Municipal Adminitration And Water Supply Department-MAAWSD has published Construction Of Lpg Based Crematorium In Rajagori Burial Ground In Thanjavur City Municipal Corporation Under Smart City Program. Submission Date for this Tender is 28-10-2020. Cremetorium Tenders in Thanjavur Tamil Nadu. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of LPG based Crematorium in Rajagori Burial Ground in Thanjavur City municipal Corporation under Smart City program | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Boring, providing and installing Bored cast-in-situ reinforced cement Concrete pile of specified diametre and length below the Pile Cap in cement concrete M 25 Design mix using 20 mm and 10mm size H. B.G stone (machine crushed) including mixing concrete using machanical mixer machine and vibrating with machanical vibrator, but excluding cost of steel reinforcement, fabrication and placing the grills in postion and the cost of centering and strutting but including curing, finishing etc., complete . to carry a safe working load not less than specified, including Bentonite solution machinery charges labour chargres etc., all complete, as directed by the Departmental Officers. | |||
| 2 | 1.01 | 450mm | BI01010001010000000000000515BI0100001200 | 658 | Rm |
| 3 | 1.02 | 300mm | BI01010001010000000000000515BI0100001201 | 56 | Rm |
| 4 | 2 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete | |||
| 5 | 2.01 | For Foundation | BI01010001010000000000000515BI0100001202 | 171.253 | M3 |
| 6 | 3 | Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. | BI01010001010000000000000515BI0100001203 | 114.126 | M3 |
| 7 | 4 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification | BI01010001010000000000000515BI0100001204 | 122.858 | M3 |
| 8 | 5 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed | |||
| 9 | 5.01 | For Column | BI01010001010000000000000515BI0100001205 | 429.796 | M2 |
| 10 | 5.02 | For Plinth Beam | BI01010001010000000000000515BI0100001206 | 689.48 | M2 |
| 11 | 5.03 | For Beam and Roof | BI01010001010000000000000515BI0100001207 | 1997 | M2 |
| 12 | 6 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) | |||
| 13 | 6.01 | Below Ground Level | BI01010001010000000000000515BI0100001208 | 75.9003 | M3 |
| 14 | 6.02 | Above Ground Level | BI01010001010000000000000515BI0100001210 | 431.056 | M3 |
| 15 | 7 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. | BI01010001010000000000000515BI0100001211 | 78632.4 | KG |
| 16 | 8 | Brick work in CM 1:5 (one cement & five sand) using Third Class Country Brick Kiln Burnt of size 8"X41/4"X 2 3/4" including finishing, curing, etc., complete complying with standard specification | |||
| 17 | 8.01 | Below Ground Level | BI01010001010000000000000515BI0100001212 | 74.9966 | M3 |
| 18 | 8.02 | Above Ground Level | BI01010001010000000000000515BI0100001213 | 219.995 | M3 |
| 19 | 9 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. | BI01010001010000000000000515BI0100001214 | 6510 | KG |
| 20 | 10 | Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification | BI01010001010000000000000515BI0100001215 | 50.0047 | M3 |
| 21 | 11 | Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock to required size as directed by the departmentalofficers of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. | |||
| 22 | 11.01 | 63mm thick | BI01010001010000000000000515BI0100001216 | 1500 | M2 |
| 23 | 12 | Manufacturing, Supplying and Fixing of Stainless Steel Hand RM rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with\ntubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick ·welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete | BI01010001010000000000000515BI0100001217 | 300.004 | Rm |
| 24 | 13 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/lmm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanismnbetween sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work | BI01010001010000000000000515BI0100001218 | 26.72 | M2 |
| 25 | 14 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) sqm. Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x\n102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, .handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and\nwelded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. | BI01010001010000000000000515BI0100001219 | 30 | M2 |
| 26 | 15 | Supplying and fixing rolling shutter shall be push and pull type (manually operated) 18 grade 3" lathe section which consist of five main parts such as curtain lock plate guide channels rollers and hood cover.These five parts are made out of special components deailed below:curtain shall be 18G/3" lath sections cut to required size and filled with heavy cast irons/MS clips.to required size and filled with heavy cast iron/MS clips.For 8'0" (2.45m) high rolling shutter lathe sections provided shall be not less than 37 numbers.Lock plate shall be 10G shall be less than 37 numbers.Lock plate shall be 10G MS sheet and attached to the side brackets with 20mm square bar.Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets .Roller shall be heavy cast iron pullies fitted with heavy duty "C" class 40mm steel pipe and high tensile high carbon coil springs.2 spring shall be supplied.Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets.Hood cover shall be of 0.8mm CRCA sheet reinforced withn 25mmx25mmx3mm MS angle or gate channel.The rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heavy coat of red oxide primer etc., complete\n | BI01010001010000000000000515BI0100001220 | 18.6 | M2 |
| 27 | 16 | Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work | BI01010001010000000000000515BI0100001221 | 500.001 | M2 |
| 28 | 17 | Plastering with cement mortar (1:4) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications | BI01010001010000000000000515BI0100001222 | 30.0044 | M2 |
| 29 | 18 | Dadooing the walls with vitirfied tiles of size 600mm X600mm X 8mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. | BI01010001010000000000000515BI0100001223 | 134.998 | M2 |
| 30 | 19 | Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications | BI01010001010000000000000515BI0100001224 | 1065 | M2 |
| 31 | 20 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications | BI01010001010000000000000515BI0100001225 | 148.686 | M2 |
| 32 | 21 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. | BI01010001010000000000000515BI0100001226 | 160.002 | M2 |
| 33 | 22 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. | BI01010001010000000000000515BI0100001227 | 210 | M2 |
| 34 | 23 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete | BI01010001010000000000000515BI0100001228 | 10 | M3 |
| 35 | 24 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete | BI01010001010000000000000515BI0100001229 | 105 | M2 |
| 36 | 25 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light /Exhaust fan / Fan Point (For electronic regulator) (5 Points Per Coil) | BI01010001010000000000000515BI0100001230 | 60 | Nos |
| 37 | 26 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter lockingWall socket with 5A Flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. | BI01010001010000000000000515BI0100001231 | 30 | Nos |
| 38 | 27 | Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking Wall socket with 15A Flush type switch with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed power plug point | BI01010001010000000000000515BI0100001232 | 10 | Nos |
| 39 | 28 | Supply and fixing of Single box type 4"40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed leads from terminals to the fitting | BI01010001010000000000000515BI0100001233 | 25 | Nos |
| 40 | 29 | Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp. | BI01010001010000000000000515BI0100001234 | 10 | Nos |
| 41 | 30 | Supply and fixing of bulk head fitting with guard (Philips/Bajaj/Crompton/K.Lite) suitable for 11W CFL lamp CFL. | BI01010001010000000000000515BI0100001235 | 20 | Nos |
| 42 | 31 | Supply and fixing of 4' 40 w Twin street light flu.fitting complete with copper choke and condensor with 32mm dia GI Pipe (Class 'b') with 1 No 32mm GI Bend complete on the existing post wall with 16A aerial fuse unit on MS Plate with PVC unsheathed Copper leads MS Clamps and aluminium Painting with flu.tubes | BI01010001010000000000000515BI0100001236 | 8 | Nos |
| 43 | 31.01 | Borewell | |||
| 44 | 32 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the PWD Board Officers) including construction of mud pit | |||
| 45 | 32.01 | a) Upto 60 mts. Depth ending below ground level. | BI01010001010000000000000515BI0100001237 | 60 | RM |
| 46 | 32.02 | b) From 60 mts to 90m | BI01010001010000000000000515BI0100001238 | 30 | RM |
| 47 | 32.03 | b) From 90 mts to 120m | BI01010001010000000000000515BI0100001239 | 30 | RM |
| 48 | 33 | Reaming from 200mm dia pilot bore to 350m dia bore as directed by the department officer upto 110m depth ending below ground level. | |||
| 49 | 33.01 | a) Upto 60 mts. Depth ending below ground level. | BI01010001010000000000000515BI0100001240 | 60 | RM |
| 50 | 33.02 | b) From 60 mts to 90m | BI01010001010000000000000515BI0100001241 | 30 | RM |
| 51 | 33.03 | b) From 90 mts to 120m | BI01010001010000000000000515BI0100001242 | 30 | RM |
| 52 | 34 | Supplying and delivery of 200mm dia following OD PVC blue casing pipe suitable for medium wells with standard approved quality and make etc., complete as per the instructions of the departmental authorities. | |||
| 53 | 34.01 | a) Slotted PVC Pipe | BI01010001010000000000000515BI0100001243 | 55 | RM |
| 54 | 34.02 | B) Unslotted PVC pipe | BI01010001010000000000000515BI0100001244 | 65 | RM |
| 55 | 35 | Labour charges for inserting PVC casing pipe (with slots and without slots) in the drilled hole including jointing the pipe with cement paste etc., complete and supplying and packing of annular space with pebbles etc., complete as per standard specification. | BI01010001010000000000000515BI0100001245 | 120 | RM |
| 56 | 36 | Charges for developing the borewells with air compressor of 600 CFM capacity including transportation labour and fuel charges for compressor as directed by the departmental officers and conducting yield test by "V" notch method etc., complete as per standard specification. | BI01010001010000000000000515BI0100001246 | 8 | Hrs. |
| 57 | 37 | Supply and delivery of wet type submersible pumpset as per IS 8034/1989 and IS 9283/1995 suitable to pump 1000 LPM / 80M head with dry run preventor etc., complete as per standard specifications. (15 HP) | BI01010001010000000000000515BI0100001247 | 1 | Nos |
| 58 | 38 | Supply and fixing of 3 Phase panel board with star delta with two level guard and auto start etc., complete as per standard specifications (15 HP) including timer facility | BI01010001010000000000000515BI0100001248 | 1 | Nos |
| 59 | 39 | Supply and delivery of 6 Sq.mm. PVC insulated and sheathed 3 core flat type copper cable comfirming to IS 694/1990 etc., complete as per standard specifications. | BI01010001010000000000000515BI0100001249 | 170 | RM |
| 60 | 40 | Supply and delivery of 100 AMPS TPN Sheet steel doubler break switch with HRC Fuse and neutral on suitable angle frame work MS cable entry boxes with PWD earthing. | BI01010001010000000000000515BI0100001250 | 1 | Nos |
| 61 | 41 | Supply and delivery of power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS 2834 with ISI marking etc., complete as per standard specifications. | BI01010001010000000000000515BI0100001251 | 6 | KVAR |
| 62 | 42 | Supply and fixing of 80mm UPVC Pipe etc., complete as per standard specifications. | BI01010001010000000000000515BI0100001252 | 80 | RM |
| 63 | 43 | Supply and delivery of following specials as per standard specifications. | |||
| 64 | 43.01 | 90 MM dia PVC 6kg/cm2 | BI01010001010000000000000515BI0100001253 | 300 | RM |
| 65 | 43.02 | a) 80MM Reflex valve As per I.S. 5312 / Part I / 84 with Bye pass arrangements(PN-1) With IS Marking . | BI01010001010000000000000515BI0100001254 | 1 | Nos |
| 66 | 43.03 | b)80mm GI Bend | BI01010001010000000000000515BI0100001255 | 4 | Nos |
| 67 | 43.04 | c)80mm GI Flange set | BI01010001010000000000000515BI0100001256 | 2 | Nos |
| 68 | 43.05 | f)Clamp set 80MM dia | BI01010001010000000000000515BI0100001257 | 4 | Nos |
| 69 | 43.06 | g)200mm dia bore cover plate | BI01010001010000000000000515BI0100001258 | 1 | Nos |
| 70 | 43.07 | h)20mm dia GI Pipe service pipe | BI01010001010000000000000515BI0100001259 | 6 | RM |
| 71 | 43.08 | i)20mm dia GI Bend | BI01010001010000000000000515BI0100001260 | 2 | Nos |
| 72 | 43.09 | j)80mm dia GI coupling | BI01010001010000000000000515BI0100001261 | 5 | Nos |
| 73 | 43.1 | k)20mm dia GI Coupling | BI01010001010000000000000515BI0100001262 | 1 | Nos |
| 74 | 43.11 | l)20mm dia GI Elbow | BI01010001010000000000000515BI0100001263 | 1 | Nos |
| 75 | 43.12 | m)20mm dia GI Pipe Hex Nipple | BI01010001010000000000000515BI0100001264 | 1 | Nos |
| 76 | 43.13 | n)100mm CI D/F Sluice valve LAP / Wheel as per IS 14846/2000 PNI with IS marking | BI01010001010000000000000515BI0100001265 | 1 | Nos |
| 77 | 43.14 | o)Nylon Rope | BI01010001010000000000000515BI0100001266 | 85 | Nos |
| 78 | 44 | Earthwork excavation for pipe line in all type of soil and sub soils etc., complete as per standard specifications.Other than loose soil | BI01010001010000000000000515BI0100001267 | 300 | RM |
| 79 | 45 | Refilling the excavated earth into the trench etc., complete as per standard specifications. | BI01010001010000000000000515BI0100001268 | 300 | RM |
| 80 | 46 | Labour charges for the erection of submersible pumpset in borewell/ open well including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter , three pilot ( indicating ) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days . (Above 10.00 HP to 20.00 HP ) | BI01010001010000000000000515BI0100001269 | 1 | Nos |
| 81 | 47 | Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank. | BI01010001010000000000000515BI0100001270 | 2 | Nos |
| 82 | 47.01 | Machinaries | |||
| 83 | 48 | Brick lining for 300 mm thick in furnace roof side walls and bottom ,front and back door will be in fibre LI 2800 L x 900 W x 700H in mm chamber size door operation: up & down movement manual operated max operating Temp :700-900 dec c. | BI01010001010000000000000515BI0100001271 | 2 | Nos |
| 84 | 49 | LPG burner set with LPG Bank & Control Panel supply of 4 nos 5 burner with blower and fully auto control system like 10,000 Kcal capacity LPG fire ignition, flame sensor and aoto cut off incorporated in a separate sequence controller equalent to imported control system for Air and LPG with Auto igniting system & supply of 20+20 cylinter bank with pipe line from LPG cylinder bank up to each buener end by using TATA ''c'' class grade material pipe with required materials. | BI01010001010000000000000515BI0100001272 | 2 | Nos |
| 85 | 50 | 3Hp motor 2 Nos for use to id fan & 1Hp motor use for wet Scrubber. Wet Scrubber for gas cleaning system.The system should be enhanced with stainless steel cylinder and SS ID fan (3Hp motor x 2 Nos with ISI Standard) to avoid rusting ,volume of water should be increased for effective scrubbing. | BI01010001010000000000000515BI0100001273 | 2 | Nos |
| 86 | 51 | GUY Supported Chimney: This is a cylindrical this is a cylindrical type MS IS -2062 quality, 8 mm plate chimney with two coated of Aluminium heat resistance paint externally 7000 mm,long bottom cylindrical chimney it is rested on 16 mm type MS -2062 quality 100 feet thick base flange and stool flange 16 mm thick with 12 mm gusset support .Cylindrical chimney mounted on foundation 12 Nos x 25 mm dia bolt,nut joints, top 1 cylintrical shell boiler quality 8 mm plate x 7000 mm long base chimney it is rested 50 mm width base flange, top2 cylindrical shell boiler quality 6 mm plate x 7000 mm long base chimney it is rested 50 mm width base flange & wind force curtain MS flat set,with lightening arrestor 25 mm x 3 mm copper flat earthing ,with easy hings type manual opened manhole door,necessary for pollution control board monitoring, sample ports arrangement ladder assembly with safety guard set 70 feet full height one set of Detachable plateform,over all size: 800 mm dia x 400 mm dia x 21000 mm length. | BI01010001010000000000000515BI0100001274 | 1 | Nos |
| 87 | 52 | Erection and commissioning charges for the furnance , burner,wet scrubber & chimney includind labour and materials charges etc complete. | BI01010001010000000000000515BI0100001275 | 1 | Nos |
| 88 | 53 | Providing veult shaped tensile fabric structure with 17m wide an 11M length with suitable center height with fabric fixing and MS fabricated structure for gallery and support coloumn required to hold mild steel section manufactured using high steel section manufactured using high steel section using high quality pure steel HR Coils and the tubes to conform IS 4923, IS 1239 and IS 1161. | BI01010001010000000000000515BI0100001276 | 40 | M2 |
| 89 | 54 | Lawn Making Grass with best quality of lawn grass supply including the cost of transport and free maintanance of the lawn for 90days or more till grass forms a thick lawn form weeds,pest and diseasesand fit for movingetc., A)Mexican Gradd B)Korean Grass | BI01010001010000000000000515BI0100001277 | 1700 | M2 |
| 90 | 55 | Supply of plants &planting works: Supply and planting of best qualityof healthy plantslisted followingas watering wil be done minimum 30days including maintenance,sprayingwith PGR's and pesticide complete in all respect | |||
| 91 | 55.01 | Ornamendal shru 65 cycus 13 20 leaves GCC pd-171 | BI01010001010000000000000515BI0100001278 | 150 | Nos |
| 92 | 55.02 | Ornamendal Shrubs ficus ponda height 3' gcc pd -210 | BI01010001010000000000000515BI0100001279 | 400 | Nos |
| 93 | 55.03 | Ornamendal shrubs, Aglonema height 3' GCC PD-204 | BI01010001010000000000000515BI0100001280 | 2500 | Nos |
| 94 | 55.04 | Ornamendal shrubs Table Palm height 5'\nGCC PD 177 | BI01010001010000000000000515BI0100001281 | 50 | Nos |
| 95 | 56 | Sprinkler Arrangements : Supply and fixing of pop-up sprinkler arrangements works including the cost of all labour and materials,etc., complete as per standard specifications | BI01010001010000000000000515BI0100001282 | 15 | Nos |
| 96 | 57 | Supply and fixing of Garden Bench of SS Benches of size 1.20mx0.45m each for leg and rest. The seat using 100mm x 25mm SS rectangular section of 14SWG and the leg using complete., | BI01010001010000000000000515BI0100001283 | 10 | Nos |
| 97 | 58 | Installation of post top light fixtures supplying and fixing of 3mtr MS Tubler pole and 2.5 Sqr mm 3 core copper UG cable and one number of LED 36W street light including pole fixing concrete part the instruction given by the departmental officer. | BI01010001010000000000000515BI0100001284 | 20 | Nos |
| 98 | 59 | Supplying and erecting in position of 1000 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.\n(a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set\n(c) Feed Pump 0.50 HP - 1 No. (d) Vertical Pump 2-9, 2.00 HP/ Single Phase - 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20" Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings .. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. | BI01010001010000000000000515BI0100001285 | 1 | Nos |
| 99 | 60 | Supply and fixing of CCTV Camera with 5units with following specifications as instructed by the departmental officers,cost including all cost and conveyance of all materials to site,labour charges and other incidental charges etc.,complete A)1.3MP HD Bullet camera sensor 3.6mm 1080lens 36 IR high sensitive LED , 25M Distance IR with heat absorbing filter & day/night sensor. B) 1080P-8 Channel HD DVR 8 Channel video , 4 channel audio 1 VGA output,1 HDMI output, USB Mouse and remote /mobile view and maximum 4TB HDD Connectivity with 1 SATA port. C) 4TB WD SATA purple surveilance hard disk. D) 8Channel SMPS. E) NC & DC Connector. F) LG Monitor 22inches. G)Service Charges. H) 8 U mounted rack with glass door with two year warranty for camera,DVT,Hard Disc Monitor. | BI01010001010000000000000515BI0100001286 | 6 | Nos |
| 100 | 61 | Providing and Laying Wet Mix Macadam 150mm Thick consist of clean crushed aggregate to clean crushed aggregate to mechanically interlocked by rolling and bonding together with spreading binding matreials and finshied in accordence with requirements of specification and thickness as per approved plans or as per approved plans or as directed by the Enginner as per clause Morth 111,112,406 & 90. | BI01010001010000000000000515BI0100001287 | 330 | M3 |
| 101 | 62 | Providing and laying Prime Coat over WBM/WMM surface using 7Kg of Emulsion Bitumen (SS1) per 10sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 502 of MORTH Rev-5 | BI01010001010000000000000515BI0100001288 | 2200 | M2 |
| 102 | 63 | Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications | BI01010001010000000000000515BI0100001289 | 2200 | M2 |
| 103 | 64 | Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20 kgs of VG30 bitumen for premixing per 10 sqm including cost and conveyance of all materilas to CMP site , heating the bitumen and agregates to the required temperature and mixing them in required temparature in central hot mix plant 20-30 ton capacity , conveying the mix by tipper trucks to work site , spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sectons and compacted ty Vibratory / Pneumatic roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 CMP with bitumen boiler tipper trucks , Paver finisher , Vibratory / pneumatic rollers and all other tools and plant required , including fuel and all other tools and plant required , including fuel and other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5. | BI01010001010000000000000515BI0100001290 | 110 | M3 |
| 104 | 65 | Providing and laying Bituminous Concrete to 30 mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix ty tipper trucks to paver site , spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne vibratory / Pneumatic roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 CMP with bitumen boiler, tipper trucks , Pavar finisher , Vibratory / Pneumatic roller and all other tools and plant required , including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5. | BI01010001010000000000000515BI0100001291 | 66 | M3 |
| 105 | 66 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms. Per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level, uniform and free from streaks and holes etc., complete (as per MORT & H specification No. 803 ) | BI01010001010000000000000515BI0100001292 | 120 | M2 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
