}

Replacement Of Sleepers By Trt Machine 11.2 Kms In Kalyan Lonavala Section Under Sr.Den Ctl-Maharashtra

Central Railway-CR has published Replacement Of Sleepers By Trt Machine 11.2 Kms In Kalyan Lonavala Section Under Sr.Den Ctl. Submission Date for this Tender is 21-08-2020. Machine Tools Tenders in Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

25111434
Replacement Of Sleepers By Trt Machine 11.2 Kms In Kalyan Lonavala Section Under Sr.Den Ctl
Open Tender
Indian
Maharashtra
21-08-2020

Tender Details

Replacement Of Sleepers By Trt Machine 11.2 Kms In Kalyan Lonavala Section Under Sr.Den Ctl

Key Value

Document Fees
INR 5000 /-
EMD
INR 132200.0 /-
Tender Value
INR 66.11 Lakhs /-

BOQ Items

0 1 2 3 4 5 6 7 8
0 S.No. Item\rCode Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding\rUnit
1 Schedule A-Replacement of Sleepers by TRT machine 11.2 kms in Kalyan Lonavala\rSection under Sr.DEN CTL 6611315.20
2 1 NS1 18592.00 Per Sleeper 258.40 4804172.80 AT Par 4804172.80 Rs.
3 Description:- Operating TRT machine for sleeper replacement in Mumbai division with following activities with all\rcontractor labour/tools/plant/machines etc- (1)Opening of track to facilitate TRT working including removing of\rballast from crib, shoulder & below sleeper upto desired depth and opening out of level crossing upto 50 mm\rbelow the bottom of sleeper and upto required length of TRT working by dismantling pucca road surface. (2)\rRemoving of obstruction in track causing hinderence to per block movement of slade during working of TRT\rmachine in block including released sleeper, rail, S&T cable in ballast, boulder which are not visible prior to block\rand removal of other visible obstructions like OHE bonds, curve pegs, hectometer posts. (3)Opening of joggled\rfish plate & re-fixing same after TRT work and joining of new & old rails by providing slotted fish plates two sides\rof rail will be bought in one line pushing with crow bar. (4)Providing lighting arragement at works site during night\rhours for carrying out various works on track & other specified locations with contractor's generator and lighting\requipment's including fuel, carriage, labour, etc. complete. The lighting shall be of total intensity of 42000 lumens\rwhich shall be generally provided with 4 halogen lights of 500 W each or as approved by Engineer-in-charge. The\rrate shall be for 10 hours shift to be decided by Engineer-in-charge (5) Removing from Track ERC ( pendrol\rclip)and liner during block of TRT and refixing MS/GFN Liner, driving of ERC after applying contractor graphite\rgrease "0" to IS408-1981. (6) Insertion of MS flat Plate in Concrete sleeper & picking after passing sledge & pass\rto labour working ahead working under TRT for continuous movement of sledge.MS plate/flat will be made\ravailable near the site of work and all handling leading from stacking point to be done by contractor at his own\rcost. (7) removing from track approximately 7 sleeper at the start of TRT block and inserting back the sleeper at\rclose of TRT block and packing before closing the block. (8) Loading & unloading of new fittings (4 ERC, 4 MS\rliner & GR pads make one set) Into TRT BFR's & loading of released fittings into TRT wagons having crawling\rspeed during block & unloading & stacking the same in TRT depot (9) Spreading of GR pad in MBC rail seat\rproperly & fitting of ERC & liner at sleeper. (10)Providing batter/ separator between 2 sleeper layer in new MBC &\rreleased MBC while stacking of sleeper on TRT BFR during TRT block and correcting misaligned released\rsleeper for smooth picking up by TRT gantry. as directed by site in-charge without loss of time during TRT\rblockworking. (11) Cleaning of cribs & shoulder ballast after removing 7 sleeper at the time of start of TRT work &\rfilling ballast into cribs behind TRT work from same line to make good the deficiency during block . (12)Vertical\rcutting 90R/52/60 kg rail by gas cutting as required during TRT work & cutting of scrap rail by gas cutting.\r(13)Holding, pushing & guiding released MBC at pickup positionand Removal of old entangled/broken sleepers at\rpicking unit/conveyor belts/platform of TRT and Setting right new PSC entangled sleepers at conveyor belt and\rpushing of released sleepers on carrier of OT of TRT machine (i.e. from chain of OTI-OT2) during TRT blocks.....\rcondt ...(Full description of NS/1 has been uploaded as Annexure A in documents attached)
4 NS2 37184.00 Per Sleeper 32.40 1204761.60 AT Par 1204761.60 Rs.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail