Jammu And Kashmir Housing Board has published Balance Work For Construction Of Night Shelter For Homeless At Reasi. Submission Date for this Tender is 20-07-2020. Civil Work Tenders in Reasi JK Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Name of Work: Balance work for Construction of Night Shelter for Homeless at Reasi | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earthwork in all kinds of soil excavation by manual means in trenches for foundations, drains, pipes, cable etc. (not exceeding 1.5 in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 Mtr from cutting edge, disposed earth is to be leveled and neatly dressed | BI01010001010000000000000515BI0100001113 | 39.25 | Cum |
2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate) 40mm nominal size crushed. | 11.48 | Cum | |
3 | 3 | Providing and laying Cement Concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded brick aggregate 40 mm nominal size) excluding cost of centering and shuttering , all work upto floor V level | 23.78 | Cum | |
4 | 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size). | 13.5 | Cum | |
5 | 5 | Providing and laying in position cement concrete of 1:3:6 grade (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. All work upto plinth level. | 74.94 | Cum | |
6 | 6 | Centering and shuttering including strutting, propping etc. and removal of form work for :- | |||
7 | 6.1 | Foundations, footings, bases of columns. | 244.44 | Sqm | |
8 | 6.2 | Suspended floors, roofs, landings, balconies and access platforms | 370.97 | Sqm | |
9 | 6.3 | Columns, pillars, piers, abutments, posts and struts. | 56.2 | Sqm | |
10 | 6.4 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. | 253.78 | Sqm | |
11 | 6.5 | Edges of slabs and breaks in floors and walls upto 20cm wide | 100.2 | Rmt | |
12 | 7 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars. | 8000 | Kgs | |
13 | 8 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in super structure in cement mortar 1:6 (1 cement : 6 fine sand). | 94.72 | Cum | |
14 | 9 | Half brick masonry with bricks of class designation 75 in foundation, plinth and superstructure upto floor V-level in cement mortar 1:4 (1 cement : 4 coarse sand). | 340.24 | Sqm | |
15 | 10 | Providing and laying Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) in suspended floors, balconies, landings and staircases having 15 degree slope. upto floor five level excluding the cost of centering and shuttering. | 72.5 | Cum | |
16 | 11 | 15mm cement plaster on the rough side of single or half brick wall of mix in 1:6 (1 cement : 6 fine sand). | 1863.02 | Sqm | |
17 | 12 | 12mm cement plaster of mix 1:4 (1 cement : 4 fine sand). | 401.94 | Sqm | |
18 | 13 | Providing and laying of cement concrete flooring in 1;2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry complete. 50 mm thick using 20 mm nominal size crushed stone aggregates | 497.48 | Sqm | |
19 | 14 | Providing and laying 18mm thick Granite of any colour and shape (area of slab upto 0.5 Sqm) gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. | 90 | Sqm | |
20 | 15 | Providing and laying glossy finished full-body vitrified premium quality floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc. complete (size of tile 60x60cm). | 122.1 | Sqm | |
21 | 16 | Providing and fixing Ist quality ceramic glazed tiles of size 300mm x 600mm conforming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineer in charge in skirting, risers of steps and dodos over 12mm thick bed of cement mortar 1:3 (1cement : 3coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | 306.9 | Sqm | |
22 | 17 | Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc. consisting of (a) applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining was upto 300mm height including rounding of junction of walls and slaps. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20mm thick joint less cement mortar of mix 1: 4 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm / sq 3mm deep. (e) The whole terrace so finished shall be flooded with water far a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurras as 65mm. | 327.2 | Sqm | |
23 | 18 | Providing and laying water proofing treatment to vertical and horizontal surface of depressed portions of W.C., kitchen and the consisting of (i) Ist course of applying cement slurry @ 4.4 kg /sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding of junctions of vertical and horizontal surface. (ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportions including rounding of junctions of vertical and horizontal surface. (iii) III course of applying blown or / residual bitumen applied hot at 1.7 kg per sqm of area. (iv) Ivth course of 400 micron thick PVC sheet (Overlaps at joints of PVC sheet should be 100mm wide and pasted to each other with bitumen @ 1.7 kg/sqm. | 135.48 | Sqm | |
24 | 19 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminium (minimum thckness of powder coated 50 microns) | 1140 | Kgs | |
25 | 20 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminium (minimum thckness of powder coated 50 microns) | 1760 | Kgs | |
26 | 21 | Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative\nlamination on both sides | 26.5 | Sqm | |
27 | 22 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.50 mm thickness\n(weight not less than 13.50 kg/ sqm) | 76.8 | Sqm | |
28 | 23 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo em,possed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot" and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25\nmm thickness | 4 | each | |
29 | 24 | Providmg and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer,(having superior brand) embossed on the body, door weight upto 36-80 kg and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc.complete : | 22 | No | |
30 | 25 | Providing and fixing aluminum tower bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 150x10mm | 160 | each | |
31 | 25.2 | 250x10mm | 85 | each | |
32 | 26 | Providing and fixing aluminum handles ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. | |||
33 | 26.1 | 125mm | 40 | each | |
34 | 26.2 | 100mm. | 118 | each | |
35 | 27 | Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. | 1713.69 | Sqm | |
36 | 28 | Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface | 1014.62 | Sqm | |
37 | 29 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coat on new work. | 1014.62 | Sqm | |
38 | 30 | Finishing walls with textured exterior paint of required shade on new work (two or more coats applied @ 3.28 ltr/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm). | 699.07 | Sqm | |
39 | 31 | Providing and fixing of 12mm thick GRC wall Cladding (Tiles) of pattern stone castle (size 4” x 10”) on exterior wall / surface. Unistone make as per the approved sample. All complete as per architectural drawings and the directions of Engineer-in-Charge. | 1699.54 | Sft | |
40 | 32 | Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete. | |||
41 | 33 | Sand | 185.39 | Cum | |
42 | 34 | Stone aggregate upto 40 mm | 173.98 | Cum | |
43 | 35 | Bricks | 78957 | no |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail