University Of Hyderabad-UOHYD has published Interior Furnishing Works At Amenity Centre And Canteen At Uoh Campus. Submission Date for this Tender is 20-10-2020. Furnishing Work Tenders in University of Hyderabad Hyderabad Telangana. Bidders can get complete Tender details and download the document.
Name of Work: Interior furnishing works of Campus Amenities Centre and Canteen at University of Hyderabad campus | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | 1. Comparative Statement for Quoted rates shall be based on rates exclusive of GST. 2. L-1 Shall be decided based on quoted rates exclusive of GST. 3. The bidder should quote rates exclusive of GST and may quote GST and may quote GST percentage separately. The GST shall be reimbursed on submit by them. | |||
2 | 2 | Interior and Furniture work, Ground Floor A. Students Welfare, DSW Chamber | |||
3 | 3 | DWS's Table : DWS's Table overall size 8'0"x3'6" with One Pedestal with 4 Drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel.8 / 9 mm for drawer bottom. Table top should be of Italian Marble of Beige colour Variety ( Rs 275/- to 300/- per Sqft base cost ) to be fixed on 19mm plywood base, Marble duly polished with 3M Tin Oxide Polish with Edges Double moulded. 4mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces and 1mm thick laminate for all internal visible and non visibleareaarea of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should be covered with 12mm thick plain Steam beech beading duly malemine polished. Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design in charge. | 1 | Nos | |
4 | 4 | Back Rack in DSW's Cabin: All as per the Design made in 19mm and 9mm plywood with 4mm veneer with malemineploish finish for all Exposed and 1mm thick laminate for Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge. | 90 | Sqft | |
5 | 5 | Wall Paneling in DSW Cabin: Providing and Fixing of Wall Paneling made with 1.5"x1.5"x2mm thick Aluminim Frame work Properly fixed to the Wall or Column with proper Spirit / Plumb level. Frame work to be covered with 6mm thick Plywood and 4 mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces . All as per the design and instructions of the design in charge. | 36 | Sqft | |
6 | 6 | Filing / Storage Racks: Providing and installing of 18" deep storage racks , ht 2'6" / 4'0"/ 7'0"/ 8'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished. All as per the instructions. | 78 | Sqft | |
7 | 7 | Dy DSW's / PrSecretaryTables : Table overall size 6'9"x2'6" with Single pedestals of four drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood. 12mm thick glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate. All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design in charge. | 4 | Nos | |
8 | 8 | Psychology Counsellor Tables :Table overall size 5'0"x2'3" with Single draw pedestals. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . 12mm thick Glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge. | 2 | Nos | |
9 | 9 | Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge. | 6 | Nos | |
10 | 10 | Back Racks for Dy DSW / Pr. Secr. with Filinf and Storage racks: All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge. | 190 | Sqft | |
11 | 11 | Staff Work Stations: Work Stations overall size 4'9"x2'0" / 4'6"x2'0" with Single pedestal. 19mm thick plywood for Top and for pedestals. Top should be shown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all internal visible area of plywood. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate. All the draws and key board tray should slide on telescopic channels. All handles of Brush finished SS handles, Strap lock, Box hinges etc standard hardware. All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. Cable manager provision to be provided in the table top. All as per the design and the instructions of the design in charge. | 53 | Rft | |
12 | 12 | Low Height Solid Partitions : Providing and Fixing of Low height partitions all made with Aluminium frame work made of 2.5"x1.5"x 2mm thick section with 2'0"x2'0" c/c vertically and horizontally . Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor, Vertical members should be firmly to the side wall available. Laminate should be considered in two colour combination. All as per the design and instructions of the design in charge. | 110 | Sqft | |
13 | 13 | Low Height Storage Racks: Providing and installing of 18" deep storage racks ,ht 2'6" / 4'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate. Inside both sides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished. All as per the instructions. | 48 | Sqft | |
14 | 14 | Overhead Storage Racks: Providing and installing of 16" deep storage racks , properly Fixed on to the Walls above the Worksations, ht 2'6" / 3'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate. Inside both sides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished. All as per the instructions. | 110 | Sqft | |
15 | 15 | Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board. | 85 | Sqft | |
16 | 16 | Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make | 380 | Sqft | |
17 | 17 | Chairs / Sofa Set:Executive Chairs (High back Revolving ) | 5 | Nos | |
18 | 18 | Work Stations Chairs ( Medium back Revolving ) | 12 | Nos | |
19 | 19 | Visitors Chairs (Low back Revolving ) | 9 | Nos | |
20 | 20 | Visitors Chairs at (Low back S type Non Revolving) | 30 | Nos | |
21 | 21 | Sofa sets ( 1x 3seater + 1x2seater ) | 1 | Set | |
22 | 22 | Corner / Side table : Corner and Side table at Sofa sets made with wood and Glass Top 24"x24" | 2 | Nos | |
23 | 23 | Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft) | 150 | Sqft | |
24 | 24 | Full Height Solid Partitions:(Psychology Counsellors ) : Providing and Fixing of Full height partitions all made with Aluminium frame work of 2.5"x 1.5" x2 mm section with 2'0"x2'0" c/c vertically and horizontally. Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the Slab and side wall available. Laminate should be considered in two colour combination. Including door All made in 35mm thick Flush door with 1mm lamination form both sides and 8mm plain glass with Etching / Acid texture border fixed with Steam beach molding duly melamine polished. 35mmX 12mm steam beach Lipping to be provided to all the edges of the door . Rate also to include the cost of Door Frame made with 3.5" X 1.5" Steam beach wood. Door Frame should be fixed properly to the Partitions, All Hardware should be of Brass / SS Brush finish with ISI mark. Hardware includes Concealed Door closer, Cylindrical Lock, Door stopper and other standard needs . All as per design and instructions of the design in charge. | 175 | Sqft | |
25 | 25 | B. CHIEF WARDEN: CHIEF WARDEN CHAMBER | |||
26 | 26 | CW's Table : CW's Table overall size 8'0"x3'6" with One Pedestal with 4 Drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel.8 / 9 mm for drawer bottom. Table top should be of Italian Marble of Beige colour Variety ( Rs 275/- to 300/- per Sqft base cost ) to be fixed on 19mm plywood base, Marble duly polished with 3M Tin Oxide Polish with Edges Double moulded. 4mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces and 1mm thick laminate for all internal visible and non visibleareaarea of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should be covered with 12mm thick plain Steam beech beading duly malemine polished. Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge. | 1 | Nos | |
27 | 27 | CW's Side Runner / Credenza (Computer Table ): Side table of size 5'6"x2'3"x21"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate and 4mm thick veneer for the Top and front area. 8mm Glass to be proveded on Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge. | 1 | Nos | |
28 | 28 | Back Rack in CW's Cabin: All as per the Design made in 19mm and 9mm plywood with 4mm veneer with malemineploish finish for all Exposed and 1mm thick laminate for Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge. | 90 | Sqft | |
29 | 29 | Wall Paneling in CW Cabin: Providing and Fixing of Wall Paneling made with 1.5"x1.5"x2mm thick Aluminim Frame work Properly fixed to the Wall or Column with proper Spirit / Plumb level. Frame work to be covered with 6mm thick Plywood and 4 mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces . All as per the design and instructions of the design in charge. | 36 | Sqft | |
30 | 30 | Additional CW Table : Table overall size 6'9"x2'6" with Single pedestals of four drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood. 12mm thick glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate. All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge. | 1 | Nos | |
31 | 31 | Dy CW's Tables :Table overall size 5'0"x2'3" with Single draw pedestals. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . 12mm thick Glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge. | 2 | Nos | |
32 | 32 | Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge. | 3 | Nos | |
33 | 33 | Back Racks with storage racks for Additional CW : All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge. | 48 | Sqft | |
34 | 34 | Staff Work Stations: Work Stations overall size 4'9"x2'0" / 4'6"x2'0" with Single pedestal. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly maleminepolished.Cable manager provsion to be provided in the table top. All as per the design and the instructions of the design incharge. | 82 | Rft | |
35 | 35 | Low Height Solid Partitions : Providing and Fixing of Low height partitions all made with Aluminium frame work made of 2.5"x1.5"x 2mm thick section with 2'0"x2'0" c/c vertically and horizontally . Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the side wall available. Laminate should be considered in two colour combination. All as per the design and instructions of the design in charge. | 110 | Sqft | |
36 | 36 | Low Height Storage Racks: Providing and installing of 18" deep storage racks ,ht 2'6" / 4'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished.All as per the instructions. | 72 | Sqft | |
37 | 37 | Overhead Storage Racks: Providing and installing of 16" deep storage racks ,prpoerly Fixed on to the Walls above the Worksations, ht 2'6" / 3'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished.All as per the instructions. | 124 | Sqft | |
38 | 38 | Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board. | 85 | Sqft | |
39 | 39 | Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make | 300 | Sqft | |
40 | 40 | Chairs / Sofa Set : Executive Chairs (High back Revolving ) | 4 | Nos | |
41 | 41 | Work Stations Chairs ( Medium back Revolving ) | 12 | Nos | |
42 | 42 | Visitors Chairs (Low back Revolving ) | 10 | Nos | |
43 | 43 | Visitors Chairs at (Low back S type Non Revolving) | 10 | Nos | |
44 | 44 | Sofa sets ( 1x 3seater + 1x2seater ) | 1 | Set | |
45 | 45 | Corner / Side table : Corner and Side table at Sofa sets made with wood and Glass Top 24"x24" | 2 | Nos | |
46 | 46 | Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft) | 150 | Sqft | |
47 | 47 | Full Height Solid Partitions ( Dy CW s): Providing and Fixing of Full height partitions all made with Aluminium frame work of 2.5"x 1.5" x2 mm section with 2'0"x2'0" c/c vertically and horizontally. Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the Slab and side wall available. Laminate should be considered in two colour combination. Including door All made in 35mm thick Flush door with 1mm lamination form both sides and 8mm plain glass with Etching / Acid texture border fixed with Steam beach molding duly melamine polished. 35mmX 12mm steam beach Lipping to be provided to all the edges of the door . Rate also to include the cost of Door Frame made with 3.5" X 1.5" Steam beach wood. Door Frame should be fixed properly to the Partitions, All Hardware should be of Brass / SS Brush finish with ISI mark. Hardware includes Concealed Door closer, Cylindrical Lock, Door stopper and other standard needs . All as per design and instructions of the design incharge. | 180 | Sqft | |
48 | 48 | Open Filling Racks: 18" Deep Ready-made Racks made up of Slotted MS Angles and MS Shelves of 1.2mm thick (18 guage ) MS CRCA Sheets. Duly Powder coated finish. Shelves at every 15" gap. Each module of 7'ht and 3' wide. | 15 | Nos | |
49 | 49 | C. SEMINAR HALL / COMMON AREAS | |||
50 | 50 | Overhead Storage Racks: 6" High Stage all made with 19mm thick ply and laminate, frame of 18"x18" with 6"x19mm ply and top coverd with 19mm ply and 1mm Laminate | 96 | Sqft | |
51 | 51 | Marker Board: White marker board all made with 12mm thick plywood on wall, 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board. | 72 | Sqft | |
52 | 52 | Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make | 180 | Sqft | |
53 | 53 | Table on Dias :3'0"x2'0" Simple Tables with 19mm ply with laminate finish. | 4 | Nos | |
54 | 54 | CHAIRS: Work Station Chairs (Medium back Revolving) | 4 | Nos | |
55 | 55 | Audience Chairs with Foldable Writing Pads | 72 | Nos | |
56 | 56 | Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft) | 675 | Sqft | |
57 | 57 | Waiting lounge Chairs ( Ground and First Floor ): Heavy Duty Set of Waiting Lounge Chairsall made with Stainless Frame and SS perforated Sheet. Each set containing 3 seats. All as per sample approved. | 45 | Sets | |
58 | 58 | Signages: All the Signages made with 1mm thick SS brush finished Sheet with Etched and Enamel filled Lettering, properly fixed at instructed placement. | 85 | Sqft | |
59 | 59 | Wall Murals / Graphics : | 1 | LS | |
60 | 60 | D. FIRST FLOOR: CHIEF PROCTOR CHIEF PROCTOR CHAMBER | |||
61 | 61 | CP's Table : DWS's Table overall size 8'0"x3'6" with One Pedestal with 4 Drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel.8 / 9 mm for drawer bottom. Table top should be of Italian Marble of Beige colour Variety ( Rs 275/- to 300/- per Sqft base cost ) to be fixed on 19mm plywood base, Marble duly polished with 3M Tin Oxide Polish with Edges Double moulded. 4mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces and 1mm thick laminate for all internal visible and non visibleareaarea of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should be covered with 12mm thick plain Steam beech beading duly malemine polished. Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge. | 1 | Nos | |
62 | 62 | CP's Side Runner / Credenza ( Computer Table ): Side table of size 5'6"x2'3"x21"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate and 4mm thick veneer for the Top and front area. 8mm Glass to be proveded on Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge. | 1 | Nos | |
63 | 63 | Back Rack in DSW's Cabin: All as per the Design made in 19mm and 9mm plywood with 4mm veneer with malemineploish finish for all Exposed and 1mm thick laminate for Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge. | 90 | Sqft | |
64 | 64 | Wall Paneling in DSW Cabin: Providing and Fixing of Wall Paneling made with 1.5"x1.5"x2mm thick Aluminim Frame work Properly fixed to the Wall or Column with proper Spirit / Plumb level. Frame work to be covered with 6mm thick Plywood and 4 mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces . All as per the design and instructions of the design in charge. | 36 | Sqft | |
65 | 65 | Tables at CP Pr. Secretary's Room :Table overall size 5'0"x2'3" with Single draw pedestals. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . 12mm thick Glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge. | 2 | Nos | |
66 | 66 | Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge. | 2 | Nos | |
67 | 67 | Filing and Storage racks at CP PrSecr. room: All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge. | 56 | Sqft | |
68 | 68 | Conference Room Table: 24" Deep Table with Box type Base and 19 mm Top all with 1mm thick Laminate on top and 1mm lamiante for other surfaces, All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished .Cable manager along with Cable trnchprovsion to be provided in the table top . All as per the design and the instructions of the design incharge. Table Should in 4' Modules.. | 40 | Rft | |
69 | 69 | Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board. | 120 | Sqft | |
70 | 70 | Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make | 300 | Sqft | |
71 | 71 | Chairs / Sofa Set : Executive Chairs (High back Revolving ) | 3 | Nos | |
72 | 72 | Conference Room Chairs ( Medium back Revolving ) | 20 | Nos | |
73 | 73 | Visitors Chairs (Low back Revolving ) | 4 | Nos | |
74 | 74 | Visitors Chairs at (Low back S type Non Revolving) | 6 | Nos | |
75 | 75 | Sofa sets ( 1x 3seater + 1x2seater ) | 1 | Set | |
76 | 76 | Corner / Side table : Corner and Side table at Sofa sets made with wood and Glass Top 24"x24" | 2 | Nos | |
77 | 77 | Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft) | 150 | Sqft | |
78 | 78 | Low Height Solid Partitions : Providing and Fixing of Low height partitions all made with Aluminium frame work made of 2.5"x1.5"x 2mm thick section with 2'0"x2'0" c/c vertically and horizontally . Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the side wall available. Laminate should be considered in two colour combination. All as per the design and instructions of the design in charge. | 30 | Sqft | |
79 | 79 | E. ICC GS CASH Chairperson Chamber: | |||
80 | 80 | ICC GS CASH Cp'sTable : Head's Table overall size 7'0"x3'0" with One Pedestal with 4 Drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel.8 / 9 mm for drawer bottom. Table top should be of Italian Marble of Beige colour Variety ( Rs 275/- to 300/- per Sqft base cost ) to be fixed on 19mm plywood base, Marble duly polished with 3M Tin Oxide Polish with Edges Double moulded. 4mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces and 1mm thick laminate for all internal visible and non visibleareaarea of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should be covered with 12mm thick plain Steam beech beading duly malemine polished. Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge. | 1 | Nos | |
81 | 81 | ICC GS CASH's Side Runner / Credenza ( Computer Table ): Side table of size 5'6"x2'3"x21"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate and 4mm thick veneer for the Top and front area. 8mm Glass to be proveded on Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge. | 1 | Nos | |
82 | 82 | Back Rack in ICC GS CASH's Cabin: All as per the Design made in 19mm and 9mm plywood with 4mm veneer with malemineploish finish for all Exposed and 1mm thick laminate for Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge. | 45 | Sqft | |
83 | 83 | Wall Paneling in DSW Cabin: Providing and Fixing of Wall Paneling made with 1.5"x1.5"x2mm thick Aluminim Frame work Properly fixed to the Wall or Column with proper Spirit / Plumb level. Frame work to be covered with 6mm thick Plywood and 4 mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces . All as per the design and instructions of the design in charge. | 36 | Sqft | |
84 | 84 | Tables at ICC GS CASH Staff's Room :Table overall size 5'0"x2'3" with Single draw pedestals. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . 12mm thick Glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge. | 2 | Nos | |
85 | 85 | Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge. | 2 | Nos | |
86 | 86 | Filing and Storage racks at ICC GS CASH PrSecr. room: All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge. | 130 | Sqft | |
87 | 87 | Staff Work Stations: Work Stations overall size 4'9"x2'0" / 4'6"x2'0" with Single pedestal. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly maleminepolished.Cable manager provsion to be provided in the table top. All as per the design and the instructions of the design incharge. | 10 | Rft | |
88 | 88 | Conference Room Table: 24" Deep Table with Box type Base and 19 mm Top all with 1mm thick Laminate on top and 1mm lamiante for other surfaces, All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished .Cable manager along with Cable trnchprovsion to be provided in the table top . All as per the design and the instructions of the design incharge. Table Should in 4' Modules.. | 40 | Rft | |
89 | 89 | Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board. | 80 | Sqft | |
90 | 90 | Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make | 230 | Sqft | |
91 | 91 | Chairs / Sofa Set: Executive Chairs (High back Revolving ) | 2 | Nos | |
92 | 92 | Conference Room Chairs ( Medium back Revolving ) | 24 | Nos | |
93 | 93 | Visitors Chairs (Low back Revolving ) | 3 | Nos | |
94 | 94 | Visitors Chairs at (Low back S type Non Revolving) | 12 | Nos | |
95 | 95 | Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft) | 150 | Sqft | |
96 | 96 | Low Height Solid Partitions : Providing and Fixing of Low height partitions all made with Aluminium frame work made of 2.5"x1.5"x 2mm thick section with 2'0"x2'0" c/c vertically and horizontally . Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the side wall available. Laminate should be considered in two colour combination. All as per the design and instructions of the design in charge. | 45 | Sqft | |
97 | 97 | F. NSS COORDINATOR | |||
98 | 98 | Tables at NSS Coordinators and DO's Room :Table overall size 5'0"x2'3" with Single draw pedestals. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . 12mm thick Glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge. | 2 | Nos | |
99 | 99 | Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge. | 2 | Nos | |
100 | 100 | Filing and Storage racks at NSS coordtr. room: All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge. | 160 | Sqft | |
101 | 101 | Full Height Solid Partitions ( NSS Coordinator's): Providing and Fixing of Full height partitions all made with Aluminium frame work of 2.5"x 1.5" x2 mm section with 2'0"x2'0" c/c vertically and horizontally. Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the Slab and side wall available. Laminate should be considered in two colour combination. Including door All made in 35mm thick Flush door with 1mm lamination form both sides and 8mm plain glass with Etching / Acid texture border fixed with Steam beach molding duly melamine polished. 35mmX 12mm steam beach Lipping to be provided to all the edges of the door . Rate also to include the cost of Door Frame made with 3.5" X 1.5" Steam beach wood. Door Frame should be fixed properly to the Partitions, All Hardware should be of Brass / SS Brush finish with ISI mark. Hardware includes Concealed Door closer, Cylindrical Lock, Door stopper and other standard needs . All as per design and instructions of the design incharge. | 110 | Sqft | |
102 | 102 | Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board. | 24 | Sqft | |
103 | 103 | Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make | 48 | Sqft | |
104 | 104 | Chairs / Sofa Set: Executive Chairs (High back Revolving ) | 2 | Nos | |
105 | 105 | Visitors Chairs at (Low back S type Non Revolving) | 8 | Nos | |
106 | 106 | Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft) | 120 | Sqft | |
107 | 107 | G. PGAB - Placement Cell PGAB - Chairman Chamber | |||
108 | 108 | PGAB Chairman's Table : Head Table overall size 8'0"x3'6" with One Pedestal with 4 Drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel.8 / 9 mm for drawer bottom. Table top should be of Italian Marble of Beige colour Variety ( Rs 275/- to 300/- per Sqft base cost ) to be fixed on 19mm plywood base, Marble duly polished with 3M Tin Oxide Polish with Edges Double moulded. 4mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces and 1mm thick laminate for all internal visible and non visibleareaarea of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should be covered with 12mm thick plain Steam beech beading duly malemine polished. Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge. | 1 | Nos | |
109 | 109 | PGAB Head Side Runner / Credenza ( Computer Table ): Side table of size 5'6"x2'3"x21"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate and 4mm thick veneer for the Top and front area. 8mm Glass to be proveded on Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge. | 1 | Nos | |
110 | 110 | Back Rack in PGAB Head's Cabin: All as per the Design made in 19mm and 9mm plywood with 4mm veneer with malemineploish finish for all Exposed and 1mm thick laminate for Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge. | 90 | Sqft | |
111 | 111 | Wall Paneling in Cabin: Providing and Fixing of Wall Paneling made with 1.5"x1.5"x2mm thick Aluminim Frame work Properly fixed to the Wall or Column with proper Spirit / Plumb level. Frame work to be covered with 6mm thick Plywood and 4 mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces . All as per the design and instructions of the design in charge. | 36 | Sqft | |
112 | 112 | Filing / Storage Racks: Providing and installing of 18" deep storage racks , ht 2'6" / 4'0"/ 7'0"/ 8'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished.All as per the instructions. | 120 | Sqft | |
113 | 113 | PGAB PrSecretaryTables : Table overall size 6'9"x2'6" with Single pedestals of four drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood. 12mm thick glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate. All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge. | 1 | Nos | |
114 | 114 | Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge. | 1 | Nos | |
115 | 115 | Back Racks for PGAB Pr. Secr. with Filinf and Storage racks: All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge. | 60 | Sqft | |
116 | 116 | Staff Work Stations : Work Stations overall size 4'9"x2'0" / 4'6"x2'0" with Single pedestal. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly maleminepolished.Cable manager provsion to be provided in the table top. All as per the design and the instructions of the design incharge. | 40 | Rft | |
117 | 117 | Low Height Solid Partitions : Providing and Fixing of Low height partitions all made with Aluminium frame work made of 2.5"x1.5"x 2mm thick section with 2'0"x2'0" c/c vertically and horizontally . Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the side wall available. Laminate should be considered in two colour combination. All as per the design and instructions of the design in charge. | 110 | Sqft | |
118 | 118 | Low Height Storage Racks: Providing and installing of 18" deep storage racks ,ht 2'6" / 4'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished.All as per the instructions. | 24 | Sqft | |
119 | 119 | Overhead Storage Racks: Providing and installing of 16" deep storage racks ,prpoerly Fixed on to the Walls above the Worksations, ht 2'6" / 3'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished.All as per the instructions. | 66 | Sqft | |
120 | 120 | Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board. | 85 | Sqft | |
121 | 121 | Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make | 240 | Sqft | |
122 | 122 | Chairs / Sofa Set: Executive Chairs (High back Revolving ) | 2 | Nos | |
123 | 123 | Work Stations Chairs ( Medium back Revolving ) | 4 | Nos | |
124 | 124 | Visitors Chairs (Low back Revolving ) | 6 | Nos | |
125 | 125 | Visitors Chairs at (Low back S type Non Revolving) | 10 | Nos | |
126 | 126 | Sofa sets ( 1x 3seater + 1x2seater ) | 1 | Set | |
127 | 127 | Corner / Side table : Corner and Side table at Sofa sets made with wood and Glass Top 24"x24" | 2 | Nos | |
128 | 128 | Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft) | 150 | Sqft | |
129 | 129 | Outdoor Furniture : Providing and Supply of 4' dia Table , 4 Chairs and an Umbrella of 5'Dia of Outdoor Grade | 1 | Set |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail