}

Special Repair And Re-Routing Ht Lines/Ht Cables Incl Allied Services At Basoli Mil Station Under Ge Basoli, Basoli-Jammu And Kashmir

Military Engineer Services-MES has published Special Repair And Re-Routing Ht Lines/Ht Cables Incl Allied Services At Basoli Mil Station Under Ge Basoli. Submission Date for this Tender is 18-07-2020. HT Cable Tenders in Basoli Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

24865669
Special Repair And Re-Routing Ht Lines/Ht Cables Incl Allied Services At Basoli Mil Station Under Ge Basoli
Open Tender
Indian
Jammu And Kashmir
Basoli
18-07-2020

Tender Details

Special Repair And Re-Routing Ht Lines / Ht Cables Incl Allied Services At Basoli Mil Station Under Ge Basoli

Key Value

Document Fees
INR 500 /-
EMD
INR 40800.0 /-
Tender Value
INR 20.40 Lakhs /-

BOQ Items

Name of Work : SPECIAL REPAIR AND RE-ROUTING HT LINES/HT CABLES INCL ALLIED SERVICES AT BASOLI MIL STATION UNDER GE BASOLI
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5mtr in depth for foundation of pole and laying of UG cable and getting out in any type of soil complete all as specified and directed. 320 Cum
2 2 All as per Srl item no 1 here-in-before but exc 1.5 metre but n. exc 3.0 metre deep. 2.8 Cum
3 3 Returning filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25cm completed all as specified and directed. 205 Cum
4 4 Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5M above the starting point completed all as specified and directed. 115 Cum
5 5 M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm thick after laying and punned upto 18 cm, stretching and testing the cable as specified in clause 19.75 of SSR Part-1 68 Cum
6 6 M&L for unreinforced precast concrete cable cover class HV , type 1 flat , size 300mmx180mmx40mm covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning complete all as specified 2800 Each
7 7 M&L Sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed. 2800 Each
8 8 M&L for PCC ( 1:2:4) type B1 using 20mm graded crushed stone aggregate for coping pedestal of poles. Including necessary form work fair finished to exposed surface completed all as specified and directed. 0.8 Cum
9 9 M&L for PCC ( 1 : 3 : 6 ) type C2 using 40mm graded crushed stone aggreghate for foundation of poles and stay assembly completed all as specified and directed. 23 Cum
10 10 Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE, of cross sectional area 150 Sq mm X 3.5 core, PVC insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade complete all as specified and directed.\nNote :- (I) Earth work, sand cushioning and brick protection to cable shall be measured and paid separately . 30 RM
11 11 All as per Srl item no. 10 here-in-before but 120 Sq mm X 3.5 core 100 RM
12 12 All as per Srl item no. 10 here-in-before but 95 Sq mm X 3.5 core 110 RM
13 13 All as per Srl item no. 10 here-in-before but 50 Sq mm X 3.5 core 130 RM
14 14 M & L for fabrication of double door and outdoor type incorporated with busbar chamber having with aluminium busbar capacity 400 amps insulatted with RYB & black PVC insulated on tape suitable for 415 volts 3 phase 4 wire system 50 c/s fixed on SMC/DMC in step way complete with dust and vermin proof provisions made of CRCA MS sheet not less than 3.15 mm thick also having provision for incoming/outgoing COS/ cables, 02 Nos earth terminal point complete with 10mm dia bolt of suitable length, 02 nos nuts and 02 Nos Washers 3mm thick complete earth . The panel body must be painted with powder coated paint after the complete 7 tanks dip process to remove all impurties from the panel sheet, all the door must be fixed with detachable pin type hinges,steel door locking system, bus bar shall be through aluminium strip properly insulated fixed on SMC/DMC insulators. Panel body shall be fixed on iron angle frame of size 40x40x5mm, 40 cm grouted in PCC 1:2:4 type B 1 (using 20 mm graded crushed stone aggregate) and 40 cm above the ground level duly painted with two coat of synthetic enamel black paint over a coat of red oxide primer all as specified and directed. Following accessories shall be included in feedar pillar box :-\n(i) MCCB 4 pole 300 Amps, rupturing capacity 35 KA rating, 440 V , 3 phase -01 No (incoming)\n 1 Each Job
15 14.01 (ii) MCCB, TP 200 Amps, rupturing capacity 35 KA rating, 440 V , 3 phase -01 No.\n(iii) MCCB, TP 160 Amps, rupturing capacity 35 KA rating, 440 V , 3 phase -02No (Outgoing)\n(iv) MCCB, TP 100 Amps, rupturing capacity 25 KA rating, 440 V , 3 phase -01 No. (Outgoing)\n(v) MCCB, TP 63 Amps, rupturing capacity 25 KA rating, 440 V , 3 phase -01 No. (Outgoing)\n(vi) Multifunctional meter to measure the voltage, current,pf with all accessories -01 No.\n(vii) RYB LED indicator lamp-03 Nos
16 15 M & L for fabrication of double door and outdoor type incorporated with busbar chamber having with aluminium busbar capacity 400 amps insulatted with RYB & black PVC insulated on tape suitable for 415 volts 3 phase 4 wire system 50 c/s fixed on SMC/DMC in step way complete with dust and vermin proof provisions made of CRCA MS sheet not less than 3.15 mm thick also having provision for incoming/outgoing COS/ cables, 02 Nos earth terminal point complete with 10mm dia bolt of suitable length, 02 nos nuts and 02 Nos Washers 3mm thick complete earth . The panel body must be painted with powder coated paint after the complete 7 tanks dip process to remove all impurties from the panel sheet, all the door must be fixed with detachable pin type hinges,steel door locking system, bus bar shall be through aluminium strip properly insulated fixed on SMC/DMC insulators. Panel body shall be fixed on iron angle frame of size 40x40x5mm, 40 cm grouted in PCC 1:2:4 type B 1 (using 20 mm graded crushed stone aggregate) and 40 cm above the ground level duly painted with two coat of synthetic enamel black paint over a coat of red oxide primer all as specified and directed. Following accessories shall be included in feedar pillar box :-\n(i) MCCB 4 pole 125 Amps, rupturing capacity 25 KA rating, 440 V , 3 phase -01 No (incoming)\n 1 Each Job
17 15.01 (ii) MCCB, TP 63 Amps, rupturing capacity 25 KA rating, 440 V , 3 phase -03 No. (Outgoing)\n(iii) MCB, SPN 63 Amps, rupturing capacity 10 KA rating, 'C' series 240 V , 3 phase -01 No. (Outgoing)\n(vi) Multifunctional meter to measure the voltage, current,pf with all accessories -01 No.\n(vii) RYB LED indicator lamp-03 Nos
18 16 Supply, laying in trenches or passing through pipe/ducts, fixed to wall or poles XLPE insulated screened PVC sheathed galvanized steel strip or wire armoured electric power cable with aluminium stranded conductor of cross sectional area 120 Sqmm 3 core 11000 V rated suitable for earthed system including testing and commissioning all as specified and directed\n Note : (Excavation and earth work, sand cushioning brick covers and GI pipe etc shall be measured and paid separately. 610 RM
19 17 S&F DWC high density polyethelene pipes in replacement having 120/103 mm outer dia mm, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fittings as required at site including aking down the old unserviceable complete all as specified and directed. Make -Trupati /Equivalent 48 RM
20 18 Supply and fix cable end jointing kit for 11 KV grade (E) cable for outdoor type termination heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 to 185 Sqmm and testing complete all as specified and directed. 8 Each
21 19 S&F HT lightening arrestor metal oxide type (gap less) heavy duty single pole for 11 KV overhead line , suitable for 12 KV rated highest system voltage, long duration distribution discharge class type, IP 55 Degree of protection, 100(kVp) at 65 KA High current impulse withstand voltage and 9 KV Arrestor rating with normal discharge current of 10 KA complete with all fittings conforming to IS: 3070 part-3 effectively connected with earthing system complete all as specified and directed by Engr-in-Charge. Note:- Manufacturer's Test certificate for lighting arrestor shall be produced before claiming for payment. 4 Set of three
22 20 Supply , install, testing and commissioning of HT 11 KV Switch air break, gang operated, triple pole , mechanically operated, mounted on 15 Nos insulators and MS channel frame, with operating mechanism made out of 25 mm dia GI medium grade pipe suitable for operation from ground level with locking arrangement complete for current rating 200 Amps complete all as specified and directed by Engr-in-charge. 8 Each \nset
23 21 S&F in structural steel work conforming to grade Fe-410S as in cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections, including , nuts, bolts, washers, welding , bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat , one finishing coat of aluminium paint and epoxy coating, including taking down old corroded structural steel all as directed. 11.5 Qtl
24 22 Supply and fix disc type composite polymer insulators, specified mechanical load 45 KKN(min) P F (dry) withstand voltage 65 KV/mint, P F (wet) withstand voltage 40 KV/mint, impulse withstand voltage 80 KVP for tension with tension clamp for conductors working pressure 11000 volts complete all as specified and directed. 24 Each
25 23 Supply and fix pin type polymer insulator of size 190 mm length and 150 mm dia including galvanised mild steel strap, washer and one galvanised iron nut of suitable size for 11000 volts all as specified and directed. 40 Each
26 24 M&L for aluminium conductor steel re-inforced (ACSR) of any size for HT lines on PCC/Steel Tubular poles, stretching without kinks and bends, binding with (rates inclusive) binding wire complete all as specified and directed. 1 Qtl
27 25 M&L for galvanised steel wire 4 mm dia all as specified. 0.5 Qtl
28 26 S/F stay assembly complete comprising of 20mm dia 40cm long stay bow rod 20mm dia x 1.8 Mtr long galvanised stay rod threaded and with nuts including 300mmx300mmx6mm thick plate necessary clamps etc as shown on plate No. 1 on page 495 of SSR Part-I, 2009 complete all as specified and directed.\nNote : Loop type insulator, stay clamp, stay wire, excavation and concrete work measured separately). 10 Each\nJob
29 27 S & F galvanised steel stranded stay wire size 7/4mm for stay assembly complete all as specified and directed. 0.8 Qtl
30 28 S & F loop type insulator iwith complete fiting porcelain, vitreous white or brown large size with over all dismensions 90x140mm , clearance of hole 25.5mm complete all as specified and directed.. 10 Each\n
31 29 M&L for Anti climbing devices; comprising 2,24 mm dia galvanised steel 2-srand barbed wire wih 2.00mm dia barbs wrapped spirally round poles, to a lengh of 0.5 to 1.0 metre clammped and properly secured or as ordered (clamps measured separately) 0.15 Qtl
32 30 M&L for Anti-climbing device;spikes type fabricated out of M. S bars (round, square and flat) inclluding nuts, bolts, washers and welding in wo halves made to shape to suit the cross section of the pole. 0.7 Qtl
33 31 M&L for Danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letter,figures and conventional skull and bones in signal red colour and fix with MS clamps, bolts and nuts of approved size, for HT 25x20 cm , and as directed. 16 Each
34 32 S & F for Cradels, hexagonal/rectangular, fabricated and for streatching GI steel wire 4 mm dia including for pole to pole with binding wire in location/ area given by the incharge, and as directed. 0.15 Qtl
35 33 Supply and erection in vertical position Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws, type 410 SP-55 (11.0 metres long) all as specified duly factory painted with two coats of black bituminous paint internally through out and externaly for embeded portion and painting with one coat of red oxide primer, applying two coats of synthetic enamel aluminium paint on remaining exposed surfaces after errection complete, painting with synthetic enamel paint of colours black and yellow alternate strips of 30cm width upto 1.5 mtr from the top of coping complete including making suitable holes where required all as specified and directed .Note : PCC in foundation, coping, Earth work ( Excavation, Returning & refilling and removal) will be measured and paid separately under respective items of BOQ/ Sch 'A'. 16 Each
36 34 M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI strip of size 32 X 6 mm and 40 mm dia bore 7.5 mtr long light grade GI protection pipe for earth strip and GI watering pipe 40 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009. Note :- All joints either strip to strip of strip to earth plate are fixed with welded joints. 2 Each\nSet
37 35 M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI wire of size 4 mm dia and 15 mm dia bore 7.5 mtr long light grade GI protection pipe for earth strip and GI watering pipe 40 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009. 17 Each\nSet
38 36 Dismantling and taking down old existing ACSR conductor any type from existing HT/LT pole all as specified and directed by Engr-in-charge 0.4 Qtl
39 37 Dismantling of steel work ( brackets,clamps, channels including disc and pin insulators, nut & bolts) from existing pole all as specified and direc ted by Engr-in-Charge. 1.4 Qtl
40 38 Dismantling insulators any type, any size and depositing to the MES store yard complete all as specified and directed. 27 Each
41 39 Dismantling of earth wire/ stay wire all as specified and directed by Engr-in-charge. 0.25 Qtl
42 40 Taking down existing HT/LT pole 11 mtr long PCC/steel including earth work and PCC of the poles all as specified and directed by Engr-in-charge 5 Each\nJob
43 41 Taking out existing OH/UG/AB cable any type any size including earth work and taking out of bricks and stagging in safe manners for reuse in work where required all as specified and directed by Engr-in-charge 650 RM
44 42 Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail