions. The flange joint shall also include providing and fixing multistrand copper wire/flat for bonding of product pipelines including provision of lugs. | M&I Item 138 | ||
| 44 | 20.17 | 500 mm dia | M&I Item 140 | 1 | EA |
| 45 | 20.18 | 400 mm dia | M&I Item 142 | 6 | EA |
| 46 | 20.19 | 350 mm dia | M&I Item 143 | 2 | EA |
| 47 | 20.2 | 300 mm dia | M&I Item 144 | 12 | EA |
| 48 | 20.21 | 250 mm dia | M&I Item 145 | 3 | EA |
| 49 | 20.22 | 200 mm dia | M&I Item 146 | 7 | EA |
| 50 | 20.23 | 150 mm dia. | M&I Item 147 | 7 | EA |
| 51 | 20.24 | 100 mm dia. | M&I Item 148 | 2 | EA |
| 52 | 20.25 | Fixing & Installation of the supplied ROSOV / DBBV / MOV / GOGV / PLUG VALVE / CS GATE VALVE / QUARTER TURN VALVE / BALL VALVE of the following sizes on the pipeline including supplying and fixing 3 mm thk SW SS gaskets, studs/nuts etc of approved make for the following sizes as per specifications and site instructions. \nNote: The rate quoted for the above items should include:\na. mechanical cleaning/greasing of the valves after erection.\nb. supplying and painting the valves/ fittings etc. with two coats of P3 primer and two coats of F4 finish paint of approved colour and shade as per colour coding specifications for fittings on product/ fire hydrant lines.\nc. Fittings on ethanol service shall be provided with PTFE gaskets 3mm thk.\n | M&I Item 156 | ||
| 53 | 20.26 | 400 mm dia | M&I Item 160 | 17 | EA |
| 54 | 20.27 | 350 mm dia | M&I Item 161 | 15 | EA |
| 55 | 20.28 | 300 mm dia | M&I Item 162 | 11 | EA |
| 56 | 20.29 | 250 mm dia | M&I Item 163 | 6 | EA |
| 57 | 20.3 | 200 mm dia | M&I Item 164 | 8 | EA |
| 58 | 20.31 | 150 mm dia | M&I Item 165 | 7 | EA |
| 59 | 20.32 | 100 mm dia | M&I Item 166 | 4 | EA |
| 60 | 20.33 | Installing the supplied thermal relief valves for the product pipeline and fixing the same on the pump discharge lines to TLF including painting the valves and connected piping with 2 coats of P3 primer and 2 coats of F4 finish paint of approved colour and shade as per the directions of site engineer.\nNote: \na. The 20/ 25 mm dia piping connected to the TRVs shall be measured and paid separatey under respective items.\nb. The job also includes providing and fixing 8SWG copper wire for the flange joints of the assembly. | M&I Item 184 | 18 | EA |
| 61 | 20.34 | Fabrication & installation of the following sizes of MS pipes (ASTM A 106 B, SCH-40) as per specification including cutting, welding, laying etc as per site requirement including blast cleaning the surfaces of the pipes to SA 2 1/2 and painting with two coats of P3 primer and two coats of F2 finish paint as per enclosed specifications etc complete and as per site directions.\nNote: The job includes providing and welding necessary fittings such as bends/ tees/ flanges etc complete. | M&I Item 185 | ||
| 62 | 20.35 | 25mm dia. | M&I Item 186 | 90 | M |
| 63 | 20.36 | 20mm dia. | M&I Item 187 | 90 | M |
| 64 | 20.37 | Dismantling & stacking of CI/GI/MS/SS pipe (of any specification) anywhere inside of IOC location | M&I Item 486 | ||
| 65 | 20.38 | 600 mm dia pipe | M&I Item 487 | 2 | M |
| 66 | 20.39 | 500 mm dia pipe | M&I Item 488 | 2 | M |
| 67 | 20.4 | 350 mm dia | M&I Item 491 | 5 | M |
| 68 | 20.41 | 400 mm dia pipe | M&I Item 490 | 15 | M |
| 69 | 20.42 | 300 mm dia Pipe | M&I Item 492 | 10 | M |
| 70 | 20.43 | 250 mm dia pipe | M&I Item 493 | 45 | M |
| 71 | 20.44 | 200 mm dia pipe | M&I Item 494 | 10 | M |
| 72 | 20.45 | 100 mm dia pipe | M&I Item 495 | 20 | M |
| 73 | 20.46 | Dismantling of ROSOV / DBBV / MOV / GOGV / PLUG VALVE / CS GATE VALVE / QUARTER TURN VALVE / BALL VALVE/ Butterfly valves of the following sizes on the pipeline including stacking the same inside premises. | M&I Item 498 | ||
| 74 | 20.47 | 400 mm dia | M&I Item 502 | 1 | EA |
| 75 | 20.48 | 350 mm dia | M&I Item 503 | 1 | EA |
| 76 | 20.49 | 300 mm dia | M&I Item 504 | 1 | EA |
| 77 | 20.5 | 250 mm dia | M&I Item 505 | 7 | EA |
| 78 | 20.51 | 200 mm dia | M&I Item 506 | 2 | EA |
| 79 | 20.52 | 150 mm dia | M&I Item 507 | 5 | EA |
| 80 | 20.53 | 100 mm dia | M&I Item 508 | 4 | EA |
| 81 | 20.54 | 80 mm dia | M&I Item 509 | 1 | EA |
| 82 | 20.55 | Structural Steel Works: \nSupplying, transporting, fabricating, erecting Structural steel work from rolled sections and built-up sections like flats, tees, angles, channels, plates, pipes etc for various structural elements as required in POL Terminal/Depot other than in Vertical oil storage tank. \nPreparation of drawing, design & specification shall be arranged by contractor at his own cost as per guidance of IOCL. \nItem also includes painting of structural surface as per the following painting scheme:\ni. Surface preparation: St-2/St-3\nii. Primer: P4-Self Priming HB Epoxy Primer : One Coat : DFT 100-125µ\niii. Intermediate Coat: U1-Polyamide cured HB Epoxy mastic coating : One Coat: DFT 100-125µ\niv. FinishPaint: F1-Two Pack Acrylic Polyerethane (PU) : One Coat: DFT 40-50µ per coat\nv. Total min DFT : 240µ\nThe items include supply of paints and other required meterial, scafolding, labours, tools and tackles etc. \nThe make of Structural Steel / tubular steel shall be of SAIL/Tata/RINL/Jindal. In case some small Mild Steel sections are not manufactured by SAIL/Tata, steel of other manufactuer may be used which must confirm the relevant IS code with prior approval of Engineer-In-Charge." | M&I Item 510 | 10500 | KG |
| 83 | 20.56 | Designing, supplying,fabricating,welding, bolting, riveting, assembling and erecting in position temporary required local 8.0 M highfire screen wall aound the tank with GI sheets with cross supports etc as per alignment shown by site Engineer, maintaining same till the completion of entire work and dismantling the entire screen wall carting away the dismantled materials from site redoing the entire existing surface to the original condition etc complete.The 8M high fire screen wall including the foundation is to be designed and approved by a '' licensed structural Engineer'' and should be suitable for local soil bearing capacity, wind speed etc. | M&I Item 615 | 900 | M2 |
| 84 | 20.57 | Mass flow meter handling, transportation, installation, erection, testing and commissioning | |||
| 85 | 20.58 | 100 mm | Pro rata rate taken from installation of 250 mm dia MFM item 1 | 1 | EA |
| 86 | 20.59 | 150 mm | Pro rata rate taken from installation of 250 mm dia MFM item 2 | 1 | EA |
| 87 | 20.6 | 250 mm | PO no. 25329734 dated 27.12.2017 item 00020 sl no. 00010 | 2 | EA |
| 88 | 20.61 | 300 mm | Pro rata rate taken from installation of 250 mm dia MFM item 3 | 1 | EA |
| 89 | 20.62 | 350 mm dia | Pro rata rate taken from installation of 250 mm dia MFM item 4 | 2 | EA |
| 90 | 20.63 | 400 mm | Pro rata rate taken from installation of 250 mm dia MFM item 5 | 2 | EA |
| 91 | 20.64 | Air eliminator: Handling, transportation, installation, erection, testing & commissioning of Air eliminator of the following size on the pipeline including supplying and fixing metallic gasket, studs & bolts etc. (as per piping material specification : 9224-0000-PIPHNS-00001) Note: The rate quoted for above itemsw should include supplying and painting color coding as per IOCL specification | PO no. 25329734 dated 27.12.2017 item 00020 sl no. 00020 | 12 | EA |
| 92 | 20.65 | Installing the supplied bucket type (100 mesh) strainers as per specs and drawing for the product pumps for the following LPM & pipeline sizes:\nNote: The strainers shall be cleaned and painted with 2 coats of P3 primer and 2 coats of F4 finish paint of approved colour and shade etc as per the directions of the site engineer & the rates quoted should include the same. | M&I Item 173 | ||
| 93 | 20.66 | 400 mm dia. (Bucket type) | pro rata rate derived from the item 200 mm bucket type strainer installation | 4 | EA |
| 94 | 20.67 | 350 mm dia. (Bucket type) | pro rata rate derived from the item 200 mm bucket type strainer installation 2 | 3 | EA |
| 95 | 20.68 | 300 mm dia (Bucket type) | M&I Item 174 | 1 | EA |
| 96 | 20.69 | 250 mm dia (Bucket type) | M&I Item 175 | 1 | EA |
| 97 | 20.7 | 200 mm dia (Bucket type) | M&I Item 176 | 1 | EA |
| 98 | 20.71 | 150 mm dia (Bucket type) | M&I Item 177 | 1 | EA |
| 99 | 20.72 | Dismantling Mass flowmeter | Lumpsum rate taken 1 | 3 | EA |
| 100 | 20.73 | Dismantling Air-Eliminator | Lumpsum rate taken 2 | 3 | EA |
| 101 | 20.74 | Cold Cutting of Pipe Lines where presense of flammable\ngases are possible, by Hacksaw, water jet or other acceptable method, maintaining all safety procedures, of following sizes, of following sizes.as per technical\nspecifications, standards and instructions . Note: This item is applicable only for receiving & Delivery oil pipe lines from/to terminals & depots (Each Joint) where isolation valves close to cutting location is not available. | M&I Item 636 | ||
| 102 | 20.75 | 400mm dia | M&I Item 640 | 3 | EA |
| 103 | 20.76 | 350 mm dia | M&I Item 641 | 1 | EA |
| 104 | 20.77 | 300mm dia | M&I Item 642 | 6 | EA |
| 105 | 20.78 | 250mm dia | M&I Item 643 | 2 | EA |
| 106 | 20.79 | 200mm dia | M&I Item 644 | 2 | EA |
| 107 | 30 | Part - C : Civil work | text0004 | ||
| 108 | 30.01 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed. | M&I Item 671 | ||
| 109 | 30.02 | i) All kinds of Soil | M&I Item 672 | 120 | M3 |
| 110 | 30.03 | Supplying and Local sand filling within the grading zone V of fine aggregates specified in table 3.1 , clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete | M&I Item 706 | 45 | M3 |
| 111 | 30.04 | Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level : | M&I Item 707 | ||
| 112 | 30.05 | iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) | M&I Item 710 | 45 | M3 |
| 113 | 30.06 | Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level | M&I Item 744 | ||
| 114 | 30.07 | ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm | M&I Item 746 | 120 | M3 |
| 115 | 30.08 | Centering and shuttering including strutting, propping etc. and removal of form for : | M&I Item 755 | ||
| 116 | 30.09 | i) Foundations,footings,bases of columns, etc. for mass concrete | M&I Item 756 | 750 | M2 |
| 117 | 30.1 | Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels | M&I Item 766 | ||
| 118 | 30.11 | ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786 | M&I Item 768 | 9600 | KG |
| 119 | 30.12 | Demolishing cement concrete manually/ by mechanical means including disposal of material outside premises at unobjectionable and as per direction of Engineer - in - charge. | M&I Item 864 | ||
| 120 | 30.13 | i) 1:3:6 or richer mix | M&I Item 865 | 90 | M3 |
| 121 | 30.14 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars & disposal of unserviceable material outside site at unobjectionable place& as per direction of Engineer-in-charge. | M&I Item 867 | 45 | M3 |
| 122 | 30.15 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. | M&I Item 868 | 45 | M2 |
| 123 | 30.16 | Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside site at unobjectionable place & as/direction of Engineer-in-charge. | M&I Item 869 | 21 | M3 |
| 124 | 30.17 | Supply & filling coarse sand of Zone III in SAND PAD foundation in layers not exceeding 200mm.Each deposited layer shall be compacted by mechanical vibration and watering to achieve minimum relative density 85 %. Last layer of sand pad to be prepared in desired slope. | M&I Item 871 | 45 | M3 |
| 125 | 40 | Part - D : Electrical work | TEXT0005 | ||
| 126 | 40.01 | Supplying, fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams or any other structure members with MS suspenders, angles, channels, etc complete as per the direction of IndianOil | MPLEN010XX | ||
| 127 | 40.02 | i) 100mm x 25mm x 2mm | MPLEN01001 | 900 | M |
| 128 | 40.03 | CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items | MPLEN001XX | ||
| 129 | 40.04 | MFM/RTU power: Supply and Laying 3 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of\nEngineer in charge | MPLEN00104 | 650 | M |
| 130 | 40.05 | DBBV power: Supply and Laying 4 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge | MPLEN00105 | 650 | M |
| 131 | 40.06 | Main cable for DBBV and MFM : 3.5 Core x 35 sq. mm Aluminium Cable FRLS | MPLEN00117 | 400 | M |
| 132 | 40.07 | Supply of cables shall be along with accessories like certified double compression cable glands with PVC shrouds, plugs for excess entries, SS 316 engraved tag plate, mounting clamp, SS 316 fasteners , OFC accessories (like 12/24 port LIU, splice trays, loaded adaptor and blank plates, UTP and optical patch cords, pigtails, media converters etc), LAN face plates, conduits, structural steel for mounting of equipments, making RCC trenches with cover wherever required, hume pipes, Aluminium tags, lugs, ferrules, etc. | TEXT005 | ||
| 133 | 40.08 | MFM/RTU communication cable: Supply and laying of FRLS Armoured Copper Signal cable as per tender specification 8Px1.5 sq.mm. | P.O. : 26361038 dated 16.03.2020 item 00070&80 SL1160 | 2050 | M |
| 134 | 40.09 | DBBV communication cable: Supply and laying of FRLS Armoured Copper Signal cable as per tender specification 2Px1.5 sq.mm. | P.O. : 26361038 dated 16.03.2020 item 00070&80 SL 1120 | 950 | M |
| 135 | 40.1 | Supply of 1C x 6 Sq. mm FRLS Flexible copper insulated green wire for earthing instruments and junction boxes etc complete as per specification and tender document. | P.O. : 26361038 dated 16.03.2020 item 00070&80 SL 1550 | 450 | M |
| 136 | 40.11 | FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP) : Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Beluga/CEAG-FCG /Flexor/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. | MPLEN005XX | ||
| 137 | 40.12 | P/F Cable termination for 3 Core x 2.5 sq. mm with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge. | MPLEN00507 | 18 | EA |
| 138 | 40.13 | P/F Cable termination for 4 Core x 2.5 sq. mm with FLP double compression glands, lugs etc. as\nper specifications and direction of Engineer-in charge. | MPLEN00511 | 18 | EA |
| 139 | 40.14 | P/F Cable termination for 3.5 Core x 35 sq. mm with FLP double compression glands, lugs etc. as\nper specifications and direction of Engineer-in charge. | MPLEN00517 | 18 | EA |
| 140 | 40.15 | Supply and installation of Exd/FLP Junction Box (Power/Control/Signal JB) with IP 65 as per specification suitable for hazardous area of zone 1, group IIA/IIB, T3 or better having CCOE/CMRI approval. It shall be complete in all respect. Accessories like certified double compression cable glands with PVC shrouds & plugs for excess entries, SS 316 engraved tag plate, mounting clamp & SS 316 fasteners. Complete as per specification / tender documents. 24 ways JB | P.O. : 26361038 dated 16.03.2020 item 00070&80 SL1650 | 9 | EA |
| 141 | 40.16 | PROVISION OF EARTHING | MPLEN023XX | ||
| 142 | 40.17 | i) Providing earthing with 100 mm dia, 3.0M long C.I pipe as per IS:3043 (with latest ammendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drawing all complete as per specification & direction of Engineer In-charge | MPLEN02301 | 9 | EA |
| 143 | 40.18 | Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : | MPLEN024XX | ||
| 144 | 40.19 | iii) 50 x 6 mm G.I. Strip | MPLEN02403 | 225 | M |
| 145 | 40.2 | iv) 25 x 6 mm GI strip | MPLEN02404 | 450 | M |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
