}

Construction Of Primary Health Sub Center At Village Ghargaon Tq Kallam Dist . Osmanabad, Construction of Primary Health Sub Center At Villa-Maharashtra

Rural Development Department has published Construction Of Primary Health Sub Center At Village Ghargaon Tq Kallam Dist . Osmanabad. Submission Date for this Tender is 01-09-2020. Building Work Tenders in Construction of Primary Health Sub Center At Villa Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

25108419
Construction Of Primary Health Sub Center At Village Ghargaon Tq Kallam Dist . Osmanabad
Open Tender
Indian
Maharashtra
Construction of Primary Health Sub Center At Villa
01-09-2020

Tender Details

Construction Of Primary Health Sub Center At Village Ghargaon Tq Kallam Dist . Osmanabad

Key Value

Document Fees
INR 5000 /-
EMD
INR 87858.0 /-
Tender Value
INR 87.85 Lakhs /-

BOQ Items

Name of Work:Construction of Primary Health Sub Center At Village Ghargaon Tq-Kallam & Dist. Osmanabad
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means BI01010001010000000000000515BI0100001113 195.4 Cu.M.
2 2 Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means BI01010001010000000000000515BI0100001114 37.17 Cu.M.
3 3 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. BI01010001010000000000000515BI0100001115 52.07 Cu.M.
4 4 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) BI01010001010000000000000515BI0100001116 58.06 Cu.M.
5 5 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 47.63 Cu.M.
6 6 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 191.56 Cu.M.
7 7 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain / obscured glass pans 5 mm thick and approved type quality and iron oxidized fixtures and fastening with guard square bars 12 mm 10 cm c/c and oil painting 2 coats etc. complete. 11.39 Sq.M.
8 8 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete 0.59 Cu.M.
9 9 FF 0.18 Cu.M.
10 10 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. 13.92 Sq.M.
11 11 FF 3.48 Sq.M.
12 12 Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever\nnecessary, curing, etc. complete. 43.29 Sq.M.
13 13 FF 6.48 Sq.M.
14 14 Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil\npainting 3 coats complete 26.87 Sq.M.
15 15 FF 4.39 Sq.M.
16 16 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 16.58 Sq.M.
17 17 FF 6.63 Sq.M.
18 18 Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box 34.65 Sq.M.
19 19 FF 4.95 Sq.M.
20 20 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of\napproved quality etc. complete. 4.32 Sq.M.
21 21 FF 1.08 Sq.M.
22 22 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 89.51 Cu.M.
23 23 FF 13.91 Cu.M.
24 24 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. 39.06 Sq.M.
25 25 FF 12.21 Sq.M.
26 26 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. BI01010001010000000000000515BI0100001118 14.85 M.T.
27 27 FF BI01010001010000000000000515BI0100001119 1.75 M.T.
28 28 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) BI01010001010000000000000515BI0100001120 44.55 Cu.M.
29 29 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) BI01010001010000000000000515BI0100001121 18.83 Cu.M.
30 30 FF BI01010001010000000000000515BI0100001122 3.41 Cu.M.
31 31 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) BI01010001010000000000000515BI0100001123 37.25 Cu.M.
32 32 FF BI01010001010000000000000515BI0100001124 4.01 Cu.M.
33 33 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 2.49 Cu.M.
34 34 FF 1.19 Cu.M.
35 35 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 53.78 Cu.M.
36 36 FF 8.43 Cu.M.
37 37 Providing and applying Bitumen VG30/VG40 layer at 2 kg. per square\nmeter over the terrace, structural slab including cleaning the surface for waterproofing as directed complete 282.5 Sq.M.
38 38 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 with cement green finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete septic tank 59.87 Sq.M.
39 39 Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. 59.87 Sq.M.
40 40 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 3.83 Cu.M.
41 41 Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 5.202 Cu.M.
42 42 FF 0.308 Cu.M.
43 43 Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) 19.59 Sq.M.
44 44 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 with neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete 405.37 Sq.M.
45 45 FF 158.72 Sq.M.
46 46 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 405.37 Sq.M.
47 47 FF 158.72 Sq.M.
48 48 Providing neeru finish to plastered surfaces in all positions including\nscaffolding and curing etc. complete. 810.74 Sq.M.
49 49 FF 158.72 Sq.M.
50 50 Providing and applying Two coats of wall care Putty on plastered\nsurface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. 293.26 Sq.M.
51 51 FF 57.05 Sq.M.
52 52 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. 588.87 Sq.M.
53 53 FF 116.01 Sq.M.
54 54 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. 76.16 Sq.M.
55 55 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. 202.19 Sq.M.
56 56 FF 39.47 Sq.M.
57 57 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and\nclearing etc. complete 80.55 Sq.M.
58 58 FF 3.9496 Sq.M.
59 59 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning\ncuring etc. complete. 14.49 Sq.M.
60 60 FF 5.04 Sq.M.
61 61 Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry\ncleaning curing etc. complete. 2.4 Sq.M.
62 62 FF 1.1999 Sq.M.
63 63 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning\netc. complete. 24.96 Sq.M.
64 64 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 118.29 Sq.M.
65 65 FF 33.23 Sq.M.
66 66 Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) 3.66 Sq.M.
67 67 FF 1.83 Sq.M.
68 68 Providing and fixing 1st class white glazed earthenware Orissa Type\nW.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. 2 Nos.
69 69 FF 1 Nos.
70 70 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 2 Nos.
71 71 FF 1 Nos.
72 72 providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black\n/ coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size\n1.20 m x 0.60 m ) 2 Nos.
73 73 Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. 4 Nos.
74 74 FF 1 Nos.
75 75 Providing and fixing in position UPVC ultra violet stabilized 110 mm\nouter diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete 8 Nos.
76 76 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.\ncomplete. 50 RgM
77 77 FF 10 RgM
78 78 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.\ncomplete. 50 RgM
79 79 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.\ncomplete. 50 RgM
80 80 FF 10 RgM
81 81 Providing , laying and fixing ,jointing Eco- drain 110 mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. 32 RgM
82 82 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with\nR.C.C. Cover medium duty 140 kg with frame etc complete. 4 Nos.
83 83 Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. 4 Nos.
84 84 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters 4000 Ltrs
85 85 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. 16 Nos.
86 86 FF 6 Nos.
87 87 Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning\n,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. 891.879 Sq.M.
88 88 FF 256.29 Sq.M.
89 89 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. 125.4 Sq.M.
90 90 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.\nNOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary 588.87 Sq.M.
91 91 FF 116.009 Sq.M.
92 92 Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number\n,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. 66 RgM
93 93 Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete. 4 Nos.
94 94 Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1000mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. 6 RgM
95 95 Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm.\nheight letter, figures including painting the lefters/figures with approved colour and shade complete 1 Nos.
96 96 Providing patti/ band 100mm wide on plastered surface 12 mm to 15\nmm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. 150 RgM
97 97 Providing patti/ band 75mm wide on plastered surface 12 mm to 15\nmm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. 100 RgM
98 98 Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc. complete. 300 RgM
99 99 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete 46.71 Sq.M.
100 100 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil\npainting complete. 38.9699 Sq.M.
101 101 FF 6.03 Sq.M.
102 102 Providing and Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kg/Cum.density and 10 mm dia.for steel bars 2 Nos., wooden block to receive fixtures, having M.S. hinges 100 mm length, M.S. handles 150 mm length and 10 mm dia sliding door bolt etc. complete 15.3599 Sq.M.
103 103 FF 1.9199 Sq.M.
104 104 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced\nM.S. angles of size 35mmx35mmx3mm duly painted including Two\nM.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge 1 Nos.
105 105 A) M20 Compressive Strength . 19 test
106 106 B) VITRIFIED TILES\nWater Absorption, Modules of Rapture (Set of 6 Tiles) 1 Test
107 107 C) BRICKS\nWater Absorption, Compressive\nStrength, Efflorescence. 2 Test
108 108 D) STEEL- Tensile strength,elongation,yield stress,wt.per mtr,bend/rebend test,proof stress\n 1 test
109 109 E) Concrete Mix Design 1 test
110 110 Royalty Charges For Supply of Sand 207.48 Cu.M.
111 111 Royalty Charges For Supply of Soil 60mm/40mm Metal (Hand Broken) 284.27 Cu.M.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail