}

Special Repair Of Roof Sheets , Flooring Of Ground First Floor , Doors , Window And Plumbing Items Of Bathroom Of Bldg No . T-02 Has Been Damaged Under Ge ( South ) Mamun At Mamun Mil Station, GE SOUTH MAMUN-Punjab

Military Engineer Services-MES has published Special Repair Of Roof Sheets , Flooring Of Ground First Floor , Doors , Window And Plumbing Items Of Bathroom Of Bldg No . T-02 Has Been Damaged Under Ge ( South ) Mamun At Mamun Mil Station. Submission Date for this Tender is 05-11-2020. Shed Construction Tenders in GE SOUTH MAMUN Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

25689476
Special Repair Of Roof Sheets , Flooring Of Ground First Floor , Doors , Window And Plumbing Items Of Bathroom Of Bldg No . T-02 Has Been Damaged Under Ge ( South ) Mamun At Mamun Mil Station
Open Tender
Indian
Punjab
GE SOUTH MAMUN
05-11-2020

Tender Details

Special Repair Of Roof Sheets , Flooring Of Ground First Floor , Doors , Window And Plumbing Items Of Bathroom Of Bldg No . T-02 Has Been Damaged Under Ge ( South ) Mamun At Mamun Mil Station

Key Value

Document Fees
INR 1000 /-
EMD
INR 96000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work : SPECIAL REPAIR OF ROOF SHEETS, FLOORING OF GROUND FIRST FLOOR, DOORS, WINDOW AND PLUMBING ITEMS OF BATHROOM OF BLDG NO. T-02 HAS BEEN DAMAGED UNDER GE (SOUTH) MAMUN AT MAMUN MIL STATION (Job No SHM/05/SRB/2020-21)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Taking down chowkhats or frames of any description not exc 1.50 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware , complete all as specified and directed. 58 Each
2 2 Taking down chowkhats or frames of any description exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed. 30 Each
3 3 M&L for pressed steel frames 125mmx60mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface complete all as specified and directed. 80 RM
4 4 M&L for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faceS ,The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkhats incl 02 coats of synthetic enamel paint over a coat of pink primer after preparation of surfaces complete all as specified and directed. 27 Sqm
5 5 M&L for 35mm thick glazed and skeleton shutters (Factory made) of 2nd class hard wood and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 2009 (Larger size to be provided) incl 02 coats of synthetic enamel paint over a coat of pink primer after preparation of surfaces complete all as specified and directed. 27 Sqm
6 6 M & L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain pre-painted PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.\n 132 RM
7 7 S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. 36.5 Sqm
8 8 M&L for Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 68 Sqm
9 9 S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, orstainless steel wire staples complete all as specified and directed. 62 Sqm
10 10 M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads/glazing pins not. Exc 0.5 Sqm in each pane complete all as specified and directed 39 Sqm
11 11 M&L for 3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each panecomplete all as specified and directed. 4 Sqm
12 12 M&L for stainless steel Butt hinges of size 100 mm fixed with steel screws of appropriate size complete all as specified and directed. 84 Each
13 13 M&L for 250mm aluminium sliding door bolt with hasp & staple (bolt type) and fixing clip of sheets cast or extruded section and fixing sliding bolt of extruded section etc complete all as specified and directed. 20 Each
14 14 M&L for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed. complete all as specified and directed. 64 Each
15 15 M&L for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed. complete all as specified and directed. 56 Each
16 16 M&L for Aluminium anodised handle, extruded section of size 150mm etc complete all as specified and directed. 120 Each
17 17 M&L for 300 mm MS Rat tail door spring for door closer, complete all as specified and directed. 16 Each
18 18 S&F in repair for 20mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC brackets of approved design/pattern, funnels etc suitable for single curtain rod complete all as specified and directed. 130 RM
19 19 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc and removal of rubbish out off the premises complete all as specified and directed. 2.86 Cum
20 20 M&L for Brick work with Fly Ash Brick (Non-Modular) Class 7.5, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed. 2.86 Cum
21 21 Complete removal of existing treatment & preparation of plastered surface of walls applying two coats of cement base paint over a coat of alkali resistent priming paint as per manufacturer instructions complete all as specified and directed. 100 Sqm
22 22 M&L for preparation of new plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistence primer as per manufacturer instructions including curing complete all as specified and directed. 650 Sqm
23 23 M&L for preparation of new plastered surfaces of wall and apply three coats of white wash on plastered surfaces complete all as specified and directed. 450 Sqm
24 24 S&F in repair 15mm bore Stop valves fancy type, chromium plated cast copper alloy long shank and exposed part kit with fitting sleeve, operarting lever & adjustable wall flange (concealed type) screwed both ends for iron pipe or for unions complete all as specified and directed. \nMake : Jaquar Cat part No CON-083FT & CON-083FTK or equivalent of Hindware/Marc. 8 Each
25 25 S&F in repair for single towel rail brass chromium plated 600mm long fixed with chromium plated screw and PVC cleat complete all as specified and directed.\nMake : Cat part No AQN-7711 of Jaquar or equivalent model in Hindware/Marc. 8 Each
26 26 S&F in repair for 600mm x450mm looking mirror of selected quality 5mm thick glass with PVC frame fixed with chromium plated brass screws & cup whashers with PVC beading complete all as specified and directed. 8 Each
27 27 M&L for Vitreous china wash hand basin, white, flat back, size 550x400mm (Make : Jaquar Cat part No CNS-WHT-801 or equivalent model in Hindware/Parryware/Somany) including 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated (Make : Jaquar Cat part No FLR-5011N or equivalent model in Hindware/Marc.) brackets, CP waste coupling, 32mm bore PVC waste pipe of min 600mm long & 15 mm bore PVC connections, including cutting for and pinning in end of brackets or erecting stand fixed in repairs complete all as specified and directed. 8 Each Job
28 28 S&F in repair for 15mm bore bib taps fancy type with wall flange, chromium plated cast copper alloy long body with capstan heads, screwed for iron pipe or brass ferrule complete all as specified and directed.\n 32 Each
29 29 Taking up or down 15mm bore pipe and connections complete all as specified & as directed. 130 RM
30 30 Taking up or down 20mm bore pipe and connections complete all as specified & as directed. 110 RM
31 31 M&L for GI water tubing surface/concealed, 15mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, complete all as specified and directed.\n(Note : Cutting chases and making good shall be measured and paid separately) 130 RM
32 32 M&L for GI water tubing surface/concealed, 20mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, including taking down existing unserviceable GI tubing and connections complete all as specified and directed.\n(Note : Cutting chases and making good shall be measured and paid separately) 110 RM
33 33 S&F 15 mm bore Stop valves/Angle valve with flange cast copper alloy, chromium plated (ISI marked) , screwed down,high pressure, with capstan handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed. \n 40 Each
34 34 Taking down cement plaster on brick or stone walls,etc including racking out joints , hacjking for keys,scrubing down with water etc, and removal of rubbish out off the permises complete all as specified. 2080 Sqm
35 35 M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM (1:6) on wall surfaces finished even and smooth without using extra cement complete all as specified & directed. 980 Sqm
36 36 M&L for rendering 5mm thick on brick work or concrete surface in CM (1:3) on ceiling/chhajja surfaces finished even and smooth without using extra cement complete all as specified & directed.\n[Note : WPC shall be measured and paid seperately under respective item.] 450 Sqm
37 37 M&L for Rendering 15mm thick in two layers [base layer 10mm IN CM 1:6 & finishing layer 5mm thick in cement mortar (1:4)] using liquid water proofing compound in IInd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement including taking down cement or cement lime plaster of any description and raking out joints, hacking for key, scrubbing down with water and removal of rubbish, out off the premises, etc complete all as specified & directed.\n(Note : WPC shall be measured and paid separately) 650 Sqm
38 38 M&L for preparation of newly plastered surfaces of wall & applying two coats of distemper oil emulsion (OBD) over a coat of primer as per manufacturer instructions (from same manufacturer of OBD) over and including a layer of wall care putty 2mm thick complete all as specified and directed. 980 Sqm
39 39 M&L for preparation of old plastered surfaces of wall & applying two coats of distemper oil emulsion (OBD) over a coat of primer as per manufacturer instructions (from same manufacturer of OBD) over and including a layer of wall care putty 2mm thick by washing, rubbing, stoping, brooming down with steel wire brushing scraping down smoke roots, moulds salts and trading oil greasy spots complete all as specified and directed. 280 Sqm
40 40 M&L two coats of white wash on surface of wall including preparation of old plastered surface by washing rubbing, stopping brooming down with steel wire brushing scrapping down smoke roots, moulds salts and trading oil and greasy spots complete all as specified and directed. 100 Sqm
41 41 M&L for 60mm thick factory made rubberised coloured (laminated) interlocking paver block (using vibro compaction method) (topping thickness not less than 5mm) in white cement and non fadable glossy pigment of approved shade of any shape and size conforming to IS-15658-2006 of M-35 grade laid over & including cleaned dry sand cushion 50mm thick over and including 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) including demolition of damaged cement concrete of any type or description and removal of debris out off the premises etc complete all as specified and directed. 360 Sqm
42 42 M&L for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in panels and joints filled with mix of bitumen 85/25 grade and sand (1:2) by weight, finished the surface even and smooth using extra cement etc complete all as specified and directed. 64 Sqm
43 43 M&L for PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in kerbs of interlocking/chequred tiles complete all as specified and directed. 1 Cum
44 44 M&L for Non-skid ceramic coloured rectified edges tiles (joint free) 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and directed 132 Sqm
45 45 M&L for Non-skid ceramic coloured rectified edges tiles (joint free) 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and directed 910 Sqm
46 46 M&L for Glazed ceramic (coloured) tiles 7mm thick, of size 450mmx300mm on vertical surfaces such as dado etc, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match tiles over and including 10mm thick backing coat in cement mortar (1:4), surface finished even and rough to receive tiles, including dismantling existing tiles of any type and pattern including cement mortar backing coat and removal of rubbish out off the premises complete all as specified and directed. 370 Sqm
47 47 M&L for Marble Green/Bhaislana Zebra 12 to 15mm thick (table rubbed and premirror polished) in single piece in steps, jambs, pillars, window-cills, and like set and jointed in neat cement slurry including pointing in epoxy grout to match marble shade, including making hole for gas pipe including rounding the edges of marble stone , laid over and including 15mm thick screed bed in CM 1:4 including dismantling of existing tiles/stone etc complete all as specified and directed. 42 Sqm
48 48 S&F in repair Brass Chromium Plated shower rose with arms fancy type with swivel joints 75 mm face dia of appoved make and cat part for 15mm bore iron pipes complete all as specified and directed.\nMake : Prayag Cat part No BS-73 or equivalent model in Hindware/Marc. 8 Each
49 49 S&F in repair for Vitreous china white wash down water closet pan (pedestal pattern) with normal closing seat cover S-trap (Make : Jaquar Cat part No CNS-WHT-553SN or equivalent Cat Part/Model of Hindware/Parryware/Somany) & hand shower (Heath foucet) 8mm dia 1.5m long flex tube in chrome finish and wall hook with NRV (Back flow preventer) and connection to drain (or out going pipe) (Make : Jaquar Cat Part No ALD-577 or equivalent Cat Part/Model of Hidware/Parryware) and to flush pipe, antisyphonic pipe etc complete all as specified and directed 16 Each Job
50 50 S&F in repair for PVC flushing cistern dual flush type 10 Ltr capacity, valve-less syphonic action type, low level, complete with inlet, ball valve, handle, including brackets/pins, PVC flush pipe 32mm dia for suitable length including making necessary connection to water supply pipe line and jointly to WC complete all as specified and directed. 16 Each
51 51 S&F in repair for PVC connection 15mm size with PTMT nuts of length 450mm long of appoved make complete all as specified and directed. 28 Each
52 52 S&F in repair for Rotational moulded polyethylene water storage tanks three layer of capacity 1000 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and dismantling of existing PVC tank of any capacity, complete all as specified & directed. 4 Job
53 53 S&F in repair 20mm bore gun metal gate valve, with cast iron wheel head, screwed both ends for GI pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butterfly screwed down for GI pipe 20 mm dia complete all as specified and directed. 8 Each
54 54 S&F in repairs PVC (SWR) gully trap 125/110mm with grating including jointing to waste pipe with solvent cement and fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed 8 Each Job
55 55 M&L for PVC (SWR) rain water pipes of 110mm dia type 'B' in any length, with rubber ring joints fixed to wall including taking down existing SWR pipes complete all as specified and directed 20 RM
56 56 M&L for PVC (SWR) rain water pipe of 75mm dia type 'B' in any length, with rubber ring joints, laid in trenches or as in floor including taking down existing SWR pipes etc incl earthwork if required complete all as specified and directed 16 RM
57 57 S&F in repair for PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed 16 Each
58 58 S&F 110mm bore bends PVC (SWR) (any radius) fixed with cement solvent etc complete all as specified and directed 16 Each
59 59 S&F 75mm bore bends PVC (SWR) (any radius) fixed with cement solvent etc, complete all as specified and directed 16 Each
60 60 S&F 110mm PVC (SWR) mm vent cowls complete all as specified and directed 8 Each
61 61 M&L 110mm PVC (SWR) junction double, (double T) equal or unequal jointed with solvent cement complete all as specified and directed 8 Each
62 62 S&F stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia CI pipe 48 Each
63 63 M&L 150mm dia PVC (SWR) type "B' pipes single socketed in any length with rubber ring joints, laid in trenches or floors as waste pipes jointed with solvent cement incl dismantling of existing pipe complete all as specified and directed 80 RM
64 64 M&L for 25 thick PCC (1:2:4) type B-0 using (12.5 mm graded crushed stone aggregate) as leveling course/padding using water proofing compound laid over existing roof, surface finished rough to receive cement mortar including necessary formwork including demolition of existing concrete of any description and removal of debris out off the premises complete all as specified and directed.\nNote : (WPC shall measured and paid separately) 60 Sqm
65 65 M&L for cement concrete bed (1:4:8 type D2) to 150mm dia pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed 76 RM
66 66 M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification complete all as directed :-\n(a) Cleaning existing surface properly.\n(b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufactured by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface.\n(c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane, Physical property of membrane shall be as under :-\n (i) Membrane weight not less than 3.60 Kg/Sqm.\n (ii) Non woven polyester weight not less than 160 gsm/Sqm.\n (iii) Softening point of membrane not less than 150 degree Celsius.\n (iv) Joint tensile strength-longitudinal not less than 650/Sqcm and transverse not less than 450/sqcm at 230 degree Celsius.\n (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N.\n (vi) Elongation of reinforcement not less than 30%.\n (vii) Impermeability under water pressure not less than 3 Kg/Sqcm.\n(d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.\n(e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane. 60 Sqm
67 67 M&L for 10mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr.Fixit or STP as per manufacturer instruction @ 0.200 Ltr in 50 kg of cement, complete all as specified and directed. 60 Sqm
68 68 M&L for preparation of old painted steel surfaces of any description over 10 cm in width or girth & applying one coats of synthetic enamel paint of approved shade otherwise described complete all as specified and directed. 60 Sqm
69 69 M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing sheets of any type and description complete all as specified and directed\n[Note : The colour of sheet shall be as approved by GE]. 680 Sqm
70 70 M&L for Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick and 450mm width of an ecofriendly colour having tensile strength of 550 Mpa as in ridge/vally fixed with self tapping screws including dismantling of existing sheets of any type and description complete all as specified and directed\n[Note : The colour of sheet shall be as approved by GE]. 30 Sqm
71 71 M&L for Flase ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & matalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders/Hangers 4mm dia G.I wire (upto 1200mm length) adjusting level fixed to roof slabes/trusses complete all as specified standard galvanised sections in a grid size of 600X600mm including taking down existing ceiling board & grid work etc of any type/pattern complete 330 Sqm
72 72 Supply only Polymer liquid water proofing compound of make Pidilite/Bauchemic/Fosrock, all as specified and directed. 22 Ltr
73 73 Taking down carefully unserviciable/ damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc ) and removing material from site and making good to the disturbed surface to match with existing finish complete all as specified and directed. 304 Per \npoint
74 74 M&L for Modular Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box and approved make sunken modular metal flush gang box and suitable support frame and cover plate (inner/outer) of required modules for mounting modular switches/ sockets etc, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for one light/fan/bell point complete all as specified and directed.\n(Note : Modular switch/bell push/fan regulator etc shall be measured and paid separately under respective items.) 198 Per \npoint
75 75 All as per Srl item No. 74 above but for one light point controlled by two way switch, single pole, 5 Amp, 240 volts etc complete all as specified and directed. 2 Per \npoint
76 76 All as per Srl item No. 74 above but for one multipin socket (5 pin) controlled by one switch, single pole, 5 Amp, 240 volts on the same board etc complete all as specified and directed. 32 Per \npoint
77 77 All as per Srl item No. 74 above but for one multipin socket (5 pin) controlled by one switch, single pole, 5 Amp, 240 volts on independent board etc complete all as specified and directed. 40 Per \npoint
78 78 M&L for Modular point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 2.5 sqmm including 2.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box and approved make sunken metal flush gang box and suitable support frame and cover plate (inner/outer) of required modules for mounting modular switches/ sockets etc, for one 6 pin socket outlet 15 amps, Modular multi purpose independent point controlled by 15 Amp switch Single pole , one way , 240 volts l connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan/bell point complete all as specified and directed.\nMake of cable : Finolex, Anchor, Polycab\n(Note : Modular switch/bell push/fan regulator etc shall be measured and paid separately under respective items.) 32 Per \npoint
79 79 M&L for Sub main wiring with FRLS PVC insulated unsheathed 2X6 sqmm multistranded copper conductor cable 1100 V with 1X6 sqmm FRLS PVC insulated green multistranded copper cable for continuous earth drawn through & including concealed PVC conduit of appropriate size not less than 20 mm dia & 1.8mm wall thickness with all accessories including cutting grooves and making good disturbed surface to match existing including taking down existing surface sub main wiring complete all as specified and directed. \n(Note: Two runs of FRLS PVC cable with one run of earth conductor and conduit shall be measured as one RM.) 200 RM
80 80 S & F modular switch piano type flush button one way, single pole 5 Amp one module complete all as specified and directed. \nMake : Legrand Cat Part No 673000/Crabtree Cat Part No ACMSXXW101/Anchor Roma Cat Part No 66111.\n 270 Each
81 81 S&F Modular Socket outlet, 5 pin, multi purpose 2 module 6 Amps, AC 230 volts, etc complete all as specified and directed. \nMake : Crabtree (Verona) Cat Part No : ACVKSWW065 or equivalent of Legrand/Siemens/Schenider/Anchor Roma. 72 Each
82 82 S&F modular switch Socket outlet, 2 in 1, 6 pin, 2 module 5/15 Amps, flush type (ISI Marked ) AC 230 volts, complete all as specified and directed. \nMake : Crabtree /Legrand / Schneider /Siemens/Anchor Roma 32 Each
83 83 S&F modular Switch piono flush button single pole one way 16 Amp (ISI Marked ) AC 230 volts, etc complete all as specified and directed. \nMake : Crabtree /Legrand / Schneider /Siemens/Anchor Roma 32 Each
84 84 S&F Ceiling rose polycarbonate isolated body surface Bakelite, not less than 65 x 50 mm, three terminals, AC 230 volts etc, complete all as specified and directed. \nMake : Havells Cat Part No Reo/Cona Cat Part No 9246/GM Cat Part No 8224\n 90 Each
85 85 S&F modular switch flush button, single pole, two way, 5 Amp (ISI Marked) complete all as specified and directed by Engr-in-Charge.\nMake : Crabtree /Legrand / Schneider /Siemens/Anchor Roma 4 Each
86 86 S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as specified and directed. \nMake : Legrand Cat Part No 673028/Crabtree Cat Part No ACARFHW005/Anchor Roma Cat Part No 66502.\n 32 Each
87 87 S&F Lamp holder insulated body with back plate suitable for batten fitting including 12W LED lamp of approved make and cat part and PVC Round/Square block etc complete all as specifeid and directed.\n 60 Each
88 88 S &F in replacement the Bulk head light fitting LED type 10 watt complete with 10 watt LED and having IP-63 protection and fixing on wall/ceiling complete with all accessories and including connecting up with ceiling rose with & including PVC insulated and overall sheathed flexible copper conductor cable and including 3 core 0.50 Sqmm complete all as specified and directed.\n\n 4 Each
89 89 S&F for Surface mounted 1x20 watt LED tube light fittings (4 feet long), prewired, decorative luminaire with inbuilt LED tube rod and acrylic cover with all accessories and making connection using 3 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed 82 Each
90 90 S&F for Surface mounted 1x10 watt LED mirror light fittings, prewired, decorative luminarire with inbuilt LED tube rod and acrylic cover with all accessories and making connection using 3 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed 8 Each
91 91 Supply and fixing building security light luminaire 25W LED 5000 K AC 230 volts, new generation saving & environmental friendly long life Versatile pressure die cast aluminium luminaries with high power LED as light source complete making connection with street light/building security light box or OH line using PVC insulted and sheathed single core multi slandered copper conductor cable of size 1.5 Sqmm including suitable size of bracket and light grade pipe for muntaining of fitting all as specified and directed by Engr-in-Charge.\nNotes : for Sl item Nos 87 to 91 :-\n1. Driver shall be potted antivibration type.\n2. LM-79 and LM-80 test report with 50,000/ burning hours LED life from NABL lab shall be povided.\n3. CRI (Colou Rendring Index) of fixture shall be > 70.\n4. CCT (Colout Correlated Temprature of fixture shall be 5700K ± 300 K.\n5. System Lumen Efficacy shall be > 100Lm/W\n6. 10 KV separate Surge Protection shall be provided as a part of fitting.\n7. 5 years gurantee shall be provided by contractor suppoted by OEM covering all parts of luminaire. \n8. Lenses shall be Modular Type. \n9. PCB used shall be MC PCB type \n10. The defect liability period of LED light shall be 05 years from the certified date of completion & the Contractor shall replace / repair the defective fitting within 07 Days after handing over to Contractor for replacement / repair 11. CA No shall be written on each fitting before installation.\n12. The name of manufacturer to be embossed on the fitting.\n13. The fittings shall have arrangement so that maintaince required, if any can be carried out from Top cover.\n\n 4 Each
92 92 S&F for MCB single pole (SP) 240 volts, 6 to 32 Amps, 10KA (C-series) complete all as specified and directed.\nMake : Legrand/Schneider/Hager \n 24 Each
93 93 S&F for MCB single pole neutral (SPN) 240 volts, 50 Hz 40 to 63 Amps, 10KA (C-series) complete all as specified and directed.\nMake : Legrand/Schneider/Hager \n 4 Each
94 94 Supply , laying, testing and commissioning for 1100 volt grade XLPE insulated heavy duty cable, 25 sqmm 4 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches including taking down existing cable & bricks complete all as specified and directed.\nNote : Excavation & Earthwork shall be measured and paid separately. 112 RM
95 95 M & L for well burnt bricks , laid flat ( old size) sub class B designation 75 for cable protection complete all as specifed and directed. 0.627 per 1000 Nos
96 96 Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc (for cable, pole stay manhole etc), in any type of soil and getting out, complete all as specified and directed. 18 Cum
97 97 Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25cm thick, etc complete all as specified and directed. 10 Cum
98 98 Removing excavation material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point etc complete all as specified and directed. 8 Cum
99 99 M&L for Sand filling in trenches dry and clean sand unwashed including punning around cable for protection of under ground cable duly compected and rammed with a layer of sand of 8 cm depth for the purpose of cushioning.and after laying cable the same shall be covered with sand to a depth of 15 cm (with overall 23cm of depth of sand cushioning punned down to 18cm) complete all as specified & directed.\nNote : Punned thickness shall be measured and paid accordingly] 6 Cum
100 100 S&F for GI tubing 40 mm bore light grade laid in trenches/floors/ fixed to wall/poles for protection of cable with necessary fittings and FI clamps duly painted complete all as specified and directed. \n 12 RM
101 101 S&F distribution board iron clad, double door with IP-43 protection suitable for MCCB as incomer and MCB as outgoing 415 volts 3 Phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link confirming to cat Pt No 607770 of Legrand or equivalent of make L&T/Merlin Gerin multi-9 complete with one MCCB 3 pole 415 Volts 100 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the distributed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measure separately) 1 Each
102 102 S&F sheet metal enclosure SPN 240 Volts with a two pin and earth plug and socket with and including one single pole MCB of 20 Amps. 240 Volts fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed 4 Each
103 103 S&F sheet metal enclosure MCB distribution board Double door single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 607712 of Legrand or equivalent of make Hager/L&T fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification 4 Each
104 104 Supply and Install the electric water heater storage type 25 Ltr capacity 5 Star rated of vertical type glass lined of inner tank and heating element of 2kW and having the wall mounting arrangement, thermostate, indicators and thermally insulated stainless steel tank of glass lined inside the tank and heating element, PVC connection pipe with complete connection of water & testing and all as specified and directed. Make : Havells Monza DX or equivalent model in Crompton, Racold 4 Each
105 105 Taking down ceiling/exhaust fan of any sweep & size and refix in same position after overhauling including minor repairs by replacement of capacitor, safety pin, cap, nuts & bolts etc and making connection using 3 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning including application of one coat of synthetic enamel paint by spray painting & rewriting number complete all as specified and directed 8 Each
106 106 M&L for earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, HDPE pipe 15mm bore as protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed.\nNotes: \n1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in unit rate quoted by the contractor.\n2. Earth filling shall be done by vegitable soil.\n3. Soil shall be free from stone, boulders, aggregate, gravels . 1 Each Set
107 107 Taking down ceiling fan of any sweep & size and refix in same position after overhauling including minor repairs by replacement of capacitor, safety pin, cap, nuts & bolts etc and making connection using 3 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning including application of one coat of synthetic enamel paint by spray painting & rewriting number complete all as specified and directed. 32 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail