}

Completion Of Incomplete Works For Special Repairs To Building No . P-193 , Basket Ball Ground , Provision Of Jafri , Tiling , Additional/ Alteration To Building No . T-7/3 And Certain Sanctioned Works At Ratnuchak Mil Stn Under Ge Kaluchak, Kaluchak-Jammu And Kashmir

Military Engineer Services-MES has published Completion Of Incomplete Works For Special Repairs To Building No . P-193 , Basket Ball Ground , Provision Of Jafri , Tiling , Additional/ Alteration To Building No . T-7/3 And Certain Sanctioned Works At Ratnuchak Mil Stn Under Ge Kaluchak. Submission Date for this Tender is 27-08-2020. Building Repair Tenders in Kaluchak Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

25113299
Completion Of Incomplete Works For Special Repairs To Building No . P-193 , Basket Ball Ground , Provision Of Jafri , Tiling , Additional/ Alteration To Building No . T-7/3 And Certain Sanctioned Works At Ratnuchak Mil Stn Under Ge Kaluchak
Open Tender
Indian
Jammu And Kashmir
Kaluchak
27-08-2020

Tender Details

Completion Of Incomplete Works For Special Repairs To Building No . P-193 , Basket Ball Ground , Provision Of Jafri , Tiling , Additional / Alteration To Building No . T-7 / 3 And Certain Sanctioned Works At Ratnuchak Mil Stn Under Ge Kaluchak

Key Value

Document Fees
INR 500 /-
EMD
INR 17800.0 /-
Tender Value
INR 8.90 Lakhs /-

BOQ Items

Name of Work : COMPLETION OF INCOMPLETE WORKS FOR SPECIAL REPAIRS TO BUILDING NO. P-193, BASKET BALL GROUND, PROVN OF JAFRI, TILING, ADDN/ ALTERATION TO BUILDING NO. T-7/3 AND CERTAIN SANCTIONED WORKS AT RATNUCHAK MIL STN UNDER GE KALUCHAK
Sl. No. Item Description Item Code / Make Quantity Units
1 0.1 B/R Portion BI01010001010000000000000515BI0100001112
2 1 Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed. 43 Cubic Metre
3 2 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed. 17 Cubic Metre
4 3 Removing excavated soils exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. 61.49 Cubic Metre
5 4 Cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. 15.75 Cubic Metre
6 5 Demolition of brick work masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and as directed. 10 Cubic Metre
7 6 Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and directed. 37 Cubic Metre
8 7 Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete, but except brick, i.e. using serviceable bricks obtained from demolition, complete all as specified and as directed. 1.5 Cubic Metre
9 8 Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, all as specified. 6 Square Metre
10 9 Plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in cills, lintels upto 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed. 1.34 Cubic Metre
11 10 Precast cement concrete louvres and jallies, type B-0 1:2:4 (using 12.5mm graded crushed stone aggregates) 25mm thick (measured solid), including all mouldings and setting in cement mortar 1:3 complete all as specified and as directed.\nNote : Sample of louvers and jallies shall be approved by GE. 150 Square Metre
12 11 RCC 1:2:4 (Nominal mix) Type B-1 (using 20mm graded crushed stone aggregate ) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. 0.75 Cubic Metre
13 12 RCC 1:2:4 (Nominal mix) Type B-1 (using 20mm graded crushed stone aggregate ) as in slabs supported on walls, beams, lintel bands and in columns in floors or roofs, landings, balconies and in shelves and the like complete all as specified and as directed. 1.75 Cubic Metre
14 13 Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish flat surfaces of concrete, complete, all as specified and as directed. 8 Square Metre
15 14 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finish flat surfaces of concrete, complete, all as specified and as directed. 13 Square Metre
16 15 Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm rough finish surfaces of concrete, complete, all as specified and as directed. 13 Running Metre
17 16 TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and as directed. 200 Kilogram
18 17 TMT bars 5mm dia and over upto and including 10mm dia, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90mm as in stirrups, spacers and binders, complete, all as specified and as directed. 50 Kilogram
19 18 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed. 69.19 Square Metre
20 19 Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. 549.6 Square Metre
21 20 Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, using water proofing compound, finished even and smooth with out using extra cement, complete all as specified and directed. 280 Square Metre
22 21 Rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed. 345 Square Metre
23 22 Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified and directed. 126 Square Metre
24 23 Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed. 0.59 Cubic Metre
25 24 75mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed.\nNote : The concrete shall be laid at a stretch not exceeding 3.0 m in length and joint shall be made at every turning / corners, complete all as specified and directed. 35 Square Metre
26 25 75mm thick cement concrete type C-2 1:3:6 (using 20mm graded crushed stone aggregate) as in floor, Path, hardstanding etc finished even rough complete all as specified and directed. 44.52 Square Metre
27 26 50mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in flooring etc including brushing neat cement slurry 3.00 kg cement per Sqm finishing surface even and smooth without using extra cement complete as specified and directed.\n 26.72 Square Metre
28 27 40mm thick, plain cement concrete 1:2:4, type b-1 (using 20mm graded crushed stone aggregate) as in flooring etc., finishing surface even and smooth without using extra cement complete as specified and directed.\n 20 Square Metre
29 28 Glass dividing strips, 38mm x 1.5 mm thick and fixed in position to confirm to design, complete all as specified and directed. 10 Running Metre
30 29 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. 25 Square Metre
31 30 25mm thick PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate) as in sub-base, finished even and fair, to receive tiles, complete all as specified and as directed. 5 Square Metre
32 31 Non-skid coloured ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 300mm x 300mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed. 13 Square Metre
33 32 Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more diffrent colour tiles etc.) in vertical surfaces of size 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed. 32 Square Metre
34 33 Non-skid coloured ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 400mm x 400mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed. 6 Square Metre
35 34 All as per Serial Item No. 33 here in before but on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile complete all as specified and directed. 5 Square Metre
36 35 18mm to 20mm thick of size not less than 53 x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed. 80 Square Metre
37 36 16mm to 18mm thick, machine cut Kota stone as in riser or steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and rounding off edges complete with mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:3 all as specified and as directed. 8 Square Metre
38 37 Factory made precast concrete designer paver tiles any colour, shape and size not less then 300mm x 300mm x 20mm thickness, M-25 grade pointed with grey cement and pigment over and including 15mm thick CM 1:6 screed bed or bedding layer complete all as specified and directed. 17.8 Square Metre
39 38 Taking down chowkhats with shutters (without taking off shutter from the frames) not exceeding 1.50 Sqm each, removing from site and making good the disturbed surfaces with cement sand mortar complete all as specified and directed. 8 Each
40 39 Taking down chowkhats with shutters (without taking off shutter from the frames) exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, removing from site and making good the disturbed surfaces with cement sand mortar complete all as specified and directed. 8 Each
41 40 Taking down shutters not exceeding 1 Sqm each and refixing in the same opening complete all as specified and as directed. 1 Per Leaf
42 41 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete as specified and directed. 5 Square Metre
43 42 2nd Class hard wood, 35mm thick, glazed and skeleton shutter, open rebated and prepared to receive glass, gauze, etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., for doors, etc. are provided with stiles and rails as specified in SSR Part I Section 8, clause 8.24 (a) complete all as specified and directed. 5 Square Metre
44 43 Steel windows with side hung shutters box type hinges with steel handle of 100mm and steel peg stay, complete with glazing bars, and including MS guard bars and grills made out of 10mm MS square bar (Grill and guard bars shall be provided as per directions of Engr-in- Charge during execution of work) dovetailed or welded complete all as specified and directed.\nNotes :\n1. The inside shutters shall be suitable for fixing wire mesh and outside shutters for fixing glass panes.\n2. The Wire mesh & glass panes shall be measured and paid separately.\n3. The design and pattern of the shutter shall be provided as per direction of Engr in Charge. No extra payment shall be made in this regard.\n4. Steel window with frame, double shutters, connected items as per description of item shall be measured and paid as one unit. \n 5 Square Metre
45 44 All as per item No. 43 Here-in-before but without glazing bars. 5 Square Metre
46 45 Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed. 1 Square Metre
47 46 Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening etc., complete as specified and directed. 18.5 Running Metre
48 47 Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification in SSR Part-I. 5.35 Square Metre
49 48 Aluminium anodized frame (for door) of size 101.60mm x 44.45mm made out of 1.60mm thick aluminium section, powder coated, fixed to floor wall with plugs and screws complete all as specified and directed. 9.9 Running Metre
50 49 Aluminium anodized frame (for window / cupboards) of size 67.60mm x 44.45mm made out of 1.60mm thick aluminium section, powder coated, fixed to floor wall with plugs and screws complete all as specified and directed. 25 Running Metre
51 50 Aluminium powder coated door shutter, rails (top, middle and style ) of size 82.53 x 44.45mm and bottom rail of size 114.30 x 44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, mortice lock having six levers, aluminium body hydraulic door closer of suitable size, handles 2 No's in each shutter, tower bolt, hinges etc., anodised aluminium snap beading screws, complete all as specified. 3.2 Square Metre
52 51 Aluminium anodised powder coated window/ventilator shutter, section of size 44.45 x 44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, suitable handle 1 No's in each shutter, tower bolt, hinges 110mm long, anodised aluminium snap beading screws, complete all as specified and directed.\nNote : Sheet glass to be fitted will be measured and paid separately. 5.5 Square Metre
53 52 PVC hollow profile 12mm thickness design and pattern as approved / directed at site, complete all as specified and directed. 4 Square Metre
54 53 5mm thick glass as in aluminium door and window with aluminium hollow beading/glazing clip size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket, complete all as specified and directed. 3.75 Square Metre
55 54 Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. 5 Each
56 55 Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 200mm long complete all as specified and directed. 28 Each
57 56 Aluminium handle cast type anodized of size 150mm complete all as specified and directed. 30 Each
58 57 3.00mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. 4.8 Square Metre
59 58 Galvanised steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tank or galvanized wire staple complete, all as specified and as directed. 8 Square Metre
60 59 Preparation of the concrete roof surfaces by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and applying the following Roof Treatment complete all as directed :-\n(a) Applying 1st course of 15mm thick screed bed with cement mortar 1:4 over concrete surface.\n(b) Applying 2nd course of bitumenous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed.\n(c) Applying 3rd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. 80 Square Metre
61 59.5 (d) Applying 4th course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kilogram/Square Metre with 160 Grams/Square Metre non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat.\n(e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kilogram/Square Metre.\n(f) Applying two coats of aluminium paint over APP membrane complete all as specified and as directed.
62 60 PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) with average thickness 50mm laid in two layers of 25mm thickness each with wire netting of 0.60mm dia and size of mesh 12mm x 12mm laid between the two layers finished even and smooth as in roof padding all as specified and as directed. \nNotes : \n1. The wire mesh shall be measured and paid separately under respective item. \n 80 Square Metre
63 61 Cleaning of surface of RCC Chajjas / Fin with wire brush, washing with clean water, taking down cement plastering of any thickness upto 06 mtr height of roof surfaces / external surfaces of chajjas portion and applying dubbing coat of plaster of required thickness in CM 1:3 and plastering 15mm thick in CM 1:4 and applying two coats of acrylic cementious brush applied water proof coating with dry film of approximate thickness 1mm (Make Dr Fixit Pidilite 2K or equivalent product of M/S Chemistek, M/S Prima etc) complete, all as manufacturer's instruction all as specified and directed. 25 Square Metre
64 62 Dismantling RCC /PVC water tanks exceeding 500 ltr capacity but not exceeding 1000ltrs complete all as specified and directed. 2 Each
65 63 Rotational moulded polyethylene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity complete all as specified and directed. 3 Each
66 64 Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 15mm bore dia of pipe (Minimum weight 142gms) in repairs complete all as specified and directed. 3 Each
67 65 Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed. 25 Running Metre
68 66 Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed. 41 Running Metre
69 67 Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed. 2 Running Metre
70 68 Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed. 11 Running Metre
71 69 Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed. 14 Running Metre
72 70 Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 20mm dia complete all as specified and as directed. 1 Running Metre
73 71 Vitreous china Orissa pan of pattern, long pan size 580mm x 440mm, with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe, fixed in repairs complete all as specified and directed. 1 Each
74 72 Vitreous china wash down water closet pan (pedestal pattern) white, including ‘P’ or ‘S’ trap, white seat cover with flat bottom and mild steel CP hinging device, CP brass jet nozzle with 1500 mm long PVC pipe, complete all as specified and directed. \n 1 Each
75 73 10 litres capacity PVC low level flush cistern of approved make complete with PVC flush pipe and connection to water closet fixed in repairs complete all as specified and directed. 2 Each
76 74 PVC connection 45cm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, complete all as specified and directed. 9 Each
77 75 Vitreous china waterless (Aquafree) star white urinal with cartridge Half stall flat back complete with all accessories including CP spreader, PVC connection etc. Complete including providing and fixing plugs, bedding urinal gaginst wall in cement mortar 1:2, securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in white cement complete all as specified and as directed.\nMake : Hindware Cat Part No 60017 or equivalent in Neycer Kermag / Parryware. 1 Each
78 76 Vitreous china wash hand basin with pedestal, oval shape, coloured, size 520mm x 400mm fixed in black granite stone slab, including cutting of size in granite, moulding of edges, including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, complete all as specified and as directed. 2 Each
79 77 Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 15cm wide with chromium plated bracket guard and railing, 60cm long, complete all as specified and directed. \n 1 Each
80 78 Box type toilet paper holder, brass chromium plated complete all as specified and as directed. \nMake : Jaqauar Cat Part No AHS-1533 or equivalent in Marc / Plumber. 1 Each
81 79 Towel rail, brass chromium plated, 20 mm dia, D type, 60 cm long between hinges, complete all as specified and directed. \nMake : Jaquar Cat Part No ACN1111NM or equivalent in Marc / Plumber. 1 Each
82 80 Soap Dish Chromium plated complete all as specified and directed. 1 Each
83 81 Chromium plated grating 100mm dia complete all as specified and directed. 1 Each
84 82 Bib tap cast copper alloy CP fancy type, with capstan headed handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed. Make : CAT Part No. QT7037 of Jaquar or equivalent in Merc /Plumber. 6 Each
85 83 Angle valve CP cast copper alloy, fancy type, with capstan head handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed. Make : CAT Part No. SOL-CHR-6053 of Jaquar or equivalent in Merc /Plumber. 14 Each
86 84 Stop valve CP cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 20mm bore iron pipe or for unions complete all as specified and directed. 3 Each
87 85 Stop valve chromium plated fancy type cast copper alloy with long shank and cup (concealed type) screwed down, high pressure with capstan headed handle, screwed both ends for iron pipe or for unions of 15mm bore fixed in repair complete all as specified and as directed. Make : Marc / Plumber 3 Each
88 86 Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, long screwed for iron pipe 15mm bore and fixed in repair complete all as specified and directed. 1 Each
89 87 Brass chromium plated wash hand basin mixer, for mixing hot & cold water, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions and fixed complete, all as specified. 1 Each
90 88 Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union S&F in repair, complete all as specified and directed. 1 Each
91 89 Looking mirror 600mm x 450mm x 5mm bevelled edge mirror of selected quality glass 5mm thick mounted on 2-3mm thick PVC Sheet with CP brass screws and cup washers etc., fixed in repairs, complete all as specified and directed. \nNote : Make and sample as approved by GE. 2 Each
92 90 PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed. 1.8 Running Metre
93 91 PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed. 3.6 Running Metre
94 92 PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. 1.8 Running Metre
95 93 PVC (SWR) bends 110mm, complete all as specified and directed. 2 Each
96 94 PVC (SWR) bends 75mm, complete all as specified and directed. 3 Each
97 95 PVC (SWR) vent cowl 75mm, complete all as specified and directed. 1 Each
98 96 PVC (SWR) branch piece (Single Y) equal or unequal 110mm, complete all as specified and directed. 1 Each
99 97 PVC (SWR) floor trap 75mm dia with CP grating including jointing to waste fixed in PCC (1:2:4) type B-1 complete all as specified and directed. 3 Each
100 98 Salt glazed stone ware (SGSW) drain pipes of grade 'A' 150mm bore laid in trenches and jointed on concrete bed complete all as specified and directed. 15 Running Metre
101 99 Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 150mm bore of pipe plain cement concrete 1:3:6 type C-2 (Using 40mm graded stone aggregates) complete all as specified and directed. 15 Running Metre
102 100 Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4, type B-1 smooth finished and reforming benching as required for 150mm bore pipe, complete all as specified and directed. 1 Each
103 101 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc. complete all as specified and directed. 4.72 Running Metre
104 102 Painting lines, dashes, arrows, letters etc on concrete surfaces and the like n.exc 10cm wide and with road marking paints, white or golden yellow all as specified and directed. 7 Per 10 RM
105 103 Supply and fixing basket ball Mild Steel Tubular pole 150 mm diameter 3.20 metres height (Note: length measured after errection in foundation from top of edge of rim to the floor) and shape including two coats of synthetic enamel paint over one coat of red oxide primer with 25 mm thick fibre glass board reinforced 105x180 cms, ring 500 mm diameter and net complete fixing in ground all as directed. Make : Get Set Sports Company/Sant Compressor (India)/Bajaj & Co. 1 Each Pair
106 104 Preparation of new or previously untreated wall surfaces and applying three coats of white wash, complete all as specified and directed. 145 Square Metre
107 105 Preparation of new or previously untreated ceiling surfaces and applying two coats of white wash, complete all as specified and directed. 126 Square Metre
108 106 Preparation of old or previously treated ceiling surfaces and applying two coats of white wash, complete all as specified and directed. 30 Square Metre
109 107 Preparation of new plastered external surfaces of wall and applying two coats of weather proof paint (Apex) including a coat of alkali resistant primer coat over and including a coat of wall care putty (Birla/JK) of average thickness 2 to 3mm including projected portion, column, chajja, fascias etc., complete all as specified and directed. 455 Square Metre
110 108 Preparation of old plastered external surfaces of wall and applying two coats of weather proof paint (Apex) including a coat of alkali resistant primer coat over and including a coat of wall care putty (Birla/JK) of average thickness 2 to 3mm including projected portion, column, chajja, fascias etc., complete all as specified and directed. 80 Square Metre
111 109 Preparation of new plastered external surfaces of wall and applying two coats of cement base paint including one coat of cement primer completeall as specified and directed. 135 Square Metre
112 110 Preparation new plastered surfaces of wall and applying two coats of oil emulsion distemper roller finish over a coat of alkali resistant primer coat over and including a coat of wall care putty (Birla/JK) of average thickness 2 to 3mm complete all as specified and as directed. 240 Square Metre
113 111 Preparation old plastered surfaces of wall and applying two coats of oil emulsion distemper roller finish over a coat of alkali resistant primer coat over and including a coat of wall care putty (Birla/JK) of average thickness 2 to 3mm complete all as specified and as directed. 80 Square Metre
114 112 Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. 42 Square Metre
115 113 Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed. 21 Square Metre
116 113.5 E/M Portion BI01010001010000000000000515BI0100001124
117 114 Taking out carefully copper/aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed. 25 Point
118 115 Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC conduit and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sheet or cast iron boxes including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed. 28 Point
119 116 All as per the description of Serial Item No 115 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and as directed. 5 Point
120 117 All as per the description of Serial Item No 115 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.5 Sqmm conduit all as specified and directed. 6 Point
121 118 Switch piano flush type single pole, one way 5 Amp, complete all as specified and as directed. 28 Each
122 119 Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed. 6 Each
123 120 Switch socket out let combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed. 7 Each
124 121 Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed. 17 Each
125 122 Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed. 7 Each
126 123 LED Lamp 230 volt 07 watts complete all as specified and as directed. \nMake : Havells / Crompton Greaves / Philips / Wipro 7 Each
127 124 Exhaust Fan, 380mm sweep, single phase, 230 volts 50 Hz AC,1400 RPM, energy efficient, BEE 5-Star Rating for energy saving, heavy duty totally enclosed, heavy duty motor with die-cast aluminiun rotor mounted on two ball bearings complete with louvers and shutters including cutting hole for fixing exhaust fan to wall and making good the disturbed surfaces (including plastering, necessary brickwork and distempering) to match with the existing specification, connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed.\nMake : Havells Turbo force SP or equivalent in Crompton / Bajaj. 1 Each
128 125 Electronic fan regulator stepped type with five step 240 volts 100 watt suitable for 1200mm / 1400mm sweep AC ceiling fan complete all as specified and as directed. 4 Each
129 126 Tube light fitting box type suitable for and including LED 16/18W tube Rod 4' long with decorative colour and cap made out of CRCA sheet powder coated complete with housing and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed. \nMake : Crompton Cat Part No LTT8-16 & DMLN1LT8-16 or equivalent in Philips / Bajaj. 15 Each
130 127 MCB SPN 6 to 32 Amp, 240 volts 50Hz,10 KA AC supply, complete all as specified and as directed. 3 Each
131 128 MCB SP 6 to 32 Amp 10 KA, complete all as specified and as directed. 9 Each
132 129 Sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way, complete all as specified and as directed. \n 1 Each
133 130 Sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 4 Way, complete all as specified and as directed. \n 2 Each
134 131 1100 volts grade heavy duty cable weather proof PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hanger not more than 1 meter apart including 4mm GI suspension wire one twin core cable flat or circular of size 10 sqmm to be connected to MCB box / main switches complete all as specified and as directed. 50 Running Metre
135 132 Sub main wiring with two single core PVC insulated multistranded un-sheathed FRLS cable of size 4.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including conduit and accessories) with continuous PVC insulated multistranded unsheathed FRLS cable earth wire of 2.5 Sqmm dia complete all as specified and directed. \nNote : Two run of 4.0 Sqmm wire, one run of 2.5 Sqmm wire and one run of PVC conduit shall be considered as one unit length. 29 Running Metre
136 133 Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth for electric poles / stay foundation and under ground electric power cables, CI /GI pipes etc and getting out, complete all as specified and as directed. 15 Cubic Metre
137 134 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil, complete all as specified and as directed. 9 Cubic Metre
138 135 Removing excavated surplus material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed. 6 Cubic Metre
139 136 XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 2 core complete all as specified and directed.\nMake : Havells / KEI / Polycab\n 80 Running Metre
140 137 Supply and laying brick covering with width equal to length of bricks as mechanical protection to underground cable using old size sub class 'B' bricks, laid flat size 230mm x 115mm x 75 mm, all as specified and as directed. 557 Each
141 138 Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches complete, all as specified and as directed. \nNote : The punned thickness 18cm shall be considered for measurement purpose. 5 Cubic Metre
142 139 Steel pipe galvanised medium grade, 40 mm bore laid in trenches or under ground/floor or road of fixed with pole for protection of cable including GI clamps with bolts nuts and washers complete all as specified and directed.\nMake : Jindal / Tata / Prakash Surya 6 Running Metre
143 140 Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 25mm, complete all as specified and as directed. 13 Running Metre
144 141 Gun metal globe or gate valve with iron wheel heads, screwed both ends for 25mm dia bore iron pipe complete all as specified and directed. 1 Each
145 142 Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion. 1 Each Set
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail