}

Construction Of Veterinary Dispensary At Tikka ( Bhadrol ) Teh Nadaun Distt . Hamirpur ( Hp ) . , Tikka(Bhadrol)-Himachal Pradesh

Himachal Pradesh State Industrial Development Corporation Limited-HPSIDC has published Construction Of Veterinary Dispensary At Tikka ( Bhadrol ) Teh Nadaun Distt . Hamirpur ( Hp ) . . Submission Date for this Tender is 30-07-2020. Building Work Tenders in Tikka(Bhadrol) Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

24878333
Construction Of Veterinary Dispensary At Tikka ( Bhadrol ) Teh Nadaun Distt . Hamirpur ( Hp ) .
Open Tender
Indian
Himachal Pradesh
Tikka(Bhadrol)
30-07-2020

Tender Details

Construction Of Veterinary Dispensary At Tikka ( Bhadrol ) Teh Nadaun Distt . Hamirpur ( Hp ) .

Key Value

Document Fees
INR 1300 /-
EMD
INR 23700.0 /-
Tender Value
INR 11.81 Lakhs /-

BOQ Items

Name of Work: Construction of Veterinary Dispensary at Tikka (Bhadrol) Teh. Nadaun Distt. Hamirpur (HP).
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in Foundations, trenches etc. in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification 171.62 Cum.
2 2.01 Providing form work with steel plates (3.15mm) three point fifteen milimetre thick welded with angle iron in frame (30x30x5mm) ( Thirty x thirty x five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mtr.(Four metre) Including carriage of material with in all leads and lifts. (a). Foundations, footings & bases of columns etc., and mass concrete. 12 Sqm.
3 2.02 (B). Column, pillars, posts and struts. (i). Square, rectangular or polygonal in plan. 50.4 Sqm.
4 2.03 (C). Beams, cantilevers, girders and lintels. i. Sides and soffits of beams, beam haunching, cantilevers, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor. 64.99 Sqm.
5 2.04 (D).Flat surfaces such as soffits of suspended floors, roofs, landing and the like. ( i). Floors etc., upto 200mm( Two hundred milimetre) in thickness. 90.01 Sqm.
6 2.05 (e). Edges of slabs and breaks in floors and walls: 58.62 Rmt.
7 2.06 F) Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like. 48 Sqm.
8 3 Providing and laying cement concrete 1:6:12 (one cement :six sand :twelve graded stone aggregate 40mm nominal size)(Forty milimetre) and curing complete excluding cost of form work in foundation and plinth including carriage of materials upto all leads and lifts. 16.29 Cum.
9 4 Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 Graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc. including carriage of materials upto all leads and lifts. 11.25 Cum.
10 5 Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of materials upto all leads and lifts. 6.01 Cum.
11 6.01 Providing and laying cement concrete 1:1.5:3 (One cement : one point five sand :Three graded stone aggregate 20mm nominal size)( Twenty milimetre) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (a) Foundations, footings, bases of columns and the like and mass concrete. 5.49 Cum.
12 6.02 (b). Columns, pillars, posts and struts in all floor levels. 4.05 Cum.
13 6.03 (c). Suspended floors, roofs, landings and shelves and their support balconies, beams, girders, bressumers and cantilevers in all floor levels. 20.38 Cum.
14 7 Providing mild steel/tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all floor levels (a). Tor steel. including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. 2992 K.g.
15 8 Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Sand) First Class Bricks including carriage of material within all leads and lifts. 41.92 Cum.
16 9 Brick work using common burnt clay building bricks in superstructure in Cement Mortar 1:6 (1 Cement : 6 Sand) First Class Bricks including carriage of material within all leads and lifts. 48.71 Cum.
17 10.01 Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. \nA)For doors windows and ventilatiors and glazed partitions frames including carriage of material within all leads and lifts. 121.37 Kg.
18 10.02 B) For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) 176.87 Kg.
19 11 Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) including carriage of material within all leads and lifts. 9.72 Sqm.
20 12 Particle board bwp phenol bonded exterior/interior grade in partitions Prelaminated board bwp phenol bonded exterior/interion grade both sides. 12mm thick including carriage of material within all leads and lifts. 5.25 Sqm.
21 13 Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 140 g with wire of dia 0.71 mm to windows and clerestory windows including beading of aluminium including carriage of material within all leads and lifts. 13.92 Sqm.
22 14 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre including carriage of material within all leads and lifts. 21.38 Kg.
23 15 Providing and fixing oxidized M.S. sliding door bolts with nuts and screws etc. complete including carriage of material within all leads and lifts. (a) 300X16 mm 3 Each
24 16.01 Providing and fixing anodized aluminium tower bolt (barrel type) anodized transparent or dyed to required shade and colour with screws etc., complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. ( a). 250x10mm 10 Each
25 16.02 ( b). 150x10mm 40 Each
26 17.01 Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc., complete: including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (i) 125mm.( One Hundred Twenty Five milimetre) 10 Each
27 17.02 (i) 100mm.( One Hundred milimetre) 20 Each
28 18 Half brick work using common burnt clay building bricks in super structure above plinth level upto floor all level using second class building bricks in cement mortar 1:4 (1cement : 4sand) including carriage of materials upto all leads and lifts and as per the direction of Engineer in charge. 14.46 Sqm.
29 19 6mm (Six milimetre) cement plaster to ceiling in cement mortar 1:3 (One Cement is to three Sand) in all floor level. The rate isincluding carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. 59.3 Sqm.
30 20 15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. 186.08 Sqm.
31 21 15mm (fifteen milimetres) thick 1 in single coat on fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth within all leads, lifts and as per the direction of Engineer-in-Charge. 296.06 Sqm.
32 22 Applying Birla white wall care putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts 383.06 Sqm.
33 23 Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of materials within all leads and lifts 245.38 Sqm.
34 24 Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of materials within all leads and lifts 137.68 Sqm.
35 25 Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including carriage of materials within all leads and lifts 158.38 Sqm.
36 26 Steel work welded in built up sections, trusses and framed work,including cutting , hoisting ,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars, ladders, railling, brackets and similar works including carriage of materials within all leads and lifts 5.62 Qtl.
37 27 Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. 54.6 Sqm.
38 28 Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty doublecharged vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials within all leads and lifts 50.7 Sqm.
39 29 Providing and Laying of Interlocking Concrete Blcok Pavements having thickness 60 mm ISI Marked as per drawing and Technical Specification Clause 1504 complete including carriage of materials within all leads and lifts 30 Sqm.
40 30 White glazed / Coloured Digital tiles 6 mm ( six millimetre) thick in skirting risers of steps and dado of size 20×30cm nitco or its equivalent of approved make and size 12mm ( Twelve milimetre) thick cement mortar 1:3 (one cement isto three sand) and jointing with neat cement slurry including carriage of material within all leads and liftrs : 12.39 Sqm.
41 31 Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement complete including carriage of materials within all leads and lifts 4.6 Sqm.
42 32 Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground complete including carriage of materials within all leads and lifts 18.61 Sqm.
43 33 Finishing with floating coat of neat cement slurry incluidng of material within all leads and lifts. 40.8 Sqm.
44 34 Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished 40 mm thick. complete including carriage of materials within all leads and lifts 12 Sqm.
45 35 Providing and fixing on wall face PVC(D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqmincluding filling the joints withapproved adhesive complete. 100mm dia pipes complete including carriage of materials within all leads and lifts 8 Rmt.
46 36 Providing and fixing m.s.holder batclamps of approved design to C.I.or S.C.I pipes embeded in andincluding cement concrete blocks 10x10x10 cm of 1:2:4:mix (1 cement 2sand 4 stone graded stone aggregate20 mm nominal size) and cost ofcutting holes and making good the 100 mm diametre complete including carriage of materials within all leads and lifts 6 Each
47 37 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 0.19 Cum.
48 38 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 0.19 Cum.
49 39 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 0.19 Cum.
50 40 Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint complete including carriage of materials within all leads and lifts 4.2 Sqm.
51 41 Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 complete including carriage of materials within all leads and lifts 8 Each
52 42 Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 Granular material complete including carriage of materials within all leads and lifts 3.6 Cum.
53 43 Constructing manhole with R.C.C top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing: Inside size 800mm x 800mm and 500mm deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mmx610mm internal dimensions total weight of cover and frame to be not less than 38kg. (Weight of cover 23 kg and weight of frame 15 kg.) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3) complete including carriage of materials within all leads and lifts 3 Each
54 44 Constructing chamber 600mm x 600mmx750mm inside size with C.I. surface box 350mmx 550mm top and 165 mm deep (inside) with changed lid and RCC top slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 100mm thick foundation concrete 1:5:10 ( 1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete With 200mm thick walls of brick Masonry in cement mortar 1:5 (1cement :5 sand) complete including carriage of materials within all leads and lifts 3 Each
55 45.01 Providing and fixing to wall ceilling and floor galvainised mild steeel tubes(medium grade)tube fittings and clamps including making good the wall including carriage of material within all leads and lifts. (a) 15 mm nominal bore. 30 Rmt
56 45.02 (a) 20 mm nominal bore. 40 Rmt
57 46 Making connection of galvainised steel distribution branch with galvainised mild steel main 20mm to 40mm nominal bore by providing and fixing Tee including cutting and threading the pipes complete including carriage of material within all leads and lifts. 2 Each
58 47 Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm dia. complete including carriage of materials within all leads and lifts 30 Rmt
59 48 Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. Plain bend 110 mm nominal size. complete including carriage of materials within all leads and lifts 8 Each
60 49 Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. 110 mm dia complete including carriage of materials within all leads and lifts 3 Each
61 50 Providing and fixing pvc cowl 110mm dia including carriage of material complete including carriage of materials within all leads and lifts 1 Each
62 51 Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm complete including carriage of materials within all leads and lifts 3 Each
63 52 Providing and fixing Vitreous china wash down, water closet ( European type W.C pan) Cream shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1 Cement :1 Sand ) ( Seat and over to be measured and paid for separately) including carriage of material within all leads and lifts. Ordinary closet. complete including carriage of materials within all leads and lifts 1 Each
64 53 Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.110mm dia complete including carriage of materials within all leads and lifts 1 Each
65 54 Providing and fixing PVC Coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material within all leads and lifts. 1 Each
66 55 Providing and fixing GI inlet connection for flush pipe with WC pan including carriage of material within all leads and lifts. 4 Each
67 56 Providing and fixing vitreous china wash basin Cream Shade with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings.Flat back630x450mm including carriage of material within all leads and lifts. 1 Each
68 57 Providing and fixing CP brass waste for wash basin or sink 32 mm dia including carriage of material within all leads and lifts 2 Each
69 58 Providing and fixing 100m sand cast iron grating for gully,foor or Nahani trap including carriage of material within all leads and lifts.. 3 Each
70 59 Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers including carriage of material within all leads and lifts. 1 Each
71 60 Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm including carriage of material within all leads and lifts. 1 Each
72 61 Providing and fixing CP brass bib tap with capastan head 15 mm dia. including carriage of material within all leads and lifts. 3 Each
73 62 Providing and fixing CP brass pillar tap with capstan head 15 mm dia including carriage of material within all leads and lifts. 1 Each
74 63 Providing and fixing CP stop cock 15mm dia including carriage of material within all leads and lifts. 4 Each
75 64 Providing and fixing CP connection pipe with brass unions 30 cms length 15mm nominal size including carriage of material within all leads and lifts. 5 Each
76 65.01 Providing and fixing brass full way valve with wheel including carriage of material within all leads and lifts. (1) 15mm nominal bore 2 Each
77 65.02 II) 20mm nominal bore 2 Each
78 66.01 Providing and fixing GI or MI union including carriage of material within all leads and lifts. (1)15mm nominal size 4 Each
79 66.02 II) 20mm Nominal size 3 Each
80 67 Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material within all leads and lifts.. 1 Each
81 68 Providing and fixing laboratory sink with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings Vitreous china 600mm x 450mm x 150mm complete including carriage of materials within all leads and lifts 1 Each
82 69 Providing and fixing PVC water storage tank double core 1000 ltr net capacity complete in all respect. Sintex make weight not less than 22 kg. including necessary fittings including carriage of material within all leads and lifts. 1 Each
83 70 Providing and fixing Zet connection complete in all respect 15 mm Dia including carriage of material within all leads and lifts. 1 Each
84 71 Providing and fixing plastic seat ( Solid/ Hollow type) and cover for wash down water closet with C.P brass hinges and rubber buffers including carriage of material within all leads and lifts. White plastic seat and cover. complete including carriage of materials within all leads and lifts 1 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail