Military Engineer Services-MES has published Provision Of Footpath And Toilet Block At New Lounge Area Il Ground Thoise Under Ge Partapur. Submission Date for this Tender is 12-10-2020. Footpath Work Tenders in GE PARTAPUR Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Name of Work: PROVN OF FOOTPATH AND TOILET BLOCK AT NEW LOUNGE AREA IL GROUND THOISE UNDER GE PARTAPUR | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Surface dressing not exceeding 15cm deep and getting out in any type of soil. | BI01010001010000000000000515BI0100001113 | 24 | Square metre |
2 | 2 | Exacavation in trenches n exc. 1.5 m wide and n exc. 1.5 m depth for foundation ,etc n exc 10 sqm on plan in hard and dense soil and getting out | BI01010001010000000000000515BI0100001114 | 8.29 | Cubic metre |
3 | 3 | PCC in foundation Type D2 1:4:8 (40 mm graded aggregate) complete all as specified and driected. | BI01010001010000000000000515BI0100001115 | 1.52 | Cubic metre |
4 | 4 | Precast cement concrete block masonry with solid blocks exc 10 cm in width and set in cm 1:6, type C1 1:3:6 (20 mm graded aggregate). | BI01010001010000000000000515BI0100001116 | 15 | Cubic metre |
5 | 5 | Cement Concrete 1:1.5:3 ,nominal mix (20mm graded stone agg) in Foundations, including rafts, footings, foundation beams; plinth beams;bases for columns, etc.; basement slabs, under-reamed piles and mass concrete | 1.5 | Cubic metre | |
6 | 6 | Cement Concrete 1:1.5:3 ,nominal mix (20mm graded stone agg) in beams, cantilevers, bressummers, lintels over 1.5m span all as specified. | 2 | Cubic metre | |
7 | 7 | Use & waste of formwork, rough finished flat concrete fdn, footings , bases of coloumn , raft and raft beams , sides and soffits (if any) of foundations and plinth beams and similar works, verical or to batter complete all as specified and directed. | 12 | Square metre | |
8 | 8 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. | 16 | Square metre | |
9 | 9 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips | 150 | Kilogram | |
10 | 10 | Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders | 80 | Kilogram | |
11 | 11 | M&L for rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement . | 81 | Square metre | |
12 | 12 | M&L for rendering 10 mm thick cement plaster with cement mortar(1:6)on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement. | 50 | Square metre | |
13 | 13 | M&L preparing new surfaces, plastered or unplastered walls and applying two coats of cement base paints over one coat of white wash all as specified and directed. | 81 | Square metre | |
14 | 14 | M&L preparing new surfaces, plastered or unplastered walls and applying two coats of oil bound distember over a coat of primer | 50 | Square metre | |
15 | 15 | M&L for Hardcore of gauge n exc. 63mm deposited, spread and leveled in layers n exc. 15 cm thick watered and rammed to a true surface with broken stone or boulders. | 54.7 | Cubic metre | |
16 | 16 | M&L for 100 mm cement concrete type-B2 using (20mm graded stone aggregate) 1:2:4 as in flooring 100mm thick. | 13.1 | Square metre | |
17 | 17 | M&L for 15mm thick screed bed in CM 1:6 for receiving floor finish. | 13.1 | Square metre | |
18 | 18 | S&F coloured non skid ceramic tiles (square/rectangular) area of each tile exceeding 0.06 Sqm but n.exc 0.11 Sqm,in floors set and jointedin neat cement slurry and pointed in coloured cement to match over all as specified. | 13.1 | Square metre | |
19 | 19 | S&F Glazed ceramic tiles Coloured and size of tiles450x350x7mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified. | 14 | Square metre | |
20 | 20 | S & F 2nd class hardwood Plain, solid, straight chowkhat and frames, wrought, framed rebated on solid, rounded or chamfered,put together with glue pinned at joints, all as specified and directed. | 0.72 | Cubic metre | |
21 | 21 | S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides complete all as specified | 3.78 | Square metre | |
22 | 22 | S&F 25mm thick Glazed and skeleton shutters,1st class softwood open rebated and prepared to receive glass, gauze, etc. but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8 clause 8.24(b | 2.3 | Square metre | |
23 | 23 | M&L Preparation of untreated wooden surfaces, two coats of synthatic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete. | 7.3 | Square metre | |
24 | 24 | M&L 3mm Figured glass, pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pane(figured glass). | 2 | Square metre | |
25 | 25 | S & F butt hinges 100 mm, medium weight, cold rolled mild steel complete all as specified | 6 | Each | |
26 | 26 | S & F butt hinges 75 mm, medium weight, cold rolled mild steel complete all as specified . | BI01010001010000000000000515BI0100001117 | 8 | Each |
27 | 27 | S & F 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified. | BI01010001010000000000000515BI0100001118 | 12 | Each |
28 | 28 | S&F 250 mm Aluminium alloy, anodised, sliding door boltwith hasp and stapple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed | 1 | Each | |
29 | 29 | S & F Aluminium alloy, anodised, sliding door bolt (150mm) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. | 1 | Each | |
30 | 30 | S&F 150mm Extruded aluminium alloy handles, fabricated type. Anodised. | 2 | Each | |
31 | 31 | S&F 100mm Extruded aluminium alloy handles, fabricated type. Anodised. | 8 | Each | |
32 | 32 | S&F vitreous china wash basin, white, flat back, size 550x400 mm including brackets, cutting pinnning in ends of brackets or erecting stand but exclusive of fixing, complete assembled all as specified and directed. | 1 | Each | |
33 | 33 | S&F, Vitreous china bowl urinal flat back, size of 465 X 355 X 265 mm white, with grating and union for discharge pipe incl 5ltr automatic flushing cistern with bracket, flush pipe and waste pipe fixed in repair , complete all as specified and directed by Engr-in-charge. | 2 | Each | |
34 | 34 | S&F 32mm bore waste coupling of PTMT (Half or full threaded) (min weight 32mm-45gms/40mm-60gms) as specified and directed | 1 | Each | |
35 | 35 | S&F 15mm pillar taps fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and | 1 | Each | |
36 | 36 | S&F, PVC connection of 15 mm sixe with PTMT nuts of length 450 mm , complete all as specified and directed by Engr-in-charge. | 3 | Each | |
37 | 37 | S&F 15mm Stop valves, fency type, chromium plated, long shank screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. | 3 | Each | |
38 | 38 | S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement . | 3 | Each | |
39 | 39 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. | 1 | Each | |
40 | 40 | S&F CP Towel rail 20 mm dia, D type 60 cm long. | 1 | Each | |
41 | 41 | S&F 25mm outer diameter 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. | 4 | Running Metre | |
42 | 42 | S&F 20mm outer diameter 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. | 2.5 | Running Metre | |
43 | 43 | S&F Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc, complete all as specified and as directed by Engineer-in-Charge. | 1 | Each | |
44 | 44 | S&F 20 mm ball valve high pressure of PTMT with eppoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ,( min wt 210 gms). | 1 | Each | |
45 | 45 | S&F 30cm long hold fast conforming to Fe.290. Gde-E-165 of Sectiion 25x6 mm. | 0.5 | Kilogram | |
46 | 46 | M & L salt glazed stoneware gully traps square or round mouthed type 150mm x 150mm with all excavation and earth work, concrete bed, surrounds, kerbs etc. and cast iron grating including setting & joining through drain pipe in CM 1:2 all as specified. | 1 | Each | |
47 | 47 | S&F 25mm bore gun metal, globe or gate valve, with iron wheel head screwed both ends fore iron pipes fixed complete. | 2 | Each | |
48 | 48 | Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight). | 24 | Square metre | |
49 | 49 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm in hard and dense soil. | 2.62 | Cubic metre | |
50 | 50 | Removing of excavated material n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point. | 5.67 | Cubic metre | |
51 | 51 | S&F Fe-410-W (Gde-E-250) quality B Roof trusses (framed), trussed, purlin, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by the Engr-in-charge. | 50 | Kilogram | |
52 | 52 | S&F 0.63mm thick of CGI sheets with two corrugations side lap fixed with L type or J type or crank hook bolts in lieu of screw complete all as specified and directed. | 16 | Square metre | |
53 | 53 | Surface excavation not exc 30 cm depth and avereging 18 cm depth and getting out in hard/dense soil. | 532 | Square metre | |
54 | 54 | Removing excavated material soil exc 250 m but n exc 500m and depositing where directed at a level n.exc 1.5 m above the starting point | 95.76 | Cubic metre | |
55 | 55 | M&L P.C.C (1:4:8) type D-2, 75mm thick in sub base for floor.\n | 532 | Square metre | |
56 | 56 | M & L 20 mm thick sand filling under floors or in foundation including watering and consolidation all as specified and directed. | 8.5 | Cubic metre | |
57 | 57 | M & L machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS 15658 - 2006 of 60 mm thickness , M-35 grade all as specified and directed. | 532 | Square metre | |
58 | 58 | M & L cement concrete 1:2:4 type B-0 (12.5 mm graded aggregate ) in kerbs or mud stops, rounded or chamfered on edges all as specifed. | 7.2 | Cubic metre | |
59 | 59 | Plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes incl packing under and hauching against the side of pipes after they are laid and tested for 150mm bore SGSW pipes complete\nNote-(i) Thickness of concrete bed shall be 100mm.\n(ii) The payment of concrete hauching for the portion over offset of the manhole shall be paid under respective Item below. | 22 | Running Metre | |
60 | 60 | S&F 150mm dia SGSW pipe laid in trenches and jointed as specified | 24 | Running Metre | |
61 | 61 | S&F 100mm dia cast iron soil, waste and vent pipes in any length as specified. | 4 | Running Metre | |
62 | 62 | M&L Point wiring with 1.5sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts cable and including PVC casing and caping suitable size (as per conductor run) with all fittings and accessories and including PVC insulated, un sheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core green colour) cable as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated sheet (Make Hylum) for one light point /fan point / bell point etc controlled by one, one way switch. Complete all as specified and directed by Engineer-in-Charge. | 6 | Per point | |
63 | 63 | Description all as per item no 62 here in before but one 3 pin socket out let 5 Amps on same board. | 2 | Per point | |
64 | 64 | S&F switch piano flush type single pole one way 5 Amps. Complete all as specified and directed by Engineer-in-Charge. | 8 | Each | |
65 | 65 | M&L point wiring for power point with 4 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through rigid PVC casing capping of suitable size (ISI Marked) (Make - Hylum) including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes with 3.0mm thick plastic laminated sheet cover (Make - Hylum) for 6 pin/5pin socket outlet. 15 Amp on independent board with 4 sqmm (nominal area) FRLS copper conductor cable (multi-stranded) PVC insulated and unsheathed (green Colour) with colour code earth wire to common eart dolly. Complete all as specified and directed by Engineer-in-Charge. | 2 | Per point | |
66 | 66 | S&F switch socket combination 5 pin, 15 Amps 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug. Complete all as specified and directed by Engineer-in-Chage. | 2 | Each | |
67 | 67 | S&F switch socket combination 5 pin, 5 Amps 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug. Complete all as specified and directed by Engineer-in-Chage. | 2 | Each | |
68 | 68 | S&F ceiling rose surface bakelite 65x50mm two to three therminal conforming to ISI. Complete all as specified ans as directed by Engineer-in-Charge. | 6 | Each | |
69 | 69 | S & F surface and wall mounted LED batten lumiline with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed by Engr-in-Charge. Make: Havells cat part No LUMILINEBS20WLED865SPCWH or its equivalent in philips, bajaj, syska, surya | 6 | Each | |
70 | 70 | S&F sheet metal enclosures (factory made) double door for distribution oard (when MCSs are to be used) single pole and neutral 240 volts 8 ways with 200 Amps rated busbar conforming to ISI. Complete all as specified and directed by Engineer-in-Charge. | 1 | Each | |
71 | 71 | M&L 6 to 40 Amps MCB SP ( ISI Marked) 50 C/S 10 KA 'C' sereis complete all as specified. | 4 | Each | |
72 | 72 | S&F MCB 40 Amp SPN 50 C/S 10 KA 'C' sereis complete all as specified all as directed | 1 | Each | |
73 | 73 | Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2..25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below the normal ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering all as shown in electrc plate No 5 connected to earth test point. 40mm thick pre cast RCC M-15 ( Nominal mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40X40X3mm frame for cover, PCC chamber in cement concrete M-15 ( Nominal mix) , excavation and earth work in any type of soil and connected all as specified and as directed by Engineer-in-charge. | 1 | Each Set |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail