Military Engineer Services-MES has published Special Repair To Bldg No . T-364 At Dholewal Mil Complex And Provn Of False Ceiling In Bldg No . T-05 At Baddowal Under Ge. Submission Date for this Tender is 01-12-2020. Building Repair Tenders in Dholewal and Baddowal under GE Ludhiana Punjab. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 20-Nov-2020 | date2 | Date | 01-12-2020 |
Name of Work: Special repair to bldg No. T-364 at Dholewal Mil Complex and Provn of false ceiling in Bldg No. T-05 at Baddowal under GE Ludhiana. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Sch 'A' Sec-I | |||
2 | 1.01 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level).Complete all as specified and directed by Engineer-in-Charge. | 13.84 | Cum | |
3 | 2 | Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed by Engineer-in-Charge. | 140 | Sqm | |
4 | 3 | M&L, Vitrified ceramic Light shade coloured tiles 10mm thick square/rectungular polished area of each tile not exceeding o.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 20mm thick screed bed of cm 1:6 Complete all as specified and directed by Engineer-in-Charge. | 80 | Sqm | |
5 | 4 | Ditto as item herein above but as in skirting over rendering 10mm thick in cement mortar 1:4.Complete all as specified and directed by Engineer-in-Charge. | 9 | Sqm | |
6 | 5 | M&L, 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggr. Finished even and fair.Complete all as specified and directed by Engineer-in-Charge. | 85 | Sqm | |
7 | 6 | M&L for hardcore of broken stone boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface Complete all as specified and directed by Engineer-in-Charge. | 3.6 | Cum | |
8 | 7 | M&L 50mm thick PCC 1:2:4Type B-1 using 20mm crushed stone aggregate as in plinth protection and like finished even and smooth without using extra cement Complete all as specified and directed by Engineer-in-Charge. | 36 | Sqm | |
9 | 8 | Taking down chowkats or frames n.exc 1.5 Sqm.Complete all as specified and directed by Engineer-in-Charge. | 2 | Each | |
10 | 9 | Taking down chowkats or frames exc 1.5 Sqm but n.exc 4.0 Sqm with shutters (without taking off shutters from the frame).Complete all as specified and directed by Engineer-in-Charge. | 2 | Each | |
11 | 10 | S&F, steel windows/ ventilator with side hung shutters incl box type hing. With glazing bars and steel peg stay. Each window shutter is to be fitted with 1 steel handle 100mm long casted out of MS Z section and two number of mild steel barrel tower bolts 150mm long on suitable size MS flat.Complete all as specified and directed by Engineer-in-Charge. | 1 | Sqm | |
12 | 11 | S&F, steel windows with side hung shutters incl box type hing. Without glazing bars and steel peg stay. Each window shutter is to be fitted with 1 steel handle 100mm long casted out of MS Z section and two number of mild steel barrel tower bolts 150mm long on suitable size MS flat.Complete all as specified and directed by Engineer-in-Charge. | 1 | Sqm | |
13 | 12 | S&F, mild steel Framed work such as grills, gratings, etc framed guard bars ,ladders railings ,frame of water tanks etc confirming to fe 410 or Fe 310 Complete all as specified and directed by Engineer-in-Charge. | 4 | Kg | |
14 | 13 | S&F, galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or wire stapples Complete all as specified and directed by Engineer-in-Charge. | 8 | Sqm | |
15 | 14 | M&L, two coats of synthetic enamel paint to untreated surfaces of steel over 10cm width or girth not otherwise described over a coat of red oxide primer after preparation Complete all as specified and directed by Engineer-in-Charge. | 5 | Sqm | |
16 | 15 | S&F, pressed steel frames,size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.Complete all as specified and directed by Engineer-in-Charge. | 10 | RM | |
17 | 16 | S&F, factory made 2nd class 35mm thick hard wood plain, framed, panelled shutters (any number of panels) with panels of 9mm thick BWP commercial ply.Complete all as specified and directed by Engineer-in-Charge. | 4 | Sqm | |
18 | 17 | S&F, 35mm thick second class hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I Complete all as specified and directed by Engineer-in-Charge. | 4 | Sqm | |
19 | 18 | S&F, mild steel 300mm helical door spring , ordinary rat tail rod patteren including roller and roller plate Complete all as specified and directed by Engineer-in-Charge. | 2 | Each | |
20 | 19 | M&L, Providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for pressed steel chowkhats.Complete all as specified and directed by Engineer-in-Charge. | 0.3 | Cum | |
21 | 20 | M&L, two coats of synthetic enamel painting on wooden surfaces over a coat of pink primer inclding prepration of newly untreates surfaces.Complete all as specified and directed by Engineer-in-Charge. | 12 | Sqm | |
22 | 21 | S&F, 150mm aluminium anodised barrel tower bolts of extruded section and fixed.Complete all as specified and directed by Engineer-in-Charge. | 4 | Each | |
23 | 22 | S&F, 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.Complete all as specified and directed by Engineer-in-Charge. | 4 | Each | |
24 | 23 | S&F, 125mm aluminium handles, cast type , anodised.Complete all as specified and directed by Engineer-in-Charge. | 8 | Each | |
25 | 24 | S&F ,second class hardwood small fittings as in shaped door/ window stops incl all necessary labours, articles n exc 200 cucm each Complete all as specified and directed by Engineer-in-Charge. | 4 | Each | |
26 | 25 | Dismantling wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs, any thickness, incl. cover fillets.Complete all as specified and directed by Engineer-in-Charge. | 105 | Sqm | |
27 | 26 | Dismantling framed timber scantling 40 sq cm and over in section in any position (framed work) Complete all as specified and directed by Engineer-in-Charge. | 2 | Cum | |
28 | 27 | S&F, GI frame work 605 X 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate chennel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fastener with and including ceiling section (not exc. 1.2m length) of 0.5mm thickness having kurled web of 50mm flange of 26 mm each with lips of 1050 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.Complete all as specified and directed by Engineer-in-Charge. | 164 | Sqm | |
29 | 28 | S&F, PVC insulation panels of thickness 10mm with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of aluminium/G.I./M.S. as per specification and drawing Complete all as specified and directed by Engineer-in-Charge. | 59 | Sqm | |
30 | 29 | S&F, 4mm thick E-board , multipurpiose, decorative type,for ceiling purpose .Complete all as specified and directed by Engineer-in-Charge. (Make : Everest/Charminar/Lake & Hill). | 105 | Sqm | |
31 | 30 | S&F, Hangers 6mm dia GI (upto 1200 mm length) adjustjng level fixed to roof surfaces Complete all as specified and directed by Engineer-in-Charge. | 164 | Sqm | |
32 | 31 | Dismantling Asbestos cement corrugated or semi corrugated sheet in roof covering Complete all as specified and directed by Engineer-in-Charge. | 205 | Sqm | |
33 | 32 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as Complete all as specified and directed by Engineer-in-Charge. | 90 | Sqm | |
34 | 33 | S&F, pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Complete all as specified and directed by Engineer-in-Charge. | 10 | Sqm | |
35 | 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided.Complete all as specified and directed by Engineer-in-Charge. | 200 | kg | |
36 | 35 | S&F, mild steel work confirming to Fe 290 grade-E -165 as in wind ties in roof covering.Complete all as specified and directed by Engineer-in-Charge. | 55 | Kg | |
37 | 36 | S&F, Roof trusses (framed), trussed , purlins , crane gantries, rails etc (beam , tee , angle, channel or flat sections) Complete all as specified and directed by Engineer-in-Charge. | 1200 | Kg | |
38 | 37 | M&L, two coats of synthetic enamel paint to untreated surfaces of steel over 10cm width or girth not otherwise described over a coat of red oxide primer after preparation.Complete all as specified and directed by Engineer-in-Charge. | 75 | Sqm | |
39 | 38 | Demolition of brick work built in cement mortar .Complete all as specified and directed by Engineer-in-Charge. | 10 | Cum | |
40 | 39 | M&L, Brick work with sub class "B" bricks straight or curved on plan etc 6 m mean radius in CM 1:4 Complete all as specified and directed by Engineer-in-Charge. | 8 | Cum | |
41 | 40 | . -ditto- but except bricks. | 2 | Cum | |
42 | 41 | M&L, Brick work with sub class Old B brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 Complete all as specified and directed by Engineer-in-Charge. | 10 | Sqm | |
43 | 42 | M&L ,15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finsihed the surfaces even and smooth without using extra cement. Complete all as specified and directed by Engineer-in-Charge. | 226.96 | Sqm | |
44 | 43 | M&L for preparation of new plastered wall surfaces and applying three coats of whitewash Complete all as specified and directed by Engineer-in-Charge. | 80 | Sqm | |
45 | 44 | M&L for preparation of old plastered wall surfaces and applying two coats of whitewash Complete all as specified and directed by Engineer-in-Charge. | 70 | Sqm | |
46 | 45 | M&L, two coats cement base paint including preparation of newly plastered surfaces.Complete all as specified and directed by Engineer-in-Charge. | 80 | Sqm | |
47 | 46 | M&L, One coats cement base paint including preparation of old plastered surfaces.Complete all as specified and directed by Engineer-in-Charge. | 70 | Sqm | |
48 | 47 | Demolition of cement concrete of any description and in any position .Complete all as specified and directed by Engineer-in-Charge. | 1 | Cum | |
49 | 48 | M&L, cement concrete 1:2:4 type B-1 using 20mm graded stone agg as in roof kerb or mud stops, rounded or chamfered on edges. Complete all as specified and directed by Engineer-in-Charge. | 1 | Cum | |
50 | 49 | S&F, in repair curtain rod made out of 25mm dia(outer dia )pipe having thickness 0.63mm , PVC coated and colour/pattern, over all dia 28 to 29 mm Complete all as specified and directed by Engineer-in-Charge. | 12 | RM | |
51 | 50 | S&F, plastic finial of 28 to 29mm bore, decorated type, of any colour/pattern, best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive Complete all as specified and directed by Engineer-in-Charge. | 20 | Each | |
52 | 51 | S&F, mild steel prepainted bracket to hold the curtain rod and fixed to wall(Concrete/brick masonry) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the disturbed surfaces Complete all as specified and directed by Engineer-in-Charge. | 20 | Each | |
53 | 52 | M&L, 100mm thick PCC 1:4:8 Type D-2 using 40mm crushed stone aggregate as in sub base floor.Complete all as specified and directed by Engineer-in-Charge. | 41 | Sqm | |
54 | 53 | M&L, 60mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-40 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand. Complete all as specified and directed by Engineer-in-Charge. | 41 | Sqm | |
55 | 54 | M&L, Sand filling under floors Complete all as specified and directed by Engineer-in-Charge. | 1.03 | Cum | |
56 | 55 | M&L, PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges.Complete all as specified and directed by Engineer-in-Charge. | 0.3 | Cum | |
57 | 56 | M&L, Non - skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.11 Sqm but n.exc. 0.18 Sqm, in floors, etc set and jointed in neat cement slury & pointed in coloured cement to match over a 15mm thick screed of CM 1:4.Complete all as specified and directed by Engineer-in-Charge. | 5 | Sqm | |
58 | 57 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar Complete all as specified and directed by Engineer-in-Charge. \n | 0.5 | X Sqm | |
59 | 58 | M&L, 20mm Granite (of any type) work (tabler rubbed and polished) in steps, jambs,pillars,window-cills, cooking platforms and like over 10mm thick rendering in CM 1:4, incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Complete all as specified and directed by Engineer-in-Charge. | 5 | Sqm | |
60 | 59 | Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises. | 35 | Sqm | |
61 | 60 | M&L, Glazed ceramic coloured tiles (350X250/450X350mm) x6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:3.Complete all as specified and directed by Engineer-in-Charge. | 35 | Sqm | |
62 | 61 | S&F, vitreous china urinal,half stall type, white with grating union and discharge pipe including brackets.Complete all as specified and directed by Engineer-in-Charge. | 1 | Each | |
63 | 62 | S&F, vitreous china wash basin with vitreous china padestel,white,flat back size 600 x480mm ,fixed on bracket incl 32mm bore CP waste coupling.Complete all as specified and directed by Engineer-in-Charge. | 1 | Each | |
64 | 63 | S&F in repairs vetrious chine ware valveless, syphonuc action type, low level flushing cistern, white with inlet, ball valve, float and handle including brackets.Complete all as specified and directed by Engineer-in-Charge. | 1 | Each | |
65 | 64 | S&F, bib taps fancy type chromium plated with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule.Complete all as specified and directed by Engineer-in-Charge. | 2 | Each | |
66 | 65 | S&F,20mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors.Complete all as specified and directed by Engineer-in-Charge. | 10 | RM | |
67 | 66 | S&F, 15mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.Complete all as specified and directed by Engineer-in-Charge. | 10 | RM | |
68 | 67 | S&F, bathroom mirror 600x450mm bevelled edge mirror selected qualtiy glass, 6mm thick AC board or commercial ply wood fixed to wooden ply with chromium plated brass screw and cup washers.Complete all as specified and directed by Engineer-in-Charge. | 1 | Each | |
69 | 68 | S&F, 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.Complete all as specified and directed by Engineer-in-Charge. | 2 | Each | |
70 | 69 | S&F, 20mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.Complete all as specified and directed by Engineer-in-Charge. | 1 | Each | |
71 | 70 | S&F, 75mm bore CI branch pieces with oval access door, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches Complete all as specified and directed by Engineer-in-Charge. | 1 | Each | |
72 | 71 | S&F, 75mm bore cast iron soil, waste and vent pipe, in any length with or without ears, with cement joints, laid in trenches or in floors.Complete all as specified and directed by Engineer-in-Charge. | 2 | RM | |
73 | 72 | S&F, Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing.Complete all as specified and directed by Engineer-in-Charge. | 2.5 | RM | |
74 | 73 | S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing. | 1.55 | Sqm | |
75 | 74 | Demolition of RCC work of any description and any position.Complete all as specified and directed by Engineer-in-Charge. | 0.5 | Cum | |
76 | 75 | M&L for RCC type A-1 (1:1.5:3) using 20mm graded aggregates for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.Complete all as specified and directed by Engineer-in-Charge. | 0.5 | Cum | |
77 | 76 | S&F, Mild steel TMT bar 10mm dia and above cut to length, bent to shape rquired including cranling , bending spirally for hooping for column , hooking ends and binding with mild steel wire not less than 0.9mm dia.Complete all as specified and directed by Engineer-in-Charge. | 40 | Kg | |
78 | 77 | S&F, Mild steel TMT bar 6mm to 8mm dia and over cut to length, bent to shape rquired including cranling , bending spirally for hooping for column , hooking ends and binding with mild steel wire not less than 0.9mm dia as specified.Complete all as specified and directed by Engineer-in-Charge. | 10 | Kg | |
79 | 78 | Use and waste rough finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.\n | 8 | Sqm | |
80 | 79 | S&F, Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium for frame, having Thk. 3 mm with one or more rebates incl. joining cleat for fixing etc. Complete all as specified and directed by Engineer-in-Charge. | 30 | Kg | |
81 | 80 | Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick sur-rounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse.Complete all as specified and directed by Engineer-in-Charge. | 5.55 | Sqm | |
82 | 81 | S&F of 12mm thick toughened float glass of suitable make MODI GUARD / SAINT GOAIN / ATUL in window counter with polish edges including cutting suitable size for conversation / transaction, all necessary fixing accessories such as clip/cleats etc. complete all as directed by\n Engineer-in-Charge. | 5.55 | Sqm | |
83 | 82 | S&F, of 18/19mm thk Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination and fixed with screws/approved adhesive to timber frame work Complete all as specified and directed by Engineer-in-Charge. | 25 | Sqm | |
84 | 83 | M&L of extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nail or approved adhesive to timber or frame work Complete all as specified and directed by Engineer-in-Charge. | 75 | RM | |
85 | 84 | S&F, of drawer 4-lever Brass lock grade-I size 65mm complete all as directed by Engineer-in-Charge. | 8 | Each | |
86 | 85 | S&F, of stainless steel drawer handle silver color , chrome finish of size 150mm including matched screw etc. complete all as directed by Engineer-in-Charge. | 16 | Each | |
87 | 86 | S&F, chromate steel with precision ball bearing Full extension drawer channel/slider/hinge of load carrying capacity 25 kg and size 16" with matching screw for fixing, complete all as directed by Engineer-in-Charge. | 24 | Each | |
88 | 87 | Sch 'A' Sec-II | |||
89 | 87.01 | Taking down carefully the point wiring (light, Fan, socket or power) complete, (incl fittings such as switches, sockets any type, ceiling roses, pandents, light fittings, etc for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. complete all as directed by Engineer-in-Charge. | 56 | Per Point | |
90 | 88 | Taking down Ceiling fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as directed by Engineer-in-Charge. | 6 | Each Job | |
91 | 89 | Refixing only ceiling fan and connecting up including provision sutiable of new down rod for ceiling fans,of cable from celling rose/ connector to fan complete all as directed by Engineer-in-Charge. | 6 | Each | |
92 | 90 | M &L Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend end caps etc complete concealed in walls/ceiling/roof/etc including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor fabricated steel terminal base made out of MS sheet concealed in walls with 3mm thick hylem sheet , ISI marked with chromium unplated screws and cup washers for housing the sockets outlets ,fan regulators etc incl with cutting of chases for conduit and sinking of boxes, all as specified and as directed for the following :- | |||
93 | 90.01 | One light/fan point controlled by one, one way switch | 39 | Per Point | |
94 | 90.02 | One switch socket outlet point 5 Amps on independent board | 25 | Per Point | |
95 | 90.03 | One 3 Pin socket outlet , 5 Amps on the same board with other switch | 4 | Per Point | |
96 | 91 | All as per item No.89 described here-in-before but with copper conductor cable FRLS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. | 13 | Per Point | |
97 | 92 | Supply and fix LED tube light fittings 1200 mm, 20W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20, oprating voltage range- 140-270, P.F- not less then 0.95, surge protection upto- 4Kv, IP20, THD shell be less then 10%, CCT- (k0)- 6500ANSI, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as directed by Engineer-in-Charge. \n | 14 | Each | |
98 | 93 | Supply and fix 36 W LED fittings 2'X2' slim panel with super bright LED and highly efficient light smoothing optics to deliver superior illumanation and energy saving complete all as directed by Engineer-in-Charge. \n | 4 | Each | |
99 | 94 | M & L, Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc all as specified and as directed.\nNote : 2 runs of 6 sqmm, 1 run of 6 sqmm earth conductor and 1 run of PVC conduit shall be measured as one unit length | 50 | RM | |
100 | 95 | M & L Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc complete all as directed by Engineer-in-Charge. \nNote : 2 runs of 4 sqmm, 1 run of 4 sqmm earth conductor and 1 run of PVC conduit shall be measured as one unit length | 45 | RM | |
101 | 96 | Supply and fix TPN MCB DB 4 ways 415 Volt, Double door type complete all as directed by Engineer-in-Charge. | 1 | Each | |
102 | 97 | S & F, MCB TPN 40 Amps, 10 KA, 50Hz ,415 Volts complete all as directed by Engineer-in-Charge. | 1 | Each | |
103 | 98 | Supply and fix SPN MCB DB 8 ways 240Volt, Double door type complete all as directed by Engineer-in-Charge. | 2 | Each | |
104 | 99 | S & F MCB SPN 6- 32 Amps, 10 KA , 50Hz, 240Volts complete all as directed by Engineer-in-Charge. | 5 | Each | |
105 | 100 | S & F SP MCB 6-32 Amps 10 KA , 50Hz ,240Volts complete all as directed by Engineer-in-Charge. | 18 | Each | |
106 | 101 | Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as directed by Engineer-in-Charge. | 39 | Each | |
107 | 102 | Supply and Fix Switch Piano,Flush type single pole , one way 5 Amp complete all as specified and as directed by Engr-in-charge | 64 | Each | |
108 | 103 | Supply and Fix Switch Piano,Flush type single pole , one way 15 Amp complete all as specified and as directed by Engr-in-charge | 5 | Each | |
109 | 104 | Supply and Fix Socket outlet 3 pin, 5 A flush Piano,Flush type complete all as directed by Engineer-in-Charge. | 9 | Each | |
110 | 105 | Supply and Fix Switch Socket combenation 2 in 1 outlet 3 pin, 5 A flush type complete all as directed by Engineer-in-Charge. | 20 | Each | |
111 | 106 | Supply and Fix Switch Socket combenation 2 in 1 outlet 3 pin, 16 A flush type complete all as directed by Engineer-in-Charge. | 13 | Each | |
112 | 107 | S&F, fan regulator , fulsh stapped type ,electronic ,230 V, AC complete all as directed by Engineer-in-Charge. | 6 | Each | |
113 | 108 | Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables 1100 volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core complete all as directed by Engineer-in-Charge. | 70 | RM | |
114 | 109 | Taking down of unservisable XLPE cable 25 X3.5 sq mm complete all as directed by Engineer-in-Charge. | 70 | RM | |
115 | 110 | Taking down of any size of bldy security light fittings complete all as directed by Engineer-in-Charge. | 4 | Each | |
116 | 111 | Supply and fixing LED street light fitting 30 watt made up of pressure die cast aluminium housing with potted Isolated driver and high power LED and individual lenses, operating range -90V to 340V AC. LED Life-1 Lac burning hours, Fixture should withstand 320V upto 48 Hrs, Auto Cut offf >320V & Restart, 440V Sustain upto 8 Hrs. External SPD-10K and 4KV inbuilt in driver, NABL Acreddited LM79 report, IP 66, complete all as directed by Engineer-in-Charge. \n | 4 | Each | |
117 | 112 | Excavation in trenches soft/ loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete all as directed by Engineer-in-Charge. | 15 | CUM | |
118 | 113 | Returning filling in including spreading leveling watering and well ramming in layers each not exceeding 25 cm thickness complete all as directed by Engineer-in-Charge. | 13 | CUM | |
119 | 114 | Removal of surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as directed by Engineer-in-Charge. | 2 | CUM | |
120 | 115 | M & L, Sand cushioning to UG cable with a layer of fine sand 8 Cms thick before laying of cable and 15 Cms thick after laying of cable in trenches complete all as directed by Engineer-in-Charge. Note:- Thickness of 18cm after punning shall be consider for payment. | 4.5 | CUM | |
121 | 116 | M & L Old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as directed by Engineer-in-Charge. | 0.5 | 1000 Nos | |
122 | 117 | M &L, galvanised iron tubes of size 40mm bore for protection of cable (light grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as directed by Engineer-in-Charge. | 10 | RM | |
123 | 118 | Supply and fix SPN MCB DB 4 ways 415 Volt, Double door type complete all as directed by Engineer-in-Charge. | 1 | Each | |
124 | 119 | S&F , 20W LED lighting fixture (4 ft) with co extruded polycarbonate and cover the LED with 120 degree view angle , energy efficeint including rod / tube and connection from ceiling rose to connector complete with all accessories internally pre-wired and including taking out existing light fittings complete all as directed by Engineer-in-Charge. | 10 | Each | |
125 | 120 | M &L, Earthing complete including earth work with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner. | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail