Military Engineer Services-MES has published Construction Of Addl Toilets And Bathing Area In The Barrack , Provn Of A Separate Staircase For The Mp Women , Construction Of Partition Wall And Const Of Toilet For Mp Women In The Office Complex Under Age Br-I At Ge West Bareilly. Submission Date for this Tender is 06-11-2020. Barrack Tenders in GE WEST BAREILLY Uttar Pradesh. Bidders can get complete Tender details and download the document.
Name of work :- Construction of addl Toilets and bathing Area in the Barrack, Provn of a separate staircase for the MP women, Construction of partition walls & Construction of toilet for MP Women in the Office Complex under AGE B/R-I at GE (W) Bareilly. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed. | 4.1 | Cum | |
2 | 2 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed | 1 | Each | |
3 | 3 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil. | 120 | Sqm | |
4 | 4 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil. | 65 | Cum | |
5 | 5 | M&L for plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundation. | 12.75 | Cum | |
6 | 6 | M & L for brick work with fly ash bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. | 105 | Cum | |
7 | 7 | M & L for brick work with fly ash bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. | 40 | Sqm | |
8 | 8 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. | 30 | Cum | |
9 | 9 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils | 53 | Cum | |
10 | 10 | Spreading & levelling in layers n exc. 25 cm thick & well ramming incl. watering as required | 6 | Cum | |
11 | 11 | M & L for providing re-inforced cement concrete (nominal mix) type B1 1:2:4 using 20mm graded aggregated as in columns ,pillars ,posts etc. | 2 | Cum | |
12 | 12 | All as per item No 11 but for beams,cantilevers bressummers,lintels over 1.5m span. | 1.5 | Cum | |
13 | 13 | All as per item No.11 but for slabs ,supported on walls,beams and columns in floors,roofs,.landing , balconices,canopies ,deck slabs and in shelves and the like. | 8.5 | Cum | |
14 | 14 | M & L for formwork to sides of concrete foundations,footing ,bases of columns,raft and raft beams sides and soffits of foundation and plinth beams and similars work,vertical or battern,rough finished surfaces of concrete flat. | 33.5 | Sqm | |
15 | 15 | M & L for formwork to sides of pillars,posts,columns etc square,rectangular,rough finished surfaces of concrete. | 34.5 | Sqm | |
16 | 16 | M & L for form work to sides and soffited to floors or roof beams beam haunching, bressmers, lintels, cantilever shelevs including suports,over hangs etc also etc splays between floors and beams etc. | 33.5 | Sqm | |
17 | 17 | M & L for formwork to soffits of suspended slabs such as roof slabs,floors slabs,landings and similar works not exceeding 200mm thick , horizontal or sloping) rough fixed surfaces of cone, flat. | 78 | Sqm | |
18 | 18 | M & L PCC 1:2:4 type B1 using 20mm graded cruched stone aggregate as in copings as directed including necessary farm work etc. | 1.7 | Cum | |
19 | 19 | M & L for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. | 0.05 | Cum | |
20 | 20 | S & F of 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed. | 2.1 | Sqm | |
21 | 21 | S & F of 35 mm thick (Batten thickness) 1st class hardwood (SHISHAM) Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. | 2.1 | Sqm | |
22 | 22 | S & F 100 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed. | 6 | Each | |
23 | 23 | S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed. | 4 | Each | |
24 | 24 | Supply and fix mild steel, sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate length of bolt 300 mm complete all as specified and directed. | 1 | Each | |
25 | 25 | S & F 150 mm long mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed. | 3 | Each | |
26 | 26 | M & L for rubber moulded chequered cement concrete tiles of size 300X 300 X 25 mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor and laid over 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed. | 55 | Sqm | |
27 | 27 | S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. | 0.5 | Sqm | |
28 | 28 | M&L for 40 mm thick Damp Proof Course in cement concrete 1:2, Type B-0 to horizontal or vertyical surfaces including necessary formwork | 8 | Sqm | |
29 | 29 | Formwork to sides and soffits of floor or roof beam rough finished | 15 | Sqm | |
30 | 30 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) | 26 | Sqm | |
31 | 31 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia | 1200 | Kg | |
32 | 32 | Ditto as item No 31 above but 6mm to 8mm dia bars. | 400 | Kg | |
33 | 33 | Ditto as item No 32 above but 5 to 10mm dia bars as in stirrups | 500 | Kg | |
34 | 34 | M&L for RCC 1:1.5:3 type A1 using 20mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span | 0.8 | Cum | |
35 | 35 | M&L for RCC 1:1.5:3 type A1 using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like | 2.3 | Cum | |
36 | 36 | M&L for broken stone or boulder of Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface | 9 | Cum | |
37 | 37 | M&L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub base. | 55 | Sqm | |
38 | 38 | M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate . | 50 | Sqm | |
39 | 39 | M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and smooth (without using extra cement) | 550 | Sqm | |
40 | 40 | M&L Rendering 15mm thick on brick work or concrete surface in cement mortar 1 : 6 and finished even and smooth without using extra cement. | 150 | Sqm | |
41 | 41 | M&L for 10 mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement | 80 | Sqm | |
42 | 42 | M&L for 15 mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 | 50 | Sqm | |
43 | 43 | M&L for non skid ceramic colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0. 11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles. | 50 | Sqm | |
44 | 44 | M&L for 10mm thick in CM 1:4 rendering/backing coat for skirting/dado on brick or concrete surfaces rough finished | 170 | Sqm | |
45 | 45 | M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match | 170 | Sqm | |
46 | 46 | S & F Vitreous China squatting pan , "Orrissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe complete including provision of lime concrete. | 2 | Each | |
47 | 47 | S&F Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed | 2 | Each | |
48 | 48 | S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed | 2 | Each | |
49 | 49 | Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs. | 4 | Each | |
50 | 50 | S&F in repair vitrous china wash hand basin with fixing accesories ,set size 480X560X195mm with full padestal complete all as specified and as directed. Make - Jaquar (ARS -WHT-39801). | 2 | Each | |
51 | 51 | Supply only Pillar taps 15mm bore dia of pipe, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. | 3 | Each | |
52 | 52 | Supply and fix PVC pipe of bore 32 mm waste pipe to WHB all as specified. | 3 | Each | |
53 | 53 | Suppy and fix 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. | 3 | Each | |
54 | 54 | S&F of PTMT towel rail 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) | 4 | Each | |
55 | 55 | S & F of soap dish,stainless steel size fixed to plugs with chromium palted brass screws of standard. | 4 | Each | |
56 | 56 | S&F Stop valves (angle cock), cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed 15 mm bore. | 4 | Each | |
57 | 57 | S&F for 15 mm bore stop cocks, fancy type, chromium plated reduce body, long shunk, cap (conceal type) screwed down high pressure screwed both ends for iron pipe or for union etc as in repair.(Make Continental series of Jaguar or equivalent) | 7 | Each | |
58 | 58 | Supply and fixed 15 mm bore Bib taps, brass chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule | 10 | Each | |
59 | 59 | Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm. | 4 | Each | |
60 | 60 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore | 12 | Rm | |
61 | 61 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore fixed | 15 | Rm | |
62 | 62 | S&F PVC (SWR) bends any radius 110mm bore . | 6 | Each | |
63 | 63 | S&F PVC (SWR) bends any radius 110mm bore with access doors in | 6 | Each | |
64 | 64 | S&F PVC (SWR) bends any radius 75mm bore. | 6 | Each | |
65 | 65 | S&F PVC (SWR) bends any radius 75mm bore with access doors. | 6 | Each | |
66 | 66 | S&F PVC (SWR) Vent cowls of bore 110mm in repairs | 2 | Each | |
67 | 67 | M&L for 3 coats of white wash on newly plastered ceiling surfaces including preperation | 80 | Sqm | |
68 | 68 | M&L for two coats of cement based paint over a coat of cement primer on newly plastered surfaces of walls including preperation | 550 | Sqm | |
69 | 69 | M & L for three coat of white wash on new surface of wall including preparation | 150 | Sqm | |
70 | 70 | S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 liter. | 2 | Each | |
71 | 71 | S&F Tubes, ‘Medium grade’ galvanised, with all fittings and fixed comp to walls and ceilings or laid in floors of 15 mm bore | 50 | RM | |
72 | 72 | Cutting chases, pinning in, in brick walls and making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills sunshades, shelves etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth all as spd and directed | 35 | RM | |
73 | 73 | S&F Tubes, ‘Medium grade’ galvanised, with all fittings and fixed comp to walls and ceilings or laid in floors of 20 mm bore | 20 | RM | |
74 | 74 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore | 2 | Each | |
75 | 75 | S&F of Ball valves high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed to 20mm bore pipe. | 2 | Each | |
76 | 76 | M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, finished even and smooth w/o using extra cement. | 30 | Sqm | |
77 | 77 | M&L salt glazed stone wave gully traps square or rounded mouthed type & fix 150 x 150 mm fixed in cement concrete complete. | 6 | Each | |
78 | 78 | S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc. | 42 | RM | |
79 | 79 | S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction all as specified. | 14.92 | Sqm | |
80 | 80 | S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21. | 30 | Each | |
81 | 81 | S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed. | 20 | Each | |
82 | 82 | S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised | 20 | Each | |
83 | 83 | S&F steel windows with or ventilators, fixed type, with glazing bars | 4.25 | Sqm | |
84 | 84 | M&L painting to new steel surface exc 10 cm width or girth with two coats of synethic enamel paint including preparation of new surface over a coat of primer complete all as spd and directed | 6 | Sqm | |
85 | 85 | S&F 3mm thick sheet figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete. | 3.15 | Sqm | |
86 | 86 | S&F shower rose swivel type PTMT any colour for fixing with 15mm bore pipe min wt 40gm. | 7 | Each | |
87 | 87 | S&F grating doom 125 mm dia with waste holes of PTMT (minimum weight 40 gms) | 8 | Each | |
88 | 88 | M& L salt glazed stone ware 100mm internal dia pipes laid in trenches and jointed socket end with packed spunyarn and cement mortar1:1. | 12 | Rm | |
89 | 89 | M&L for Cement Concrete 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 100 mm dia SWG pipe. | 12 | RM | |
90 | 90 | M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregated) set in CM 1:4 as in benching to manholes. | 0.2 | Cum | |
91 | 91 | M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregated) as in copping incl necessary form work all as specified. | 0.2 | Cum | |
92 | 92 | M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate as in pre-cast cover slabs for manholes incl necessary form work set in CM 1:4 all as specified. (Reinforcement will be measured & paid separately) | 0.2 | Cum | |
93 | 93 | M&L for salt glazed stone ware drain pipes laid in trenches and jointed as specified of dia150mm internal bore | 30 | Rm | |
94 | 94 | M&L for PCC 1:4:8 type D-2 as concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for CI pipes of 150mm bore complete all as specified. | 30 | Rm | |
95 | 95 | M&L cement concrete 1:2:4 type B-1( 20 mm graded stone agg. ) in surface channels and drains | 1 | Cum | |
96 | 96 | M&L for providing cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in copings. | 0.5 | Cum | |
97 | 97 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl moulds, forms, mitred/stripped ends complete | 50 | RM | |
98 | 98 | Add or deduct to above mentioned item No hereinbefore for each 25 mm girth or part thereof over or under 30 cm girth all as specified. | 150 | RM | |
99 | 99 | S&F of Mild steel works as in posts, struts, gates etc., in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets/horizontal bars etc. for securing wire mesh including necessary drilling, welding, bolting or riveting etc and similar conforing to Fe 290 Gde E-165 complete. | 400 | Kg | |
100 | 100 | M & L Point wiring with 1.5 Sqmm(Nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor single core cable (FRLS)drawn through and including PVC non metallic conduit of 20 mm dia ISI marked with complete accessories,including sunk mild steel 1.6 mm thick terminal boxes with 3 mm thick bakelite sheet top cover ISI marked complete including PVC insulated and unsheathed single core multistranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth and earth dolly complete all as specified and directed for the following :- | |||
101 | 100.01 | One light point controlled by one one way switch | 16 | Point | |
102 | 100.02 | One exhaust fan point controlled by one one way switch | 2 | Point | |
103 | 100.03 | One 5 pin 5 Amp socket out let point controlled by one switch on same board. | 1 | Point | |
104 | 101 | All as per item 3 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified. | 2 | Point | |
105 | 102 | S&F switch piano flush type polycarbonate single pole one way 5 Amps. | 19 | Each | |
106 | 103 | S&F socket outlet polycarbonate 2 in 1, 3 pin 15 Amps flush type. | 2 | Each | |
107 | 104 | S&F Ceiling rose 3 phase/PVC/polycarbonate, insulated body complete all as specified and directed. | 8 | Each | |
108 | 105 | S&F LED retrofit tube with PVC extruded battern 20watt 4 feet white Make C&S , Crompton greaves, Philips,Surya complete all as specified and directed. | 4 | Each | |
109 | 106 | S&F LED bulk head luminaries with lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 volt 50 Hz including 6 Watt LED complete all as speified and directed. | 3 | Each | |
110 | 107 | S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED retrofit lamp B-22 holders base with polycarbonate body and aluminium heat sink warm white all as specified. | 4 | Each | |
111 | 108 | S&F double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 8 ways Make Indo Asain or Equivalent | 1 | Each | |
112 | 109 | S&F Miniature circuit breakers (MCBs) ISI marked 240 Volt, 50 Hz, single pole 6-32 Amps, breking capacity 10 KA Make Indo Asian or equivalent. | 6 | Each | |
113 | 110 | S&F Miniature circuit breakers (MCBs) ISI marked 240 Volt, 50 Hz, SPN 40-63 Amps, breking capacity 10 KA.complete all as specified and directed. | 1 | Each | |
114 | 111 | M&L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connecting to main switch or switch board complete and incl PCC masonry pit of 300x300x300mm interier diamentions in PCC 1:2:4 type B1 RCC cover with GI frame, charcoal and common salt 15cm in layers all round the earth plate, 15mm dia GI watering pipe, a funnel with wire mesh should be provided on top of watering pipe complete all as specified as per electric plate No 3of SSR 2009 including testing after completion. | 1 | Each | |
115 | 112 | Supply and fixing 1100 volt grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connectiuons suspended by insulating hangers not more than 1 meter apart including 4 mm dia suspension wire, one twin core cable flat or circular of size 6 Sqmm all as specified. | 70 | RM | |
116 | 113 | Supply, installing, testing and commissioning exhaust fans heavy duty 300 mm sweep, 230 volt, AC, 50 Hz single phase with louvers make Standard complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc all as specified. | 2 | Each | |
117 | 114 | S&F in replacement mirror light fitting of 1 x 9 watt LED type of size 2 fit , clear acrylic cover including mounting on wall complete all as specified and directed. | 2 | Each | |
118 | 115 | Supply & Fixing security light fitting, LED type, 20 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. | 4 | Each | |
119 | 116 | Supply and laying steel water tubing medium grade of 20 mm bore fixed with wall/laid in floor with and including all GI fittings as required at site complete all as specified and directed ; make : TATA/JINDAL of equivalent | 30 | RM | |
120 | 117 | S&F gate valve of 20 mm sizes as specified and directed. Make :NMV, ZOLOTO, LEADER or eqvt | 2 | Each | |
121 | 118 | Notes : \n |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail