Town Panchayats-TP has published Iudm 2019-20 - Valappadi Town Panchayat , Salem District . Improvement Of Existing Bus Stand With Daily Market In S . F . No . 38/7B. Submission Date for this Tender is 10-11-2020. Bus Stand Tenders in Valappadi Town Panchayat Tamil Nadu. Bidders can get complete Tender details and download the document.
| NAME OF WORK:- IMPROVEMENT OF EXISTING BUS STAND WITH DAILY MARKET IN S.F NO 38/7B IN VALAPPADI TOWN PANCHAYAT | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Clearing the Light jungle in working spot as directed by the Departmental officers. SSR PAGE NO 24,SI NO :2 | 20 | m2 | |
| 2 | 2 | Earth Work excavation for foundation in soils and sub soils full depth as may be directed except in rock requiring blasting but inclusive of shoring and strutting and balling out water wherever necessary refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well rammed and consolidated and depositing the surplus earth within the compound with an initial lead of 10m and lift of 2m in places shown by the departmental officers etc., complete complying with standard specification | |||
| 3 | 2.01 | For Buildiing | 2460.9 | M3 | |
| 4 | 3 | Earth work excavation for foundation in MR-&-DMR (Not Requiring Blasting) Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in medium rock and dense medium rock not requiring blasting as per SI 72, Sl No.64 and depositing the excavated earth with in the compound in places shown by the departmental officers etc., complete PAGE NO:1 | 690 | M3 | |
| 5 | 4 | Supplying and filling in foundation, basement, etc with filling Stone Dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. | 104 | M3 | |
| 6 | 5 | Supplying and filling in basement, with filling Well Gravel in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. | 191 | M3 | |
| 7 | 6 | Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification. | 102 | M3 | |
| 8 | 7 | Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 150mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH | 366 | M3 | |
| 9 | 8 | Construction of dry lean Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification. | 366 | M3 | |
| 10 | 9 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) | |||
| 11 | 9.01 | footing coloumn/ | 1805 | M2 | |
| 12 | 9.02 | Lift wall | 107 | M2 | |
| 13 | 9.03 | coloumn | 1905 | M2 | |
| 14 | 9.04 | Kerb Wall Sides | 248 | M2 | |
| 15 | 9.05 | roof slap. | 4626 | M2 | |
| 16 | 10 | Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.(Using Vibrator) TNDSS NO: 30 V, VI (S3), VII-3. | |||
| 17 | 10.01 | In foundation and basement | 695 | M3 | |
| 18 | 10.02 | roof slap. | 1200 | M3 | |
| 19 | 11 | Providing and laying in position Standardised Concrete Mix M-40 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 440 Kg/ cum and maximum water cement ratio of 0.40 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor wherever necessary without claiming extra cost etc., complete complying with standard specifications and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) | |||
| 20 | 11.01 | Road Work | 543 | M3 | |
| 21 | 12 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) | |||
| 22 | 12.01 | For Buildiing | 260 | MT | |
| 23 | 13 | Providing and laying Bitmen pad 20mm thick including cleaning surface and providing surface grooves as per directed by the departmental officers etc, complete as per standard specifications. | 105 | M2 | |
| 24 | 14 | Brick work in CM 1:5using fly ash bricks of size 230mm x 110mm x 70mm including finishing,curing,etc., complete complying with standard specification. | |||
| 25 | 14.01 | For Foundation & Basement | 1 | M3 | |
| 26 | 14.02 | For Ground Floor | 329 | M3 | |
| 27 | 14.03 | For First Floor | 219 | M3 | |
| 28 | 15 | Brick partition walls of 11.50cm thickness using Fly ash bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) | |||
| 29 | 15.01 | In First Floor | 316 | M2 | |
| 30 | 16 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. | 4362 | M2 | |
| 31 | 17 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers | 3675 | M2 | |
| 32 | 18 | White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed. | 3675 | M2 | |
| 33 | 19 | Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work). | 4232 | M2 | |
| 34 | 20 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) | |||
| 35 | 20.01 | 40mm thick | 1754 | M2 | |
| 36 | 21 | Paving the floor with Cuddapah stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. | 552 | M2 | |
| 37 | 22 | Paving the flooring with first quality colour design vertified tiles of all colours of size 600mmx600mm in all floors over a base layer of cement morter 1:3 (one cement and three sand) 20mm thick and pointing with the same coloured cement neatly and fixed in position so as to make it perfectly smooth and shining to the alignment etc., complete complying with standard specification and as directed by the departmental officers. (The sample of colour and shade of the vertified tiles should be got approved by the Executive Enginner before use in the works). | 86 | M2 | |
| 38 | 23 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. | 105 | M2 | |
| 39 | 24 | Laying with new C.C. Laminated tiles (Like Dora tiles Eurocon tiles etc),(anti skid) of 20mm thick of approved spl quality and set in Cement Mortar 1:3 (1 of cement and 3 of sand ) 20mm. Thick using river sand and pointing with colour cement using at the rate of 0.40 kg/M2 and mixing with colour pigment at the rate of 0.3 Kg/M2 including finishing complete with Standard Specification and as directed by the Departmental Officers etc., | |||
| 40 | 24.01 | Plain Ceramic Tiles | 275 | M2 | |
| 41 | 25 | Dadooing the walls with best approved quality colour glazed tiles of size 300 x 450 x 6mm set in CM 1:2 (One Cement and two of sand) 10mm thick and pointing with colour cement etc. complete | 810 | M2 | |
| 42 | 26 | Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 80mm thick (table clauses 5 and 9.14) suitable for bus terminals industrial complexes road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 80mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over sand bed of 150mm thick (excluding the cost of sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc., complete ISI 15658-2006. | 536 | M2 | |
| 43 | 27 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. | |||
| 44 | 27.01 | In Ground Floor | 11 | M3 | |
| 45 | 28 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers | 152 | M2 | |
| 46 | 29 | Supply, fabricating & fixing in position of M.S door of size 0..90 x 2.10m. The outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications. | 61 | M2 | |
| 47 | 30 | Fabricating and supplying and erecting the required number of trusses with structural steel members like angle iron MS plates for all truss members including cleats to receive the purlines all cutting drilling holes welding and fixing of members with necessary bolts nuts anchor bolt of approved quality hoisitn aligning and glazing the trusses inposition as per plan. The rate should include the cost painting the members with one coat of red oxide primer and zinc chromate and 2 coats of enamel painting etc., complete complying with standard specification and an directed bya the departmental officers. | 28750 | Kg | |
| 48 | 31 | Supplying and fixing of M.S. grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including cutting the members, welding, grinding, one coat of priming coat using best approved quality red oxide primer, dismantling of walls / concrete if necessary, fixing and finishing the dismantled portion to original condition etc., complete complying with standard specification. | 516 | Kg | |
| 49 | 32 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete | 26 | M2 | |
| 50 | 33 | Supply, fabricating & fixing in position of M.S window outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications. | 26 | M2 | |
| 51 | 34 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete | 81 | M2 | |
| 52 | 35 | Supplying and fixing the Polished Granite 18mm to 20mm thick 4'x2' and above size for urinal partition top and bottom edges shaped to curve including dismantling the existing wall and fixing the including cement slurry etc., complete. | 48 | M2 | |
| 53 | 36 | Supplying & fixing PVC corner beading (size 10.5mm) for toilets as per the instruction of engineer incharge., Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete. | 150 | Rm | |
| 54 | 37 | Supplying and Erecting Pull and Push Type Rolling\nShutter with ISI make of approved size and section\nusing 18 GI sheet. The shutter shall be painted with\none coat of red oxide primer and the rate is inclusive of\nhood covers, transportation charges etc | |||
| 55 | 37.01 | Manually operated (up to 8 m2 area) | 56 | M2 | |
| 56 | 38 | Supplying & Erecting ,Commission at the site 1 ton Machine Room less goods lift10% (1 m/sec) .The Size of Lift Well (2300± 200X1950 ± 200 mm) Lift Car Inside Size (1550± 100x1300± 100x1350± 100 mm )with Stainless steel -Hairline finish for Lift & Car ceiling and floor.The type of the car entrance and Landing entrance production is power operated centre opening sliding door with stainless steel ( hairline finish).The type of Landing door frame is Stainless Steel(hairline finish).The clear opening of door is 900mmX2100mm.The control system are Microprocessor based simplex selective collective control with /without attendent of AC 400/440 VOLTS, 3 PHASE, 50 CYCLES of Elecrical supply with Necessary fiitings,Labour, annual maintanance ,etc to complete. PAGE 143 EL SNO B | 2 | Nos | |
| 57 | 39 | Supplying & Laying of 0.5mm thick Colour coated galvalume sheet at all heights using regular polyster (RMP) paint coated 0.5 mm TCT 550 Mpa profiled galvalume steel (Aluminium Zinc alloy coating 150 gms / sqm total of both sides) sheet including Crimping,flashing, cutting, fabricating erection at all levels, providing openings, touchup painting, all fixtures and fixing accessories such as self drilling fasteners, butyl or acrylic sealants, profiled foam / neoprene fillers etc., including cost of all materials, labour, scaffolding, wastage, tools, tackles, equipments, transportation, preparation of shop drawings etc., all complete as per specification, drawings and as directed. | 1327 | M2 | |
| 58 | 40 | Supplying and fixing corrugated Poly Carbonate sheet of size 3mx1.06m on the roof inbetween the colour coated Galvolume sheets for propre llighting with nessary scrws and EPDM rubber washers, etc., as complete Complying with standard specification and as directed and specified by the departmental officers. | 40 | M2 | |
| 59 | 41 | Supplying & Laying of Galvalume Sheet Eave Gutter of thickness 0.5mm TCT (CCGL-600mm profile grith) with necessary , lappings and all lappings pasted with Sealant and Closures including cost of bolts, nuts, screws, fixing angles,sealing washer and necessary scaffolding, making necessary openings/connections with rain water pipes, all lead, lift etc complete as per standard specifications. | 41 | M2 | |
| 60 | 42 | Supplying and fixing of Gal volume sheet ridge pieces approved quality with necessary U or J bolts and nuts GI washers etc., complete complying with standarad specification. | 67 | Rmt | |
| 61 | 43 | Dismantling, clearing away and carefully Brick / stone masonry in Cement mortar walls under 3m high stack materials useful for re-use for any thickness of walls etc. complete complying with standard specification and as directed by the Departmental officers. | 257 | M3 | |
| 62 | 44 | Dismantling, clearing away and carefully Terracing work in roof or floor stacking materials useful for re-use for any thickness etc. complete complying with standard specification and as directed by the Departmental officers. | 731 | M2 | |
| 63 | 45 | Dismantling, clearing away and carefully Cut Stone Slabs / RCC Cover Slabs stacking materials useful for re-use for any thickness etc. complete complying with standard specification and as directed by the Departmental officers. | 159 | M2 | |
| 64 | 46 | Dismantling the damaged Doors and windows including removal of frames, Hinges, fastenings and fixing the same including necessary alterations etc., complete complying with standard specification and as directed by the Departmental officers. | 109 | M2 | |
| 65 | 47 | Dismantling, clearing away and carefully Plain cement concrete stacking materials useful for re-use for any thickness etc. complete complying with standard specification and as directed by the Departmental officers. | 118 | M3 | |
| 66 | 48 | Dismantling clearing away and carefully stacking of AC sheet roof without roof timbers etc useful for reuse. | 448 | M2 | |
| 67 | 49 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | 10300 | Kg | |
| 68 | 50 | Earth work excavation and deposting on bank with initial lead of 10m & initial lift of 2m in sand , silt or other loose soil wet sand or silt not under water light back cooton soil sandy loam and oridinary soil inclinding ecxcavated earth (SS20A) | 270 | M2 | |
| 69 | 51 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC ccessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) SD NO 23\n | 470 | No | |
| 70 | 52 | Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point SD NO 36\n | 22 | No | |
| 71 | 53 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point SD NO 37\n | 30 | No | |
| 72 | 54 | Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point SD NO 40\n | 20 | No | |
| 73 | 55 | Supply and fixing of 4' 20W LED Fitting with LED (Philips/Havells)Tubelight with double side connection on wall or ceiling with PVC unsheather copper leads from terminals to the filling (SOR Page No-114 Item No 15 b ) | 250 | No | |
| 74 | 56 | Supply and fixing of 120W LED Outdoor street light fitting (Philips/Havells) complete with T.W round blocks on wall or ceiling with flu tube with PVC unsheather copper leads from terminals to the filling (SOR Page No-114 Item No 17D ) | 50 | No | |
| 75 | 57 | Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1metre down rod with fan clamp with side plates and cross arm of size 450 mm (18") (SD 106) | 70 | No | |
| 76 | 58 | Supply and fixing of 375 mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall(SD 116) | 20 | No | |
| 77 | 59 | Supply and fixing of 8 ways 3 phase DB No. of ways incomer MCB / Isolator - 4 No. of ways incomer ELCB / RCD - 4 No. of sub-incomers - 12 No. of outgoings ways - 24 Make-Legrand) (SOR Page No-137 Item No 16 C ) | 3 | No | |
| 78 | 60 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1"x1/8"copperflat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD 125) | 18 | No | |
| 79 | 61 | Supply and fixng of TNEB meter board suitable for 3phase 100A service connection made up of suitable angle iron frame work of size 2feet x 1-1/2 feetusingangleironofsize1-1/2"x1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts support sand supply and fixing of 3Nos.100A fuse units (500V),1No.neutral link,copper earth flat of size1"x1/4"with interconnection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete(SD 130) | 2 | No | |
| 80 | 62 | Supply and fixng of TNEB Meter Board suitable for 3 Phases 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 200A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse.units by 19/16 PVC insulated copper wire with earth connection complete. (SD 131) | 5 | No | |
| 81 | 63 | Supply and fixing of 100A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with MS cable entry boxes and with PWD earthing (SD 168) | 5 | No | |
| 82 | 64 | Supply and fixing of 200 Amps TPN sheet steel double break switch with HRC fuses and neutral on suitable angle iron frame work with MS cable entry boxes PWD Earthing. (SD 170) | 5 | No | |
| 83 | 65 | Supply and clamping of 2 x 6 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 215) | 600 | RM | |
| 84 | 66 | Supply and clamping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 221) | 295 | RM | |
| 85 | 67 | Supply and clamping of 3-1/2 x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 222) | 200 | RM | |
| 86 | 68 | Supply and clamping of 3-1/2 x 70 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 225) | 20 | RM | |
| 87 | 69 | Supply and laying of 4 x 10 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.(SD 202) | 200 | RM | |
| 88 | 70 | Supply and laying of 3-1/2 x 120 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.(SD 209) | 30 | RM | |
| 89 | 71 | Supply and laying of 3-1/2 x 150 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.(SD 210) | 110 | RM | |
| 90 | 72 | Supply and fixing of brass cable gland for 2 x 6 sq.mm. PVC armoured LTUG cable with earth connection (SD 181) | 36 | NO | |
| 91 | 73 | Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection (SD 186) | 4 | NO | |
| 92 | 74 | Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection (SD 189) | 2 | NO | |
| 93 | 75 | Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection (SD 191) | 2 | NO | |
| 94 | 76 | Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection (SD 192) | 4 | NO | |
| 95 | 77 | Supply delivery erection ,testing and commisioning of 100 KVA capacity Deisel Generator set 3 ph, 50 Hz,415 V, consisting of deisel engine capable of delivering continuous brake horse power with standard fittings,water cooled radiators,acoustic closureto restrict the noice level as per the CPCB norms,residential silencer with exhaut pipe arrangement (insulated with glass wool imside thwe building ) upto outside of the roomabove roof level,suitable alternator (brushless),self excited,self regulated, suitable for continuous operation .Standard cntrol panel, consisting of ameter with CTs and selector switch, Voltmeter with selector switch, MCCB, energmeter,earth fault relay,indicating lamps,fuses and required1.1 KV grade PVC armoured aluminium cable from alternaor to alternator control panel, 12/24 Vbattery, batteryleads, battery chrger ..etc. Coupling with gaurd ,fuel tank (8Hrs. capacity) common rigid MS channel baseframe, antivibration mounting pad etc ..complete with synchornised panel including all accessories items (AMF)(SOR Page No-143 Item No 5 a ) | 1 | No | |
| 96 | 77.01 | 100 KVA Generator erection chargess and others | 1 | No | |
| 97 | 78 | Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . (SD 233) | 4 | No | |
| 98 | 79 | Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD 234) | 12 | No | |
| 99 | 80 | Geophysical Investigation charges including preparation of geophysical report as per TWAD Board type circular including all cost of transportation and handling charges etc.,complete | 2 | NO | |
| 100 | 81 | Supply and delivery of 150mm (CM) 6KSC pvc casing pipe for bore well including cost ang convayance of material and labour charge etc complete. | 30 | RM | |
| 101 | 82 | Drilling of 150mm(6") dia Vertical clear bores in Hard rock in any habitation any where in Salem District to any required depth as directed b y the officers concerened including labour charges for inserting M.S/P.V.C Casing pipes to any reauired depth , assembilling in the drilled hole including welding joints if necessary . Grouting the cassing pipes including conducting proper yield test at final depath (by provinding 90 ' V' Notch fitted in a formed channel and the correct yield at the time of free flow in the channel while flushing the bore after completion of drilling process should be ascertained of and reported )including Bore cover transportation. crew and fuel charges for rigs and supporting Vechicles from one place to another etc Complete and as directed by officers Concerned. | |||
| 102 | 82.01 | Drilling of 150mm dia. bore wells in overburden soil including labour charges for insertion of casing pipes | 30 | RM | |
| 103 | 82.02 | Drilling of 150mm dia. bore wells in hard rock areas any where in Tamil Nadu including transportation to the worksite in hard rock areas and developing the bore wells | 530 | RM | |
| 104 | 83 | Supply and delivery of wet type 50LPMx 250m Headx 7.5 HP Bore well submersible pumpset with motor and confirming to IS 8034 with ISI marking with D.O.L pannel board as per standard specification. The pump set should be supplied with 5M flat submersible motor etc.,complete. complying with std. specifications. | 2 | NO | |
| 105 | 84 | Supply and delivery of 4.00sqmm flat type PVC insulated 3core copper cable confirming to IS694/1990 with ISI Marking suitable for submersible pump set etc complete. | 1040 | RM | |
| 106 | 85 | Supply and delivery of following pipeline materials from approved company including all cost and conveyance etc.,complete | |||
| 107 | 85.01 | 90mm 6Kg PVC Pipe SI 4985/2000 | 100 | RM | |
| 108 | 85.02 | 50mm G.I "m" Class pipe IS 1239/Part I/90 | 374 | RM | |
| 109 | 85.03 | 50mm Gun Metal Gate Valve | 5 | No | |
| 110 | 85.04 | Borewell Dummy | 2 | No | |
| 111 | 85.05 | Borewell pipe M.S Clamp | 4 | No | |
| 112 | 85.06 | 50 mm coupling | 90 | No | |
| 113 | 85.07 | 50 mm NRV | 2 | No | |
| 114 | 85.08 | 50 MM GI ELBOW | 14 | No | |
| 115 | 85.09 | 50 MM GI NIPPLE 0.60 M | 4 | No | |
| 116 | 85.1 | 50 MM GI NIPPLE 0.30 M | 4 | No | |
| 117 | 85.11 | 50 MM GI NIPPLE 0.15 M | 14 | No | |
| 118 | 85.12 | 50 mm gi union | 2 | No | |
| 119 | 85.13 | 50 mm gi tee | 4 | No | |
| 120 | 85.14 | 50mm GI Hex nipple | 8 | No | |
| 121 | 85.15 | wooden board | 4 | No | |
| 122 | 85.16 | 63 ams fuse unit | 6 | No | |
| 123 | 85.17 | 25 mm pvc pipe | 5 | RM | |
| 124 | 85.18 | 25 mm pvc bent | 25 | No | |
| 125 | 85.19 | 25 MM GI NIPPLE 0.30 M | 6 | No | |
| 126 | 85.2 | 25 mm pvc bush | 6 | No | |
| 127 | 85.21 | 25 pvc gate vale | 15 | No | |
| 128 | 85.22 | 110 MM PVC PIPE | 60 | No | |
| 129 | 85.23 | 110 MM TEE | 30 | No | |
| 130 | 85.24 | 110 MM BEND | 30 | No | |
| 131 | 85.25 | 110 MM ELBOW | 20 | No | |
| 132 | 85.26 | 32 MM PVC PIPE | 100 | RM | |
| 133 | 85.27 | 32 MM BEND | 25 | No | |
| 134 | 85.28 | 32 MM PVC TEE | 30 | No | |
| 135 | 85.29 | 32 MM PVC ELBOW | 30 | No | |
| 136 | 85.3 | 32MM COUPPLING | 30 | No | |
| 137 | 85.31 | 25 MM PVC TEE | 20 | No | |
| 138 | 85.32 | 25 MM PVC COUPPLIG | 20 | No | |
| 139 | 85.33 | 32 MM MTA | 30 | No | |
| 140 | 85.34 | 25 MM MTA | 30 | No | |
| 141 | 85.35 | 110 MM MTA | 10 | No | |
| 142 | 85.36 | 32 pvc gate vale | 15 | No | |
| 143 | 85.37 | 80 MM GI PIPE | 200 | RM | |
| 144 | 85.38 | 80 MM GI BEND | 5 | No | |
| 145 | 85.39 | 80 MM GI ELBOW | 5 | No | |
| 146 | 85.4 | 80 MM UNION | 3 | No | |
| 147 | 85.41 | 80 MM GI TEE | 50 | No | |
| 148 | 85.42 | 80 MM GI COUPPLING | 33 | No | |
| 149 | 85.43 | 80 MM GM GATE VALVE | 4 | No | |
| 150 | 86 | Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALEN | 3 | No | |
| 151 | 87 | Supply, erection, testing and commissioning Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frame including necessary vibration bad mounting etc., including conveying, fixing and incidental charges., etc., complete as per standard specification and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent) | 1 | No | |
| 152 | 88 | Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete | 20 | No | |
| 153 | 89 | Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 12.50 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition | 2 | No | |
| 154 | 90 | Supplying and fixing in position of Indian make White glazed earthen ware Flat Back Urinal of approved quality including dismantling masonry if necessary and redoing the same to original condition etc., complete as directed by the departmental officers. | 15 | No | |
| 155 | 90.01 | 20 mm SS TAP | 50 | No | |
| 156 | 91 | Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications. | 14 | No | |
| 157 | 92 | Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT | 3 | No | |
| 158 | 93 | Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALEN | 6 | No | |
| 159 | 94 | Towards labour charges for laying of pipe line with specials to proper slopes and gradients including all cost and conveyance etc.,complete as per standard specification. | 200 | RM | |
| 160 | 95 | Supply and delivery and fixing of 2000 litre HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., | 3 | No | |
| 161 | 96 | Labour charges for the erection of submersible pump set in bore well including fixing and joint submersible cable with proper clamps upto stater to require depth and also fixing of raiser pipes to the required depth valve erection clamp pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter Voltmeter,Ammeter,three pilot(indicating) lamps capacitor single phase preventor, water level guard and laying and jointing the cable and twin earthing as per IS rules etc complete. | 2 | No |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
