New Okhla Industrial Development Authority-NOIDA has published Providing Path Lighting Arrangement And 16 Mtr High Mast In The Park Sector-77 ( Near Sub-Station Sector-79 ) , Noida. Submission Date for this Tender is 28-10-2020. Electrification Work Tenders in Noida Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work :- | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply and fixing of 6 mtr G.I. octagonal pole of approved make ( top dia 70 mm, bottom dia 130 mm and base plate 12 mm thick) having 3 mm thickness with single arm bracket ( 1 mtr length) on RCC foundation including the cost of foundation , foundation bolt, excavation & back filling required T & P complete in all respects (PS No. 647) (Make - G.E./Philips/Bajaj) | 51 | Nos. | |
| 2 | 2 | Fixing of LED Street Light fitting having die cast Aluminium body and difuser with driver set suitable for 52 to 72 watt. Confirming to IP-66 and above protection. Complete in all respects. (PS No. 1422) Cat-AA | 51 | Nos. | |
| 3 | 3 | Supply of Steel Tubular Pole 11 M long designated 410-SP-56 . complete in all respects as per direction of E/I. .(UPERC P-30) | 2 | Nos. | |
| 4 | 4 | Errection of metallic pole of following length in cement concrete 1:3:6 ( 1cement:3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required above 10.0 mtr and upto 12 mtr (DSR 2018 I. n. 11.3.4) | 2 | Nos. | |
| 5 | 5 | Supply and erection of overhead line with ACSR Conductor (Dog & Raccoon) poles / service bracket including binding etc. complete in all respects. P.S. No. 627 | 10 | Kgs. | |
| 6 | 6 | Painting of the electric pole with 2 Coats of aluminium paint over red oxide primer complete in all respects. P.S. No. 634 | 2 | Nos. | |
| 7 | 7 | Supplying of channel iron 75mmx40mmx6mm(7.14 Kg Per mtr) pole top bracket/cross arm for single 11 kV overhead line conductor complete with 50mmx6mm flat iron clamp, bolts, nuts and washer including drilling holes for insulator pins bolts and nuts etc, and painting with primer and finish paint as required (DSR-2018 item no. 13.2 pg.44) | 1 | Nos. | |
| 8 | 8 | S/E of straight MS Channel 50x100 mm. (9.2 Kg/M) 2.60 M long as per design with required clamps made of M.S. flat of size 50x6 mm. with nut & bolts etc. as per direction of E/I. .((UPERC P-30) | 7 | Nos. | |
| 9 | 9 | Supplying and erection of 11kV pin insulator complete with large steel head G.I. Pin, nuts & washer etc. as required (DSR-2018 item no. 13.10 pg.46) | 6 | Nos. | |
| 10 | 10 | Supplying and erection of 11kV Disc insulator for 11kV overhead line with galvanised inculator fitting, ball and socket type and complete with galvanised strain clamp, bolts, nuts & washer etc. as required (DSR-2018 item no. 13.11 pg.45) | 6 | Nos. | |
| 11 | 11 | S/F of 11 KV TPMO Relco/Rama/Azad make 9 Nos. insulator of Jai shree/BHEL/ Rama/ Rastriya make complete in all respects as per direction of E/I.(UPERC page no. 58) | 1 | Nos. | |
| 12 | 12 | S/E Testing & Commissioning of 63 KVA Al. wound outdoor type Transformer as per ISS. Complete in all respects Make : AZAD/P.M./Kanohar/LD Power/Paramix as per direction of E/I..(RESPO page no. 51) | 1 | Nos. | |
| 13 | 13 | Supply and Fixing of 16 Mtr High Mast pole of approved make with rising system, Hot dip galvanised inside & outside, having pole sheet thickness 3mm, top dia minimum 150 mm bottom dia miimum 360 mm base plate 32 m thick, suitable for wind velicity as per IS 875 part 3 & having no circumferential weld with accessories for High Mast such as heat frame suitable for 6 luminaries & its control gear boxes, 1.5 HP power tool motor, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufacturer drawing & site requirement along with foundation bolts, nuts, washer, Anchor plate etc. Complete in all respects as per direction and satisfaction to the Engineer-in-charge (PS No. 652) (Make - G.E./Philips/Bajaj) | 1 | Nos. | |
| 14 | 14 | Fixing of Factory wired integral LED Flood Light Luminaires with die cast Aluminium housing build with driver set suitable for 140 to 150 watt. Confirming to IP66 and above protection. Complete in all respects. (PS No. 1454) CAT-AA | 6 | Nos. | |
| 15 | 15 | Numbering of Pole with combination of yellow and black colour paint etc. complte in all respects as per direction of E/I. (AOR) | 80 | Nos. | |
| 16 | 16 | Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (Kalinga, Grandlay, Skytone, Havell's make) | |||
| 17 | 16.1 | 1) 16 Sq.mm. x 2 Core | 1305 | Mtr. | |
| 18 | 16.2 | 2) 16 Sq.mm. x 4 Core | 220 | Mtr. | |
| 19 | 16.3 | 3) 35 Sq.mm. 2 Core | 530 | Mtr | |
| 20 | 16.4 | 4) 70 Sq.mm. 3.5 Core | 230 | Mtr | |
| 21 | 17 | S/F of cable Lug(socket) to the cable lead. Complete in all respects as per PS No. 504 | |||
| 22 | 17.1 | 1- 16 Sq.mm. | 204 | Nos | |
| 23 | 17.2 | 2- 35 Sq.mm. | 6 | Nos | |
| 24 | 17.3 | 3- 70 Sq.mm. | 3 | Nos | |
| 25 | 18 | S/Laying of 90 mm dia (OD 90 mm & ID 76 mm nominal) size of (DWC) HDPE Pipes ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II complete with filling and cutting, jointing etc. direct in ground ( 75 cm below ground level) including excavation and refilling the trench pat excluding sand cushioning and protective covering etc. Complete in all respects. Rex/Duraline/ Time/CPE make. as per DSR 2018 item no. 14.16.2 page no. 52 | 1660 | Mtr. | |
| 26 | 19 | Supply and fixing of 40 Amp TPN capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint crossing of time switch TSO 100 series with contractors, HRC fuse, isolating swtich metering instrument & instrument box with CTs etc. in case of TPN, Complete in all respects. as per PS No. 807D | 1 | Nos. | |
| 27 | 20 | Supply and fixing of 15 Amp TPN capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint crossing of time switch TSO 100 series with contractors, HRC fuse, isolating swtich metering instrument & instrument box with CTs etc. in case of TPN, Complete in all respects. as per PS No. 807D | 1 | Nos. | |
| 28 | 21 | Supply and burying of 600 mm x 600 mm x 6.0 mm GI plate, vertically for eathing with its top at least 3 meters below ground level complete with 20 mm dia. GI Pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15 mm. dia. GI Pipe up to switch board 30 cm. square CI Frame with hinged cover, masonry housing, alternate layers of charcoal/coke and salt at least 150 mm. thick alround etc. as per direction of Engineer-in-charge complete in all respects . PS No. 702 | 10 | Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
