Public Works Department-PWD has published Construction Of Divisional Office Building Of Hppwd At Kotkhai Distt . Shimla , H . P . Sh Civil Works W . S . And S . I Site Development Septic Tank I . E . Soak Pit And Rain Water Harvesting Tank Etc. Submission Date for this Tender is 17-08-2020. Building Work Tenders in KOTKHAI Himachal Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: C/o Divisional Office Building of HPPWD at Kotkhai, Distt. Shimla, H.P. (SH:- Civil works W.S. & S.I site development septic tank, i.e. soak pit and rain water harvesting tank etc.) | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Excavation in foundations, trenches etc. in all kinds of earth work including spade work, pick work, jumper work blasting work including where blasting is prohibited and chiselling / wedging out of rock and their intermediate classification of soil including dewatering whereever required upto all leads and lifts and stacking the excavated soil not more than 3 mtr.s clear from the edge of the excavation and then returning the stacked soil in 15 cm. layer when required into plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth to the dumping site through all mode of transportation including head load, animal load or mechanical means alongwith its leveling at dumping site and complete the work by mechanised means and labour ( If any required) further any loss of the public and private property during the course of execution shall be the absolutely responsibility of the contractor which shall have to duly compensated by him in all respect. | |||
2 | 1.01 | Pick /Jumper work | 337.18 | Per cubic mtr. | |
3 | 2 | Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including carriage of material in all leads and lifts. | 15.58 | Per cubic mtr. | |
4 | 3 | Excavation in Hill area by manual/mechanical means:- Excavation in soil in hill areas all heights and depth in all kind of soil including saturated soil comprising of mixed soil, ordinary rock and hardd rock all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiselling and wedging out rock( where blasting is prohibited) including cutting and trimming of side slopes and disposing of excavated earth with a lift upto all heights and all leads as directed by the Engineer-in-Charge, in conformately with the requirement of technical specification of rural roads clause 1603.1 all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases. | 86.24 | Per cubic mtr. | |
5 | 4 | Excavation for structures:- Earth work in excavation for structure in all depth as per drawing and technical specification Clause 305-1 including setting out, construction of shoring and bracin , removal of stumps and other deleterious material and disposal in all lead and lift including dressisng of sides and bottom and back filling in trenches with excavated suitable material . All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiselling and wedging out of rock( where blasting is prohibited) as directed by the Engineer-in-Charge.all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases. | 203.76 | Per cubic mtr. | |
6 | 5 | Excavation in drains and channels etc. in all kinds of earth work including spade work, pick work, jumper work, blasting work and chiselling/wedging out of rock etc. including dressing of sides and bed and disposing of excavated earth upto all leads and lifts and disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge. | 32.4 | Per cubic mtr. | |
7 | 6 | Providing form work with steel plates 3.15mm(three point one five millimtr.) thick welded with angle iron in frame 30x30x5mm ,so as to give a fair finish including centring ,shuttering ,strutting and propping etc. with wooden \steel battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work in: | |||
8 | 6.01 | Foundation footing and basis of columns, etc. and mass concrete. | 76.1 | Per square mtr. | |
9 | 6.02 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like:- Floor etc. upto any thickness | 418.72 | Per square mtr. | |
10 | 6.03 | Vertical surfaces such as wall (any thickness) partition and the like including attached pillasters, buttresses plinth and string courses and the like. | 70.73 | Per square mtr. | |
11 | 6.04 | Columns, pillars, posts and struts :- Square rectangular or polygonal in plan | 262.68 | Per square mtr. | |
12 | 6.05 | Stair cases with slopping or stepped soffits excluding landing. | 57.99 | Per square mtr. | |
13 | 6.06 | Beams, cantilever, girders and lintels :- Sides and soffits of beams, beam haunching cantilevers, brssumers and lintels in all depth in all heights from floor | 370.24 | Per square mtr. | |
14 | 6.07 | Edges of slabs and break in floors and walls :- Under 20cm wide :- | 217.17 | Per running mtr | |
15 | 7 | Providing and laying cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering including carriage of materials in all leads and lifts :- | |||
16 | 7.01 | Foundations and plinth | 26.68 | Per cubic mtr | |
17 | 8 | Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate40 mm nominal size) and curing complete excluding cost of centring and shuttering but including carriage of materials in all leads and lifts :- | |||
18 | 8.01 | Foundations and plinth | 20.88 | Per cubic metre | |
19 | 9 | Providing and laying cement concrete 1:2:4 (1 cement : 2sand : 4 graded stone aggregate20 mm nominal size) and curing complete excluding cost of centring and shuttering but including carriage of materials in all leads and lifts :- | |||
20 | 9.01 | Foundations and plinth | 6.25 | per cubic mtr | |
21 | 10 | Providing and laying cement concrete 1:1.5:3 (1 Cement:1.5 Sand:3 graded stone aggregate 20mm nominal size) and curing complete mechanically mixed and vibrated excluding cost of form work and reinforcement for reinforced concrete work in Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor all level complete including carriage of materials within all leads and lifts. | |||
22 | 10.01 | Foundation, footing, bases of columns and the like and mass concrete. | 64.64 | Per cubic metre | |
23 | 10.02 | Walls any thickness (thickness not more than0.10m) individually or forming box louvers and projected band upto floor two level. | 7.96 | Per cubic metre | |
24 | 10.03 | Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever. | 126.47 | Per cubic metre | |
25 | 10.04 | Columns, pillars, posts and struts :- | 28.24 | Per cubic metre | |
26 | 10.05 | Stair cases ( except spiral stair case ) excluding landings but including preparing of the surface & finishing of nosing upto all floor level i | 5.88 | Per cubic metre | |
27 | 11 | Providing and laying cement concrete work 1:1½.:3 (1 cement : 1½. sand : 3 graded stone aggregate 20 mm nominal size) mechanically mixed and vibrated for compacting concrete and curing complete to give smooth and even surface including centering and shuttering etc but excluding cost of reinforced work in:- | |||
28 | 11.01 | Mouldings as in cornics window sills etc. not exceeding 15cm girth. | 2.93 | Per cubic metre | |
29 | 11.02 | String courses, copings, bed plates, anchor blocks, plain windows sills and the like : | 1.5 | Per cubic metre | |
30 | 12 | Providing mild steel/Tor steel reinforcement including cost of binding wire for R.C.C. work including bending, binding and placing in position complete upto all floor level heights including carriage of material in all leads and lifts :- | |||
31 | 12.01 | Tor steel / TMT:- | 42474 | Per kilo gramme | |
32 | 13 | Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg. of cement per sq.metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete. | 270.1 | Per square metre | |
33 | 14 | Providing in RCC work smooth finishing of exposed surfaces with cement morter 1:3 ( 1 cement : 3 sand) | 547.97 | Per square metre | |
34 | 15 | Providing and laying cement concrete 1:8:16 (1cement: 8sand:16graded stone aggregate 20mm. nominal size) and curing complete on slab and floor excluding the cost of form work screed laid under flooring.. | 7.71 | Per cubic metre | |
35 | 16 | Brick work using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts :- | 33.16 | Per cubic metre | |
36 | 17 | Brick work using second class common burnt clay building bricks in superstructure above plinth level upto all floor levels in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts :- | 68.53 | Per cubic metre | |
37 | 18 | Half brick work using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts :- | 70.91 | Per square metre | |
38 | 19 | Half brick work using second class common burnt clay building bricks in superstructure upto all floor levels in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts :- | 321.57 | Per square metre | |
39 | 20 | Random rubble masonary/ polygon ruble mesonary (uncoursed brought to courses) with hard stone of approved quality in foundation and plinthl in cement morter 1:6 ( 1 cement : 6 sand) | 6.5 | Per cubic metre | |
40 | 21 | Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. complete including carriage of material in all leads and lifts | 27.96 | Per cubic metre | |
41 | 22 | Square rubble masonary with hard stone of approved quality in foundation and plinthl in cement morter 1:4 ( 1 cement : 4 sand) | 45.41 | Per cubic metre | |
42 | 23 | 40 mm thick cement concrete flooring 1:2:4 (1 cement :2 sand :4 grade stone aggregate 20mm nominal size ) laid in one layer finished with a floating coat of neat cement | 24.03 | Per cubic metre | |
43 | 24 | Providing and fixing factory made flush door shutter phenol bonded IS : 2202 interior grade, commercial type core of black board construction with frame of First class deodar/hard wood and well matched Fist class Indian Teak ply veenering with vertical grain of cross bans and face veenering on one face and commercial ply veenering with vertical grains of cross band of other phase of shutter. | |||
44 | 24.01 | 35 mm thick including black enameled M.S. butt hinges. | 68.1 | Per square metre | |
45 | 25 | Providing and fixing 40 mm thick panelled and glazed shutter for(Main Door) doors, windows & clerestorey windows made of second class deodar wood styles , side and top rails 100 x 40 mm, middle rail 150 x 40 mm and bottom rail 200 x 40 mm, first class deodar wood panel 12 mm thick below middle/ lock rail and 6 mm thick glass pan with rubber gasketabove lock rail including black enameled iron butt hinges with necessary screws complet as per Architecural drawing. | 3.07 | Per square metre | |
46 | 26 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm for doors, windows and clerestory windows including first class deodar wood including bright finished black enamelled iron butt hinges with necessary screws including all leads and lifts :- | |||
47 | 26.01 | Second class deodar wood :- | 7.37 | Per square metre | |
48 | 27 | Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts | 12.21 | Per square metre | |
49 | 28 | Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete . | 32.68 | Per square metre | |
50 | 29 | Providing and fixing 1.00 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts. | 12.21 | Per square metre | |
51 | 30 | Providing and fixing ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately including all leads, lifts and carriage of material :- | |||
52 | 30.01 | 6mm thick :- | 12.21 | Per square metre | |
53 | 31 | Providing and fixing square edged cover filets (beading) 19 x 6 mm section including mitring at junction with wooden screws / nails etc. complete | |||
54 | 31.01 | First Clas Deodar wood | 61.05 | Per running mtr | |
55 | 32 | Providing and fixing CP MS sliding door bolts bright finished dyed to required shade and colour with bolts and nuts etc. complete including carriage of materials in all leads and lifts:- | |||
56 | 32.01 | 300 X 16 mm | 4 | Each | |
57 | 32.02 | 250 X 16 mm | 27 | Each | |
58 | 33 | Providing and fixing aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts:- | |||
59 | 33.01 | 250 X 10 mm | 22 | Each | |
60 | 33.02 | 200 X 10 mm | 54 | Each | |
61 | 33.3 | 150 X 10 mm | 12 | Each | |
62 | 34 | Providing and fixing aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete. | |||
63 | 34.01 | 125 mm :- | 28 | Each | |
64 | 34.02 | 100 mm :- | 54 | Each | |
65 | 34.03 | 75 mm :- | 32 | Each | |
66 | 35 | Providing & fixing hydraulic door closer EVERST make or equivalent of approved quality & manufacture & as per the entire satisfaction of the Engineer-in-Charge includingcarriage of materials within all leads,lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge. | 4 | Each | |
67 | 36 | Providing & fixing 100 mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of materials in all leads and lifts :- | 15 | Each | |
68 | 37 | Providing & fixing bright finished magnetic/catcher (M-15) with screws complete including carriage of materials in all leads and lifts :- | 22 | Each | |
69 | 38 | Providing and fixing 65mm X 35mm special quality bright finished brass cup board lock with six levers including necessary screws etc. complete. | 3 | Each | |
70 | 39 | Providing & fixing 150 mm bright finished brass hasps and stapples (safety type)with necessary screws including carriage of materials in all leads and lifts | 27 | Each | |
71 | 40 | Providing & fixing 150 mm M.S. single acting spring hinges bright finished with necessary screws etc. complete including carriage of materials in all leads and lifts :-. | 6 | Each | |
72 | 41 | Providing & fixing 150 mm M.S. double acting spring hinges bright finished with necessary screws etc. complete. | 2 | Each | |
73 | 42 | Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws.\nPlain grill. | 1861.87 | Kilo gramme | |
74 | 43 | Providing and fixing all weather proof ACP imported Sign Panel all weather proof multi colour computerised reflective digitat panel 3mm thick, mounted on powder coated G.I frame work fixed/hanging with wall or ceiling etc. with specified clamps and G.I. wires and rawl plugs etc. including carriage of material in all leads and lifts complete . | 54.88 | Per square metre | |
75 | 44 | Providing and fixing PGI sheet lining with butt jointing and nails with necessary scwews complete as per Architectural drawing. | 15.52 | Per square metre | |
76 | 45 | Providing and fixing 12 mm thick and 100 mm wide palmet with 25 mm diametre wooden/ C.P curtain rod and brackets including fixing with 25 X 3 mm MS flat 10 cm long & plugs etc. Complete: First class deodar wood. | 78 | Per running metre | |
77 | 46 | Providing and laying mirror polished Kota stone slab of uniform colour of size 55x55cm in flooring over 20mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete :-25 mm thick mirror polished slab size not less than 550mmx550mm including carriage of materials within all leads and lifts. | 475.84 | Per Square metre | |
78 | 47 | Providing and laying non-slippery spartic ceramic tiles (30 x 30cm/ 40x40 cm) and 8 mm thick of NITCO / ORIENT or equivalent in flooring treads etc. in cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto floor all level including carriage of material within all leads and lifts as per direction of Engineer-in-charge. | 58.97 | Per square metre | |
79 | 48 | Providing and laying 40 mm thick Red Mandana stone slab ( band of required width) (Table rubbed and polished) in flooring over 20mm thick base of cement mortar 1:4(1cement:4 sand) including jointing with grey cement slurry mixed with pigment to match the shade of the stone i/c rubbing and polishing complete. | 3 | Per Square metre | |
80 | 49 | Providing and laying 25 mm thick mirror polished Kota stone slab in single piece of size according to width( 30 cm) and length(1.50 metre ) of stair tread /steps) in flooring/ treads of steps over 20mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete .( Rate 943.60+20%= | 24.8 | Per Square metre | |
81 | 50 | Kota stone slab 25mm thick mirror polished of slab size not less than 550mmx550mm in risers of steps, skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry fixed with pigment to match the shade of the slabs including rubbing and polishing complete . | 76.28 | Per square metre | |
82 | 51 | Providing and laying marble work (table rubbed and polished) in flooring/skirting/wall lining 20mm. thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2(1 white cement:2 marble dust)with an admixure of pigment to match the shade of the marble. 20 mm.thick Baroda green marble. | 2.72 | Per square metre | |
83 | 52 | Providing and fixing 20 mm thick white makrana marble work (Table rubbed and polished for wall lining) VENEER work with cement mortar 1:3(1cement:3sand) including pointing with white cement mortar 1:2(1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble. | 27 | Per Square metre | |
84 | 53 | P/L heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over subbase of concrete with 25 mm thick average thickness of cement mortar 1:4( 1 cement : 4 sand ) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curring rubbing and polishing complet Subbase concrete floor to be paid for :- | |||
85 | 53.01 | 40 mm thick inter locking block | 61.2 | Per square metre | |
86 | 53.02 | 60 mm thick inter locking block | 120 | Per square metre | |
87 | 54 | Providing & fixing coloured/white glazed tiles 300 mm X 450 mm X 6mm thick in skirting risers of steps and dado on 12mm thick cement mortar 1:3 (1cement : 3sand) and jointing with neat cement slurry including carriage of material in all leads and liftrs : | 162.68 | Per square metre | |
88 | 55 | Making half round nosing / moulding in granite stone/ marble stone/kota stone in treads of steps,shelves skirting, dado etc. with mechanical /manually means including rubbing and granite polishing including carriage of materials in all leads and lifts to the satisfaction of Engineer-in-Charge complete. | 99.34 | Per running metre | |
89 | 56 | Providing and fixing Garsa slate stone / unistone 12mm. cladding on walls / R.C.C. surface side as on faces of Arch masonry walls etc.on 12mm. thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete . | 164.55 | Per Square metre | |
90 | 57 | Providing and fixing 0.60mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge:-0.60 mm ( zero point sixty millimetre) thick sheet. | 317.42 | Per square metre | |
91 | 58 | Providing and fixing ridges or hips 60 cm overall with 0.45mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges:-0.60 mm ( zero point sixty millimetre) thick sheet . | 58.7 | Per running metre. | |
92 | 59 | Providing and fixing valley 60cm overall 0.45mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge:-0.60 mm ( zero point sixty millimetre) thick sheet . | 19.2 | Per running metre. | |
93 | 60 | Providing and fixing flashing 38cm overall with 0.45mm thick prepainted sheet of a TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge:-0.60 mm ( zero point sixty millimetre) thick sheet . | 65 | Per running metre. | |
94 | 61 | Providing fixing 30 cm wide 120 cm overall box type gutter with 0.45 mm thick plain prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating with bolt and nuts and washers etc. including making necessary connections with rain water pipe complete as per design. | 84.8 | Per running metre. | |
95 | 62 | Providing and fixing on wall face PVC 150 mm dia rain water pipes of working pressure not less than 4.5 kg / sqm including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts :- | 86.4 | Per running metre | |
96 | 63 | Providing and fixing M.S. holder bat clamps of approved design to PVC. Pipes embedded in and including cement concrete blocks 10x10x10cms of 1:2:4 mix (1 cement : 2 sand :4 graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall etc including carriage of materials within all leads and lifts :- | |||
97 | 63.01 | 150 mm diametre. | 76 | Each | |
98 | 64 | Providing and fixing on wall face PVC accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts :- | |||
99 | 64.01 | 150 mm dia PVC plain bend | 20 | Each | |
100 | 64.02 | 150 mm dia PVC door bend. | 10 | Each | |
101 | 64.03 | 150 mm dia PVC plain shoe. | 10 | Each | |
102 | 64.04 | 150 mm dia PVC Collars. | 20 | Each | |
103 | 65 | Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) | 149.31 | Per square metre | |
104 | 66 | Providing and laying water proofing treatment with Dr. Fixit-FASTFLEX or equivalent with two components polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats for first coat:- clean and saturate surface and then applying a coat of Dr. Fixit -FASTFLEX by maintaning a coverage of 6-7 sft per kg to achive one mm thickness and the same process shalltended upto 300 mm vertically. The second coat shall be applied in opposit direction after four six-hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar 1 : 4 ( 1 cement : 4 sand) admioxed with 200 ml of pidiproof LW @ 200ml per 50 kg bag of cement over the floor with the suitable grediant towards drain pipe, while the second coat of Dr. Fixit is still tacky complete | 49.72 | Per square metre | |
105 | 67 | Steel work of BIS specification including hollow section welded in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint . | |||
106 | 67.01 | In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. | 120.62 | Per quintal | |
107 | 67.02 | In gratings, framed, guards, bars ladders and railing, brackets and similar works :- | 64.03 | Per quintal | |
108 | 68 | Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers, handles, including applying a priming coat of red lead paint. | 17.67 | Per square metre | |
109 | 69 | P/F angle iron door windows,cleristory windows frames manufactured from steel iron section of 40x40x6 mm thickness including hinges.jamb, lock jamb,beed and if required angle thrashold of mild steel angle 50x25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jambs including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surfaces as directed by Engineer-in-Charge. | 153.13 | Per Rmt | |
110 | 70 | Providing and fixing door,windows,clerestory windows frame manufactued from ISLC 75 mm (with MS Flat 75X4 mm for cenrte frame) & MS hollow section for rebate 40X12 mm and 1.5 mm thick welded together for making rebate i/c MS Flat Holdfast 20 cm long and 4 mm thick embedded in C.C Block 1:3:6 as per design and drawing i/c jambs, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means lugs with split end tails to each jamb i/c steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorbers as specified and applying a coat of steel primer after pre treatment of the surface complete. | |||
111 | 70.01 | side/end frame | 405.68 | Per running metre. | |
112 | 70.02 | Center/ mullion frame | 218.45 | Per running metre. | |
113 | 71 | P/F steel glazed door ,windows and ventilator of standard rolled steel section joints mitred and welded with 16x3.15 mm lugs 10 cm long embedded in C,Con, blocks 15 cm x10 cmx10 cm size of 1:3:6 with wooden plugs and screws or with fixing clips or with bolts and nuts as required and iron fittins i/C P/F of glas panes with glazing clips and special mettal sash putty of approved make complete i/C applying a priming coat of read lead paint | |||
114 | 71.01 | Fixed steel windows | 46 | Per square metre | |
115 | 71.02 | Side hung window | 57.5 | Per square metre | |
116 | 71.03 | Side hung wire gauge window | 57.5 | Per square metre | |
117 | 71.04 | Top hung ventilator | 14.33 | Per square metre | |
118 | 72 | Providing and fixing M.S round holding down or anchor bolt with nuts and washer plates complete. | 2 | Per quintal | |
119 | 73 | Providing & fixing moulded hand rail of mild steel Rectangular hollow pipe 50x40 mm welded in stright length over mild steel flat at top of vertical balusters including one coat of red oxide priming coat complete (mild steel flat & balusters of railing shall be measured & paid separately )including carriage of materials within all leads,lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge. | 50.18 | Per metre. | |
120 | 74 | Providing and fixing steel railing in ramp for hanicaped made of M.S. 50 mm dia steel pipe slip resistant with round ends at 75 cm and 90 cm height and suported with 25 mm dia steel pipe dully welded in all corners and fixing in position complete as per architectural drawing. | 7.2 | Per running metre | |
121 | 75 | Providing and fixing M.S round/ rectangular/square hollow pipe of approved size and section in vertical posts welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete including carriage of materials within all leads and lifts. | 3 | Per quintal | |
122 | 76 | Applying priming coat over new concrete / masonry / asbestos / cement / plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering as required with : | |||
123 | 76.01 | Ready mixed primer :- | 142.54 | Per square metre | |
124 | 77 | Painting two coats (excluding priming coat) on new concrete / masonary / plastered surfaces with satin enamel paint of approved shade / brand and manufacture to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping including carriage of materials within allleads and lifts. | 142.54 | Per square metre | |
125 | 78 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts. | |||
126 | 78.01 | Enamel paint other then white :- | 528.48 | Per square metre | |
127 | 79 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting including carriage of materials within all leads and lifts : | |||
128 | 79.01 | Ready mixed paint brushing wood primer pink :- | 335.54 | Per square metre | |
129 | 80 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping. | |||
130 | 80.01 | With enamel paint other than white paint :- | 335.54 | Per square metre | |
131 | 81 | 6mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all leads and lifts in all floor levels including carriage of materials within allleads and lifts :- | 443.73 | Per square metre | |
132 | 82 | 15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth including carriage of materials within allleads and lifts.. | |||
133 | 82.01 | Cement mortar 1:6 (1 cement : 6 sand) | 764.12 | Per square metre | |
134 | 83 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal / external rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth . | |||
135 | 83.01 | Cement mortar 1:6 (1 cement : 6 sand) | 764.12 | Per square metre | |
136 | 83.02 | Cement mortar 1:4 (1 cement : 4sand) | 110.39 | Per square metre | |
137 | 84 | Extra for Plastering in single coat done on mouldings, cornices or archtraves including neat finish to line and level.Cement mortar 1:3 (1 cement : 3 sand) including carriage of material within all leads and lifts. | 30 | Per square metre | |
138 | 85 | 15 mm thick plain/moulded cement mortar band in cement mortar 1:4 (1 cement; 4 sand) up to 300 mm in width | |||
139 | 85.01 | Raised band | 10.62 | Per square metre | |
140 | 86 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated ceiling or sloping surface on all floor to give an even shade over and including priming coat of whiting after thoroughly brushing the surce even and sand papered smooth including carriage of materials within allleads and lifts. | 443.73 | Per square metre | |
141 | 87 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface on all floor to give an even shade over and including priming coat of whiting after thoroughly brushing the surce even and sand papered smooth including carriage of materials within allleads and lifts. | 377 | Per square metre | |
142 | 88 | Wall painting (two coats) with acrylic/premium emulsion paint of approved brand and manufacture for interior grade on undecorated on crete / stone / plastered wall surfaces to give an even shade\nincluding t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of\nputty a required for metling the surface | 737.13 | Per square metre | |
143 | 89 | Finishing wall with weather proof exterior grade emulsion of approved shade and design (Apexultima) or its equarlied on undecorated wall surfaces two coats to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material within all leads and lifts. | 260.98 | Per square metre | |
144 | 90 | Applying one coat of acrylic primer ( Spectrum or equivalent of superior quality) on new concrete/ masonary/plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters , sand papering the surface smooth complete | 764.11 | Per square metre | |
145 | 91 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. | 1081.71 | Per square metre | |
146 | 92 | Providing and laying in trenches galvanised mild steel tubes (Medium grade), tube fittings (Earth work in trenches to be measured and paid for separately). | |||
147 | 92.01 | 20 mm nominal bore :- | 150 | Per running metre | |
148 | 92.02 | 32 mm nominal bore :- | 100 | Per running metre | |
149 | 93 | Providing and fixng to wall ceiling floor galvanised mild steel tubes (Medium grade), tube fittings and clamps (Medium grade) tube fitting and clamps including making good the wall ceiling and floor . | |||
150 | 93.01 | 15 mm nominal bore :- | 50 | Per running metre | |
151 | 93.02 | 20 mm nominal bore :- | 50 | Per running metre | |
152 | 93.03 | 32 mm nominal bore :- | 50 | Per running metre | |
153 | 94 | Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials within all leads and lifts : | 1 | Each | |
154 | 95 | Fixing water metre and stop cock in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, socket etc. cutting and making long screws complate (water meter and stop cock to be paid for separately). | |||
155 | 95.01 | 20mm nominal bore :- | 1 | Each | |
156 | 96 | Providing and fixing P V C water storage tank of ISI :12701 marked G.I inlet and outlet connection 15 mm nominal bore ball valve and mosquito proof P V C cover with locking arrangements including hosting up to all heights above ground level. | 5000 | Per litre | |
157 | 97 | Constructing chamber 300 mm X 300 mm X 500 mm deep inside size for stop cock or inspection chamber with precst RCC 1 :2 : 4 ( 1 cement : 2 sand : 4 graded stone aggregate 20 m nominal size), foundation concrete 1 : 5 : 10 ( 1 cement : 5 sand : 10 graded aggregate 40 mm nominal size) and inside plastering in cement mortar 1 : 3 ( 1 CEMENT : 3 SAND) finished with floating coat of neat cement including curing complete with 115 mm thick walls of brick masonary in cement morter 1 : 5 ( 1 cement : 5 sand). | 5 | Each | |
158 | 97.01 | 1216 mm (16 mm O.D. pipe) | 109 | Per running metre | |
159 | 97.02 | 1620 mm ( 20 mm OD pipe). | 105 | Per running metre | |
160 | 98 | Providing and fixing PE-AL-PE composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees , ekbows, reducers,connectors, couplers and clamps with jointing testing and fixing i/c cutting and making good the walls etc. | |||
161 | 98.01 | PE-AL-PE- internal seal compression fittings,Equal Tees. 1216 mm . | 20 | Each | |
162 | 98.02 | PE-AL-PE- internal seal compression fittings,Equal Tees. 1620 | 20 | Each | |
163 | 98.03 | Reducing tee :-, 1620 x all branches. | 15 | Each | |
164 | 98.04 | Reducing tee :-,2025 x 2025 x all branches | 15 | Each | |
165 | 98.05 | Female branch Tee.,1216 X 1216 X 15 mm thread. | 25 | Each | |
166 | 98.06 | Female branch Tee.1620 X 1620 X 20 mm thread. | 25 | Each | |
167 | 98.07 | Female elbow:-1216 X 15 mm thread. | 30 | Each | |
168 | 98.08 | Female elbow:-1620 X 15 mm thread. | 30 | Each | |
169 | 98.09 | Male thread connector:- 1216 X 15 mm thread. | 25 | Each | |
170 | 98.1 | Male thread connector:- 1620 X 15 mm thread. | 30 | Each | |
171 | 98.11 | Female thread connector:-, 1216 X 15 mm thread. | 25 | Each | |
172 | 98.12 | Female thread connector:-, 1620 X 15 mm thread. | 30 | Each | |
173 | 98.13 | Couplers:-, 1216 mm | 15 | Each | |
174 | 98.14 | Couplers:-,1620 mm. | 15 | Each | |
175 | 98.15 | Reducers:-, 1620 x 1216 mm. | 10 | Each | |
176 | 98.16 | Reducers:-, 2025 x 1216 | 10 | Each | |
177 | 99 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. | |||
178 | 99.01 | 150 mm dia | 115 | Per metre | |
179 | 99.02 | 110 mm dia | 120 | Per metre | |
180 | 100 | Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. | |||
181 | 100.01 | 150 mm dia | 10 | Each | |
182 | 100.02 | 110 mm dia | 13 | Each | |
183 | 101 | Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete | |||
184 | 101.01 | 150 mm dia | 10 | Each | |
185 | 101.02 | 110 mm dia | 10 | Each | |
186 | 102 | Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete. | |||
187 | 102.01 | 150 mm dia | 6 | Each | |
188 | 102.02 | 110 mm dia | 6 | Each | |
189 | 103 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. | |||
190 | 103.01 | 150 mm dia | 15 | Each | |
191 | 103.02 | 110 mm dia | 15 | Each | |
192 | 104 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. | |||
193 | 104.01 | 150 mm dia | 15 | Each | |
194 | 104.02 | 110 mm dia | 14 | Each | |
195 | 105 | Providing and fixing PVC offset 45 Govt. Degree ISI marked including fixing with approved adhesive etc. complete. | |||
196 | 105.01 | 150 mm dia | 8 | Each | |
197 | 105.02 | 110 mm dia | 10 | Each | |
198 | 106 | Providing and fixing PVC double equal branch with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete | |||
199 | 106.01 | 150 mm dia | 4 | Each | |
200 | 106.02 | 110 mm dia | 4 | Each | |
201 | 107 | Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete. | |||
202 | 107.01 | 150 mm dia | 3 | each | |
203 | 107.02 | 110 mm dia | 3 | Each | |
204 | 108 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. | |||
205 | 108.01 | 150 mm dia | 60 | Each | |
206 | 108.02 | 110 mm dia | 60 | Each | |
207 | 109 | Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. | |||
208 | 109.01 | 110 mm x 110 mm | 26 | Each | |
209 | 110 | Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete. | |||
210 | 110.01 | 150 mm x 110 mm dia | 6 | Each | |
211 | 111 | Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. | |||
212 | 111.01 | 150 mm dia | 5 | Each | |
213 | 111.02 | 110 mm dia | 10 | Each | |
214 | 112 | Providing and fixing PVC cowl including carriage of materials within all leads and lifts :- | |||
215 | 112.01 | 150 mm dia. | 2 | Each | |
216 | 112.02 | 110 mm dia. | 3 | Each | |
217 | 113 | Chase in stone / brick masonary walls for fixing sand cast iron / cast / spun iron pipes and fitting including making good the same with stone / brick work in cement mortar 1:3 ( 1 cement : 3 sand ) | |||
218 | 113.01 | 150 mm dia. | 30 | Per running metre | |
219 | 113.02 | 100 mm dia. | 30 | Per running metre | |
220 | 114 | Providing and fixing viterous China water closet squatting pan (Indian Type W.C. pan) size 580mm (Earth work, bed concrete, foot rest and traps to be measured and paid for separately including . | |||
221 | 114.01 | Orrissa pattern long pattern as per CERA catlogue No. 2071.:- | 5 | Each | |
222 | 115 | Providing and fixing viterous China wash, down water closet (European Type W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) seat and coveto be paid for separately. . | |||
223 | 115.01 | Anglo Indian Universal closet | 3 | Each | |
224 | 115.02 | European WC No.20049 EWC in white shade. | 2 | Each | |
225 | 116 | Providing and fixing 10.00 ltr.capacity PVC low level duel flushing cistern CERA catlogue No. 2603 or equivalenet with a pair of brackets with fittings such as lead valve, less syphon, 15mm nominal size PVC ball valve with polythene float, PVC handle, union and coupling for connection with inlet, outlet and overflow pipes 40 mm dia PVC flush bend with cistern and closet & over flow pipe to be paid for separately) including carriage of materials within all leads and lifts :- | 10 | Each | |
226 | 117 | Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. brass hinges and rubber buffers including carriage of materials within all leads and lifts :- | |||
227 | 117.01 | White plastic seat and cover :- | 5 | Each | |
228 | 118 | Providing and fixing viterous China wash basin of Cera Cat No. 1025 or equivalent with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting i. | |||
229 | 118.01 | Flat back :-550 X 400 mm | 13 | Each | |
230 | 119 | Providing and fixing stainless steel double bowl sink with drainage board of Super DUPLEX No-6321 Mat finished or of approved standard with C.P. waste and with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting. | |||
231 | 119.1 | 610x510 mm with bowl depth 230 mm | 2 | Each | |
232 | 120 | Providing and fixing Hindware Vitreous China padestal for wash basin complete recessed at the back for receiption pipe anf fittings. . | 23 | Each | |
233 | 121 | Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink . | |||
234 | 121.01 | 32 mm dia | 15 | Each | |
235 | 122 | Providing and fixing first quality of white shade viterous China bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp(waste pipe to be measured and paid for separately) including carriage of materials within all leads and lifts :- | |||
236 | 122.01 | Flat back type large urinal no 60001 of Cera | 7 | Each | |
237 | 123 | Providing and fixing automatic flushing cistern with a pair of C.I. or M.S. bracket complete with a pair of C.I. or M.S. bracket complete with fittings including C.I. syphonic apparatus, mosquito proof lid, C.P. brass union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over floe pipe to be measured and paid for separately) including carriage of materials within all leads and lifts :- | |||
238 | 123.01 | 10 litres capacity. | 7 | Each | |
239 | 124 | Providing and fixing C.P. brass flush pipe / spraders for urinal with fittings such as unions, clamps etc.( all C.P.) including cutting holes and making good the same. including carriage of materials within all leads and lifts :- | |||
240 | 124.01 | 15 mm nominal bore. | 8.4 | Per running metre | |
241 | 125 | Providing & fixing 100 mm dia C.P. grating for floor or nahani / gully / floor trap including carrage of material within all leads and lifts:- | 26 | Each | |
242 | 126 | Providing and fixing Galvinished mild steel puff pipe 1 m long with brass perforated cap with 15 mm dia | 10 | Each | |
243 | 127 | Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials within all leads and lifts :- | 13 | Each | |
244 | 128 | Providing and fixing C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws . | |||
245 | 128.01 | 600 X 20 mm | 2 | Each | |
246 | 129 | Providing and fixing 600mmx120 mm glass shelf with C .P brass and guard rail complete, fixed to wooden plugs with C. P brass screw | 2 | Each | |
247 | 130 | Providing and fixing toilet paper holder including carriage of materials within all leads and lifts :- | |||
248 | 130.01 | C.P. brass :- | 2 | Each | |
249 | 131 | Providing and fixing liquid soap container with C.P. brass lid and rackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts :- | |||
250 | 131.01 | Glass container. | 2 | Each | |
251 | 132 | Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts :- | 9 | Each | |
252 | 133 | Providing and fixing 15 mm mixer for kitchen simk with top / bottem swinging spout | 3 | Each | |
253 | 134 | Providing and fixing CP brass bib tap (heavy duty ISI marked IS:8931 & 8934) of jaquar with capstan head including carriage of materials within all leads and lifts :- | |||
254 | 134.01 | 15mm dia :- | 10 | Each | |
255 | 135 | Providing and fixing CP brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934). | |||
256 | 135.01 | 15mm dia :- | 13 | Each | |
257 | 136 | Providing and fixing C.P.brass angle valve of jaquar (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts :- | |||
258 | 136.01 | 15mm dia :- | 47 | Each | |
259 | 137 | Providing and fixing PVC connection pipe (heavy duty ISI marked IS:8931 & 8934) with brass union including carriage of materials within all leads and lifts :- | |||
260 | 137.01 | 45cms length :- 15mm nominal bore :- | 47 | Each | |
261 | 138 | Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts :- | |||
262 | 138.01 | 15 mm nominal bore:- | 3 | Each | |
263 | 138.02 | 20mm nominal bore :- | 3 | each | |
264 | 139 | Providing and fixing G.I. Or M.I. Union of following sizes ( where not includedin the item) . | |||
265 | 139.01 | 15mm nominal bore :- | 15 | Each | |
266 | 139.02 | 20 mm nominal bore :- | 10 | Each | |
267 | 139.03 | 32 mm nominal bore :- | 10 | Each | |
268 | 140 | Providing and fixing PTMT fancy bib cock with spout no .1391 of approved quality and colour | |||
269 | 140.01 | 15 mm | 6 | Each | |
270 | 141 | Providing and fixing PTMT fancy pillar cock with spout no .1391 of approved quality and colour | |||
271 | 141.01 | 15 mm | 4 | Each | |
272 | 142 | Providing and fixing PTMT push cock of Prayag with reducer of approved quality and colour | |||
273 | 142.01 | 20 mm x15 mm | 5 | Each | |
274 | 143 | Providing and fixing PTMT concealed stop cock of Prayag with flange of approved quality and colour | |||
275 | 143.01 | 15 mm nominal bore. | 5 | Each | |
276 | 144 | Providing and fixing PTMT angle cock of Prayag of approved quality and colour | |||
277 | 144.01 | 15 mm with flange | 10 | Each | |
278 | 145 | Providing and fixing PTMT jet spray with 1 m tube of Prayag of approved quality and colour | 5 | Each | |
279 | 146 | Providing and laying 150 mm dia ( to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm dia in trenches. | 30 | Per metre | |
280 | 147 | Providing and laying cement concrete 1:4:8 (1 Cement : 4 Sand : 8 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of the following internal diameters, necessary form work and curing complete : :- 150 mm. | 30 | Per metre | |
281 | 148 | Providing, laying, jointing and pointing with a stiff mixture of cement mortar in proportion of 1:1 (1 cement : 1 sand) 150 mm internal diameter salt glazed stoneware grade 'A' half round channels | 65.2 | Per metre | |
282 | 149 | Providing and fixing grab bars in handicaped toilet of CP 40 mm dia steel pipes 78 cm heigh welded with MS plate as per detail and position of WC seat. | 2 | Each | |
283 | 150 | Providing and fixing 32 mm dia PVC waste pipe ( 60 CM long) for wash basin and sink | 22 | Each | |
284 | 151 | Providing and fixing 455 mm X 610 mm precast reinforced cement concrete cover with frame for manholes complete including carriage of materials within all leads and lifts :- | 3 | Per metre | |
285 | 152 | Constructing manhole with R.C.C. top slab in 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4;8 ( icement ; 4 sand : 8 graded stone aggregate 40 mm nomonal size), inside plastering 15mm thick with cement mortar 1:3 (1 cement : 3 sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing including carriage of materials within all leads and lifts :- | |||
286 | 152.01 | Inside size 800mmx800mm and 500mm deep including precast RCC. cover with frame heavy duty single seal pattern-I) 455 mm X 610 mm internal diamensions.with 230mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand) :- | 2 | Each | |
287 | 152.02 | Inside size 800mmx800mm and 1000mm deep including precast RCC cover with frame (heavy duty s) 455 mm X 610 mm internal diamensions. with 230mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand) :- | 1 | Each | |
288 | 153 | Providing and fixing finolex gully trap complete with C.I. grating, brick masonry chamber in cement mortar 1:5 and water tight precast cemocrete cover with frame (medium duty) of 300 mm dia (inside) including carriage of materials within all leads and lifts | |||
289 | 153.01 | 180mmx100mm size P type | 2 | Each | |
290 | 153.02 | 180mmx150mm size P or R type | 2 | Each | |
291 | 154 | Constructing brick masonry in C.M 1:5 road gully chamber 500mmx450mmx600mm including 500mmx450mm C.I. Horizontal grating with frame complete. | 2 | Each | |
292 | 155 | Providing and installing Mono Block Electric pump 2 HP single phase of Kirloskar make or equivalent including fixing complete. | 1 | Each | |
293 | 156 | Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1 cement: 6 sand) per CMs. Depth of cutting :-Holes upto and including 400 Sq.cm in area. | 150 | Per cm.\ndepth of\ncutting | |
294 | 157 | Cutting holes upto 15 cm x 15 cm in R.C.C beams / floors and roofs for passing drain pipe etc. and repairing the holes after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof. | 30 | Each | |
295 | 158 | Supplying and fixing 300 mm X 300 mm precast RCC cover with frame for gully trap complete . | 20 | Each | |
296 | 159 | Supplying and filing brick bats in soakpit of following sizes including carriage of materials within all leads and lifts :- | 2.79 | Cum. | |
297 | 160 | Supplying and filing crushed stone aggregate in soakpitof following sizes. | |||
298 | 160.01 | 25 mm nominal size | 1.32 | Cum | |
299 | 160.02 | 12 mm nominal size | 1.32 | Cum | |
300 | 161 | Providing concrete plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 & 1203.(m-10) | 376.32 | Per cubic metre. | |
301 | 162 | Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted up to -50 grade i/c border or kurb block grey or colored over sub-base of concrete with 25mm thick average thickness of cement mortar1:4 laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing&polishing complete (Sub base concrete floor to be paid for 80mm thick inter locking blocks) | 1095.74 | Per Cubic metre. | |
302 | 163 | Providing and layinf filter media with granular material behind retaining wall/breast wall as per specification 1204.3.8 jin a width of 600mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge. | 32.46 | Per Cubic metre. | |
303 | 164 | Providing and laying in weep holes of retaining walls/ breast walls 100mm dia PVC(D-Plast) pipes of working pressure not less than 4.5 Kg per sqm. as per drawing and H.P.P.W.D. technical specifications. including the cost of form work and hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge. | 156 | Per Cubic metre. | |
304 | 165 | Supply and placing work top/ office table of Standared size the main table shall be free standing structure constructed with the help of wodden frame and block board. The work top consisting drawer and A movable type CPU unit shall be provided with key board unit in all leads and lift as per direction of Engineer-in -charge. | 21 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail