}

Maintenance Of Park Plantation Truck And Other Equipments For Hort . Wing . Raising Of Boundary Wall And Construction Of Walkway In Dda Park Near Wazirpur Industrial Area ., Lawrence Road-Delhi

Delhi Development Authority-DDA has published Maintenance Of Park Plantation Truck And Other Equipments For Hort . Wing . Raising Of Boundary Wall And Construction Of Walkway In Dda Park Near Wazirpur Industrial Area .. Submission Date for this Tender is 24-10-2020. Footpath Work Tenders in Lawrence Road Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

25739962
Maintenance Of Park Plantation Truck And Other Equipments For Hort . Wing . Raising Of Boundary Wall And Construction Of Walkway In Dda Park Near Wazirpur Industrial Area .
Open Tender
Indian
Delhi
Lawrence Road
24-10-2020

Tender Details

Maintenance Of Park Plantation Truck And Other Equipments For Hort . Wing . Raising Of Boundary Wall And Construction Of Walkway In Dda Park Near Wazirpur Industrial Area .

Key Value

Document Fees
Refer document
EMD
INR 39839.0 /-
Tender Value
INR 19.91 Lakhs /-

BOQ Items

Name of Work: M/o park plantation truck and other equipments for Hort. Wing. S.H.:- Raising of Boundary Wall and Construction of Walkway in DDA Park Near Wazirpur Industrial Area.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a)All kinds of soil. BI01010001010000000000000515BI0100001113 88 Cum
2 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size). BI01010001010000000000000515BI0100001114 29 Cum
3 2.1 b) (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). BI01010001010000000000000515BI0100001115 6 Cum
4 3 Brick work with C&D Waste Cement Bricks of Class Designation M10 size 230 x 110 x 75 mm from approved manufacturer in foundation and plinth in Cement Mortal 1:6 (1 Cement : 6 Coarse Sand Zone -III) BI01010001010000000000000515BI0100001116 20 Cum
5 4 Brick work with C&D Waste Cement Bricks of Class Designation M10 size 230 x 110 x 75 mm from approved manufacturer in super structurer above plinth level up to 2 level in all shapes and sizes in Cement Mortal 1:6 (1 Cement : 6 Coarse Sand Zone -III) BI01010001010000000000000515BI0100001117 91 Cum
6 5 12 mm cement plaster of mix : a) 1:6 (1 cement: 6 coarse sand) BI01010001010000000000000515BI0100001118 505 sqm
7 6 15 mm cement plaster on rough side of single or half brick wall of mix: a) 1:6 (1 cement: 6 coarse sand) BI01010001010000000000000515BI0100001119 501 sqm
8 7 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. a) In cement mortar cum BI01010001010000000000000515BI0100001120 29 Cum
9 8 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) BI01010001010000000000000515BI0100001121 12 Cum
10 9 Finishing walls with Acrylic Smooth exterior paint of required shade : a) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) BI01010001010000000000000515BI0100001122 1006 sqm
11 10 Finishing walls with Acrylic Smooth exterior paint of required shade : a)Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. BI01010001010000000000000515BI0100001123 54 sqm
12 11 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. BI01010001010000000000000515BI0100001124 3 sqm
13 12 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : a) 300x16 mm. BI01010001010000000000000515BI0100001125 3 each
14 13 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : a) 125 mm BI01010001010000000000000515BI0100001126 6 each
15 14 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. a) Using flats 30x6mm for diagonal braces and central cross piece BI01010001010000000000000515BI0100001127 1.5 sqm
16 15 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : a) 25 mm thick. BI01010001010000000000000515BI0100001128 50 sqm
17 16 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a) Two or more coats on new work. BI01010001010000000000000515BI0100001129 11 sqm
18 17 Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller. BI01010001010000000000000515BI0100001130 912 sqm
19 18 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). BI01010001010000000000000515BI0100001131 15 Cum
20 19 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. BI01010001010000000000000515BI0100001132 182 Cum
21 20 ADD: 1% COST INDEX BI01010001010000000000000515BI0100001133 1 rs
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail