}

Renovation And Interior Works Of Office Space Including Workstation , Partition , False Ceiling , Civil , Ac Duct And Electrical Work For Fci At Scope Minar Core 4 On 2Nd Floor , Laxmi Nagar , New Delhi ., LAXMI NAGAR NEW DELHI-Delhi

Food Corporation Of India-FCI has published Renovation And Interior Works Of Office Space Including Workstation , Partition , False Ceiling , Civil , Ac Duct And Electrical Work For Fci At Scope Minar Core 4 On 2Nd Floor , Laxmi Nagar , New Delhi .. Submission Date for this Tender is 13-08-2020. Electrification Work Tenders in LAXMI NAGAR NEW DELHI Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

24978332
Renovation And Interior Works Of Office Space Including Workstation , Partition , False Ceiling , Civil , Ac Duct And Electrical Work For Fci At Scope Minar Core 4 On 2Nd Floor , Laxmi Nagar , New Delhi .
Open Tender
Indian
Delhi
LAXMI NAGAR NEW DELHI
13-08-2020

Tender Details

Renovation And Interior Works Of Office Space Including Workstation , Partition , False Ceiling , Civil , Ac Duct And Electrical Work For Fci At Scope Minar Core 4 On 2Nd Floor , Laxmi Nagar , New Delhi .

Key Value

Document Fees
INR 1180 /-
EMD
INR 384650.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: RENOVATION AND INTERIOR WORKS OF OFFICE SPACES INCLUDING WORKSTATION, PARTITION , FALSE CEILING, CIVIL, AC DUCTS AND ELECTRICAL WORK FOR FCI AT SCOPE MINAR CORE 4 ON 2ND FLOOR LAXMI NAGAR, NEW DELHI
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Civil Works BI01010001010000000000000515BI0100001112
2 1.01 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm BI01010001010000000000000515BI0100001116 1899.72 sqm
3 1.02 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. BI01010001010000000000000515BI0100001201 1342.99 sqm
4 1.03 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. BI01010001010000000000000515BI0100001202 2 cum
5 1.04 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:5:10 (1 cement : 5 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size). BI01010001010000000000000515BI0100001113 1 cum
6 1.05 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).\nSize of Tile 600x600 mm BI01010001010000000000000515BI0100001203 1487.4 sqm
7 1.06 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).\nSize of Tile 1000x1000 mm BI01010001010000000000000515BI0100001204 100 sqm
8 1.07 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.\nSize of Tile 600x600 mm BI01010001010000000000000515BI0100001205 1487.4 sqm
9 1.08 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.\nSize of Tile1000x1000 mm BI01010001010000000000000515BI0100001206 100 sqm
10 1.09 Partition work : Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete.\nKiln seasoned and chemically treated hollock wood BI01010001010000000000000515BI0100001118 2 cum
11 1.1 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: (part 3) : 1996 (Board with BIS certification marks) BI01010001010000000000000515BI0100001119 659.47 sqm
12 1.11 Glass Door : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge. (Door handle, lock and stopper etc.to be paid separately). BI01010001010000000000000515BI0100001120 68.67 sqm
13 1.12 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick. BI01010001010000000000000515BI0100001121 150 sqm
14 1.13 Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 12mm thick BI01010001010000000000000515BI0100001122 172.8 sqm
15 1.14 GLASS PARTITION : Supply and Fixing of Glass partition of 10mm Toughened Glass using slim line System-45 Frames clip in profile to a height of maximum 3m or as per drawing.The Fixed glass to be fixed using BP45 Profiles at Top & Bottom & fixed frame cleat . The profile size to be 45x20MM to be fixed on to the floor/ ceiling as per the architect design. H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design.In case of Glass overall panel MP45 & BP45 Overpanel Profile to be used.\nThe EPDM rubber shall be used for fixing glass of 10 mm .The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system.\nAll Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.\nApproved Manufacturer: Profiles/Frames: DORMA, Glass : Saint Giobain/Asahi Profile/frame: vertex venture. 188.99 sqm
16 1.15 Providing and Fixing Door Handle of minimum height of 600 mm with diameter / thickness of 25 mm - 40 mm made of 304 grade SS steel make Dorma/Ozone for glass door shutter of approved brand and manufacture, including all necessary fittings as per direction of Engg-in-charge. 36 each pair
17 1.16 Providing and Fixing Door ock of Dorma/Ozone make with finish 304 grade SS steel covering plate with atleast three keys for gass door shutter of approved brand and manufacture, including all necessary fittings all complete required fittings, as per direction of Engg-in-charge. 36 each
18 1.17 False Ceiling Work Plain Gypsum Board\nP/F false ceiling at all height i/c p/f of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of reqd. size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, i/c fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, i/c fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, i/c jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also i/c the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engg in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) 1342.99 sqm
19 1.18 METAL FALSE CEILING\nProviding and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.\nGI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 312.324 sqm
20 1.19 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 2511.93 sqm
21 1.2 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work. 1342.99 sqm
22 1.21 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two coats 1018.94 sqm
23 2 ELECTRICAL WORK, COLOR IP CCTV SYSTEM AND AUDIO VIDEO SYSTEM BI01010001010000000000000515BI0100001123
24 2.01 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch BI01010001010000000000000515BI0100001124 434 each
25 2.02 15/16 A switch BI01010001010000000000000515BI0100001125 21 each
26 2.03 3 pin 5/6 A socket outlet BI01010001010000000000000515BI0100001126 622 each
27 2.04 Telephone socket outlet BI01010001010000000000000515BI0100001127 192 each
28 2.05 Lan RJ-11 BI01010001010000000000000515BI0100001128 245 each
29 2.06 Wiring for circuit/ submain/Light Plug/ Power Plug wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 1.5 Sq mm + 1 X 1.5 Sq mm earth wire BI01010001010000000000000515BI0100001129 300 mtr
30 2.07 2 X 2.5 Sq mm + 1 X 2.5 Sq mm earth wire BI01010001010000000000000515BI0100001130 750 mtr
31 2.08 4 X 6 sq. mm + 2 X 6 sq. mm earth wire BI01010001010000000000000515BI0100001131 300 mtr
32 2.09 Supplying and drawing following pair 0.5 mm dia FRLS PVCinsulated annealed copper conductor, unarmored telephonecable in the existing surface/ recessed steel/ PVC conduit as required. 4 Pair BI01010001010000000000000515BI0100001132 5800 mtr
33 2.1 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable BI01010001010000000000000515BI0100001133 8000 mtr
34 2.11 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 20 mm BI01010001010000000000000515BI0100001134 5000 mtr
35 2.12 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) BI01010001010000000000000515BI0100001135 437 each
36 2.13 4 Module (125mmX75mm) BI01010001010000000000000515BI0100001137 266 each
37 2.14 6 Module (200mmX75mm) BI01010001010000000000000515BI0100001138 377 each
38 2.15 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC med. class conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C BI01010001010000000000000515BI0100001139 213 Point
39 2.16 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C BI01010001010000000000000515BI0100001140 116 Nos
40 2.17 Internal Lighting Fixtures\nSupplying Installation Testing & Commissioning of LED panel fitting,34 or 36 watt of size 600mmx600mmx65mm (approx) of C&S make category CYGNUS-C/36W/2x2/W, PHILIPS make category RC366BLED33-6500 PSU OD GR, HAVELLS make category LHECDNL7QL1W034, GE make category BTA22-3540-7S-T-LEU-35W, Crompton equivalent category, for recess mounting i/c minor wooden/ channel and gypsum work and making good the same etc. as required. BI01010001010000000000000515BI0100001141 28 each
41 2.18 Installation Testing & Commissioning of LED panel fitting,34 or 36 watt of size 600mmx600mmx65mm (approx) of C&S make category CYGNUS-C/36W/2x2/W, PHILIPS make category RC366BLED33-6500 PSU OD GR, HAVELLS make category LHECDNL7QL1W034, GE make category BTA22-3540-7S-T-LEU-35W, Crompton equivalent category, for recess mounting i/c minor wooden/ channel and gypsum work and making good the same etc. as required. BI01010001010000000000000515BI0100001142 50 each
42 2.19 Supplying Installation Testing & Commissioning of LED luminaire comprises of a deep drawn, CRCA housing cover with prewired accessories of size 1200mmx300mm, of make Havells cat no. LHEWEJP7PW1W036, Bajaj cat. No. BZRSQL 34W GX CW 1x4 of 34 Watt rating/ Cromption cat.no. LCPL-36-CDL (1x4) or equivelent cat. of Philips make, complete in all respect along with wiring connection with 1.5 sq.mm copper wire for recess mounted i/c minor wooden & gypsum work and making good the same with paint etc. as required. 24 each
43 2.2 Installation Testing & Commissioning of LED luminaire comprises of a deep drawn, CRCA housing cover with prewired accessories of size 1200mmx300mm, of make Havells cat no. LHEWEJP7PW1W036, Bajaj cat. No. BZRSQL 34W GX CW 1x4 of 34 Watt rating/ Cromption cat.no. LCPL-36-CDL (1x4) or equivelent cat. of Philips make, complete in all respect along with wiring connection with 1.5 sq.mm copper wire for recess mounted i/c minor wooden & gypsum work and making good the same with paint etc. as required. 160 each
44 2.21 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door BI01010001010000000000000515BI0100001143 5 each
45 2.22 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole BI01010001010000000000000515BI0100001144 30 each
46 2.23 Supply of Indoor 2MP Fixed Lens IR Network Dome Camera: \nCamera ½.8” Progressive Scan CMOS, True Day/ Night 2.0 Mega Pixel High Resolution, Built-in 3.6mm Lens, IR Range 20Mtrs., IP66 Protection Level, PoE/ 12VDC. Mdl No.: HWCHIE2PI, Make “HONEYWELL” BI01010001010000000000000515BI0100001179 16 each
47 2.24 Supply of 16 Channel Network Video Recorder (NVR): \n16 Channel Standalone Network Digital Video Recorder, 16 IP Video & Audio Inputs, 1 HDMI/ 1 VGA Output, Video Compression H.265/ H.264 PENTAPLEX Functions: Live/ Recording/ Playback/ Backup/ & Remote Access, GUI, Full & Multi Screen Display, Recording Based on Continuous, Motion Detection, 2 SATA Interfaces for 2 HDD’s, upto 6TB capacity for each HDD, Back up by USB or External DVD, USB Ports/ Mouse/ Power Supply. Mdl No.: HWCHANVR2216, Make “HONEYWELL” BI01010001010000000000000515BI0100001180 1 each
48 2.25 Supply of Professional Video Surveillance HDD for NVR: \nProfessional Video Surveillance Hard Disk, 6TB for NVR Make “SEAGATE/WD/ TOSHIBA” BI01010001010000000000000515BI0100001181 1 each
49 2.26 Supply of 24 Port Network PoE Switch: \n24 Port Gigabit Smart PoE Switch. Make “ZYXEL/ NETGEAR/ D-LINK” BI01010001010000000000000515BI0100001182 1 each
50 2.27 Supply of Wall Mount Rack for NVR & Network Switch: \n9U Wall Mount Network Rack complete with Accessories. Make “COMRACK/ D-LINK” BI01010001010000000000000515BI0100001183 1 each
51 2.28 Supply of Patch Panel/ Cable Manager & Patch Cord for Network Switch & Rack: -\n A) 24 Port UTP/ CAT6 Rack Mount Patch Panel, Die Cast. Make “D-LINK/ DIGILINK” BI01010001010000000000000515BI0100001184 1 each
52 2.29 b) UTP/ CAT6 Patch Cord, 1 Mtr., Grey/ Blue/ Yellow. Make “D-LINK/ DIGILINK” BI01010001010000000000000515BI0100001185 20 each
53 2.3 c) UTP/ CAT6 Cable Management Panel for Cable Routing. Make “COMRACK” BI01010001010000000000000515BI0100001186 1 each
54 2.31 Supply of 43” Commercial LED Display Panel: \n43” Full HD LED Panel, High Resolution, 2 HDMI Ports USB Port/ VGA Port, Table Mount/ Wall Mountable. Make “PANASONIC”/ “LG” BI01010001010000000000000515BI0100001187 1 each
55 2.32 Supply of HDMI Cable for NVR & Commercial LED Display Panel: \nHDMI Cable 3.0Mtrs in Length with Connectors for NVR & LED Display Panel. Make “WBOX/ “MX” BI01010001010000000000000515BI0100001188 1 each
56 2.33 Cabling & Wiring: \nSupply & Laying of CAT6 UTP Armoured 23AWG Bare Solid Copper Cable 6.0mm Diameter, 4 Twisted Pair, PVC, Grey Color overground on exisitng Trays/ False Ceiling with Clamps. Make “DIGILINK/ D-LINK” BI01010001010000000000000515BI0100001189 1220 mtr
57 2.34 Installation/Testing/Commissioning/Training & One Year Service/Support for all above items BI01010001010000000000000515BI0100001190 1 job
58 2.35 Supply of Ceiling Mount Speaker: \n6 Watt Ceiling Mount Speaker, Built-in-Line Matching Transformer.\nMdl No. : LBD06006, Make "BOSCH" BI01010001010000000000000515BI0100001191 4 each
59 2.36 Supply of All In One P.A. Mixer Amplifier : \nP.A. Mixer Amplifier, 90Watts, 4Mic. Input with Flexible volume adjustment , USB Drive & SD Card for MP3 Playback. \nMdl No. : PLN-1AIO90-IN, Make "BOSCH" BI01010001010000000000000515BI0100001192 1 each
60 2.37 Supply of Wireless Microphone : \nWireless Microphone Kit with Receiver and Cardiod Lavalier Mic Collar Mic. \nMdl No. : MISMR515L, Make "MIPRO" BI01010001010000000000000515BI0100001193 1 each
61 2.38 Supply of Wireless Microphone : \nWireless Microphone Kit with Receiver and Cardiod Handheld Mic. \nMdl No. : MISMR515L, Make "MIPRO" BI01010001010000000000000515BI0100001194 1 each
62 2.39 Supply of 55" Commercial LED Display Panel : \n55" Full HD LED Panel, High Resolution, 2 HDMI ports, USB port/ VGA port, Table Mount/ Wall Mountable. \nMdl No. : LH-55UMP2KD, Make "PANASONIC" BI01010001010000000000000515BI0100001195 1 each
63 2.4 Supply of Cabling & Wiring : \nSupply of unarmoured 2 Core Audio/ Speaker Cable. BI01010001010000000000000515BI0100001196 100 mtr
64 2.41 Supply of Cabling & Wiring : \nSupply of HDMI 2.0 Cable, 15 Mtrs. In Length with Connectors. BI01010001010000000000000515BI0100001197 1 each
65 2.42 Installation/Testing/Commissioning/Training & One Year Service/Support for Audio-Video System ( i.e. all above items) BI01010001010000000000000515BI0100001198 1 job
66 2.43 Credit of old old electrical items, false ceiling and AC ducting etc. lying at site as is where is bases. (LS) BI01010001010000000000000515BI0100001301 1 LS
67 3 A.C.Ducts BI01010001010000000000000515BI0100001145
68 3.01 Air Supply Duct Supply, Fabrication & Installation of Site Fabricated Rectalgular Ducting (fabrication as per IS:655) with MS hangers, Bracing, MS Frames, of the following sizes complete in all respects. 24 Gauge BI01010001010000000000000515BI0100001148 750 sqm
69 3.02 22 Guage BI01010001010000000000000515BI0100001149 150 sqm
70 3.03 20 Gauge BI01010001010000000000000515BI0100001150 100 sqm
71 3.04 Supply, installation, testing & commissioning of Nitrile rubber insulation with UV protection on exposed duct BI01010001010000000000000515BI0100001151 1050 sqm
72 3.05 Supply and installation of Canvass connection for connection from machine to duct BI01010001010000000000000515BI0100001152 2 Nos
73 3.06 Supply & installation of extruded Aluminium Powder coated Supply Air linear grilles for supply of air BI01010001010000000000000515BI0100001153 37 sqm
74 3.07 Supply & installation of volume controlling dampers to control supply of air BI01010001010000000000000515BI0100001154 17.5 sqm
75 3.08 Duct Damper BI01010001010000000000000515BI0100001155 10 sqm
76 3.09 Fire Damper BI01010001010000000000000515BI0100001156 8 sqm
77 3.1 Actuator BI01010001010000000000000515BI0100001157 12 each
78 4 Furniture Work BI01010001010000000000000515BI0100001158
79 4.01 WORKSTATION Size w(1395x 1395) x d450 xh1200 FOR CAT-III STAFF\nProviding and fixing in position non grouting panel based aluminium partition 1200mm high and 46mm thick. The partition shall comprise of 2 vertical upright aluminium member which holds panels in place with screws rigidly. The vertical uprights shall be made of specially extruded aluminium section of 1.2mm thick specially designed and extruded aluminium sections. The bottom horizontal shall be 1.2mm thick aluminium channel of dimension to carry wires through out the width of the panels. Top trims shall be made up of aluminium extrusion. The bottom horizontal shall have 2 slots for entry of wires into the system. The top is supported on horizontal middle member and can be supported on various points to give more rigidity. Horizontal middle member shall have provision for fixing table top throughout partition width span. Table top supporting brackets can be mounted at suitable distance so that there is no gap between table top and partition. CRCA metal connecters are used to join junction post i.e where horizontal and vertical raceway meet. A snap fit specially designed and extruded powder coated aluminium raceway shall be provided.Aluminium raceway cover shall be provided at the bottom level and at the belting level above or 6” below the work surface wherever it is required. Raceway cover shall be of specially extruded aluminium section of HE9WP grade and provided with or without cut outs, wherever required, for mounting of switches.\nTop member has provision mounting pen holder, pencil holder, file holder and paper tray etc through grove. Tac-able fabric/laminated of approved quality and desired shade shall be provided wherever required. Fabric tac-able tiles shall consist of metal sheet frames of inlay of 6mm thick foam. Fabric of approved shades shall be provided. Work top shall be made of 25mm thick Pre laminated Particle Board conforming to IS:3087:1985.. All the edges of work surface shall be provided with machine pressed 2mm thick PVC lipping gluded with hotmelt EVA glue. Worktop shall be mounted on to partition panels and drawer for work stations by means of brackets made of 1.6mm thick CRCA grade D steel as per IS:513-1994 duly pre treated and powder coated in black colour. The work surfaces shall be provided with circular cut out of Dia. 60mm as per requirement, for passing of wires. These cut outs shall be provided with ABS covers. BI01010001010000000000000515BI0100001159
80 4.02 Pedestal Drawer Unit:- The Pedestal Unit of Dimensions 400W x 450D x 675mmH shall be made of 18mm thick pre laminated partical Board conforming to shall be : 12823 Interior Grade. All the exposed edges shall be sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia shall be sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box shall be fitted with roller Slide for free movement. The drawer unit shall be provided with central locking system, where in the two drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit shall be fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit shall be factory assembled with knock down fittings. The pedestal shall be fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 2 drawers. METAL KEYBOARD TRAY:- Made of minimum 0.8mm thick CRCA steel ,to be finished with 8 steps anti rust surface treatment .With Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws.\nCPU TROLLEY:- CPU trolley shall be made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley shall be mounted on lockable castors from reputed manufacturers in India. BI01010001010000000000000515BI0100001160 87 each
81 4.03 WORKSTATION Size w1500 x d600 xh1200 FOR MANAGER\nProviding and fixing in position non grouting panel based aluminium partition 1200mm high and 46mm thick. The partition shall comprise of 2 vertical upright aluminium member which holds panels in place with screws rigidly. The vertical uprights shall be made of specially extruded aluminium section of 1.2mm thick specially designed and extruded aluminium sections. The bottom horizontal shall be 1.2mm thick aluminium channel of dimension to carry wires through out the width of the panels. Top trims shall be made up of aluminium extrusion. The bottom horizontal shall have 2 slots for entry of wires into the system. The top is supported on horizontal middle member and can be supported on various points to give more rigidity. Horizontal middle member shall have provision for fixing table top throughout partition width span. Table top supporting brackets can be mounted at suitable distance so that there is no gap between table top and partition. CRCA metal connecters are used to join junction post i.e where horizontal and vertical raceway meet. A snap fit specially designed and extruded powder coated aluminium raceway shall be provided Aluminium raceway cover shall be provided at the bottom level and at the belting level above or 6” below the work surface wherever it is required. Raceway cover shall be of specially extruded aluminium section of HE9WP grade and provided with or without cut outs, wherever required, for mounting of switches. Top member has provision mounting pen holder, pencil holder, file holder and paper tray etc through grove. Tac-able fabric/laminated of approved quality and desired shade shall be provided wherever required. Fabric tac-able tiles shall consist of metal sheet frames of inlay of 6mm thick foam. Fabric of approved shades shall be provided. Work top shall be made of 25mm thick Pre laminated Particle Board conforming to IS:3087:1985.. All the edges of work surface shall be provided with machine pressed 2mm thick PVC lipping gluded with hotmelt EVA glue. Worktop shall be mounted on to partition panels and drawer for work stations by means of brackets made of 1.6mm thick CRCA grade D steel as per IS:513-1994 duly pre treated and powder coated in black colour. The work surfaces shall be provided with circular cut out of Dia. 60mm as per requirement, for passing of wires. These cut outs shall be provided with ABS covers BI01010001010000000000000515BI0100001161
82 4.04 Pedestal Drawer Unit:- The Pedestal Unit of Dimensions 400W x 450D x 675mmH shall be made of 18mm thick pre laminated partical Board conforming to shall be : 12823 Interior Grade. All the exposed edges shall be sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia shall be sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box shall be fitted with roller Slide for free movement. The drawer unit shall be provided with central locking system, where in the two drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit shall be fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit shall be factory assembled with knock down fittings. The pedestal shall be fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 2 drawers.\nMETAL KEYBOARD TRAY:- Made of minimum 0.8mm thick CRCA steel ,to be finished with 8 steps anti rust surface treatment .With Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws.\nCPU TROLLEY:- CPU trolley shall be made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley shall be mounted on lockable castors from reputed manufacturers in India. BI01010001010000000000000515BI0100001162 48 each
83 4.05 GLASS DIVIDER\nProviding and fixing 900mm x 450mm x 6 mm toughned glass fixed on D bracket on Working top as per requirement. BI01010001010000000000000515BI0100001163 40 each
84 4.06 STORAGE\nw 450/600/900/1000/1100/1200/1700 (As per requirement/ Furniture Drawing ) xd450xh1200mm\nProviding & Fixing of Cabinets with Side , top, bottom panels and two nos. shelves shall be made of prime Quality 18mm pre-laminated particle board of grade II Type II conforming to IS:12823: 1990 . All the exposed edges are sealed with machine pressed 2mm thick PVC edge band with hot melt glue. It shall have rigid knock down construction. \nFacia : The cabinet shutters are Hinged Door openable type made from 18mm pre-laminated particle board with all edges sealed with 2mm PVC lipping Hindges shall be made oh hettitch or equivalent. \nHandles : Handle shall be aesthetically designed D handles in SS finish\nLocking Mechanism: Locking Mechanism shall be front mounting 7 lever lock of ebbco or equvialent. \nLevellor: It also have adjustable Leveler with plastic base with height adjustment up to 15mm. The above furniture shall be as per specification and sample approved by client. BI01010001010000000000000515BI0100001164 54.44 sqm
85 4.07 PA Table\nPA TABLE - MAIN TABLE : 1500mmx750mmx 750mm, SIDE TABLE: 900 mm x 450mm x 720mm\nPROVIDING AND FIXING OF Size of the main table shall be 1500 Width mm x 750 Depth mm x 750 Height mm. The table top shall be made up of 25mm thick plain particle board (PPB) clad with 0.6mm thick laminate and 1mm thick backing laminate (BDL). It shall have flat edges duly sealed with 2mm thick machine fitted PVC beading. Modesty panel shall be 18mm thick plain particle board (PPB) clad with 1.0mm thick decorative laminate (DL) on both sides. The edges shall be sealed with 2mm thick machine fitted PVC beading. The side table shall be provided of size 900mm width x 450mm depth x 705mm height. Top thickness shall be 25mm thick of plain particle board (PPB) clad with 0.6mm thick laminate and 1mm thick backing laminate (BDL). It shall have flat edges duly sealed with 2mm thick PVC beading. Modesty panel shall be provided of 18mm thick plain particle board (PPB) clad with 1.0mm thick decorative laminate (DL) on both sides. The edges shall be sealed with 2mm thick PVC beading BI01010001010000000000000515BI0100001165
86 4.08 Pedestal Drawer Unit:- The Pedestal Unit of Dimensions 400W x 450D x 675mmH shall be made of 18mm thick pre laminated partical Board conforming to shall be : 12823 Interior Grade. All the exposed edges shall be sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia shall be sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box shall be fitted with roller Slide for free movement. The drawer unit shall be provided with central locking system, where in the two drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer.\n The drawer unit shall be fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit shall be factory assembled with knock down fittings. The pedestal shall be fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 2 drawers.\nMETAL KEYBOARD TRAY:- Made of minimum 0.8mm thick CRCA steel ,to be finished with 8 steps anti rust surface treatment .With Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws.\nCPU TROLLEY:- CPU trolley shall be made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley shall be mounted on lockable castors from reputed manufacturers in India. BI01010001010000000000000515BI0100001166 8 each
87 4.09 AGM TABLE - MAIN TABLE : 1650mmx750mmx 750mm, SIDE TABLE: 900 mm x 450mm x 720mm\nMAIN TABLE: PROVIDING AND FIXING OF Size of the main table shall be 1650 Width mm x 750 Depth mm x 750 Height mm. The table top shall be made up of 25mm thick plain particle board (PPB) clad with 0.6mm thick post formed laminate and 1mm thick backing laminate (BDL). It shall have flat edges duly sealed with 2mm thick machine fitted PVC beading. Modesty panel shall be 18mm thick plain particle board (PPB) clad with 1.0mm thick decorative laminate (DL) on both sides. The edges shall be sealed with 2mm thick machine fitted PVC beading. Table base shall be in ms structure in square pipe dully powder coated upto 50-60 microns. \nSIDE UNIT: The side table shall be provided of size 900mm width x 450mm depth x 750mm height. Top thickness shall be 25mm thick of plain particle board (PPB) clad with backing laminate (BDL). It shall have flat edges duly sealed with 2mm thick PVC beading. Modesty panel shall be provided of 0.8mm thick CRCA Perforated sheet dully powder coat to 50-60 microns. The edges shall be sealed with 2mm thick PVC beading. Pedestal Drawer Unit:- The Pedestal Unit of Dimensions 400W x 450D x 675mmH shall be made of 18mm thick pre laminated partical Board conforming to shall be : 12823 Interior Grade. All the exposed edges shall be sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia shall be sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box shall be fitted with roller Slide for free movement. The drawer unit shall be provided with central locking system, where in the two drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. BI01010001010000000000000515BI0100001167
88 4.1 The drawer unit shall be fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit shall be factory assembled with knock down fittings. The pedestal shall be fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 2 drawers.\nMETAL KEYBOARD TRAY:- Made of minimum 0.8mm thick CRCA steel ,to be finished with 8 steps anti rust surface treatment .With Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws.\nCPU TROLLEY:- CPU trolley shall be made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley shall be mounted on lockable castors from reputed manufacturers in India. BI01010001010000000000000515BI0100001168 23 each
89 4.11 DGM TABLE - MAIN TABLE : 1800mmx900mmx 750mm, SIDE TABLE: 900 mm x 450mm x 720mm, BACK UNIT : 1800mm x 450mm x 720mm \nPROVIDING AND FIXING OF Size of the main table shall be 1800mm width x 900mm depth x 750mm height. The table top shall be 25 mm thick prelam particle board with 6mm laqured glass placed on top.The leg of the main desk shall be of ms structure dully powder coated to 50-60 microns. The main table shall be of duck noise profile edge in order to enhance the workspace aesthetics. .\nSide unit: shall be of size 900mm width x 450mm depth x Height 700mm whose table top shall be of 25mm thick PPB modesty panel of 18mm. Side unit shall have combination of drawers and shutter. The construction shall be knock down type. Back unit size shall be 1800 Width mm x 450 Depth mm x 300 Height mm.The top panel size shall be 25 mm thick PPB . The door panels and all other panels shall be 18 mm thick PPB (Pre lam Particle Board) in high gloss Laminate. BI01010001010000000000000515BI0100001169
90 4.12 Pedestal Drawer Unit:- The Pedestal Unit of Dimensions 400W x 450D x 675mmH shall be made of 18mm thick pre laminated partical Board conforming to shall be : 12823 Interior Grade. All the exposed edges shall be sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia shall be sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box shall be fitted with roller Slide for free movement. The drawer unit shall be provided with central locking system, where in the two drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit shall be fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit shall be factory assembled with knock down fittings. The pedestal shall be fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 2 drawers.\nMETAL KEYBOARD TRAY:- Made of minimum 0.8mm thick CRCA steel ,to be finished with 8 steps anti rust surface treatment .With Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws.\nCPU TROLLEY:- CPU trolley shall be made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley shall be mounted on lockable castors from reputed manufacturers in India. BI01010001010000000000000515BI0100001170 11 each
91 4.13 CGM TABLE - MAIN TABLE : 2100mmx1050mmx 750mm, SIDE UNIT: 900 mm x 450mm x 720mm, DRAWER UNIT : 510mm x 635mm x 445mm, BACK UNIT: 2100mm x 450mm x 720mm\nPROVIDING AND FIXING OF The overall size of the Main table shall be 2100mm width x 1050mm depth x 750mm height. The top thickness shall be 65mm & shall be made up of MDF + Veener + PU Coating. The Main desk shall contain in built key board pull out tray for keeping keyboard of computer. The size of the modesty panel at the front shall be made up of MDF + Veener + PU Coating. \nDrawer unit : shall be of size 510mm width x 635mm height x 445 depth made up of MDF + Veener + PU Coating.\nThe side unit: shall be of size 900mm width x 445mm depth x 660mm height & its top thickness shall be of 25mm consisting of MDF + Veener + PU coating. The side unit design shall be such that it shall be capable of keeping on either side of the user. The side unit shall have space to place cpu, one closed door cabin & one open cabin with shelf in between to keep files/ documents. \nBack unit: size shall be 2100 Width mm x 450 Depth mm x 300 Height mm.The top panel size shall be 25 mm thick PPB .The thickness of the top of the side unit shall be 25mm. Hardness of PU coating shall be 1.5H. \nMETAL KEYBOARD TRAY:- Made of minimum 0.8mm thick CRCA steel ,to be finished with 8 steps anti rust surface treatment .With Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws\nCPU TROLLEY:- CPU trolley shall be made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley shall be mounted on lockable castors from reputed manufacturers in India BI01010001010000000000000515BI0100001171 1 each
92 4.14 GM TABLE - MAIN TABLE : 1950mmx975mmx 750mm, SIDE UNIT: 900mm x 450mm x 720mm , BACK UNIT: 1950 mm x 450mm x 720mm\nPROVIDING AND FIXING OF Size of the Main table shall be 1950mm width x 975mm depth x 750mm height. The table top shall be 25 mm thick prelam particle board with 6mm laqured glass placed on top.The leg of the main desk shall be of ms structure dully powder coated to 50-60 microns. The main table shall be of duck noise profile edge in order to enhance the workspace aesthetics.\nSide unit shall be of size 900mm width x 450mm depth x Height 700mm whose table top shall be of 25mm thick PPB modesty panel of 18mm PPB. Side unit shall have combination of drawers and shutter. The construction shall be knock down type. \nBack unit size shall be 1950 Width mm x 450 Depth mm x 300 Height mm.The top panel size shall be 25 mm thick PPB . The door panels and all other panels shall be 18 mm thick PPB (Pre lam Particle Board) in high gloss Laminate .The handle shall be of metal.\nMETAL KEYBOARD TRAY:- Made of minimum 0.8mm thick CRCA steel ,to be finished with 8 steps anti rust surface treatment .With Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws.\nCPU TROLLEY:- CPU trolley shall be made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley shall be mounted on lockable castors from reputed manufacturers in India. BI01010001010000000000000515BI0100001172 5 each
93 4.15 ED TABLE - MAIN TABLE : 2400mmx1200mmx 750mm, SIDE UNIT: 1200 mm x 450mm x 720mm, DRAWER UNIT: 510mm x 635mm x 445mm, BACK UNIT : 2400mm x 450mm x 720mm\nPROVIDING AND FIXING OF The overall size of the Main table shall be 2400mm width x 1200mm depth x 750mm height. The top thickness shall be 65mm & shall be made up of MDF + Veener + PU Coating. The Main desk shall contain in built key board pull out tray for keeping keyboard of computer. The modesty panel at the front shall be made up of MDF + Veener + PU Coating. \nDrawer unit shall be of size 510mm width x 635mm height x 445 depth made up of MDF + Veener + PU Coating\nThe side unit shall be of size 1200mm width x 445mm depth x 660mm height & its top thickness shall be of 25mm consisting of MDF + Veener + PU coating. The side unit design shall be such that it shall be capable of keeping on either side of the user. The side unit shall have space to place cpu, one closed door cabin & one open cabin with shelf in between to keep files/ documents. The thickness of the top of the side unit shall be 25mm. Hardness of PU coating shall be 1.5H. \nBack Storage Unit shall be of size 2400mm width x 450mm depth x 2100mm height made up of MDF + Veener + PU Coating & Glass in the doors similar to the one provided in the Office Suite-1. Glass used shall be of thickness min 5mm. The hardness of the PU Coating shall be 1.5H. The construction shall be knock down type.\nMETAL KEYBOARD TRAY:- Made of minimum 0.8mm thick CRCA steel ,to be finished with 8 steps anti rust surface treatment .With Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws.\nCPU TROLLEY:- CPU trolley shall be made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley shall be mounted on lockable castors from reputed manufacturers in India. BI01010001010000000000000515BI0100001173 1 each
94 4.16 "RECEPTION TABLE: FOR 3 PERSONS , MAIN TABLE: 3665mm x 1060mm x 1035mm CURVILINEAR \nAll Dim in MM with open tolerance of +/- 10mm\nProviding and placing of Reception table of size: 3665Wx1060Dx1035H. The work surface shall be of Laminate. Desk shall be made of rubber wood top, cork and glass. The rubber wood top shall be of clean Matt PU finish 18 mm thick , inside radius - 700 mm , outside radius - 1350 mm and depth - 650 mm . Cork shall be 18 mm thick of rubber . Glass shall be Fostered 10 mm thick diamond cut finishing on edges , inside radius shall be - 1202.5 mm , outside radius - 1402.5 mm and depth - 200 mm . The Modesty Panel shall be MS Perforated sheet below work surface : 0.8 mm (thick) x 665 mm ( height) x 1345 mm (flat length ) . Above Work surface : 0.8 mm (thick ) x 260 mm (height) x 1345 mm (flat length) . The legs shall be of MS tube 1.6 mm thick diameter 50.8 mm and height 604 mm"
95 4.17 Pedestal Drawer Unit:- The Pedestal Unit of Dimensions 400W x 450D x 675mmH shall be made of 18mm thick pre laminated partical Board conforming to shall be : 12823 Interior Grade. All the exposed edges shall be sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia shall be sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box shall be fitted with roller Slide for free movement. The drawer unit shall be provided with central locking system, where in the two drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer.\nThe drawer unit shall be fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit shall be factory assembled with knock down fittings. The pedestal shall be fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 2 drawers.\nMETAL KEYBOARD TRAY:- Made of minimum 0.8mm thick CRCA steel ,to be finished with 8 steps anti rust surface treatment .With Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws.\nCPU TROLLEY:- CPU trolley shall be made from 1mm Thick CRCA steel sheet. The width of the trolley can be varied for accommodating various widths of CPUs; The trolley shall be mounted on lockable castors from reputed manufacturers in India. BI01010001010000000000000515BI0100001174 1 each
96 4.18 BACK STORAGE UNIT: - 900x425x740, Storage body shall be made of 18mm thick pre laminated partical Board conforming to shall : 12823 Interior Grade, The back of the unit shall be made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. PVC edge banding are imported from Rehau or Dolken of Germany. BI01010001010000000000000515BI0100001176 3 each
97 4.19 CONFERENCE TABLE U-SHAPED DESKING AND SEATING - 18 SEATER (1350x600x740) FOR 2 SEAT AND (675x600x740) FOR 1 SEAT\nAll Dim in MM with open tolerance of +/- 10mm\nModular System for 28 seating in size of 1350x600x740 for two seats and 675x600x740 for one seat capacity with Table Top made of 25mm thick MDF with waterfall trop edge finshed in pvc memberane using unique wrap around for better aesthetics & long lasting use. Understructure - Legs are made of 25mm thick standard black matt colour post formed panels connected with 18mm thick std black prelaminated modesty panels. Wire management - conecaled wire management to take care both horizontally & vertically. For open configurations, wire channel shall be mounted on the inner side of modesty panel for horizontal wire carrying. Vertical wire management shall be through flexible wire manager. Std table top height shall be 740mm, pvc membrane tops areseamless surface, post formed legs for safe use. BI01010001010000000000000515BI0100001177 1 each
98 4.2 Credit of old Table and Cabinet etc. lying at site as is where is bases. BI01010001010000000000000515BI0100001199 1 LS
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail