Military Engineer Services-MES has published Repair Or Replacement And Cleaning Of Oh Tanks , Removal Of Debris , Repairs To Wooden Or Joinery , Cupboard And Misc Work , Repairs To Plumbing , Sanitary Fittings , Floors And Roofing And Connected Works At Site R Sheva Under Ge Af Thane. Submission Date for this Tender is 03-11-2020. Shed Construction Tenders in THANE Maharashtra. Bidders can get complete Tender details and download the document.
Name of Work: REPAIR / REPLACEMENT AND CLEANING OF OH TANKS, REMOVAL OF DEBRIS ,REPAIRS TO WOODEN/JOINERY, CUPBOARD AND MISC WORK ,REPAIRS TO PLUMBING, SANITARY FITTINGS, FLOORS & ROOFING AND CONNECTED WORKS AT SITE 'R' SHEVA UNDER GE AF THANE | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Unnamed: 2 | Quantity | Units | |
1 | 1.01 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises ,complete all as specified and directed by Engr-in-charge. | 294 | Sqm | |
2 | 2 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) ,complete all as specified and directed by Engr-in-charge.. | 129.5 | Cum | |
3 | 3 | Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key, scrubbing down with water etc ,complete all as specified and directed by Engr-in-charge.. | 418 | Sqm | |
4 | 4 | M&L 25mm thick cement concrete 1:2:4 type B0 (using 12.5mm graded Stone aggregate) as in floor ,complete all as specified and directed by Engr-in-charge. | 180 | Sqm | |
5 | 5 | M&L Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. et and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:4 for receiving floor finished,complete all as specified and directed by Engr-in-charge. | 150 | Sqm | |
6 | 6 | M&L Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:3 as backing coat to receive skirting / dado,complete all as specified and directed by Engr-in-charge. | 15 | Sqm | |
7 | 7 | M&L Vitrified Ceramic tiles Double charged 10mm thick (Square / rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:4 for receiving floor finished ,complete all as specified and directed by Engr-in-charge. | 30 | Sqm | |
8 | 8 | M&L Vitrified Ceramic tiles Double charged 10mm thick (Square / rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:3 as backing coat to receive skirting / dado ,complete all as specified and directed by Engr-in-charge. | 3 | Sqm | |
9 | 9 | S&F coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:3 as backing coat to receive skirting / dado, complete all as specified and directed by Engr-in-charge. | 220 | Sqm | |
10 | 10 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement plaster, CM 1:3 using water proofing compound in sunken portion of bath,kitchen sink & water closet , complete all as specified and directed by Engr-in-charge. (Note:- WPC will be accounted & paid separately) . | 30 | Sqm | |
11 | 11 | M&L hand cut Kota stone flooring 20 to 25 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in floor, treads etc including rubbing and mirror polishing laid over and including screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:6 , complete all as specified and directed by Engr-in-charge. | 25 | sqm | |
12 | 12 | M&L for hand cut kota stone 18 to 20mm thick as in skirting /Dado, riser of steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of kota stone slab including, rubbing and mirror polishing laid over and including 10mm thick on fair faces of brick work or concrete surfaces as backing coat in CM 1:4 , complete all as specified and directed by Engr-in-charge. | 5 | sqm | |
13 | 13 | S & F in repair Vitreous China WC (Pedestal pattern white) including fixing bolts with PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 ltr capacity, seat cover black closed pattern with flat bottom, and mild steel chromium plated and flush pipe PVC 32mm dia for low level cistern , complete all as specified and directed by Engr-in-charge. | 2 | Each | |
14 | 14 | S&F Vitreous China WC (squatting pan) Orissa pattern size 580x440mm white with intergal foot rests including provision of lime concrete bedding, fixing bolts with PVC flushing cistern L/L of 10 ltr capacity with intel ball valve, float and handle including brackets, flush pipe PVC 32mm dia for low level cistern complete all as specifief and directed , complete all as specified and directed by Engr-in-charge. | 6 | Each | |
15 | 15 | S&F Vitreous china Basin white of size 550 x 400mm including fancy type pillar tab 15mm dia chromimum plated, waste coupling 32mm bore of PTMT and plug and proclained stopper including brackets and 32mm dia PVC flush pipe etc, complete all as specified and directed by Engr-in-charge. | 6 | Each | |
16 | 16 | S&F in repairs vitreous china bowl urinal flat back, size of 465mmx355mmx265mm (minimum) white with grating and union for discharge pipe including 32mm GI waste pipe. Complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screw, pointing around urinal back in cement, fixing with brackets, flush pipe, greating and union for discharge pipe , complete all as specified and directed by Engr-in-charge. | 3 | each | |
17 | 17 | S&F in repair low level flushing cistern plastic valve less syphonic action type white with inlet ball valve float chain and ball bracket & capacity 10 ltr ISI marked including 32mm PVC flush pipe , complete all as specified and directed by Engr-in-charge.. | 15 | Each | |
18 | 18 | S&F in repair 15mm dia pillar tap quarter turn chromium plated cast copper alloy with capstan head,screwed down high pressure with or with out letters Hot or cold with long screwed for iron pipe , complete all as specified and directed by Engr-in-charge. | 25 | Each | |
19 | 19 | S&F in repair quarter turn bib tap 15 mm dia chromium plated cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe , complete all as specified and directed by Engr-in-charge. | 40 | Each | |
20 | 20 | S&F in reapair quarter turn stop cock valves 15 mmcast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union , complete all as specified and directed by Engr-in-charge. | 16 | Each | |
21 | 21 | S&F in reapair quarter turn stop cock valves 20 mm cast copper alloy ,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions , complete all as specified and directed by Engr-in-charge. | 6 | Each | |
22 | 22 | Fixing only 15 to 20mm bore bib tap as obtained through taking down of GI steel tubing fitting here- in-after using necessary new fitting etc , complete all as specified and directed by Engr-in-charge.. | 15 | Each | |
23 | 23 | Fixing only 15 to 20 mm bore stop cock obtained through taking down of GI steel tubing fitting here- in-after using necessary new fitting etc, complete all as specified and directed by Engr-in-charge.. | 16 | Each | |
24 | 24 | Taking down steel tubing & connections including cleaning for refixing or removal to store , complete all as specified and directed by Engr-in-charge,of the following sizes :- | |||
25 | 24.01 | 15mm bore of pipe | 215 | RM | |
26 | 24.02 | 25mm bore of pipe | 240 | RM | |
27 | 25 | M&L for 15mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors, complete all as specified and directed by Engr-in-charge. | 105 | RM | |
28 | 26 | Refixing old GI steel tubing with Provision of necessary GI tube fittings & connections in new or old position (walls, ceiling, floors etc), for 15 mm bore of pipe , complete all as specified and directed by Engr-in-charge. (Note: Serviciable tube retrived from relevent item to be reused). | 110 | RM | |
29 | 27 | M&L for 20mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors , complete all as specified and directed by Engr-in-charge.. | 100 | RM | |
30 | 28 | Refixing old GI steel tubing with Provision of necessary GI tube fittings & connections in new or old position (walls, ceiling, floors etc) 20 mm bore of pipe , complete all as specified and directed by Engr-in-charge.(Note: Serviciable tube retrived from relevent item to be reused). | 140 | RM | |
31 | 29 | S&F 32mm high density polyethylene pipe (HDPE) of pressure rating 6 kgf/ sq cm fixed to walls ceiling or in floor , complete all as specified and directed by Engr-in-charge. | 16 | RM | |
32 | 30 | S&F in repair PVC connectors 15mm bore, 600mm long with brass connections & washers , complete all as specified and directed by Engr-in-charge. | 25 | Each | |
33 | 31 | S&F,cast iron Nahani trap with grating fixed in position , complete all as specified and directed by Engr-in-charge, of the following sizes :- | |||
34 | 31.01 | 100 mm dia of outlet | 10 | Each | |
35 | 31.02 | 75mm dia of outlet | 10 | Each | |
36 | 32 | S&F in repair ,Greating of 100 mm dia of PTMT fixed in position , complete all as specified and directed by Engr-in-charge. | 10 | Each | |
37 | 33 | S&F in repair, Plastic Seat cover for pedestal pan , complete all as specified and directed by Engr-in-charge. | 5 | Each | |
38 | 34 | S&F Stainless steel set of six peg hooks , complete all as specified and directed by Engr-in-charge. | 59 | Each | |
39 | 35 | S&F for stainless steel tubular towel rail 20mm dia, 'D' type 60cm long between flanges, complete all as specified and directed by Engr-in-charge. | 20 | Each | |
40 | 36 | S&F in repair, looking mirror of size 600mm x 450 mm beveled edge of selected quality glass,mounted on 6mm thick commercial type plywood and fixed to wooden plugs with cromium plated brass screws and cup washers , complete all as specified and directed by Engr-in-charge. | 10 | Each | |
41 | 37 | S&F Mirror cabinet (400 x 500)mm (ISI Marked), fancy type , complete all as specified and directed by Engr-in-charge. Make :Prayag Cat No P-554 | 6 | Each | |
42 | 38 | S&F quarter turn two way angle cock chromium plated cast copper alloy with crutch or butter fly handle screwed for iron pipe and fixed including all fixtures and fasteners for fixing to the wall etc , complete all as specified and directed by Engr-in-charge. | 4 | Each | |
43 | 39 | S&F stainless steel Towel ring of squre/circular /trapozoidal in shape of minimum larger dimension 230 to 400 mm including all fixtures and fasteners for fixing to the wall , complete all as specified and directed by Engr-in-charge. | 6 | Each | |
44 | 40 | S&F stainless steel soap dish including all fixtures and fasteners for fixing to the wall etc, complete all as specified and directed by Engr-in-charge. | 15 | Each | |
45 | 41 | S & F, CP brass health faucet jet spray with 1.5 mtr tube & hook , complete all as specified and directed by Engr-in-charge. (Make: Prayag CAT No BEA-41 or equivalent in parryware/ Hindware) | 5 | Each | |
46 | 42 | S & F,' L' bend type Wall Mixer (ISI Marked), fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15mm bore , complete all as specified and directed by Engr-in-charge. | 2 | Each | |
47 | 43 | S & F,Round Rain Shower with arm (ISI Marked), fancy type chromium plated cast copper alloy fixed of size 15mm bore , complete all as specified and directed by Engr-in-charge.\n | 6 | Each | |
48 | 44 | S&F ,in repairs, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm , complete all as specified and directed by Engr-in-charge. | 6 | Each | |
49 | 45 | S&F stainless steel kitchen Rack suitable for housing 10 plate of size 30''x 30''x10'' , complete all as specified and directed by Engr-in-charge. | 5 | Each | |
50 | 46 | Dismentling of cast iron/PVC drain pipes jointed in cement mortar and taking out , complete all as specified and directed by Engr-in-charge,of the following sizes:- | |||
51 | 46.01 | 100mm internal dia | 60 | RM | |
52 | 46.02 | 75mm internal dia | 25 | RM | |
53 | 47 | S&F PVC (SWR) pipes, single socketed in any length with ruber ring joints fixed to wall , complete all as specified and directed by Engr-in-charge,of the following sizes:- | |||
54 | 47.01 | 110mm bore dia | 50 | RM | |
55 | 47.02 | 75mm bore dia | 25 | RM | |
56 | 48 | S&F PVC (SWR) bends, any radius with access door, complete all as specified and directed by Engr-in-charge,of the following sizes:- | |||
57 | 48.01 | 110mm bore in mm | 6 | Each | |
58 | 48.02 | 75mm bore in mm | 6 | Each | |
59 | 49 | S&F PVC (SWR) branch piece, single (Single 'Y') equal or with acess door , complete all as specified and directed by Engr-in-charge ,of the following sizes:- | |||
60 | 49.01 | 110mm bore | 5 | Each | |
61 | 49.02 | 75mm bore | 5 | Each | |
62 | 50 | S&F PVC (SWR) 110mm bore WC connector with lip type ring , complete all as specified and directed by Engr-in-charge. | 5 | Each | |
63 | 51 | S&F PVC (SWR) floor trap 75mm diameter outlet in mm, plain with grating including jointing with solvent cement , complete all as specified and directed by Engr-in-charge. | 5 | Each | |
64 | 52 | S&F PVC (SWR) vent cowl , complete all as specified and directed by Engr-in-charge ,of the following sizes:- | |||
65 | 52.01 | 110mm bore | 10 | Each | |
66 | 52.02 | 75mm bore | 10 | Each | |
67 | 53 | M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement , complete all as specified and directed by Engr-in-charge. | 40 | Sqm | |
68 | 54 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finishing the surface with neeru etc , complete all as specified and directed by Engr-in-charge. | 90 | Sqm | |
69 | 55 | M & L for rendering 20 mm thick in cement mortar 1:4 (15 mm thick backing coat and 5mm thick finishing coat) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound , complete all as specified and directed by Engr-in-charge. (Note: water proofing compound shall be measured and paid seperately). | 60 | Sqm | |
70 | 56 | Supply only integral water proofing compound , complete all as specified and directed by Engr-in-charge.. | 18.966 | Kg | |
71 | 57 | M & L preparation of plastered or unplastered new surfaces of walls and applying two coat of distemper on Walls over a coat of alkali resistant priming paint , complete all as specified and directed by Engr-in-charge. | 90 | Sqm | |
72 | 58 | M & L preparation of plastered or unplastered new surfaces of ceilings and applying two coat of distemper on ceilings over a coat of alkali resistant priming paint , complete all as specified and directed by Engr-in-charge. | 40 | Sqm | |
73 | 59 | M&L for Preparing new plastered surfaces of wall and applying two coats of acrylic weather coat exterior paint over a coat of weather coat primer , complete all as specified and directed by Engr-in-charge. | 60 | Sqm | |
74 | 60 | Demolition of lime concrete Concrete in ground floors and pavings exc 15 cm thickness above ground floors , complete all as specified and directed by Engr-in-charge. | 6.38 | Cum | |
75 | 61 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point , including loading, unloading and stacking at the destination , complete all as specified and directed by Engr-in-charge. | 6.38 | Cum | |
76 | 62 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and Brushing neat cement slurry with 3 kg of cement per sqm , complete all as specified and directed by Engr-in-charge. | 225 | Sqm | |
77 | 63 | Removing existing water proofing treatment where so ever exist (except concrete padding) and removing debris/rubbish off the site , complete all as specified and directed by Engr-in-charge. | 600 | Sqm | |
78 | 64 | M&L for PCC 1:2:4 B-0 using 12.5mm graded aggregate as levelling course to finished even and smooth with using extra cement, complete all as specified and directed by Engr-in-charge. | 6.38 | Cum | |
79 | 65 | M&L for rendering 10mm thick on CM (1:3) on concrete roof top and chajjas surface finished even and smooth to get uniform level surface for laying of membrane treatement,with using water proofing compound , complete all as specified and directed by Engr-in-charge. | 225 | Sqm | |
80 | 66 | M&L for APP modified roof treatment over exissting RCC roof complete all as specified and as directed by engineer -in-charge and as specified hereunder (a) Applying bitumen primer @ 0.40 lit/sqm with density of 0.87 kg/lit at 25 degree C on the prepared dry roof surface (b) Laying 3mm thick APP membrane including aluminium layer on top, weight not less than 3.00 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorised applicator of manufacturer of APP membarane (c ) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 kg/sqm prescribed by manufacturer , complete all as specified and directed by Engr-in-charge. | 600 | Sqm | |
81 | 67 | Dismantling boarding/ceiling of any description, fixed in any position with nails etc including frame work of aluminium or timber etc , complete all as specified and directed by Engr-in-charge. | 83 | Sqm | |
82 | 68 | M&L for 15mm thick mineral board fine fissured in true horizontal level of size 600mm x 600 mm as in false ceiling hot dipped galvanized steel section, exposed surfaces with precoated capping, main centre to centre of size 24mm x 32mm having 0.27 mm gauge at every 1200mm centre to centre and wall angle of size 19mm x 19mm having 0.35 mm gauge fixed to the periphery of the wall . The above grid is suspended at every 1200mm c/c on both directions using 3 mm thick prestrightened GI wire, laying etc, complete all as specified and directed by Engr-in-charge. | 63 | Sq m | |
83 | 69 | Fixing only Perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid , complete all as specified and directed by Engr-in-charge. | 20 | Sqm | |
84 | 70 | Dismentling Asbestos cement corrugated or semi corrugated sheet in roof covering , complete all as specified and directed by Engr-in-charge.. | 110 | Sqm | |
85 | 71 | M & L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed by Engr-in-charge. | 110 | Sqm | |
86 | 72 | M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed by Engr-in-charge. | 5 | Sqm | |
87 | 73 | Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles , complete all as specified and directed by Engr-in-charge. | 2 | Cum | |
88 | 74 | M&L for walling precast cement concrete block masonary with solid blocks ,exc 10 cm in width in 1:3:6 type C1 20mm graded stone aggregate set in cement morter 1:6 etc , complete all as specified and directed by Engr-in-charge. | 2 | CUM | |
89 | 75 | M & L for Rendering 10mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished the surfaces even and smooth and without using extra cement , complete all as specified and directed by Engr-in-charge | 193 | Sqm | |
90 | 76 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate, in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed by Engr-in-charge. | 1 | Cum | |
91 | 77 | Disconnecting existing tanks ,Capacity Exc 500 ltr & n. exc 1000 ltr ,setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc measured separately) , complete all as specified and directed by Engr-in-charge. | 300 | Each | |
92 | 78 | Disconnecting existing tanks Capacity Exc 1000 ltr & n. exc 2000 ltr ,setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position (Cleaning repairing, etc measured separately) , complete all as specified and directed by Engr-in-charge. | 9 | Each | |
93 | 79 | M&L for Cleaning and removing all scale and dirt etc, from tanks capacity exc 500 ltr & n. exc 1000 ltr and from mounths of circulating pipes etc , complete all as specified and directed by Engr-in-charge. | 300 | Each | |
94 | 80 | M&L for Cleaning and removing all scale and dirt etc, from tanks capacity exc 1000 ltr & n. exc 2000 ltr and from mounths of circulating pipes etc , complete all as specified and directed by Engr-in-charge. | 10 | Each | |
95 | 81 | Dismantling water tank capacity exc 500 and n exc 1000 ltr and removing to store , complete all as specified and directed by Engr-in-charge. | 23 | Each | |
96 | 82 | S&F 500 Ltr Rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I , complete all as specified and directed by Engr-in-charge. | 19 | Each | |
97 | 83 | S&F1000 Ltr Rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I , complete all as specified and directed by Engr-in-charge. | 4 | Each | |
98 | 84 | S&F 20mm Ball brass valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms), complete all as specified and directed by Engr-in-charge. | 23 | Each | |
99 | 85 | S&F 20mm Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed , complete all as specified and directed by Engr-in-charge. | 23 | Each | |
100 | 86 | S&F in repair 20mm Ball brass valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) , complete all as specified and directed by Engr-in-charge. | 50 | Each | |
101 | 87 | S&F in repair 15mm Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed , complete all as specified and directed by Engr-in-charge. | 85 | Each | |
102 | 88 | S&F in repair 20mm Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed , complete all as specified and directed by Engr-in-charge. | 60 | Each | |
103 | 89 | Cutting existing 20mm steel tubing for alterations or additions (Each cut measured) in any position without taking down , complete all as specified and directed by Engr-in-charge. | 60 | Each | |
104 | 90 | M&L for writting date on tank with synthetic enamel paint , writing letters or figures (in block, roman, etc ) n exc 50 cm high in the given format as "CLEANED ON : DD/MM/YY",the same shall be considerd as one job , complete all as specified and directed by Engr-in-charge. | 210 | Job | |
105 | 91 | M&L for Preparing new plastered surfaces on wall and applying two coats of white wash , complete all as specified and directed by Engr-in-charge. | 193 | Sqm | |
106 | 92 | Taking down chowkhats or frames not exc 1.5 sqm with shutters (without taking off shutters from the frames) , complete all as specified and directed by Engr-in-charge. | 34 | Each | |
107 | 93 | Taking down door Chowkhats alongwith shutters Exc 1.5 sqm but not exc 4 sqm each , complete all as specified and directed by Engr-in-charge. | 15 | Each | |
108 | 94 | Taking down Shutters of any description n exc 1 sqm each , complete all as specified and directed by Engr-in-charge. | 30 | Per Leaf | |
109 | 95 | Taking down Shutters exc 1 sq. m and n exc 2 sq. m each , complete all as specified and directed by Engr-in-charge. | 29 | Per Leaf | |
110 | 96 | Repairs to shutters of any description n. exc 1 sqm each Resecuring or easing & adjusting without taking down , complete all as specified and directed by Engr-in-charge. | 16 | Each | |
111 | 97 | Repairs to shutters of any description Resecuring or easing & adjusting without taking down , area exc 1 sqm but n. exc 2 sqm , complete all as specified and directed by Engr-in-charge. | 20 | Each | |
112 | 98 | Taking down damaged or broken aluminum anodized/powder coated windows/doors frames or Panels with necessary accessories / fitting including of aluminium section, rectification of roller, wiremesh, window panes and refixing duely repaired with new material , complete all as specified and directed by Engr-in-charge.\n(Note : All Materials (i.e members/hardwares and other relevent connected accessories) used in rectification shall be paid separately under relevent items of Sch A) | 23 | Sqm | |
113 | 99 | (a) Supply only aluminium anodised/powder coated frame for doors/windows, ventilators with one or more rebates including joining cleat for fixing , complete all as specified and directed by Engr-in-charge. | 20 | Kg | |
114 | 100 | (b) Supply only rollers for sliding windows including fixing to aluminium windows section after taking down old unserviceable rollers , complete all as specified and directed by Engr-in-charge. | 26 | Nos | |
115 | 101 | (c) Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed by Engr-in-charge. | 11 | Sqm | |
116 | 102 | (d) Supply only sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane , complete all as specified and directed by Engr-in-charge. | 10 | Sqm | |
117 | 103 | (e) Supply only aluminium anodised/powder coated star lock for doors/windows ,complete all as specified and directed by Engr-in-charge. | 15 | Each | |
118 | 104 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed by Engr-in-charge. | 97.92 | RM | |
119 | 105 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing , complete all as specified and directed by Engr-in-charge. | 27.846 | Sqm | |
120 | 106 | S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints , complete all as specified and directed by Engr-in-charge. | 0.75 | Cum | |
121 | 107 | S&F for 35mm thick IInd class HW rail and style plain framed, panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln seasoned and chemically pressure treated , complete all as specified and directed by Engr-in-charge. | 58.2714 | Sqm | |
122 | 108 | S&F for 35mm thick Iind class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats , complete all as specified and directed by Engr-in-charge. | 52.8264 | Sqm | |
123 | 109 | S&F 30mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc , complete all as specified and directed by Engr-in-charge. | 8.7 | Sqm | |
124 | 110 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and directed by Engr-in-charge. | 35 | Kg | |
125 | 111 | Cutting holes in brick walls exc half bricks but not exc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1, complete all as specified and directed by Engr-in-charge. | 70 | Each | |
126 | 112 | S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long ,complete all as specified and directed by Engr-in-charge. | 60 | Each | |
127 | 113 | S&F extruded aluminium alloy handles 150mm fabricated type, anodised ,complete all as specified and directed by Engr-in-charge. | 149.5 | Each | |
128 | 114 | S&F door sliding bolt aldrop 250 mm long Stainless steel ,complete all as specified and directed by Engr-in-charge. | 10 | Each | |
129 | 115 | S&F Aluminium alloy, anodised, sliding door bolt with hasp 250 mm long, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy ,complete all as specified and directed by Engr-in-charge. Make:-Classic/Shalimar | 15 | Each | |
130 | 116 | S&F in repair ,Aluminium alloy, anodised, sliding door bolt with hasp 250 mm long , staple (bolt type) and fixing clips of sheet, cast or extrude sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy ,complete all as specified and directed by Engr-in-charge .Make-classic/Shalimar. | 20 | Each | |
131 | 117 | S&F aluminium anodized barrel tower bolt extruded section and fixed 150mm long,complete all as specified and directed by Engr-in-charge. | 59 | Each | |
132 | 118 | S&F extruded aluminium alloy handles 100mm fabricated type, anodised ,complete all as specified and directed by Engr-in-charge. | 29.5 | Each | |
133 | 119 | S&F but hinges stainless steel 100mm long heavy weight ,complete all as specified and directed by Engr-in-charge. | 293.1 | Each | |
134 | 120 | S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate ,complete all as specified and directed by Engr-in-charge. | 13 | Each | |
135 | 121 | S&Fin repair mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate ,complete all as specified and directed by Engr-in-charge.. | 29 | Each | |
136 | 122 | M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc ,complete all as specified and directed by Engr-in-charge.. | 239.596 | Sqm | |
137 | 123 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples ,complete all as specified and directed by Engr-in-charge.. | 50 | Sqm | |
138 | 124 | S&F in repair stainless steel wire mesh of 0.36mm dia of wire and average width of aperture 1.40mm & fixed with tinted tacks of galvanised over staples ,complete all as specified and directed by Engr-in-charge. | 150 | Sqm | |
139 | 125 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm ,complete all as specified and directed by Engr-in-charge. | 50 | Sqm | |
140 | 126 | S&F sheet glass ordinary quality 4.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane ,complete all as specified and directed by Engr-in-charge.. | 40 | Sqm | |
141 | 127 | S&F figured glass, pin-head type 4.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane ,complete all as specified and directed by Engr-in-charge. | 10 | Sqm | |
142 | 128 | S&F floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor with overall length of cover plate 140mm ,complete all as specified and directed by Engr-in-charge.. | 30 | Each | |
143 | 129 | M&L for medium density fibre (MDF) board 18mm , exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work ,complete all as specified and directed by Engr-in-charge. | 39 | Sqm | |
144 | 130 | M&L for medium density fibre (MDF) board 12mm exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work ,complete all as specified and directed by Engr-in-charge. | 14 | Sqm | |
145 | 131 | S&F magnetic catches MS body and striking plate with aproved quality ,complete all as specified and directed by Engr-in-charge. | 30 | Each | |
146 | 132 | S&F in repair continuous (Piano) hinges, Stainless steel bright finish or electrogalvanised width of flaps (when open) in 40mm ,complete all as specified and directed by Engr-in-charge. | 50 | RM | |
147 | 133 | S&F Stainless steel soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board ,complete all as specified and directed by Engr-in-charge. | 5 | Each | |
148 | 134 | S&F 100mm Aluminium handle,cast type, anodised ,complete all as specified and directed by Engr-in-charge. | 50 | Each | |
149 | 135 | M & L for Extra over rates of block board or veneered particle board for 12 mm thick for external teak wood lipping, 6mm thick fixed with nails ,complete all as specified and directed by Engr-in-charge. | 65 | RM | |
150 | 136 | M&L powder coated aluminium Door/ window/ sliding window / Ventilator / partition frames and shutters using standard aluminium powder coated sections including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws, anodised aluminium fittings suitable Nylon gasket, nylon rollers, maruthi locks, handles, concealed star lock, aluminium F channel for fixing aluminium grill and all necessary fittings and fixtures etc all as specified and complete of as per standard sections and fixing to cudappa stone/granite stone with necessary bolts/screws ,complete all as specified and directed by Engr-in-charge. | 300 | Kg | |
151 | 137 | S&F aluminium anodized grill of 4.75 x 7.75 mm, size of opening 10cm, size of mesh RG 103 (as per royal grill) with aluminium channel `F' angle 20mmx15mm fixed to aluminium frame ,complete all as specified and directed by Engr-in-charge. | 40 | Sqm | |
152 | 138 | S&F in repairs aluminium door closer hydraulically regulated, designation No. 3 universal type ,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg,complete all as specified and directed by Engr-in-charge. | 5 | Each | |
153 | 139 | S & F in repairs Double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door shutters including making cavities on floor for embedding the floor door springs flush with floor and making good disturbed area ,complete all as specified and directed by Engr-in-charge. | 4 | Each | |
154 | 140 | M&L for 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane ,complete all as specified and directed by Engr-in-charge. | 30 | Sqm | |
155 | 141 | M&L machine cut cudappa stone slab 15-20mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over 10mm thick in CM 1:3 as backing coat to receive cudappa stone slab , complete all as specified and directed by Engr-in-charge. | 35 | Sqm | |
156 | 142 | M&L machine cut cudappa stone slab 30-40mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over 10mm thick in CM 1:3 as backing coat to receive cudappa stone slab , complete all as specified and directed by Engr-in-charge. | 9 | Sqm | |
157 | 143 | S&F stainless steel kitchen Rack suitable for housing 10 plate of size 30''x 30''x10'' , complete all as specified and directed by Engr-in-charge. | 4 | Each | |
158 | 144 | S& F in repair, 25 mm matt finish Stainless steel curtain rod best quality , complete all as specified and directed by Engr-in-charge. | 200 | RM | |
159 | 145 | S& F in repair , Stainless steel socket bracket with bore of 25mm for dead end of curtain rod , complete all as specified and directed by Engr-in-charge. | 96 | Each | |
160 | 146 | S& F in repair , Stainless steel ornamental piece with bore dia of 25 mm for free end of curtain rod, complete all as specified and directed by Engr-in-charge. | 190 | Each | |
161 | 147 | S& F in repair , Stainless steel projecting bracket to support curtain rod of size 25mm , complete all as specified and directed by Engr-in-charge. | 208 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail