}

Special Repair To Pump House And Filteration Plant At Naval Base Porbandar, Porbandar-Gujarat

Military Engineer Services-MES has published Special Repair To Pump House And Filteration Plant At Naval Base Porbandar. Submission Date for this Tender is 21-08-2020. Building Repair Tenders in Porbandar Gujarat. Bidders can get complete Tender details and download the document.




Tender Notice

25112601
Special Repair To Pump House And Filteration Plant At Naval Base Porbandar
Open Tender
Indian
Gujarat
Porbandar
21-08-2020

Tender Details

Special Repair To Pump House And Filteration Plant At Naval Base Porbandar

Key Value

Document Fees
INR 500 /-
EMD
INR 25000.0 /-
Tender Value
INR 12.50 Lakhs /-

BOQ Items

Name of Work: SPECIAL REPAIR TO PUMP HOUSE AND FILTERATION PLANT AT NAVAL BASE PORBANDAR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Supply, Laying, Jointing & Testing Mild Steel Galvanized pipe conforming to IS:1239 heavy duty with all joints and fittings (such as sockets, bends, elbow, tees, short pieces, connectors, back nuts, caps, plugs,etc) including cutting, screwing as required at site and taking out the existing pipe line complete of following sizes:-
2 1.01 (a) 80 mm dia 60 RM
3 1.02 (b) 100 mm dia 65 RM
4 2 Supply, Laying, Jointing & Testing Cast iron water pipe with spigot & socketed joints centrifugally cast class LA complete laid in trenches including taking out the existing pipe line with fittings etc of following sizes:-\nCI fittings shall be measured and paid separately.
5 2.01 (a) 150 mm dia 35 RM
6 2.02 (b) 100 mm dia 90 RM
7 2.03 (c ) 80 mm dia 50 RM
8 3 M & L for CI fitting such as bend, tee pieces, collars, flange of any size from 80mm to 150mm complete all as specified and directed. 80 Kg
9 4 M & L for run lead joint in spigot and socketed pipe of size 80mm in any position including spun yarn complete all as specified and directed. 7 Each
10 5 M & L for run lead joint in spigot and socketed pipe of size 100mm in any position including spun yarn complete all as specified and directed. 15 Each
11 6 M & L for run lead joint in spigot and socketed pipe of size 150mm in any position including spun yarn complete all as specified and directed. 8 Each
12 7 Supply and fixing sluice valve stainless steel spindle cast iron both ends flanged and drilled (ISI marked) heavy duty PN 1.0 with conforming to IS 14846 including provision of nut bolts with washers packing and jointing materials like rubber insertion sheet 3 mm thick & fixed to pipe line, testing fixed in repair / replacement complete all as specified & directed for the bore sizes 100 mm dia. 3 Each
13 8 Supply and fixing sluice valve stainless steel spindle cast iron both ends flanged and drilled (ISI marked) heavy duty PN 1.0 with conforming to IS 14846 including provision of nut bolts with washers packing and jointing materials like rubber insertion sheet 3 mm thick & fixed to pipe line, testing fixed in repair / replacement complete all as specified & directed for the bore sizes 150 mm dia 3 Each
14 9 Supply and fixing galvanised steel water tubing medium grade ISI marked screwed socketed ends complete with all tube fitting (such as bends, elbow, tees, short pieces, connectors, back nuts, caps, plugs, etc) fixed to wall with clips, wall hooks, wooden plugs or laid in trenches cutting, screwing including taking out the existing pipe line with fitting complete of following sizes:-
15 9.01 (a) 80 mm dia 30 RM
16 9.02 (b) 50 mm dia 100 RM
17 9.03 (c ) 40 mm dia 30 RM
18 9.04 (d) 25 mm dia 40 RM
19 9.05 (e) 20 mm dia 10 RM
20 9.06 (f) 15 mm dia 10 RM
21 10 Supply and fixing gunmetal gate valve screwed down high pressure with iron wheel head/ long shank and cup butterfly type screwed both ends for iron pipe including taking out unserviceable valve for the following sizes:-
22 10.01 (a) 50 mm dia 5 Each
23 10.02 (b) 40 mm dia 2 Each
24 10.03 (c ) 25 mm dia 5 Each
25 10.04 (d) 20 mm dia 2 Each
26 10.05 (e) 15 mm dia 2 Each
27 11 Excavation in trenches n.exe. 1.5 mtr in depth for laying of Pipe lines and getting out in soft/loose soil complete all as specified 67.5 Cum
28 12 Returning filling in including spreading levelling,watering,and well ramming in layers not exc.25 cm in any type of soil 57.5 Cum
29 13 Removing excavated materials not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point. 10 Cum
30 14 Supply and fixing water pressure gauge with black steel case, copper alloy wetted parts, snap-in- acrylic window with white plastic dial and plastic pointer having 0-20 kg/cm2 pressure range, including taking down old pressure gauge complete all as specified & directed. 3 Each
31 15 Supply and fixing water pressure gauge with black steel case, copper alloy wetted parts, snap-in- acrylic window with white plastic dial and plastic pointer having 0-14 kg/cm2 pressure range, including taking down old pressure gauge, complete all as specified & directed. 3 Each
32 16 M&L for Construction of valve chambers 1200 mmx1200mmx900 mm (Internal size) with 15 cm thick solid concrete block masonary,block casted using PCC 1:2:4 type B-1mix built in cement and sand mortar 1:4,15 mm plaster to thick internal surface and external surface up to 15 cm below ground level and top of floor in CM 1:4 finished even and smooth without using extra cement 15 mm thick, MS sheet cover including 40x40x3 mm MS angle frame embedded in 150 mm thick PCC 1:2:4 type B-1,with 25x6 mm flat iron hold fast,handles,hinges with locking arrangments, applying one coat of red oxide primer and two coat of synthetic enamel paint to all steel surface and earth work in type of soil including demolition of existing damaged valve chambers & disposal of surplus soil to a distance n.exc.50 m. 2 Each job
33 17 Supply and fixing water Meter with Y-stainer, Bulk enclosed type mettallic gears IS: 2373, flanged type complete with connected accessories for fixing in pipeline all as specified of 150mm siz, including taking down old water meter complete all as specified and directed. 1 Each
34 18 M & L for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high with synthetic enamel paint as per colour scheme all as specified. 30 Per 10 Nos (Per cm of height)
35 19 M&L for Disconnection electrical and water connection of the induction motor with base plate and transported to work shop opening carefully and replacement of bushes, gland packing, ball bearing, rubber gasket nut and bolt including two coat of synthetic enamelled paint over a coat of red oxide primer including replacement of parts complete re-fixing to its original position and making all electrical and water connection and testing& commissioning complete all as specified and directed for the following capacity of motors.\nNote :-\n(i) The quoted rate includes transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commissioning complete.\n(ii) The cost of parts of Electricals specified herein after and rewinding is not included but the cost of labour for fixing of parts / items to be supplied only is deemed to be included in the quoted rate.
36 19.01 (a) 5 HP 3 Each job
37 19.02 (b) 3 HP 2 Each job
38 20 Supply only shaft suitable for induction motor pumps for the following sizes.
39 20.01 (a) 5 HP 2 Each
40 20.02 (b) 3 HP 2 Each
41 21 Supply only bearing suitable for induction motor pumps for the following sizes.
42 21.01 (a) 5 HP 3 Each
43 21.02 (b) 3 HP 3 Each
44 22 M&L for rewinding of centrifugal pump set of electrical motor with super enamelled copper winding wire of superior gauge but not less than original, cutting and taking out old winding wire complete with all insulation material such as Cotton, tape varnish complete all as specified and directed for the following capacity of motors.
45 22.01 (a) 5 HP 2 Each Job
46 22.02 (b) 3 HP 1 Each Job
47 23 S&F MCCB 4 Pole 415 volt of following capacity on existing panel including removing old MCCB complete all as specified and directed.
48 23.01 (a) 250 Amps 25 KA. 1 Each
49 23.02 (b) 200 Amps 16 KA. 1 Each
50 23.03 (c) 100 Amps 10 KA. 1 Each
51 24 M&L for preparation of old painted steel or iron surfaces of any description , over 10cm in width or girth, not otherwise described including scraping , burning with flame etc and applying two coat of synthetic enamelled paint of approved shade with spray painting on panels Complete all as specified and as directed. 50 Sqm
52 25 S&F volt meter 0-500 volt square/round digital type incl taking down old meter complete all as specified and directed by Engr-in-Charge. 4 Each
53 26 S&F 0-100 Amp ammeter, digital type including taking down old one complete all as specified and directed. 4 Each
54 27 Supply and fixing DOL starter suitable for 7.5HP motor type MK-1 with M S sheet enclosure fixed in replacement complete all as specified and as directed Make : L&T (Cat No : SS96210) /Siemens/Havell's 1 Each
55 28 Supply, laying, Jointing and Testing XLPE insulated armoured (under ground) heavy duty electric cable with standard aluminum conductor 1100 Volts grade of cross sectional area 70 sqmm 3.5 core laid in trenches/ducts/through pipes /in floor road/along the pole etc complete all as specified. 60 RM
56 29 Material and labour for point wiring with 2.50 Sqmm single core PVC insulated unsheathed cable of 1100 volts FRLS grade, multistranded with copper conductor drawn through PVC casing capping and accessories fixing in walls covered with plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screw for housing the switches, switch socket outlets including provision of 1.50 Sqmm PVC insulated copper conductor single core for earth continuity conductor and connecting to common earth dolly for 15 Amps switch socket independent board. 2 Point
57 30 S&F Switch socket combination 5A/16 A ,5 in 1 complete all as specified and directed. 2 Each
58 31 Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc, Complete all as specified and directed. 500 Sqm
59 32 M & L rendering 15 mm thick on fair faces of stone masonry surfaces or concrete surfaces in cement mortar 1:4 finished even & smooth with out using extra cement including use of water proofing compound , complete all as specified and directed. (Note- Water proofing compound use against this item measured and paid separately ) 500 Sqm
60 33 M&L three coat of white wash on newly plastered surfaces as on wall including preparation of surfaces complete all as specified and directed . 400 Sq. m
61 34 M&L for acrylic emulsion weather proof antifungal paint on newly plastered surfaces of wall or concrete surfaces in two coats including preparation of surfaces and one coat of primer, complete all as directed by Engr-in-charge. 100 Sqm
62 35 Taking out existing sand / gravel / sludge of rapid gravity filter media at filtration plant and depositing near site at a distance not more than 50 m apart from the starting point , washing and screening and sorting and stacking usable filter media , remove rubish outside MD land all as specified and directed. \nNote: Rate quoted for Item no 35 to 37 includes cleaning of filter bed side and suface and testing commissioning to get optimum filter capacity. 36 Cu. m
63 36 Laying only filter media to required level and compaction obtained from item no 35 above complete all as specified and directed. 12 Cu. m
64 37 Supply and fixing broken stone aggregate gravels suitable for filter bed of filtration plant laid dry in layers to required level and compaction of following sizes all as specified and directed.
65 37.01 (a) 20 mm gauge size stone aggregate. 4 Cu. m
66 37.02 (b) Stone aggregate of 1 mm to 25 mm size. 4 Cu. m
67 37.03 (c) Stone aggregate of 4 to 10 mm size. 4 Cu. m
68 38 Supply and laying filter media, sand mesh of following size suitable for filter bed of filtration plant laid dry in layers to required level and compaction complete all as specified and directed.
69 38.01 (a) Sand of mesh size 2.36 to 4.75 mm. 4 Cu. m
70 38.02 (b) Sand of mesh size 1.18 to 2.36 mm. 4 Cu. m
71 38.03 (c) Sand of mesh size 450 mm. 4 Cu. m
72 39 Supply only integral water proofing compound. 163.8 Kg
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail