Military Engineer Services-MES has published Repair To Flooring , Joineries , Brick Work , False Ceiling , Roofing , Plinth Protection , Roof Treatment And Sanitary Fittings In Jne Md Accn , Age B/R-Ii Under Ge ( North ) Udhampur. Submission Date for this Tender is 02-12-2020. Shed Construction Tenders in UDHAMPUR Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 25-Nov-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-12-2020 |
Name of Work: REPAIR TO FLOORING, JOINERIES, BRICK WORK, FALSE CEILING, ROOFING, PLINTH PROTECTION, ROOF TREATMENT AND SANITARY FITTINGS IN JNE MD ACCN, AGE B/R-II UNDER GE (NORTH) UDHAMPUR | |||||
---|---|---|---|---|---|
Ser. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete all as specified and as directed by Engr-in-Charge. | 1 | 12 | Cubic metre |
2 | 2 | Dismantling wall and ceiling boards (fibre pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and as directed by Engr-in-Charge. | 2 | 270 | Square metre |
3 | 3 | False ceiling with fibre cement designer tile any colour painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the design (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross'T' at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills, light fittings, fixures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using Gl soffit cleats fixed to existing rafter, purlin, etc with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre- painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and refixed all existing electric wiring and fixture all complete at all heights as per direction of Engineer-in -Charge. | 3 | 270 | Square metre |
4 | 4 | Dismantling Plain, Corrugated, semicorrugated, etc. sheets in roof coverings, complete all as specified and as directed by Engr-in-Charge. | 398 | Square metre | |
5 | 5 | Pre-painted coloured corrugated profiled Galvalume/Zincalume sheet with min 0.50mm TCT with BTM of 0.45mm thick conforming to IS -513(AZ-150 GSM,Al Zn alloy metallic coating 550MPA yield stress as per AS-1397),as in roof covering/clading to wall fixed with self taping screws, colour/exterior coat of silicon modified polyster/ BHP x RW paint system 20 micron top coat applied over 5 micron primer and a micron polyster back coat applied over 5 micron primer,all fixed with galvanised self drilling self tapping fastener(12-14x55 with EPDM seals), complete all as specified and directed \n | 5 | 350 | Square metre |
6 | 6 | Pre-painted coloured plain steel profiled Galvalume/Zincalume sheet with Min 0.50 mm TCT with BTM of 0.45mm thick conforming to IS-513(AZ-150 GSM, Al Zn alloy metallic coating 550 MPA yield stress as per AS-1397) as roof ridge colour/exterior coat of silicon modified polyster/BHPxRW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer ,all fixed with Galvanised self drilling self-tapping fastener (12-14x55 with EPDM seals) complete all as specified and directed. \n | 6 | 18 | Square metre |
7 | 7 | Galvanised, corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with fixed with L-type or J-type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275 gram per squaremetre complete all as specified and directed. | 7 | 30 | Square metre |
8 | 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-Charge. | 3.5 | Quintal | |
9 | 9 | Mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and as directed by Engr-in-Charge. | 150 | Kilogram | |
10 | 10 | Mild steel Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails guides for sliding doors, and vertical posts of pipes sections fixed with angle cleats or other connecting plates, conforming to grade Fe-290 (E-165) complete all as specified. | 10 | 200 | Kilogram |
11 | 11 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. | 11 | 60 | Square metre |
12 | 12 | 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square or rectangle, area n exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-Charge.\n | 50 | Square meter | |
13 | 13 | 4 mm thick figured glass (frosted) ,pin head type and glazing with oil putty not exc 0.50 Sqm in each pane fixing to window/ventilator complete all as specified and as directed. | 13 | 10 | Square metre |
14 | 14 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt. ) , complete all as specified and directed by Engineer-in Charge. | 14 | 10 | Each |
15 | 15 | Description all as per item No 14 above but area exceeding 1.50 square metre and not exceeding 4 square metre each. | 15 | 10 | Each |
16 | 16 | Description all as per item No 14 above but area exceeding 1 square metre and not exceeding 2 square metre each. | 16 | 10 | Each |
17 | 17 | Pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 mm x 60 mm, including one shop coat of red oxide zinc chrome primer, complete all as specified and as directed by Engr-in-Charge. | 17 | 20 | Running metre |
18 | 18 | Description all as per item No 17 above but of frame size 105 mm x 60 mm. | 18 | 20 | Running metre |
19 | 19 | 35 mm thick, factory made, 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed by Engr in Charge. | 19 | 32 | Square metre |
20 | 20 | Description all as per item No 19 above but glazed and skeleton shutter with sash bar for glass/wire gauge. | 20 | 8 | Square metre |
21 | 21 | Factory made PVC door shutter 30 mm thick consisting of 24mm thick panel of hollow PVC profile and frame made out of 19 guage thickness MS tubes of section 19 x 19mm inserted horizontally inside the hollow section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick PVC sheet using screws. Hollow profile shall be lipped with 10mm (2 x 5mm) thick x 24 mm width on sides and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant prelam PVC sheet using solvent cement ob both sides of the panel, etc. complete all as specified and as directed by Engr-in-Charge and all as per manufacuturer's instructions. | 10 | Square metre | |
22 | 22 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing, complete all as specified and as directed by Engr-in-Charge. | 47 | Running metre | |
23 | 23 | 100mm butt hinges ,medium weight ,stainless steel all as complete all as specified and directed. | 23 | 30 | Each |
24 | 24 | 150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. (ISI Mark) | 24 | 20 | Each |
25 | 25 | 150 mm aluminium handles, extruded aluminium alloy handles, cast type, anodised complete all as specified and directed. (ISI Mark) | 25 | 20 | Each |
26 | 26 | Providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for, filling as in the pressed steel door frame/hold fast complete all as specified. | 0.1 | Cubic metre | |
27 | 27 | Dismantling of steel windows/ventilators any description and fixed in any position including grill etc, complete all as specified and as directed by Engr-in- Charge. | 27 | 35 | Square metre |
28 | 28 | Factory made mild steel ventilators or windowa box type with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer complete all specified.\nNote : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3.\nii) MS fillets, glazing, wire gauge shall be measured and paid for separately | 10 | Square meter | |
29 | 29 | Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified and as directed.\nNotye : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3\n(ii) MS fillets, glazing, wire gauge shall be measured and paid separately. | 29 | 25 | Square metre |
30 | 30 | Description all as per item No 29 here in before but without glazing bar complete all as specified and as directed.\nNote : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3\nii) MS fillets, glazing, wire gauge shall be measured and paid for separately | 25 | Square meter | |
31 | 31 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to FE 290-0 or Gde-E-165, complete all as specified and as directed. | 300 | Kilogram | |
32 | 32 | Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and as directed by Engr-in-Charge. | 60 | Square meter | |
33 | 33 | 200mm long, mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed by Engr-in- Charge. | 50 | Each | |
34 | 34 | 150 mm long, mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed by Engr-in- Charge. | 50 | Each | |
35 | 35 | 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and as directed by Engr-in-Charge. | 25 | Each | |
36 | 36 | Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed by Engr-in-Charge. | 7 | Square metre | |
37 | 37 | S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed by Engr-in-Charge. | 20 | Square metre | |
38 | 38 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed by Engr-in-Charge. | 1352 | Square meter | |
39 | 39 | 15 mm thick rendering in two layer (10mm + 5mm) on fair faces of brick /concrete on wall including facia chhajja etc.surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing Liquid water proofing compund in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed by Engr-in-Charge.\nNote : Water proofing compund to be measured and paid for separately as supply only. | 39 | 350 | Square metre |
40 | 40 | Supply only liquid water proofing compound, complete all as specified & directed by Engr-in-Charge. | 2.66 | Litres | |
41 | 41 | 10mm thick rendering on fair faces of brick or concrete surfaces of wall in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge. | 350 | Square metre | |
42 | 42 | 5mm thick rendering on brick or concrete surfaces as in ceiling in cement mortar 1:3, and finish the surface even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge. | 100 | Square metre | |
43 | 43 | Plain cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregates as in sunken floor/ foundatiom, complete all as specified and as directed by Engr-in-Charge. | 43 | 3 | Cubic metre |
44 | 44 | Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints through out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified. | 44 | 90 | Square metre |
45 | 45 | 25 mm thick, Plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed by Engr-in-Charge. | 45 | 50 | Square metre |
46 | 46 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge. | 46 | 542 | Square metre |
47 | 47 | Non skid, coloured ceramic jointfree/rectified tiles 8 to 9mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match,over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, complete all as specified and as directed by Engr-in-Charge. | 47 | 200 | Square metre |
48 | 48 | Non skid, light coloured, white printed ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement to match, including 10 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes , complete all as specified and as directed by Engr-in-Charge.\n(Makes: Kajaria/ H & R Johnson/ Cera/ Nitco/ Somani/ Orient Bell)\n | 48 | 60 | Square metre |
49 | 49 | Virified Ceramic tiles 10 mm thick any colour (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces over and including 15 mm thick screed bedding/ backing layer in CM 1:4, complete all as specified and as directed by Engr-in-Charge. | 80 | Square meter | |
50 | 50 | Vitrified tiles (double charged) of 10 mm thick any colour (square/ rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 1.00 sqm as in floors jointed in cement slurry and pointed in white or coloured cement to match the existing surfaces over and including 15 mm thick screed bedding/ backing layer in CM 1:4, complete all as specified and as directed by Engr-in-Charge. | 30 | Square meter | |
51 | 51 | Glazed coloured ceramic tiles 350x250mm or 450 x 350 mm and 6 to 7mm thick in vertical surfaces like dado/skirting, etc., set and jointed in neat cement slurry and pointed in coloured cement to match, including 10mm thick backing layer of cement mortar in 1:3 to receive tiles in verticle surfaces, complete all as specified and as directed by Engr-in-Charge. | 51 | 160 | Each |
52 | 52 | Udaipur Green marble slab 15-18 mm thick in shelves machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing ,rounding edges, complete all as specified. | 52 | 20 | Square metre |
53 | 53 | Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including Screed bed or bedding layer of mortar 20mm thick in cement mortar 1:3, complete all as specified. | 53 | 42 | Square metre |
54 | 54 | Water closet (Orissa pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) fixed in repairs complete all as specified. | 54 | 5 | Each |
55 | 55 | Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, fixed in repairs complete all as specified and as directed by Engr-in-Charge. | 5 | Each | |
56 | 56 | 10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete all as specified and as directed by Engr-in-Charge. | 15 | Each | |
57 | 57 | Taking up or down steel tubing of 15 mm bore with connections for cleaning for refixing or removing to store yard/from site, complete all as specified and as directed by Engr-in-Charge. | 57 | 104 | Running metre |
58 | 58 | Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc., 15 mm bore, complete all as specified and as directed by Engr-in-Charge. | 58 | 24 | Running metre |
59 | 59 | 15 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed by Engr-in-Charge. | 45 | Running metre | |
60 | 60 | 20 mm bore steel water tubing medium grade galvanised with and including all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed by Engr-in-Charge. | 60 | 35 | Running metre |
61 | 61 | Bib taps long body , cast copper alloy, chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm, fixed in repair, complete all as specified and as directed by Engr-in-Charge.\n. | 61 | 25 | Each |
62 | 62 | Stop valves, fancy type, chromium plated, cast copper alloy, with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm, fixed in repair , all as specified.\n | 25 | Each | |
63 | 63 | Angle valves, fancy type chromium plated cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm with adjustable flanges, fixed in repair, complete all as specified and as directed by Engr-in-Charge. | 30 | Each | |
64 | 64 | Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm/25mm (Minimum weight 210 gram) etc), incl dismantling existing water tanks, complete all as specified and as directed by Engr-in-Charge. | 64 | 10 | Each |
65 | 65 | Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm/25mm (Minimum weight 210 gram) etc), incl dismantling existing water tanks, complete all as specified and as directed by Engr-in-Charge. | 65 | 5 | Each |
66 | 66 | 15 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified. | 66 | 80 | Each |
67 | 67 | 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified. | 55 | Each | |
68 | 68 | Preparation of old steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide/ zink chrome primer complete all as specified. | 68 | 85 | Square metre |
69 | 69 | 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed by Engr-in- Charge. | 66 | Running metre | |
70 | 70 | 110 mm bore PVC SWR bends/ shoes any radius fixed in repairs, complete all specified and as Directed (ISI Marked) | 70 | 12 | Each |
71 | 71 | PVC SWR branch piece , single (single Y) equal or unequal 110 mm size fixed with joint sealent etc complete all specified and as Directed | 12 | Each | |
72 | 72 | 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed by Engr-in- Charge. | 42 | Running metre | |
73 | 73 | 75 mm bore PVC SWR bends/ shoes any radius fixed in repairs, complete all specified and as Directed (ISI Marked) | 73 | 8 | Each |
74 | 74 | 75mm Cast iron floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4). complete all as specified and as directed.(ISI Mark) | 74 | 15 | Each |
75 | 75 | Applying two coats of oil bound distemper over and including a coat of primer and 1 mm thick a layer of wall care putty including preparation of old plastered/ unplastered surfaces of wall, including complete removal of existing treatment complete all as specified & directed by Engr-in-Charge. | 75 | 450 | Square metre |
76 | 76 | Preparing plastered or unplastered old surfaces of wall and applying two coats of oil bound distemper, complete all as specified & directed by Engr-in-Charge. | 350 | Square meter | |
77 | 77 | Preparing new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper, complete all as specified & directed by Engr-in-Charge. | 77 | 350 | Square metre |
78 | 78 | Preparing newly plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified and as directed by Engr-in-Charge. | 78 | 350 | Square metre |
79 | 79 | Priming the sunken floor surface with bitumenous primer conforming to IS-3384 @ 0.3 litres/Sqm and applying a coat of hot blown bitumen conforming to IS-702 @ 1.2 Kg/Sqm and thereafter supply and laying. Polymeric membrane, five layered, of weight not less than 3kg per Sqm with centre layer core of 90 micron high molecular density polethylene film and bonded completely to the surface with end overlap of 15cm and side lap of 7.5 cm (overlap to be thermo fused by flame) followed by another coat of semi hot and blown 85/25 grade bitumen @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm, complete all as specified and as directed by Engr-in-Charge. | 15 | Square metre | |
80 | 80 | 600mmx450mm beveled edge mirror 5.5mm thick of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixing in repair, complete all as specified. | 10 | Each | |
81 | 81 | Vitreous china wash basin, white flat back size 550 x 400mm incl waste couping CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 incl PVC waste pipe 32mm dia & CP grating with holes with pedestal of china ware fixed in repairs complete, all as specified and as directed by Engr-in-Charge. | 10 | Each | |
82 | 82 | 18/19 mm thick block boards grade 2 quality enterior grade, Commercial type, ply wood face pannels and both face is covered with decorative face veneer fixed with screw or Steel fram/Timber frame incl teak wood lipping,6mm thick fixed with Nail complete all as specified and directed. | 82 | 15 | Square metre |
83 | 83 | 18/19mm thick Prelaminated particle board, termit proof, chemically well pressed, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, as in kitchen cabinet, cub boards, etc including 6mm thick teak wood beading all around complete all as specified and as directed by Engr-in-Charge. | 10 | Square metre | |
84 | 84 | 100 mm aluminium handles, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. (ISI Mark) | 84 | 8 | Each |
85 | 85 | 100mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified. | 85 | 4 | Each |
86 | 86 | Providing, Plain cement concrete 1:3:6, type C-1 (using 20 mm graded stone aggregates) in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and as directed by Engr-in-Charge. | 0.5 | Cubic metre | |
87 | 87 | Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified. | 87 | 15 | Running metre |
88 | 88 | 20 mm dia MS powder coated antique type curtain rods with bracket fixed to wall with suitable screws and onion type end brackets all as per approved design/colour/pattern, fixed in repair, complete all as specified and as directed by Engr-in-Charge | 80 | Running metre | |
89 | 89 | Taking out of existing roof treatment of any description from roof including cement plaster to expose the top and removing the debris to a distance exc. 200m and not exc. 250m, complete all as specified and as directed by Engr-in-Charge. | 100 | Square metre | |
90 | 90 | Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 10mm thick plastering in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric five layred APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.5 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm & including two coats of bituminous Aluminium paint, complete all as specified and as directed by Engr-in- Charge. | 100 | Square meter | |
91 | 91 | Plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed in repair, complete all as specified and as directed by Engr-in-Charge\n | 91 | 10 | Each |
92 | 92 | Hand shower (health faucet) brass CP with 8mm dia 1.0 meter long flexible tube with wall hook complete all as specified and as directed by Engr-in-Charge. | 10 | Each | |
93 | 93 | Water jet to EWC's with flexible pipe, chromium plated, suitable for 15 mm bore and making connections, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. | 15 | Each | |
94 | 94 | Brass chromium plated toilet paper holder, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. | 10 | Each | |
95 | 95 | Sinks made of stainless steel with draining board, made out of 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar including fixing cantilever brackets connecting union to pipe and 32mm dia GI pipe duly painted upto Nihani Trap or Floor trap complete as directed at site, overall size 915mmx460mm bowl size 410mm x 330mm x160mm, fixed in repair, complete all as specified. | 95 | 10 | Each |
96 | 96 | Stainless steel plate rack made out of 0.63mm thick steel sheet, minimum size 750 x 750 x 250mm of standard quality and shapes fixed in repairs complete all as specified and as directed by Engineer-in-charge. | 20 | Each | |
97 | 97 | Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and as directed by Engr-in-Charge. | 97 | 6 | Each |
98 | 98 | Towel Rail fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms),fixed in repairs, complete all as specified and as directed by Engr-in-Charge. | 4 | Each | |
99 | 99 | Mild steel body mortice lock, four levers vertical type size 100mm or above with two keys complete all as specified and as directed by Engr-in-Charge. | 5 | Each | |
100 | 100 | Brass chromium plated wall mounted mixture unit, fancy type, 2 in 1 system with provision for both hand shower and overhead shower complete with 1 mm long bend pipe connecting legs and wall flange for bore of pipe 15 mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. | 5 | Each | |
101 | 101 | Brass Chromium plated over head shower rose of dia 125mm with swivel joint fixed to pipe or union of 15mm bore, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. | 10 | Each | |
102 | 102 | Stainless steel soap dish holder, fixed to wall with wooden gutties with chromium plated brass screws, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. | 10 | Each | |
103 | 103 | 15mm bore centre hole basin mixer, non telephonic, without Popup waste system, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. | 5 | Each | |
104 | 104 | Tubular towel rails brass chromium plated, 20 mm dia, D type, 60 cm long between flanges, fixed with rawl plugs fixed in repairs complete alll as specified and as directed, | 25 | Each | |
105 | 105 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed by Engr-in-Charge | 15 | Each | |
106 | 106 | Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, fixing in repair, complete all as specified and as direceted by Engr-in-Charge. | 106 | 10 | Each |
107 | 107 | Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed by Engr-in-Charge | 107 | 16 | Cubic metre |
108 | 108 | Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, but except brick complete all as specified and as directed by Engr-in-Charge. | 108 | 15 | Cubic metre |
109 | 109 | Description all as per Srl iotem No 108 above but except bricks. | 109 | 1 | Cubic metre |
110 | 110 | Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius in half brick thick built in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge. | 110 | 10 | Square metre |
111 | 111 | Description all as per item No 110 above but except brick. | 111 | 5 | Square metre |
112 | 112 | 75 mm thick PCC 1:5:10 type E-2 using 40mm graded crushed stone aggregates as in sub base of finished the surface even and rough for laying floor finishes, complete all as specified and as directed by Engr-in-Charge. | 112 | 85 | Square metre |
113 | 113 | Coloured machine pressed / vibro mechenically floated interlocking cement paver block ISI marked, glossy finish, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of cement mixed with imported pigment, laid over and including 50mm thick sand filling including spreading, levelling, watering and well ramming complete all as specified and directed. Shape shall be approved by Engr-in-Charge. | 113 | 45 | Square metre |
114 | 114 | Chequered cement concrete tiles 20cm x 20cm x 25mm thick, with mixture of white & grey cement in equal proportion & no pigment set, jointed and pointed in neat cement slurry in floors, complete all as specified and as directed by Engr-in-Charge. | 40 | Square metre |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail