}

Tender For Three Face Climbing Wall At Rpa Jaipur As Per Tender Documents, RPA Jaipur-Rajasthan

Police Department-PD has published Tender For Three Face Climbing Wall At Rpa Jaipur As Per Tender Documents. Submission Date for this Tender is 30-09-2020. Bolts Tenders in RPA Jaipur Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

25459612
Tender For Three Face Climbing Wall At Rpa Jaipur As Per Tender Documents
National Competitive Bid
Indian
Rajasthan
RPA Jaipur
30-09-2020

Tender Details

Tender For Three Face Climbing Wall At Rpa Jaipur As Per Tender Documents , A-Schedule Items , Earth Work Excavation In Foundation Trenches Etc . In Soft Soils , Net Excavation 2 . 0M Dept Including Dressing Bottom And Sides Of Trenches Stacking The Excavated Soil Clear From The Edge Of Excavation Subsequent Filling Around Compaties , Including Indiposal Of All Surplus Soil As Directed With In A Load 0 . 30 M , Coment Conc 1:4:8 With Stone Aggregate 20Mm Nominal Size In Foundation And Plinth , Coment Conc 1:1 , 5:3 With Stone Aggregate 20Mm Nominal Size For Reinfored Concrete Work For Walls Exceeding 20Cm Thickness ( Straight And Curved ) Beams , Girders , Stairs , Columns ( Square Or Rectangular ) Battens And Lintels Etc . Excluding Steel Reinforcement But Including Centering And Shuttering , Laid In Position , Complete In All Respect . , First Class Brick Work Laid In Cement Sand Mortar 1:4 In Foundation And Plinth . , 12Mm Thick Cement Plaster 1:4 , Refilling Of Excavated Earth In Layers Of 15Cm And Considatin , Filling Of Sand In Sand Pit , Structural Steel Work In Compound Girders Or Stanchlons Built Up From Two Or More R . S . Joists Or Channel Section Or Plates , Angle Etc . Welded Including Cuttiong And Fixing All Lattice Bars , Stiffiners , Gusset Plates , Bolts , Buts , Welding Road Etc Completed With Flanges Plates , Head , Sole , Plates , Angle Connections Etc With Hoisting And Erecting In . , Supplying Of Ms Bolts Round Holding Down Of Anchor Boltsds With Nuts And Washer Plates Complete , Fe 500 Eqr Tmt Steel Bars For R . C . C . Works , Where Not Included In The Complete Rate Of R . C . C Including Bending , Blnding And Placing In Position Complete . , Providing And Fixing M . S . Chequered Plates 5Mm Thick ( As Per Drawing ) , Designing Providing & Fixing Polyester Resin Fibre Glass Reinforced 3D /2D Panel ( Indian ) With Minimum 6Mm Thickness At Center & 10 Mm At Flanges . 3D Panels Are Modular In Shapes And 2 D Panels Are Flat In Shapes . Panels Shall Have Provision Of Insert Holes @ Minimum Four Nos Per Square Meter For Fixing Holds Arrangement For Fixing Holders / Protection Points Belay Points And Arrangement At Top For Fixing Security ( Chain Anchors ) At Top The Panels Should Be Able To Withstand Climbers Weight , Weather Proof For Outdoor Use And Meet Norms As Per Climbing . Standards . The Penal Will Have Sand Finish On One Side With Slight Abrasion On Climbing Side . Overhang And Other Standard Should Be As Per Drawing And As Directed By Designer . Wall Should Be So Designed That It Can Be Used For Multipurpose Training Such As Begineer / Intermediate Level And Climbing Competition . Aprox Climbing Area Is App . 132Sqm . Having Minimum 50% Of 3D Panels Surface ( With Side Covering For 3D Wall ) , Supply And Fixing Top Chaun Anchors , Providing And Fixing Imported Climbing Movable Holds Of Brand Enterprises France , Rope Dynamic ( 10-10 . 5Mm . , Flgure Of Eight ( Belay Device ) , Seat Harness , Gri-Gri , Seraw Carabiner , Quickdraw

Key Value

Document Fees
INR 500 /-
EMD
INR 30890.0 /-
Tender Value
INR 30.89 Lakhs /-

BOQ Items

Name of Work : Three Face Climbing Wall
Sl. No. Name of Item with Brief Description Item Code/No. Quantity Units
1 1 A-Schedule Items
2 2 Earth work excavation in foundation trenches etc. in soft soils ,net excavation 2.0M dept including dressing bottom and sides of trenches stacking the excavated soil clear from the edge of excavation subsequent filling around compaties , including indiposal of all surplus soil as directed with in a load 0.30 M Item1 71.9 CUM
3 3 Coment conc 1:4:8 with stone aggregate 20mm nominal size in foundation and plinth Item2 5.139 CUM
4 4 Coment conc 1:1,5:3 with stone aggregate 20mm nominal size for reinfored concrete work for walls exceeding 20cm thickness ( straight and curved )beams , girders , stairs , columns ( square or rectangular )battens and lintels etc. excluding steel reinforcement but including centering and shuttering , laid in position , complete in all respect. Item3 13.57 CUM
5 5 First class brick work laid in cement sand mortar 1:4 in foundation and plinth. Item4 6.05 CUM
6 6 12mm thick cement plaster 1:4 Item5 20.75 CUM
7 7 Refilling of excavated earth in layers of 15cm and considatin Item6 62.9 CUM
8 8 Filling of sand in sand pit Item7 25 CUM
9 9 Structural steel work in compound girders or stanchlons built up from two or more R.S. joists or channel section or plates, angle etc. welded including cuttiong and fixing all lattice bars, stiffiners , gusset plates,bolts , buts, welding road etc completed with flanges plates, head , sole , plates, angle connections etc with hoisting and erecting In. Item8 6511.4 Kg
10 10 Supplying of MS bolts round holding down of anchor boltsds with nuts and washer plates complete Item9 58 Kg
11 11 FE 500 EQR TMT Steel bars for R.C.C. Works, where not included in the complete rate of R.C.C including bending ,blnding and placing in position complete . Item10 1013.41 Kg
12 12 Providing and fixing M.S. chequered plates 5mm thick (as per drawing ) Item11 1606 Kg
13 13 Designing providing & fixing polyester resin fibre glass reinforced 3D /2D panel (Indian) with minimum 6mm thickness at center & 10 mm at flanges. 3D panels are modular in shapes and 2 D panels are flat in shapes. Panels shall have provision of insert holes @ minimum four nos per square meter for fixing holds arrangement for fixing holders / protection points belay points and arrangement at top for fixing security (chain anchors) at top the panels should be able to withstand climbers weight, weather proof for outdoor use and meet norms as per climbing. Standards. The penal will have sand finish on one side with slight abrasion on climbing side. Overhang and other standard should be as per drawing and as directed by designer. Wall should be so designed that it can be used for multipurpose training such as begineer / intermediate level and climbing competition. Aprox climbing area is APP. 132sqm. Having minimum 50% of 3D panels surface (with side covering for 3D wall) Item12 132 SQM
14 14 Supply and fixing top chaun anchors Item13 6 Nos
15 15 Providing and fixing imported climbing movable holds of brand enterprises france Item14 250 Nos
16 16 Rope dynamic (10-10.5mm. Item15 300 Mtr.
17 17 Flgure of eight ( belay device ) Item16 5 Nos
18 18 Seat harness Item17 10 Nos
19 19 Gri-gri Item18 3 Nos
20 20 Seraw carabiner Item19 10 Nos
21 21 Quickdraw Item20 15 Nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail