}

Cleaning And Repair In Water Supply Installation , Oh Reservoires , Ug Sumps And Water Supply Pumps At Mil Stn Abohar, Abohar Mil Stn-Punjab

Military Engineer Services-MES has published Cleaning And Repair In Water Supply Installation , Oh Reservoires , Ug Sumps And Water Supply Pumps At Mil Stn Abohar. Submission Date for this Tender is 02-11-2020. Pump Supply Tenders in Abohar Mil Stn Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

25704946
Cleaning And Repair In Water Supply Installation , Oh Reservoires , Ug Sumps And Water Supply Pumps At Mil Stn Abohar
National Competitive Bid
Indian
Punjab
Abohar Mil Stn
02-11-2020

Tender Details

Cleaning And Repair In Water Supply Installation , Oh Reservoires , Ug Sumps And Water Supply Pumps At Mil Stn Abohar

Key Value

Document Fees
INR 500 /-
EMD
INR 30000.0 /-
Tender Value
INR 15 Lakhs /-

BOQ Items

Name of Work: Cleaning and repair in water supply installation , OH reservoires, UG sumps and water supply pumps at Mil Stn Abohar
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Cleaning of inner surface underground water tank(Sump) of capacity 50000 Gallon manually by traind and skilled manpower of working in under ground sump reservior with suitable T&P and equipments. with safty equipments, Tools and safty measures. Draining out the contaminated muddy water from the bottem surface of reservior and cleaning the side walls with the help of wire brush including removal green fungs leaves and other dust and dirt ,scraping of dissolved impurities, removal of surface mud /silt ,cleaning the water and draining out complete unwanted meterial obtained from cleaning as wel as apply spray of suitableapproved disinfactant chemical safe for human being on inner surface of the tank writing the date of cleaning with synthetic enemal paint on outer side of tank complete all as specified by Engineer-ic-harge. 3 Each Job
2 2 Cleaning of inner surface underground water tank(Sump) of capacity 20000 Gallon manually by traind and skilled manpower of working in under ground sump reservior with suitable T&P and equipments. with safty equipments, Tools and safty measures. Draining out the contaminated muddy water from the bottem surface of reservior and cleaning the side walls with the help of wire brush including removal green fungs leaves and other dust and dirt ,scraping of dissolved impurities, removal of surface mud /silt ,cleaning the water and draining out complete unwanted meterial obtained from cleaning as wel as apply spray of suitableapproved disinfactant chemical safe for human being on inner surface of the tank writing the date of cleaning with synthetic enemal paint on outer side of tank complete all as specified by Engineer-icharge. 3 Each Job
3 3 Cleaning of semi underground sump/well of raw water tank(Raw Water Pump House) 20000 Gallons removing mud nd sediments including liquid by means of suitable manual labour with safety equipments tools and safety messures, ncluding scrubbing the inner surface by wire brush, brooms and removing the mud, green fungs, leaves, dust and dirts, draining out complete unwanted meterails from cleanning and making it fully fuctioanl to the entire satisfaction of Engineer-in-Charge including removal of sludge/ solid contents outside the defence land and writing the date of cleaning wtith synthetic enemal paint on outer side of tank complete all as specified and directd by Engineer-in Chanrge. 1 Each Job
4 4 Cleaning of inner surface of over head reservior 100000 Gallons capacity manually by trained and skilled manpower for working in over head reservoir with suitable T&P and equipments with safety equipment, tools and safety measures. Darining out the contaminted muddy water form the bottom surface fo over head reservoir and cleaning the side walls with the help or wire brush, incliding removal green fungs leaves and other sust and dirt, scraing of dissolved impurties, removal of surface mud/ silt, cleaning with water and draining out complet unwanted material obtained form cleaning as well as appy spray of suitable disinfactant chemical safe for human being on inner surface of the tank, writing the date of cleaning wit synthetic enemal paint on outer side of tankn complete all as specified and directed by engineer in Charge. 4 Each Job
5 5 Cleaning of inner surface of over head reservior 50000 Gallons capacity manually by trained and skilled manpower for working in over head reservoir with suitable T&P and equipments with safety equipment, tools and safety measures. Darining out the contaminted muddy water form the bottom surface fo over head reservoir and cleaning the side walls with the help or wire brush, incliding removal green fungs leaves and other sust and dirt, scraing of dissolved impurties, removal of surface mud/ silt, cleaning with water and draining out complet unwanted material obtained form cleaning as well as appy spray of suitable disinfactant chemical safe for human being on inner surface of the tank, writing the date of cleaning wit synthetic enemal paint on outer side of tankn complete all as specified and directed by engineer in Charge. 3 Each Job
6 6 Cleaning the clarifloculator fresh water at Filltration plant of diameter; 14.5 meter and depth exceedings 5 meter but not exceeding 7.5 meter by removing mud, sediments including liquid by mean of suitable manpower who is regulary cleaning the same job with safety messures, including scrabing the inner surface by wire brush, brooms and removing the mud, green fungs, leaves, dust and dirts, draining out complete unwanted materials obtained from cleanning and making it fully fuctioanl to the entire satisfaction of Engineer-in-Charge including removal of sludge/ solid contents outside the defence land and writing the date of cleaning wtith synthetic enemal paint on outer side of tank complete all as specified and directd by Engineer-in Chanrge. 1 Each Job
7 7 Cleaning of underground sludge water tank 10000 Gallons,6.5 mtr and depth exceeding 5 mtr but not exceeding7.5 mtr by removing(25 cum) sludge/ mud including liquid by means of suitable manual labour with safety equipments tools and safety messures, including scrubbing the inner surface by wire brush, brooms and removing the mud, green fungs, leaves, dust and dirts, draining out complete unwanted meterails from cleanning and making it fully fuctioanl to the entire satisfaction of Engineer-in-Charge including removal of sludge/ solid contents outside the defence land and writing the date of cleaning wtith synthetic enemal paint on outer side of tank complete all as specified and directd by Engineer-in Chanrge. 1 Each Job
8 8 Cleaning of inner surface of over head Back wash tank of capacity 10000 Gallons manually by trained and skilled manpower for working in over head reservoir with suitable T&P and equipments with safety equipment, tools and safety measures. Darining out the contaminted muddy water form the bottom surface fo over head reservoir and cleaning the side walls with the help or wire brush, incliding removal green fungs leaves and other sust and dirt, scraing of dissolved impurties, removal of surface mud/ silt, cleaning with water and draining out complet unwanted material obtained form cleaning as well as appy spray of suitable disinfactant chemical safe for human being on inner surface of the tank, writing the date of cleaning wit synthetic enemal paint on outer side of tank complete all as specified and directed by engineer in Charge. 1 Each Job
9 9 Supplying,installing,testing and commissioning of fully autometic star -delta starter for submersible motor in steel sheet encloser Model No. FASD IHDASAM2-E 3 phase 415 volt 10 HP/7.5 KW 50Hz complete all as specified and directed by Engineer-in-charge Make:HAVELLS or equiv.in HPL/INDOASIAN 2 Each
10 10 Supply and fix inreplacement of sluice valve flanged type of class PN 1.6 complete of size 100 mm dia complete with iron wheel, nuts, bolts and washer incl rubber gasket etc complete all as specified.\nMake : Kirloskar/BIR/Venus/Lotto 2 Each
11 11 Supply and fix inreplacement of sluice valve flanged type of class PN 1.6 complete of size 150 mm dia complete with iron wheel, nuts, bolts and washer incl rubber gasket etc complete all as specified.\nMake : Kirloskar/BIR/Venus/Lotto 3 Each
12 12 Supply and fix in replacement of CI non return valve(NRV) of size 100 mm incl nuts and volts, testing etc complete \nMake : Kirloskar/BIR/Venus/Lotto. 1 Each
13 13 Supply and fix in replacement of CI non return valve(NRV) of size 150 mm incl nuts and volts, testing etc complete.\n Make : Kirloskar/BIR/Venus/Lotto 4 Each
14 14 Cutting of grass, bushes, small trees, hedges, bushes and any other vegetation surrounding of clearwater pump house, over head resirvoir and raw water installation etc to entire satisfaction of Engineer-in-Charge and disposing the sme at distance not exceeding 50 metre away form the pond complete all as specified and as directed by Engineer - in-Charge. 2000 Per Sqm
15 15 M&L cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate for foundations,fillings and mass concrete all as specified and as directed by Engr in charge. 3 Per Cum
16 16 Disconnectiong electric connections, dismanting/ taking up electric motor 3 phase 440 volts, 50 HZ of capacity 15 HP from existing foundation coupied with pumping set, removing to workshop for repair, dismantling/ opening for required repair work including rewinding with super enamelled copper wire of existing gauge adn weight, tapping varnishing, reassemblying and bring back to installation and maing foundctional after e-fixing on commissining complete all as specified and directed y Engineer-in- charge. Make pf winding wire shall be ATLAS/Devi Dyal/BPL 2 Each Job
17 17 M&L disconnecting/dismantling and strip opening of worn out/ defective electric motor of any make and Capacity of 40 HP, 3 phase 415 volts AC supply, taking out burnt stator winding, servicing cleaning of stator slots, bearing, bushes etc rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, Varnishing, china glass paper,'F' class paper,Thick sheet paper ( packing sheet) and drying, and replacement of rusted nut bolts and washer,seal etc, assembling, testing installed and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge 3 Each job
18 18 All as per item No 17 here in before but of capacity 30 HP, 3 phase 415 volts AC supply complete all as specified and directed with entire satisfaction of Engineer in Charge. 3 Each job
19 19 M&L disconnecting/dismantling and strip opening of worn out/ defective electric motor of any make and Capacity of 60 HP, 3 phase 415 volts AC supply, taking out burnt stator winding, servicing cleaning of stator slots, bearing, bushes etc rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, Varnishing, china glass paper,'F' class paper,Thick sheet paper ( packing sheet) and drying, and replacement of rusted nut bolts and washer,seal etc, assembling, testing installed and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge 1 Each job
20 20 M & L disconnecting electric connections,dismantling,taking up centrifugal pumping set capacity 30/40HP from existing foundation,removing to workshop for repair,bringing back to installation after repairing and welding,brazing,facing grinding, turning repairing/replacement of defective parts,re-assemblying andfixing to its original position and testing pumping set complete all as specified. 6 Each job
21 21 Supply only following spare parts of centrifugal pump set 30/ 40HP 0.1 Each job
22 22 (a) GI Impeller 3 Each
23 23 (b) Brass bushs 4 Each
24 24 (c ) Stainless steel shaft 2 Each
25 25 (d) Ball bearing as per existing size and make 6 Each
26 26 S&F in replacement 3 pole MCCB 100 Amps, 50 HZ, 415 Volts, breaking capacity 16 KA complete all as specified and directed. \nMake Havells, Indoasian,L&T 4 Nos
27 27 S & F Star delta startor fully automatic suitable for 415 Volts of capacity 15 HP Motor, complete all as specified and directed. 1 Nos
28 28 S & F Single phase preventer for any capacity of motors complete all as specified and directed. 6 Nos
29 29 M&L for replacement of mechanical type water level indicator and Supply and installation of digital water level indicator device with the folowing component:- 5 Each job
30 30 (a) Supply and installation,testing of Digital water level indicator device operating on single phase supply,direct display in 150 mm size digit and word system in fit and gallon for water level of over head tank and UG sump ensuring alarm while water fall or rise at predetermined limit. One minute auto alarm system has to be provided. 0.1 Each job
31 31 (b)The entire unit must operate through a compact electronic circuit,which must ensure reliable operating at 230 volts ± 5% with reliable in digit display & alarm at low and high level of sump/over head tank. 0.1 Each job
32 32 (c)The circuit must be in housed MS CRC sheet box with nylon moulded connection strips.The level system must restistance transducer,which unaffacted by corroson and other contacts available in water.The product must be controlled by micro switch(should not be sensor system). 0.1 Each job
33 33 (d)The whole unit must electronically controlled and the upper level and lowrer indicator must be highly sensitive Micro switch.The complete unit must be in two parts.Each complete part must be fitted in MSCRC sheet box with powder coating paints. seperately one must be installed on top of sump/over head tank and second on MS angle iron frame on ground and GI Sheet Shead with PCC foundation,nuts,bolts,washers etc complete all as specified. 0.1 Each job
34 34 (e) Expenditure for installation the unit, manufacturer Engineer, rep will be provided by the contractor are included in above quoted rates and other supporting items must be provided by the contractor complete. 0.1 Each job
35 35 S & F in repairs of integral LED type aviation obstruction light comprising of aluminium housing with polycarbonate enclosure,302 Nos LED to be provided, connector etc complete including provn of fixing of GI pipe 25/40 mm dia 300 mm long on top incl threading,making holes in pipes for wire and fixing/grouting on the top of the overhead reservoir complete all as directed by Engr-in-Charge.Make: Bajaj cat No BGAV 302 LED or equivalent in Philips/Havells/CG 7 Each
36 36 Supply ,fixing in replacement of Cast iron Foot Valve Flanged ends duly drilled ISI marked conforming to IS -4038 and suitable for 150 mm bore pipe.complete all as directed by Engr -n -Charge. 6 Each
37 37 Supply ,fixing in replacement of Cast iron Foot Valve Flanged ends duly drilled ISI marked conforming to IS -4038 and suitable for 100 mm bore pipe.complete all as directed by Engr -n -Charge. 6 Each
38 38 M & L for in replacement of construction of brick masonary valve pit/chamber of under mentioned sizes (Internal dimensions) including necessary excavation and earth work, PCC plaster in cm 1:6 on inside and outside MS angle iron 40 x40 x 6m thick frame work hold fasts CRCA MS sheet cover 3mm thick , duly painted with one coat of bituminous paint of approved quality Godrej (freedom) lock all as specified. 0.1 Each job
39 39 NOTE: (1) Brick walls shall be 23cm thick built in cement mortar (1:6) (2) Plaster shall be 15mm thick in cement mortar (1:4) (3) PCC in foundation shall be 15mm thick in cement concrete (1:4:8) type D2 using 40mm graded stone aggregate extended 15mm all around from the external face of the walls. (4) PCC coping shall be 15mm thick in cement concrete (1:2:4) type B1 using 20mm graded stone aggregate including grouting of angle iron frame in PCC. (5) Depth of wall pit will be reckoned fro the top of PCC in Foundation. 0.1 Each job
40 40 (a) size 90cm x 90cm x90cm (internal Dimension) 3 Each
41 41 (b) size 60cm x 60cm x90cm (internal Dimension) 4 Each
42 42 (c) size 120cm x 120cm x90cm (internal Dimension) 4 Each
43 43 Removing filter media (gravel, sand etc) of water filter beds (3X20000 gallons) one by one, washing media, removing sludge, mud, clay and all foreign materials. Setting aside useful media for reuse complete all as specified and directed by Engr-in-charge 1 Each job
44 44 M&L for distempering on walls with oil emulsion paint(OBD) having old decorated surface with one coat on all of over head tank,UG sump etc complete all as specified and as directed. 800 Per SQM
45 45 M&L for Painting on wall of over head tank,UG sump with black paint approx size 4 ft x 3 ft and Writing the name of Installation,Capacity of reserviors,date of cleaning and due date of cleaning etc. with minimum size of word 10 cm and maximum size 30 cm (as per colour code given at the time of execution) complete all as specified and directed by Engr -in- Charge. 10 Each Job
46 46 S & F in Replacement of nut bolts & washers of sluice valves, non return valve , gland plate, motors and pumps etc. .complete all as specified and directed by Engrin-charge. 65 Kg
47 47 S & F MCCB 4 pole 415 V, adjustable type250 amps with breaking capacity of 36 KA all as specified and directed by Engg in charge Make :IndoAsian/HPL/L& T 2 Each
48 48 S & F MCCB 4 pole 415 V, adjustable type 200 amps with breaking capacity of 36 KA all as specified and directed by Engg in charge 1 Each
49 49 S & F MCCB 3 pole 415 V, adjustable type 63 Ampamps with breaking capacity of 16 KA all as specified and directed by Engg in charge 2 Each
50 50 S & F MCCB 3 pole 415 V, adjustable type 50 amps with breaking capacity of 16 KA all as specified and directed by Engg in charge 3 Each
51 51 S & F Star delta startor fully automatic suitable for 415 Volts of capacity 40 HP Motor, complete all as specified and directed. Make as per sample 1 Nos
52 52 S & F Star delta startor fully automatic suitable for 415 Volts of capacity 30 HP Motor, complete all as specified and directed. Make as per sample 1 Nos
53 53 Supply only flexible type tyre coupling of size TC-15 which contain tread inside complete all as specified and directed by Engr-in-charge. 5 Each
54 54 Supply only flexible type tyre coupling of size TC-17/TC-19 which contain tread inside complete all as specified and directed by Engr-in-charge. 5 Each
55 55 Chemical examination of Raw water of the plant at water point ( From Authorised lab and report will be submitted in triplicate to deptt) complete all as specified and directed by Engr-in-charge. 6 Each
56 56 Bacteriological examination of clear water of the plant at water point ( From Authorised lab and report will be submitted in triplicate to deptt) complete all as specified and directed by Engr-in-charge. 6 Each
57 57 Supply only pig lead suitable for jointing different size of pipe lines complete all as specified and directed by Engr-in-charge. 100 Kg
58 58 M & L for prepration old metallic , treated irregular and curved suface of pipes , valves, motor pumps, electric panels, steel railing, aggitator of flaculators in cluding removing existing treatment by scrapping burning complete for painting with two coats of Synthetic enamel paint complete all as specified and directed by Engr-in-charge. 250 Per Sqm
59 59 Supply only vinegar spray suitable on grass at water supply installation complete all as specified and directed by Engr-in-charge 15 Ltrs
60 60 Supply only gland packing of size 9mm/ 13 mm for using motors , pumps, valve etc complete all as specified and directed by Engr-in-charge 70 Each
61 61 Repairs and servicing of flaculators assembly , oiling greasing of rotating and fixed arms and replacement of central thust bearing , slip ring assembly , fan belt, chain, repair servicing of flaculator shaft complete all as specified and directed by Engr-in-charge. 1 Each job
62 62 Supply only grease of good quality suitable and withstand high temprature during functioning for motor and pump complete all as specified and directed by Engr-in-charge. 20 Kg
63 63 Supply and fixing rubber mat of size ( 1 meter x 2 meter x 19 mm) uses in pump house for safety purposes for operators complete all as specified and directed by Engr-in-charge. 5 Each
64 64 Supply and fixing submersible flat copper conductor cable of size 20 Sqmm x 3 core for motors complete all as specified and directed by Engr-in-charge 130 RM
65 65 Supply and fixing submersible flat copper conductor cable of size 10 Sqmm x 3 core for motors complete all as specified and directed by Engr-in-charge 150 RM
66 66 Supply and fix inreplacement of sluice valve flanged type of class PN 1.6 complete of size 200 mm dia complete with iron wheel, nuts, bolts and washer incl rubber gasket etc complete all as specified.\nMake : Kirloskar/BIR/Venus/Lotto 1 Each
67 67 Supply and fix inreplacement of sluice valve flanged type of class PN 1.6 complete of size 250 mm dia complete with iron wheel, nuts, bolts and washer incl rubber gasket etc complete all as specified.\nMake : Kirloskar/BIR/Venus/Lotto 1 Each
68 68 Supply and fix inreplacement of sluice valve flanged type of class PN 1.6 complete of size 300 mm dia complete with iron wheel, nuts, bolts and washer incl rubber gasket etc complete all as specified.\nMake : Kirloskar/BIR/Venus/Lotto 1 Each
69 69 Supply and fix in replacement of CI non return valve(NRV) of size 300 mm incl nuts and volts, testing etc complete \nMake : Kirloskar/BIR/Venus/Lotto. 1 Each
70 70 Cleaning of underground sewage water Sump at Bn-I, Bn-II and Bn-III , 175 MH and 89 Bde by means of dewatering the water, desliting and removing the muddy water and sludge from the tank,incl existing stacked soil held near the tank and remove out side to diffence land from the Sump with the help of machinary as reqired . Making dry the side wall and bottom, cleaning the walls & bottom with fresh water incl removing grass,bushes & branches of plants(installation) complete cleaning of Sewage sump using man power as required.Minor repair like plastering is involved in this work, including epoxy coated paint complete all as specified and as directed. 5 Each Job
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail