State Fisheries Development Corporation Limited has published Construction Of Godown At Senerbundh Fisheries Project , Rampurhat , District Birbhum .. Submission Date for this Tender is 28-10-2020. Godown Tenders in KOLKATA West Bengal. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of Godown at Senerbundh Fisheries Project, Rampurhat, District Birbhum. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | ( a ) Depth of excavation not exceeding 1.5 m | BI01010001010000000000000515BI0100001113 | 82 | Cum. |
| 3 | 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. | BI01010001010000000000000515BI0100001114 | ||
| 4 | 2.01 | (a) With earth obtained from excavation of foundation. | BI01010001010000000000000515BI0100001115 | 40 | Cum. |
| 5 | 3 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. | BI01010001010000000000000515BI0100001116 | 27 | Cum. |
| 6 | 4 | Supplying and laying Polythene Sheet (150gm / Sq.M) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. | BI01010001010000000000000515BI0100001117 | 85 | Sq.M |
| 7 | 5 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. | BI01010001010000000000000515BI0100001118 | 85 | Sq.M |
| 8 | 6 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.\nPakur Variety | BI01010001010000000000000515BI0100001119 | 7 | Cum. |
| 9 | 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.\nM-20 Grade\nPakur Variety | BI01010001010000000000000515BI0100001120 | 26 | RM |
| 10 | 8 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.\n(a) For works in foundation, basement and upto roof of ground floor/upto 4 m.\n(i) Tor steel/Mild Steel | BI01010001010000000000000515BI0100001121 | 2.5 | MT |
| 11 | 9 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). | BI01010001010000000000000515BI0100001122 | ||
| 12 | 9.01 | (a) 25 mm to 30 mm thick shuttering without stagging | BI01010001010000000000000515BI0100001123 | 25 | Sq.M |
| 13 | 9.02 | (b) Steel or 9 to 12mm thick approved quality ply board shuttering in any concrete work. | BI01010001010000000000000515BI0100001124 | 175 | Sq.M |
| 14 | 10 | Brick work with 1st class bricks in cement mortar (1:4) | BI01010001010000000000000515BI0100001125 | ||
| 15 | 10.1 | (a) In foundation and plinth | BI01010001010000000000000515BI0100001126 | 6.5 | Cum. |
| 16 | 10.2 | (b) In superstructure | BI01010001010000000000000515BI0100001127 | 20 | Cum. |
| 17 | 11 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. | 18 | Sq.M | |
| 18 | 12 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] | |||
| 19 | 12.01 | (i) With 1:6 cement mortar 25 mm thick plaster | 145 | Sq.M | |
| 20 | 12.02 | (ii) With 1:4 cement mortar 15 mm thick plaster (external) | 140 | Sq.M | |
| 21 | 12.03 | iii) With 1:3 Cement Morter, 10mm thick plaster | 85 | Sq.M | |
| 22 | 13 | Labour for Chipping of concrete surface before taking up Plastering work. | 135 | Sq.M | |
| 23 | 14 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. | 75 | Sq.M | |
| 24 | 15 | 25 mm. thick Damp Proof Course with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG 40] using 1.7 kg. per Sq.M including heating the bitumen and cost and carriage of all materials complete. | 8 | Sq.M | |
| 25 | 16 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps.\nNeem, Jam, Jackfruits | 0.06 | Cum. | |
| 26 | 17 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.\n(a) 35 mm thick shutters (single leaf) | 2.5 | Sq.M | |
| 27 | 18 | Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape\nand size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture,\nadhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame\nwhere necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. and including the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. | 12 | Sq.M | |
| 28 | 19 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.\nGrill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. | 2 | Qntl | |
| 29 | 20 | Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side\nguide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete. | 5 | Sq.M | |
| 30 | 21 | Cement washing including cleaning and smoothening surface thoroughly (cement to be used @15 kg./100 sq.m. of surface for one coat and @25 kg./100 sq.m of surface for two coats):\nTwo coats (on new works only). | 300 | Sq.M | |
| 31 | 22 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.\nTwo coats. | 300 | Sq.M | |
| 32 | 23 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | 22 | Sq.M | |
| 33 | 24 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :\nOn steel or other metal surface :\nTwo coats (with any shade except white) | 22 | Sq.M | |
| 34 | 25 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)\n40mm X 6mm, 200mm Length | 6 | Nos. | |
| 35 | 26 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:\n125 x 63 x 3.2mm. | 9 | Nos. | |
| 36 | 27 | Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of\nEngineer-in-Charge\n150mm long x 10mm dia. bolt. | 6 | Nos. | |
| 37 | 28 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).\nUsing grey cement. 35 mm. thick | 41 | Sq.M | |
| 38 | 29 | Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member\nall complete as per direction of Engineer-in-Charge. | 9.5 | RM. | |
| 39 | 30 | Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc profile . The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted profile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±) 1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm / welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30 mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers\nspecifications and direction of Engineer-in-Charge. | 2.9 | Sq.M | |
| 40 | 31 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including\nroughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. | |||
| 41 | 31.01 | A) Floor\nWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.\n(a) Area of each tile upto 0.09 Sq.m | 4.5 | Sq.M | |
| 42 | 31.02 | (B) Wall\nWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.\n(a) Area of each tile upto 0.09 Sq.m | 22 | Sq.M | |
| 43 | 32 | For Electrical and plumbing work | 1 | LS | |
| 44 | 33 | Add GST @ 12% on Rs. 8,83,953.96 i.e. total amount over item no. 1 to 32 | 883954 | % | |
| 45 | 34 | Add Labour Welfare Cess @ 1% of Rs. 9,90,026.33 i.e. total amount Item No. 1 to 33 | 990026 | % |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
