}

Repair / Maintenance Of Street Lights , Security Lights , Post Top Lanterns , High Mast Lights , Garden Lights And Gate Lights Including Control Panels At Dolphin Hills And Other Connected Misc Works Under Age E/M No - I Of Ge ( U-I ) Visakhapatna, Garrison Engineer Utility-I Visakhapatnam-Andhra Pradesh

Military Engineer Services-MES has published Repair / Maintenance Of Street Lights , Security Lights , Post Top Lanterns , High Mast Lights , Garden Lights And Gate Lights Including Control Panels At Dolphin Hills And Other Connected Misc Works Under Age E/M No - I Of Ge ( U-I ) Visakhapatna. Submission Date for this Tender is 21-10-2020. Tube Light Tenders in Garrison Engineer Utility-I Visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

25646183
Repair / Maintenance Of Street Lights , Security Lights , Post Top Lanterns , High Mast Lights , Garden Lights And Gate Lights Including Control Panels At Dolphin Hills And Other Connected Misc Works Under Age E/M No - I Of Ge ( U-I ) Visakhapatna
Open Tender
Indian
Andhra Pradesh
Garrison Engineer Utility-I Visakhapatnam
21-10-2020

Tender Details

Repair / Maintenance Of Street Lights , Security Lights , Post Top Lanterns , High Mast Lights , Garden Lights And Gate Lights Including Control Panels At Dolphin Hills And Other Connected Misc Works Under Age E/M No - I Of Ge ( U-I ) Visakhapatnam

Key Value

Document Fees
INR 500 /-
EMD
INR 98000.0 /-
Tender Value
INR 49 Lakhs /-

BOQ Items

NAME OF WORK : REPAIR / MAINT OF STREET LIGHTS, SECURITY LIGHTS, POST TOP LANTERNS, HIGH MAST LIGHTS, GARDEN LIGHTS AND GATE LIGHTS INCLUDING CONTROL PANELS AT DOLPHIN HILLS AND OTHER CONNECTED MISC WORKS UNDER AGE E/M NO - I OF GE (U-I) VISAKHAPATNAM
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in trenches n.exc 1.5 m wide and not exc 1.5 m depth and getting out in soft and loose soil complete all as specified and directed. 226 Cum
2 2 Returning and filling in of excavated material any type including spreading,levelling,watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed. 141 Cum
3 3 Removal of surplus excavated material of any type not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 85 Cum
4 4 M&L for Sand cushioning/sand covering for underground cable protection complete all as specified.\nNote: Punned thickness only will be measured and paid. 68 Cum
5 5 Supply and laying sub class 'B' bricks of old size (approved size locally available) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge 7300 Each
6 6 Supply, fixing and testing straight through joint heat shrinkable type with jointing kit suitable for XLPE insulated armoured heavy duty aluminium conductor 1100 Volts grade Cable 3.5/4 core 25 Sqmm- 50 Sqmm size complete all as directed .\nMake: 3M / Denson / M-Seal / Raychem\n 2 Each
7 7 Supply & lay or fixing or passing through pipe or in cable ducts, 1100 volts grade, XLPE insulated, armoured, electric power cables (heavy duty) with aluminium conductor of the following sizes including taking down old one complete all as specified and as directed. \n( MAKE: Havells / Gloster Cables / CCI )
8 7.01 16 Sqmm 4 core 400 RM
9 7.02 35 Sqmm 3.5 Core 200 RM
10 7.03 95 Sqmm 3.5 Core 200 RM
11 7.04 120 Sqmm 3.5 core 200 RM
12 8 S&F in repair MCCB 3 Pole, 415 V, adjustable type, 63 to 100 Amps with minimum breaking capacity 16 KA Complete all as specified and directed.\n( Make: GE / L&T / C&S / Schneider ) 3 Each
13 9 S&F in repair MCCB 3 Pole, 415 V, adjustable type, 125 Amps with minimum breaking capacity 16 KA Complete all as specified and directed.\n( Make: GE / L&T / C&S / Schneider ) 2 Each
14 10 S&F in repair MCCB 3 Pole, 415 V, adjustable type, 160 Amps with minimum breaking capacity 25 KA Complete all as specified and directed.\n( Make: GE / L&T / C&S / Schneider ) 2 Each
15 11 S&F in repair MCCB 3 Pole, 415 V, adjustable type, 200 Amps with minimum breaking capacity 36 KA Complete all as specified and directed.\n( Make: GE / L&T / C&S / Schneider ) 2 Each
16 12 S&F in repair MCCB 3 Pole, 415 V, adjustable type, 250 Amps with minimum breaking capacity 36 KA Complete all as specified and directed.\n( Make: GE / L&T / C&S / Schneider ) 2 Each
17 13 S&F in repair MCCB 3 Pole, 415 V, adjustable type, 400 Amps with minimum breaking capacity 36 KA Complete all as specified and directed.\n( Make: GE / L&T / C&S / Schneider ) 2 Each
18 14 S&F in repair MCCB 4 Pole, 415 V, adjustable type, 630 Amps with minimum breaking capacity 50 KA Complete all as specified and directed.\n( Make: GE / L&T / C&S / Schneider ) 1 Each
19 15 M&L for GI pipe light grade 50 mm dia laid along road crossings / plinth protection with suitable fittings for cable protection or fixed to the pole/ Wall complete all as specified and directed by Engineer-in-Charge .\nMake : Surya Roshni Ltd / Tata / Jindal steel / Prakash 24 RM
20 16 M&L for GI pipe light grade 80 mm dia laid along road crossings / plinth protection with suitable fittings for cable protection or fixed to the pole/ Wall complete all as specified and directed by Engineer-in-Charge .\nMake : Surya Roshni Ltd / Tata / Jindal steel / Prakash 12 RM
21 17 Cutting the tarmac / hard standings and excavating in trenches across the road for laying cable including making good the excavated portion by means of PCC 1:3:6, type C1 matching with the surroundings complete all as directed. 4 Cum
22 18 Boring of holes underneath road / foot path / hardstanding / culvert etc by using trenchless technology by ultra sound technic using necessary machinery including providing 100 mm dia GI pipe medium grade for drawing cables complete all as specified and directed.\nMake of GI Pipe : Surya Roshni Ltd / Tata / Jindal steel / Prakash\nNote: Rate quoted shall include GI pipe also. \n 35 RM
23 19 Outsourcing of services for operation & maintenance of of central type AC Plant (3x25 TR) and AHU at TS-II for smooth and trouble free operation round the clock in three shifts of 08 hours each including Sundays and holidays including attending and rectifying minor adjustments to the controls for smooth operation of the compressor units condenser water pump, softening plant and blower motor and keeping an hourly record of the plant running and room temperature all as specified and directed by Engineer-in-Charge.
24 19.01 (i) One skilled operator in each shift\n\nNote : (i) Bidder has to quote the following mandatory provisions related to wages and misc benefits for workmen which includes all Taxes, cess, levis as applicable including GST. (ii) In case the rates quoted are less than the prevailing rates / instructions under any heading(s), the bid will be treated as non-bonafide / invalid which shall be disqualified and such bids will not be considered for acceptance (iii) Payment for item nos. 19.00 (i) (a) to (f) will be done after submission of valid & authentic documents in support of proof of payment as mentioned in tender documents.\n
25 19.02 (a) Wage. 1005 Per shift of 08 hrs
26 19.03 (b) Employer's Contribution towards Employees Provident Fund (EPF) . 1005 Per shift of 08 hrs
27 19.04 (c) Employer's Contribution towards Employees State Insurance Corporation (ESIC ). 1005 Per shift of 08 hrs
28 19.05 (d) Bonus in terms of "The Code on Wages-2019" 1005 Per shift of 08 hrs
29 19.06 (e) Labour Welfare Cess (LWC) on Sl item no. 19.00 (i) (a) to (d) . 1005 Per shift of 08 hrs
30 19.07 (f) Overhead and profit on Sl item no. 19.00 (i) (a) to (e) .\n\n[Quotations with ‘Nil’ or ‘Zero’ consideration (overhead and profit) shall be considered as “non bonafide bid”]. 1005 Per shift of 08 hrs
31 19.08 NOTE for item No. 19.00 :\nThe rate shall also include the following:\n(i) Necessary transportation to work man.\n(ii) Additional man power if required for early restoration of supply in case of emergency. \n(iii) The Contractor has to work in conjuction with other agencies working at Dolphin Hill to resolve the break downs without creating inconvenience to Users.\n(iv) The installation will be handed over in operating state on the commencement of contract though work order.\n(v) Cleaning of plant sarrounding area and plant room daily.\n(vi) Contractor shall be responsible to communicate the concerned JE/AGE/GE regarding any type of breakdown/fault within 10 minutes of incident.\n(vii) One emergency light and necessary tools should be available in the tool box with operator for smooth functioning.\n \n
32 20 Supply and fix in replacement Electronic Timer suitable for street light timer panel/DG AMF panel/ Star Delta Starter panel complete all as specified and directed by Engineer-in-Charge ..\nMake: L&T / Indoasian /GE /BCH. 6 Each
33 21 Taking down defective street light fitting of any size, type and capacity from height of pole / walls / high mast of any location exceeding 7.0 m height for repair work and re-fixing back after repair work is carried out including checking, inspecting, testing and commmissioning complete all as directed by Engr-in-Charge.\nNote: (a) The M/L for Items like ballast, lamp, igniters, capacitors, electronic drivers,surge protection devices etc shall be measured and paid separately under relevant items. (b) Necessary tools like ladders & other T&P required shall be arranged by the Contractor. (c) The rate quoted deemed to be inclusive for minor parts nut bolts, circle clips, clamps etc if any required at site. (d) The M/L for repairs to LED panel is not included in the scope and shall be measured and paid separately. 444 Job
34 22 Supply only the following spares suitable for street light/flood light/post top lantern light fittings of Make: Havells / Bajaj / Philips / CG / GE
35 22.01 Electronic driver suitable for 100 to 150 W LED light fitting 160 Each
36 22.02 Electronic driver suitable for 70 to 80 W LED light fitting 20 Each
37 22.03 Electronic driver suitable for 40 to 50 W LED light fitting 5 Each
38 22.04 Surge protection device of capacity 10 KV suitable for LED light fitting 80 Each
39 22.05 Ballast SV/MH 400 W 25 Each
40 22.06 HPSV/MH lamps single end/double end/tubular/eliptical clear/coated rated 400 W 25 Each
41 22.07 Igniters for 150/250/400 W HPMV/HPSV/MH 32 Each
42 22.08 Ballast SV/MH 150 W 35 Each
43 22.09 HPSV/MH lamps single end/double end/tubular/eliptical clear/coated rated 150 W 30 Each
44 22.1 Capacitors for 150/250/400 W HPMV/HPSV/MH 32 Each
45 23 Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 9000 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed.\n(Make: ENDURAPEARLMAGNUMSL 100WLED757PASYTOTGAST of Havells or equivalent in Philips/Bajaj/Wipro/GE/CG as approoved by GE). \nNote: The GI pipe bracket if required will be measured and paid separately under relevant items 15 Each
46 24 Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 7500 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed.\n(Make: ENDURACITYLINERNEOMPSL80WLED757PASYBOTG of Havells or equivalent in Philips/Bajaj/Wipro/GE/CG as approoved by GE). \nNote: The GI pipe bracket if required will be measured and paid separately under relevant items 15 Each
47 25 Dismantling old unserviceable flood light fittings from any position exceeding 11.0 m height, Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame LED type (with total lumen output not less than 13700 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65 and surge protection device of 10 KV capacity etc including necessary angle iron supports duly painted in two coats over a coat of primer , clamps, nuts and bolts etc complete and testing on completion all as specified and as directed \n(Make: JETAIRISFLS150WLED757PSYMLTG of Havells or equivalent in Philips/Bajaj/Wipro/GE/CG as approoved by GE). 10 Each
48 26 Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 10000 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed.\n(Make: ENDURAPEARLMAGNUMSL120WLED757PASYTOTG of Havells or or equivalent in Philips/Bajaj/Wipro/GE/CG as approoved by GE). \nNote: The GI pipe bracket if required will be measured and paid separately under relevant schedule items 8 Each
49 27 Dismantling old unserviceable flood light fittings from any position exceeding 7.5 m height, Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame LED type (with total lumen output not less than 10000 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65 and surge protection device of 10 KV capacity etc including necessary angle iron supports , clamps etc complete and testing on completion all as specified and as directed \n(Make: JETAIRISFLS100WLED757ASYMLTG of Havells or equivalent in Philips/Bajaj/Wipro/GE/CG as approoved by GE). 8 Each
50 28 Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 8500 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed.\n(Make: ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO of Havells or or equivalent in Philips/Bajaj/Wipro/GE/CG as approoved by GE). \nNote: The GI pipe bracket if required will be measured and paid separately under relevant schedule items 5 Each
51 29 S&F in repair PVC insulated 3 core 1.5 Sq mm stranded copper conductor cable for connecting junction box to street light fitting testing and commissioning all as directed. \n( Make: Plaza/ Gloster/Polycab/Havells ). 200 RM
52 30 Supply and fix PVC (thermo plastic) street light junction box heavy duty with locking arrangement 3 phase aluminium bus bar incl 02 Nos PVC conduit upto the height of top most level of coping of pole from GL alongwith necessary MS clamp nut bolts and washers for fixing and 01 No MCB single pole 240 V 6-32 Amps complete including taking down old one complete all as specified and directed. \n(Make:- Sintex /Hensel) 50 Each
53 31 M&L for bracket of street light fitting made out of 40 mm bore GI pipe light grade bent to shape required, not less than 1.20 m long, fixed with and including MS flat iron clamps made out of 40 x 6 mm FI, bolts, nuts, washers etc complete including dismantling old one complete all as specified and directed.\n( Make : Surya Roshni Ltd / Tata / Jindal steel / Prakash ) 20 Each Job
54 32 M&L for preparation of old painted steel surfaces of 9 m long steel poles including removing oily/greasy spots and applying one coat of aluminium paint complete including applying a coat of white wash on pole coping and lettering the pole details with 125 mm dia adhesive sticker with white letters on blackground etc complete all as directed 300 Job
55 33 M&L for fixing in repair adhesive sticker radium type red coloured water resistant of approx 2 inches width around the circumference of pole at a approx height of two meters all as directed. 100 RM
56 34 Repairs to High Mast/mid mast pole motor of Capacity 1.0 HP/0.75 KW 415 Volts 50 Hz 3 Phase 930 RPM and necessary rewinding with super enamelled copper wire all as per existing and servicing/greasing of reduction gear box complete all as specified and as directed by Engr-in-Charge. 2 Each Job
57 35 Repair/ Maint of the control panel of High mast/Mid mast and replacement of all unserviceable parts such as contactors/timers etc complete including painting with a coat of synthetic enamel paint 2 Each Job
58 36 Repairs to High Mast/mid mast of 12.5 m to 16 m height lantern carriage/winch, checking for movement, inspecting the alignment, replacement of broken/defective SS wire roper of size 6 mm 7/19 construction complete, replacement of 5 core 2.5 Sqmm flexible copper conductor, ERP insulated PCP/PVC sheathed trailing cable complete, testing & commissioning complete all as directed by Engr-in-Charge 2 Job
59 37 S&F in repair PVC insulated 6 core 2.5 Sq mm copper conductor cable for connecting highmast light fitting testing and commissioning all as directed. \n( Make: Plaza/ Gloster/Polycab/Havells ). 60 RM
60 38 Taking down old unserviceable post top lantern fittings and Supply & fixing post top luminarie LED type of 45 W with IP 65 protection with die cast aluminium graphite grey powder coated finished body , polycarbonate opal diffuser, low power warm white (WW) LEDs with better heat dissipation, high efficient constant current electronic driver having operating voltage range from 140 to 280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 10 KV etc complete suitable for 60 mm OD pipe entry including suitable size loop in loop out boxes & flexible 3 core 1.5 Sqmm copper connecting cable from loop in loop out box to fitting etc complete all as specified & directed. \n(Make: BGCP45WLEDWW of Bajaj or equivalent in Philips /CG /Wipro /GE /Havells as approoved by GE). \nNote: The rate quoted shall include GI pipe as required along with foundation , nuts and bolts etc. 8 Each
61 39 Supply and erection, testing and commissioning of Hot dip galvanised octagonal pole of 7.5 m height, top dia 70 mm bottom dia 135 mm, Base plate 225mm x 225 mm x 16 mm, foundation bolt M20 x 700 - 04 Nos complete with single arm GI bracket of suitable size and including built in connecter control box with locking arrangement along with with 5/6 Amps MCB - 01 No, 50 Amps rated 3 pole connector- 01 Nos, neutral link mounted and Din rail suitable size for mounting MCB/Connector etc complete in the box and flexible 3 core 1.5 Sqmm copper connecting cable from control box to fitting all as directed including dismantling old one complete all as specified and directed.\n( Make: C&N / Utkarsh / GE or Equivalent ).\nNOTE :- The rate quoted shall include the following :\n(i) The required RCC foundation shall be designed as per manufacturers instructions considering safe bearing capacity of soil as 10 t/m2 which shall be got approved by GE before execution of work.. \n(ii) Necessary Earth work, RCC M-20 shallow foundation, reinforcement steel as per design, foundation bolts manufactured with special steel along with nuts, washers, anchor plates & templates complete set etc.\n(iii) Erection and commissioning of the octagonal pole with the help of suitable T & P. \n 8 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail