}

Work Of Civil Maintenance And Upkeep Of 02 Nos . Multistory Tower ( 01 No . Type-Iii Tower ( 40 Residence ) And 01 No Type-Iv Tower ( 40 No . Residence ) ( Block A ) Work Of Civil Maintenance And Upkeep Of 02 Nos . Multistory Tower ( 01 No . , SUPERINTENDING ENGINEER, ECCC, 1X660MW-Uttar Pradesh

Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited-UPRVUNL has published Work Of Civil Maintenance And Upkeep Of 02 Nos . Multistory Tower ( 01 No . Type-Iii Tower ( 40 Residence ) And 01 No Type-Iv Tower ( 40 No . Residence ) ( Block A ) Work Of Civil Maintenance And Upkeep Of 02 Nos . Multistory Tower ( 01 No . . Submission Date for this Tender is 27-02-2021. Transmission Tower Tenders in SUPERINTENDING ENGINEER, ECCC, 1X660MW Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

25676400
Corrigendum : Work Of Civil Maintenance And Upkeep Of 02 Nos . Multistory Tower ( 01 No . Type-Iii Tower ( 40 Residence ) And 01 No Type-Iv Tower ( 40 No . Residence ) ( Block A ) Work Of Civil Maintenance And Upkeep Of 02 Nos . Multistory Tower ( 01 No .
Open Tender
Indian
Uttar Pradesh
SUPERINTENDING ENGINEER, ECCC, 1X660MW
27-02-2021

Tender Details

Work Of Civil Maintenance And Upkeep Of 02 Nos . Multistory Tower ( 01 No . Type-Iii Tower ( 40 Residence ) And 01 No Type-Iv Tower ( 40 No . Residence ) ( Block A ) Work Of Civil Maintenance And Upkeep Of 02 Nos . Multistory Tower ( 01 No . Type-Iii Tower ( 40 Residence ) And 01 No Type-Iv Tower ( 40 No . Residence ) ( Block A )

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 26-Nov-2020 Date Extended2 Date 08-12-2020
2 22-Dec-2020 Date Extended 4 Date 05-01-2021
3 06-Jan-2021 Date Extended 5 Date 21-01-2021
4 22-Jan-2021 Corrigendum for date extension Date 04-02-2021
5 05-Feb-2021 DATE EXTENDED Date 15-02-2021
6 16-Feb-2021 DATE EXTENDED 10 Date 27-02-2021

Key Value

Document Fees
INR 755 /-
EMD
INR 12800.0 /-
Tender Value
INR 6.40 Lakhs /-

BOQ Items

Name of Work: Work of Civil Maintenance & upkeep of 02 Nos. Multistory Tower (01 no. Type-III Tower (40 residence) & 01 no Type-IV Tower (40 No. residence) (Block ‘A’)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Upkeep of water supply operation, sanitary upkeep, i.e/ attending leakage if any by providing 01 no. skilled labour for 01 no. Type-III Tower (40 residence) & 01 no Type-IV Tower (40 No. residence) including all work required for proper completion of work excluding cost of material. Item 01 365 Days
2 2 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR No. 2.31) Item 02 20 Sqm
3 3 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) (DSR No. 14.1.2) Item 03 20 Sqm
4 4 Providing and laying vitrified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. (DSR No. 11.40) (Make : Nitco Bach No. 35191101) Crust 06 Item 04 3 Sqm
5 5 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (DSR No. 8.31) (Make: Nitco Viola White, teea nero, LT, decor, mistybrown, LT, decor 3X450) Item 05 2 Sqm
6 6 Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm. (DSR No. 16.86.1) Item 06 2 Sqm
7 7 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm (DSR No. 11.41.3) (Make: Nitco Misti quality vitrified) Item 07 5 Sqm
8 8 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick (DSR No. 11.26.1) Item 08 2 Sqm
9 9 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (Off white-300) (DSR No. 13.48.2) Item 09 5 Sqm
10 10 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work (DSR No. 13.52.1) Item 10 2 Sqm
11 11 Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete. (DSR No. 9.149) Item 11 5 Nos.
12 12 Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete (DSR No. 9.151) Item 12 5 Nos.
13 13 Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. (DSR No. 9.152) Item 13 5 Nos.
14 14 Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete. (DSR No. 9.153) Item 14 5 Nos.
15 15 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia (DSR No. 17.28.1.1) Item 15 10 Each
16 16 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia (DSR No. 17.28.1.2) Item 16 10 Each
17 17 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR No. 17.31) Item 17 5 Each
18 18 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter (DSR No. 12.41.1) Item 18 5 Mtr
19 19 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter (DSR No. 12.41.2) Item 19 5 Mtr
20 20 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 75 mm (DSR No. 12.42.1.1) Item 20 5 Nos.
21 21 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (DSR No. 18.9) Item 21
22 21.01 15 mm nominal outer dia Pipes (DSR No. 18.9.1) Item 22 5 Mtr
23 21.02 20 mm nominal outer dia Pipes (DSR No. 18.9.2) Item 23 5 Mtr
24 21.03 25 mm nominal outer dia Pipes (DSR No. 18.9.3) Item 24 5 Mtr
25 21.04 32 mm nominal outer dia Pipes (DSR No. 18.9.4) Item 25 5 Mtr
26 21.05 40 mm nominal outer dia Pipes (DSR No. 18.9.5) Item 26 5 Mtr
27 22 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (make Cera-F2002151) (DSR No. 18.49.1) Item 27 5 Nos.
28 23 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore (make Cera-F2002152) (DSR No. 18.50.1) Item 28 5 Nos.
29 24 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore (make Cera-F2002201) (DSR No. 18.53.1) Item 29 10 Nos.
30 25 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (DSR No. 9.96) Item 30
31 25.01 300x16 mm (DSR No. 9.96.1) Item 31 5 Nos.
32 25.02 250x16 mm (DSR No. 9.96.2) Item 32 5 Nos.
33 26 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (DSR No. 9.97) Item 33
34 26.01 200x10 mm (DSR No. 9.97.3) Item 34 5 Nos.
35 26.02 150x10 mm (DSR No. 9.97.4) Item 35 5 Nos.
36 27 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm: (DSR No. 9.100.1) Item 36 2 Nos.
37 28 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper (DSR No. 9.101.1) Item 37 6 Nos.
38 29 Cleaning of water storage tank removal of silt, rubbish from tank cleaning with fresh water disinfecting with bleaching powder. (NSR) Item 38 24 Job
39 30 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) (DSR No. 4.1.8) Item 39 3 Cum
40 31 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (DSR No. 5.22A.6) Item 40 20 Kg.
41 32 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube (DSR No. 10.26.1) Item 41 10 Kg.
42 33 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR No. 6.4.2) Item 42 5 Cum
43 34 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) (DSR No. 6.13.2) Item 43 3 Sqm
44 35 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decortive type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR No. 9.20.1) Item 44 2.1 Sqm
45 36 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). (DSR No. 13.11) Item 45 5 Sqm
46 37 Neat cement punning. (DSR No. 13.18) Item 46 2 Sqm
47 38 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer (Cool cream-040) (DSR No. 13.41.1) Item 47 10 Sqm
48 39 Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (DSR No. 13.111.1) Item 48 10 Sqm
49 40 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR No. 13.80) Item 49 8 Sqm
50 41 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (Make Cera Seat cover code Carina (2308) Seat EWC calibre WH (DSR No. 17.3.1) Item 50 3 Each
51 42 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap (Make Cera code F2002103) (DSR No. 17.7.7) Item 51 2 Each
52 43 Providing and Fixing of C.P. brass over head shower with shower arm Make: Cera, Model: F72020302) (as per old contract) armcode - F7040102 Item 52 3 Nos.
53 44 Providing and Fixing of CP brass wall mixture with / without provision for telephonic shower Make: Cera, Model: F2002401 (As per old contract) Hand shower -F7030301 Item 53 2 Nos.
54 45 Providing, Fixing & testing 15 mm dia. C.P.Brass Single hole wash basin mixer with all accessories in wash basins. (Jaquar 167 or equivalent), Complete in all respect. (As per old contract) Cera-F2002461) Item 54 2 Nos.
55 46 Providing, Fixing & testing Sink Mixer with Swining casted spout( wall Mounted) with all accessories in wash basins. (Jaquar 309) or equivalent), Complete in all respect. (Make Cera F2002511) (As per old contract) Item 55 2 Nos.
56 47 Providing C.P. Brass health faucet for ablution with 1 meter long PVC tube, hand shower, couplings, wall hook and other accessories. (Jaquar ALD 573 or equivalent) (Make: Cera F8030101) (As per old contract) Item 56 5 Nos.
57 48 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (DSR No. 12.42) Item 57
58 48.01 Single tee with door 110x110x110 mm (DSR No. 12.42.3.2) Item 58 3 Nos.
59 48.02 Single tee without door 110x110x110 mm (DSR No. 12.42.4.2) Item 59 1 Nos.
60 48.03 Shoe (Plain) 75 mm Shoe (DSR No. 12.42.6.1) Item 60 1 Nos.
61 48.04 Shoe (Plain) 110 mm Shoe (DSR No. 12.42.6.2) Item 61 1 Nos.
62 49 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 510x1040 mm bowl depth 250 mm (DSR No. 17.10.1.1) Item 62 1 Nos.
63 50 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading (DSR No. 9.51.2) Item 63 1.8 Sqm
64 51 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR No. 10.28) Item 64 1.3 Kg.
65 52 Supply and fixing submersible pump 5Hp of approved brand as per E/I (KSB or equivelent) (As per old contract) Item 65 1 Nos.
66 53 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) (DSR No. 21.3) Item 66
67 53.01 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) (DSR No. 21.3.2) Item 67 3 Sqm
68 53.02 With float glass panes of 8 mm thickness (weight not less than 20 kg/ sqm) (DSR No. 21.3.3) Item 68 3 Sqm
69 54 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of r+awl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) (DSR No. 12.45.1) Item 69 1.3 Sqm
70 55 Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) (DSR No. 9.147F.1) Item 70 2.5 Sqm
71 56 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR No. 12.22) Item 71 5 Each
72 57 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase (DSR No. 12.21.1) Item 72 5 Mtr
73 58 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 40 mm dia nominal bore (DSR NO. 18.10.5) Item 73 3 Mtr
74 59 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 50 mm dia nominal bore (DSR NO. 18.10.6) Item 74 3 Mtr
75 60 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) (DSR No 18.17) Item 75
76 60.01 40 mm nominal bore (DSR No. 18.17.3) Item 76 2 Each
77 60.02 65 mm nominal bore (DSR No. 18.17.5) Item 77 2 Each
78 60.03 80 mm nominal bore (DSR No. 18.17.6) Item 78 2 Each
79 61 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore (DSR No. 18.18.2) Item 79 10 Each
80 62 Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore (DSR No. 18.21.2.1) Item 80 5 Each
81 63 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil (DSR No. 2.6.1) Item 81 10 Cum
82 64 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (DSR No. 2.25) Item 82 10 Cum
83 65 Providing and fixing on wall face UPVC moulded fittings/ accessories for UPVC Class 'B' pipes including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (rates as per OM No. 11/ECCD-III dated 27.01.2018) Item 83
84 65.01 Coupler 75mm Item 84 3 Each
85 65.02 Coupler 110mm Item 85 3 Each
86 65.03 End Cap 75mm Item 86 3 Each
87 65.04 Plain Tee 110X75mm Item 87 3 Each
88 65.05 Plain Y Tee 110X75mm Item 88 3 Each
89 65.06 Plain Y Tee 75X75mm Item 89 3 Each
90 65.07 Plain Y Tee 110X110mm Item 90 3 Each
91 65.08 P Trap 110mm Item 91 3 Each
92 65.09 S Trap 110mm Item 92 3 Each
93 65.1 Nahani Trap 75mm Item 93 3 Each
94 65.11 Bend 450 110mm Item 94 3 Each
95 66 Providing, fixing and testing in position ISI marked (IS : 1239) G.I pipes (medium class) in exposed works complete with all necessary G.I fittings i.e. sockets, elbows, tees, bends, unions, plugs and clamps. (on terrace the pipes shall be supported at suitable interval and inside ducts these shall be properly clamped through duct walls by G.I. U clamp / bracket). The Galvanization shall conform to IS : 4736. The work shall include the painting with two coats enamel paint of approved quality and shade over a coat of primer on exposed pipe works including providing grooved fittings wherever pipe crosses exp joint, complete as required by the Engg-in-charge for proper completion of the work.(Make : Jindal (Hissar) / Prakash Surya) 65mm nominal bore (wall thickness - 3.6 mm) (As per Old Contract) Current Rate Item 95 1 RM
96 67 Providing, fixing and testing in position ISI marked (IS : 1239) G.I pipes (medium class) in exposed works complete with all necessary G.I fittings i.e. sockets, elbows, tees, bends, unions, plugs and clamps. (on terrace the pipes shall be supported at suitable interval and inside ducts these shall be properly clamped through duct walls by G.I. U clamp / bracket). The Galvanization shall conform to IS : 4736. The work shall include the painting with two coats enamel paint of approved quality and shade over a coat of primer on exposed pipe works including providing grooved fittings wherever pipe crosses exp joint, complete as required by the Engg-in-charge for proper completion of the work.(Make : Jindal (Hissar) / Prakash Surya) 80mm nominal bore (wall thickness - 4 mm) (As per Old Contract) Current Rate Item 96 1 RM
97 68 Supply & fixing in position ISI marked cast iron double flanged butterfly valves as per IS:13095, (PN 16) with SS disc, shaft, seating rings, nitrile rubber lining, internal fastening, nuts, bolts including transporting to worksite, 3 mm thick rubber gaskets etc. including testing, Complete as per drawings & directions of the Engineer-in-charge. (MAKE : IVC / Venus / Audco / Advance / SKS / CRI / AIP) 50 MM NB (BV) (As per Old Contract) Current Rate Item 97 1 Nos.
98 69 Supply & fixing in position ISI marked cast iron double flanged butterfly valves as per IS:13095, (PN 16) with SS disc, shaft, seating rings, nitrile rubber lining, internal fastening, nuts, bolts including transporting to worksite, 3 mm thick rubber gaskets etc. including testing, Complete as per drawings & directions of the Engineer-in-charge. (MAKE : IVC / Venus / Audco / Advance / SKS / CRI / AIP) 80 MM NB (As per Old Contract) Current Rate Item 98 1 Nos.
99 70 Supply & fixing in position ISI marked cast iron double flanged butterfly valves as per IS:13095, (PN 16) with SS disc, shaft, seating rings, nitrile rubber lining, internal fastening, nuts, bolts including transporting to worksite, 3 mm thick rubber gaskets etc. including testing, Complete as per drawings & directions of the Engineer-in-charge. (MAKE : IVC / Venus / Audco / Advance / SKS / CRI / AIP) 150 MM NB (As per Old Contract) Current Rate Item 99 1 Nos.
100 71 Supply & fixing in position cast iron body double flange dual plate wafer type check valve (NRV) (PN 16), with SS 304 plates, hinges, pins, springs, nitrile rubber lining, including transportation to worksite, supply & fixing SS nuts, SS bolts, 3 mm thick rubber gaskets, complete with testing as per direction of the Engineer - in - charge. (MAKE : IVC / Venus / Audco / Advance / SKS / CRI / AIP) 100 NB (As per Old Contract) Current Rate Item 100 1 Nos.
101 72 Providing & fixing 25 mm dia air release valve with forged brass body full way ball valve type isolating valve, flanges / union, suitable for sprinkler / wet riser / down comer system with all necessary connections complete in all respects. (Make : Newage / CIM / Leader / Sant) 25 mm dia air release valve(As per Old Contract) Current Rate Item 101 1 Nos.
102 73 Supply, fixing, testing & commissioning of 25 mm dia inspecting and testing assembly with gun metal valve, sight glass, by pass valve and connection to the drain line as required to complete the system.(As per Old Contract) Current Rate Item 102 1 Set
103 74 Providing, fixing, testing and commissioning of UL / FM / EN / VDS listed / approved conventional automatic fire Alarm detectors - (MAKE : System Sensor / Apollo / Siemens) Optical/Photoelectric type smoke detectors of photo-optic sensing chamber, 12 / 24 volt D.C., visual alarm indicator (LED's) "Blink - Red" in stand by and "Steady - red" in alarm complete in all respects with base as required. (As per Old Contract) Current Rate Item 103 1 Nos.
104 75 Providing, fixing, testing and commissioning of UL / FM / EN / VDS listed / approved conventional automatic fire Alarm detectors - (MAKE : System Sensor / Apollo / Siemens) Fixed cum rate of rise temprature type heat detectors , 12 / 24 volt D.C., visual alarm indicators (LED's) "Blink - Red" in stand by and "Steady - red" in alarm complete in all respects with base as required. (Current Rate) Item 104 1 Nos.
105 76 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) Sal wood (DSR No. 9.1.2) Item 105 0.1 Cum
106 77 brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means. (DSR No. 6.4.2 + 6.5) Item 106 3 Cum
107 78 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. (DSR No. 11.7) Item 107 5 Cum
108 79 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowd to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) (DSR No. 22.5) Item 108 5 Sqm
109 80 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm). (DSR No. 9.147D.3) Item 109 2 Sqm
110 81 Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) (DSR No. 9.147B.1) Item 110 2 Sqm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail