Military Engineer Services-MES has published Repair Maintenance To Joinery , Floor , Roof , Sanitary Fittings And Sewage System At Asc Centre College , Asmt , 49 Mvh And At Domlur Married Accn Under Ge Central Bangalore. Submission Date for this Tender is 02-11-2020. Shed Construction Tenders in BANGALORE Karnataka. Bidders can get complete Tender details and download the document.
Name of Work: REPAIR/MAINTENANCE TO JOINERY, FLOOR, ROOF, SANITARY FITTINGS AND SEWAGE SYSTEM AT ASC CENTRE & COLLEGE, ASMT, 49 MVH AND AT DOMLUR MARRIED ACCN UNDER GE (CENTRAL) BANGALORE | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water removing the materials out side MD land complete all as specified and directed \n | 80 | SQM | |
2 | 2 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads removing the materials out side MD land complete all as specified and directed. | 55 | SQM | |
3 | 3 | Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level) removing the materials out side MD land complete all as specified and directed. | 22 | CUM | |
4 | 4 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc removing the materials out side MD land complete all as specified and directed.\n | 3 | CUM | |
5 | 5 | Demolition of stone slabs of any description and thickness in floors/ walls laid, bedded and pointed in any mortar etc complete including removing the same and debris outside MD land all as directed. | 0.45 | TEN SQM | |
6 | 6 | Taking down chowkats or frame, not exceeding 1.5 Sqm in each with shutters (without taking off shutter from the frame) complete all as specified and directed. | 55 | EACH | |
7 | 7 | Taking down chowkats or frames, exceeding 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.\n | 30 | EACH | |
8 | 8 | Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed. | 40 | LEAF | |
9 | 9 | Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed. | 20 | LEAF | |
10 | 10 | Taking down shutters, not exceeding 1.0 sqm in each and refixing shutter in the same opening including easing & adjusting complete all as specified and directed.\n | 25 | LEAF | |
11 | 11 | Taking down shutters, exceeding 1.0 sqm but n.exc. 2 Sqm in each and refixing shutter in the same opening including easing & adjusting complete all as specified and directed.\n | 45 | LEAF | |
12 | 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing the rubbish off the premises removing the materials out side MD land complete all as specified and directed. | 444 | SQM | |
13 | 13 | S & F well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints including treating the timber libarally brushed at least twice with oil or kerosene based solusion of chlorophyrifos 20EC 1.0 % (by weight) concentration complete all as specified and as directed. | 0.5 | CUM | |
14 | 14 | M&L for 35 mm thick 2nd class hard wood factory made glazed/gauzed skeleton shutters for door, open rebated and prepared to receive glass, gauze etc (without sash bars), edges framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc; size of the members of shutters as specified in SSR Part- I, Section 8, clause 8.24(a) complete all as directed. | 31 | SQM | |
15 | 15 | S & F 30 mm thick, factory made second class hardwood glazed and skeleton shutters as in windows/ventilators open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded complete all as specified and directed in SSR Part I Section 8 clause 8.24 (b). | 18 | SQM | |
16 | 16 | S&F 35mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter all as specified. | 34 | SQM | |
17 | 17 | S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including timber bead complete all as specified and directed.\n | 12 | SQM | |
18 | 18 | S & F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including timber bead complete all as specified and directed.\n | 45 | SQM | |
19 | 19 | S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed | 20 | SQM | |
20 | 20 | S&Fin repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed | 70 | SQM | |
21 | 21 | S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. | 80 | SQM | |
22 | 22 | S & F 4 mm thick, Figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.\n | 10 | SQM | |
23 | 23 | M&L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination and 3mm thick teak wood beading/edging fixed with screws to timber frame work, complete, as specified and directed | 20 | SQM | |
24 | 24 | S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.\n | 145 | RM | |
25 | 25 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.\n | 48 | SQM | |
26 | 26 | S & F 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. | 200 | EACH | |
27 | 27 | S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. | 153 | EACH | |
28 | 28 | S & F 100 mm size, butt hinges, stainless steel with cadmium coated screws complete all as specified and directed. | 57 | EACH | |
29 | 29 | S & F 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed. | 115 | EACH | |
30 | 30 | S & F 100 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed. | 190 | EACH | |
31 | 31 | S & F in repair 100 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed. | 30 | EACH | |
32 | 32 | S & F in repair 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed. | 63 | EACH | |
33 | 33 | S & F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.\n | 115 | EACH | |
34 | 34 | S & F 100 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.\n | 70 | EACH | |
35 | 35 | S & F in repair 100 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.\n | 20 | EACH | |
36 | 36 | S & F in repair 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.\n | 48 | EACH | |
37 | 37 | S & F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed. | 35 | EACH | |
38 | 38 | S & F in repair aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed. | 40 | EACH | |
39 | 39 | S & F 100mm aluminium anodised, hasp and staple, safty type, with hinge pin, including bolt to hinge plate and fixed with screws complete all as directed. | 20 | EACH | |
40 | 40 | S & F in repairs, 300 mm long, mild steel, arrow pattern springs incuding roller and roller plate complete all as specifed and directed. | 15 | EACH | |
41 | 41 | S&F in repair aluminium anodised body and tounge door stopper with hard drawn steel spring, 100mm size fixed to door all as directed. | 50 | EACH | |
42 | 42 | S&F in repair 20mm dia aluminium anodised decorative type curtain rods all as specified and directed. | 42 | RM | |
43 | 43 | S&F in repair steel decorative type curtain brackets all as specified and directed. | 30 | PER PAIR | |
44 | 44 | S & F in repair aluminium (extruded section body) door closer hydraulically regulated, designated No 3 universal aluminium (extruded section) body, suitable for aluminium door shutters of 851 to 1000mm width and weight between 61 to 80 KG. | 8 | EACH | |
45 | 45 | S & F aluminium anodised coloured powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows and ventilators with one or more rebates including jointing cleats for fixing etc including taking down old unserviceable frame. | 50 | KG | |
46 | 46 | S & F aluminium anodised coloured powder coated (minimum thickness of powder coating 50 micron) door shutter side hung type with style rails (Top, Bottom & lock rail) Top rail meeting style, lock rail of size 48 x 44mm, bottom rail size 108 x 44mm, all are made from anodised aluminium section including necessary jointing cleat, glazing clips, rubber packing, anodised aluminium snap beading, screws of suitable size& two numbers aluminium anodised handle of suitable size, etc complete all as specified and directed including taking down existing unserviceable shutters. \n(Note : Thickness of aluminium section shall not be less than 1.5 mm). | 10 | SQM | |
47 | 47 | S&F aluminium anodised coloured powder coated (minimum thickness of powder coating 50 micron) fixed/sliding type window/ventilators, aluminium sections weighing not less than 0.50kg per metre, all are made of from aluminium anodised section including necessary track, jointing cleat, glazing clips, rubber packing anodised aluminium snap beading, screws of suitable size and stainless steel wire cloth, locking arrangement, etc complete all as specified and directed by the Engr-in-Charge including taking down existing unserviceable shutters. | 10 | SQM | |
48 | 48 | S & F 5mm thick sheet glass, ordinary quality in area exceedind 0.50 sqm in each pane | 5 | SQM | |
49 | 49 | M & L for 75mm thick Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-base of floor, etc complete all as specified and directed. | 140 | SQM | |
50 | 50 | M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in base of flooring, etc and finished the surface fair to receive top layer screed bed complete all as specified and directed. | 190 | SQM | |
51 | 51 | M & L for 40 mm thick, plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floors laid in panels, finishing the surfaces even & smooth with using extra cement complete all as specified and directed. \n | 60 | SQM | |
52 | 52 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection laid in proper slope/gradient etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed. | 60 | SQM | |
53 | 53 | S & F 3 mm thick, 38mm wide glass dividing strips and inserted in position to conform to design as required complete all as specified and directed. | 20 | RM | |
54 | 54 | M&L for machine cut cudappa stone slab 20 to 25mm thick laid and and jointed in grey neat cement slury and pointed in coloured cement to match with the shade of the stone slab including providing 20mm thick screed bed in CM 1:4 all as directed. | 4.5 | SQM | |
55 | 55 | M & L for precast chequered cement concrete tiles of size 20cm x 20cm x 20mm thick, as in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and directed.\n | 110 | SQM | |
56 | 56 | M & L for non-skid, ceramic, coloured tiles, Grade B II(a), 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.\n | 100 | SQM | |
57 | 57 | M & L for non-skid, ceramic, coloured tiles, Grade B II(a), 8 to 10mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.\n | 80 | SQM | |
58 | 58 | M & L for ceramic, coloured tiles 7 to 8 mm thick as in skirting/ dado/ vertical surface to match the length of floor tile procured under No 57 above including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed. | 10 | SQM | |
59 | 59 | M & L for glazed ceramic, coloured tiles, Grade B III, 7 to 8 mm thick area of each tiles not less than 0.06 sqm as in skirting/ dado/ vertical surface including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed. | 110 | SQM | |
60 | 60 | M & L for Vitrified ceramic, designed, coloured tiles, Grade B I(b), 10 mm thick, (square/rectangular) polished, area of each tiles exc 0.36 sqm but not exc 0.42 sqm, in floors, etc including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. | 40 | SQM | |
61 | 61 | All as per item No 60 above/herein-before but in vertical surfaces including skirting, dados and risers to steps etc to match the length of floor tiles including 10 mm thick screed bed in cement mortar 1:3 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. | 4 | SQM | |
62 | 62 | M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed. | 0.2 | CUM | |
63 | 63 | S & F Mild steel small articles using flat iron such as band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290, Gde E-165 including retaining with tar or coat tar black paint complete all as specified and as directed. | 20 | KG | |
64 | 64 | M&L for precast cement concrete block masonry type C1, 1:3:6 (20 mm graded granite stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. | 3 | CUM | |
65 | 65 | M & L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. | 160 | SQM | |
66 | 66 | M & L for rendering 15 mm thick in two layer (10mm + 5mm thick) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with water proofing compound at top 5mm thick layer by weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). | 20 | SQM | |
67 | 67 | M & L for rendering 15 mm thick on stone masonry surfaces in cement mortar 1:3, mixed with water proofing compound at top 5mm thick layer by weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). | 10 | SQM | |
68 | 68 | "Supply only" integral water proofing compound (ISI marked) complete all as specified and directed. (Make : Dr FIXIT/Fosroc/choksey) | 3 | KG | |
69 | 69 | M & L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceilings (sunshed, chajja, fins etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed. | 20 | SQM | |
70 | 70 | M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.\n | 20 | SQM | |
71 | 71 | M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. | 40 | SQM | |
72 | 72 | M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. | 120 | SQM | |
73 | 73 | M & L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. | 20 | SQM | |
74 | 74 | M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 145 | SQM | |
75 | 75 | M & L for preparing old plastered surfaces of walls and applying one coat of distemper-oil-emulsion complete all as specified and directed.\n | 2100 | SQM | |
76 | 76 | M & L for Preparation of old surfaces walls and applying one coat of white wash complete as specified and directed. | 100 | SQM | |
77 | 77 | M & L for Preparation of old surfaces ceilings and applying one coat of white wash complete as specified and directed. | 60 | SQM | |
78 | 78 | M & L for Preparation of old surfaces walls and applyingtwo coats of white wash complete as specified and directed. | 450 | SQM | |
79 | 79 | M & L for Preparation of old surfaces ceilings and applying two coats of white wash complete as specified and directed. | 180 | SQM | |
80 | 80 | M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in padding over roof/ chajja etc and finished the surface even and smooth without using extra cement complete all as specified and directed. | 130 | SQM | |
81 | 81 | M & L for removing existing water proofing treatment along with PVC sheets disposing out of MD land/premises and rendering 10mm thick in CM 1:4 & Applying oil bound bitumen primer @ 0.40 Kg/Sqm and providing 3 mm thick APP membrane weighing not less than 3.0 to 3.2 kg/sqm reinforced with non woven polyester matt weighing not less than 180 gm /sqm having softening point not less than 140 centigrade, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg /Sqm on top of membrane surface and then finished with solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm complete all as specified and as directed. | 130 | SQM | |
82 | 82 | S & F in repair 0.63 mm thick galvanised steel sheet having zinc coating of 120gm per square metre conforming to IS -277, covering to door shutters and chowkats fixed with steel screws complete all as directed. | 3 | SQM | |
83 | 83 | Taking up or down 20mm bore, Steel tubing and connections. \n \n | 110 | RM | |
84 | 84 | S&F rotational moulded polyethylene water storage tanks 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple suitable for HDPE water tank, 20mm bore gun metal gate/globe valve with iron wheel head including taking down old unserviceable water tank of same capacity complete all as specified and directed. | 2 | EACH | |
85 | 85 | S&F rotational moulded polyethylene water storage tanks 750 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple suitable for HDPE water tank, 20mm bore gun metal gate/globe valve with iron wheel head including taking down old unserviceable water tank of same capacity complete all as specified and directed. | 3 | EACH | |
86 | 86 | S&F rotational moulded polyethylene water storage tanks 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple suitable for HDPE water tank, 20mm bore gun metal gate/globe valve with iron wheel head including taking down old unserviceable water tank of same capacitycomplete all as specified and directed. | 6 | EACH | |
87 | 87 | Cleaning and removing all scales and dirts etc from tanks and from mouth of circulating pipes etc exceeding 500 litre not exc1000 litres. | 240 | EACH | |
88 | 88 | Supplying and laying of 20mm dia CPVC pipes (ISI marked) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. | 110 | RM | |
89 | 89 | S&F in Repair Vitreous China Wash hand basin , white flat back size 550x400 mm including a pair of mild steel angle iron brackets duly painted, erected/embeded in wall, providing Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & 32 mm dia LDPE PVC waste pipe, PVC connection 15 mm size 600 mm long including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge. | 2 | EACH | |
90 | 90 | S&F in repair 600x450 mm bevelled edge mirror of selected quality glass,mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. | 15 | EACH | |
91 | 91 | S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with white PVC seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed. | 5 | EACH | |
92 | 92 | S&F in Repair Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest S or P trap etc. including 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long and 32mm dia flush pipe, S or P Trap & Provision of concrete bedding and making good to floor all as specified & directed by Engineer-in-charge. | 5 | EACH | |
93 | 93 | S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe 30mm dia, float and handle including PVC connection pipe of 15mm dia, 600mm long, brackets complete all as specified and directed. | 20 | EACH | |
94 | 94 | S&F in repair 15 mm bore bib taps cast copper alloy chromium plated with capstan head screwed down to iron pipe, fancy type concealed type complete all as specified and directed | 25 | EACH | |
95 | 95 | S&F in repair 15 mm bore stop valves/angle valve cast copper alloy chromium plated fancy type with long shank and cup, concealed type, screwed down to iron pipe complete all as specified and directed | 15 | EACH | |
96 | 96 | S & F in repairs PVC 32mm dia wash basin waste pipe\n | 120 | EACH | |
97 | 97 | S&F in repair 15 mm bore, PTMT, bib taps with flange with capstan head screwed down to iron pipe complete all as specified and directed. Make: PRAYAG Cat No 121 or equvelent | 180 | EACH | |
98 | 98 | S & F in repairs PVC water tank cover for any size/capacity tank. Make : Sintex/Polycon/Rotex\n | 20 | EACH | |
99 | 99 | S & F in repairs chromium plated soap dish, 150mm, fixed to wall with chromium plated screws complete all as specified and directed. Make : Hindware/Parryware/Prayag\n | 20 | EACH | |
100 | 100 | S & F in repairs brass chromium plated shower rose and arm with or without swivel joints, 100mm size including fixing to iron pipe complete all as specified and directed. Make : CERA Cat No F 7020304 or equvelent of Make Hindware/Parryware/Prayag\n | 20 | EACH | |
101 | 101 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia 'D' type, 600mm long between flanges complete all as specified and directed.\n | 20 | EACH | |
102 | 102 | S & F in repairs chromium plated, 2 in 1, 15mm bib tap, quarter turn fancy type, with capstan head, screwed down, screwed for iron pipe or for union complete all as specified and directed. Make CERA Cat No CL 2016 or equvelent of Make Hindware/Parryware/Prayag\n | 20 | EACH | |
103 | 103 | S & F in repairs brass, chromium plated, 15mm bore wall mixer with L bend for mixing hot and cold water, screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and directed. Make: PRAYAG Cat No 8475 or equvelent of Make Hindware/Parryware/CERA\n | 6 | EACH | |
104 | 104 | S & F in repairs brass, chromium plated centre hole, 15mm bore basin mixer with long bend for mixing hot and cold water, screwed down, screwed for iron pipe and fixed complete all as specified and directed. Make: CERA Cat NO F2008461 8475 or equvelent of Make Hindware/Parryware/PRAYAG\n | 6 | EACH | |
105 | 105 | S & F in repairs brass, chromium plated silver colour toilet spray with 1 metre long silver colour hose pipe fixed to WC pan complete all as specified and directed. Make: CERA/Hindware/Parryware/PRAYAG\n | 15 | EACH | |
106 | 106 | S & F in repairs PVC connection pipe, 600mm long. Make: CERA/Hindware/Parryware/PRAYAG\n | 20 | EACH | |
107 | 107 | S & F in repairs PVC connection pipe, 450mm long. Make: CERA/Hindware/Parryware/PRAYAG\n | 20 | EACH | |
108 | 108 | S&F in repair steel chromium plated gratings, circular type, 100mm dia complete all as directed. | 30 | EACH | |
109 | 109 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 354X203mm | 5 | EACH | |
110 | 110 | S&F in repair plate rack made of stainless steel fixed to wall, size 800mmX 750mm X 250mm | 2 | EACH | |
111 | 111 | S & F 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with cement joints fixed to wall using MS holder bat, etc complete all as specified and directed. | 80 | RM | |
112 | 112 | S & F 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with cement joints fixed to wall, using MS holder bat etc complete all as specified and directed. | 80 | RM | |
113 | 113 | S & F 110 mm bore, PVC (SWR) bends of any radius with acess door complete all as specified and directed. | 6 | EACH | |
114 | 114 | S & F 75 mm bore, PVC (SWR) bends of any radius with acess door complete all as specified and directed. | 6 | EACH | |
115 | 115 | S & F in repair 75 mm dia outlet , PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. | 15 | EACH | |
116 | 116 | S&F PVC (SWR) junction single,(single T) 110 mm dia equal or unequal with access door complete all as specified and directed. | 3 | EACH | |
117 | 117 | S&F PVC (SWR) junction single,(single T) 75 mm dia equal or unequal with access door complete all as specified and directed. | 3 | EACH |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail