Department Of Technical Education has published Supply Of Equipment For I . C . Engine/Auto Mobile Lab. Submission Date for this Tender is 11-08-2020. Tanks and Cylinders Tenders in Directorate of Technical Education Jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work: 6. I.C. EngineAuto Mobile Lab | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description Full Specification as per Annexure “H” | Item Code / Make | Quantity | Units | |
| 1 | 1 | Cut Sectional Working clutch system with pressure plates of old CAR/JEEP\nFull Specification as per Annexure “H” | item1 | 1 | Nos |
| 2 | 2 | Cut Sectional Working gear box with differential of old Maruti 800 \nFull Specification as per Annexure “H” | item2 | 1 | Nos |
| 3 | 3 | Cut sectional model of actual gear box system Sliding mesh \nFull Specification as per Annexure “H” | item3 | 1 | Nos |
| 4 | 4 | Cut sectional model of actual gear box system Constant Mesh\nFull Specification as per Annexure “H” | item4 | 1 | Nos |
| 5 | 5 | Cut sectional model of actual gear box system Synchro Mesh \nFull Specification as per Annexure “H” | item5 | 1 | Nos |
| 6 | 6 | Propeller shaft wit universal joint of old LMV\nFull Specification as per Annexure “H” | item6 | 1 | Nos |
| 7 | 7 | Working differential system with live axle, back plate and drum of old Jeep / LMV (cut sectional)\nFull Specification as per Annexure “H” | item7 | 1 | Nos |
| 8 | 8 | Cut Sectional Working steering system of rack and pinion types of old LMV\nFull Specification as per Annexure “H” | item8 | 1 | Nos |
| 9 | 9 | Cut Sectional Working steering system Worm and Worm wheel type \nFull Specification as per Annexure “H” | item9 | 1 | Nos |
| 10 | 10 | Working braking system with stub axle\nFull Specification as per Annexure “H” | item10 | 1 | Nos |
| 11 | 11 | Cut section model of mechanical braking system\nFull Specification as per Annexure “H” | item11 | 1 | Nos |
| 12 | 12 | Working ignition system of 4 cylinder engine with switch, coil\nFull Specification as per Annexure “H” | item12 | 1 | Nos |
| 13 | 13 | Cut sectional working system of petrol engine \nFull Specification as per Annexure “H” | item13 | 1 | Nos |
| 14 | 14 | Double ended spanner set 6mm to30mm \nFull Specification as per Annexure “H” | item14 | 1 | Nos |
| 15 | 15 | Ring spanner set 6mm to 30mm \nFull Specification as per Annexure “H” | item15 | 1 | Nos |
| 16 | 16 | Box spanner set 6mm to 30mm \nFull Specification as per Annexure “H” | item16 | 2 | Nos |
| 17 | 17 | Working model of fuel supply system of diesel engine \nFull Specification as per Annexure “H” | item17 | 1 | Nos |
| 18 | 18 | Bore gauge for measuring cylinder bore\nFull Specification as per Annexure “H” | item18 | 4 | Nos |
| 19 | 19 | Inside vernier caliper\nFull Specification as per Annexure “H” | item19 | 1 | Nos |
| 20 | 20 | Cut section model of front actual suspension system of car\nFull Specification as per Annexure “H” | item20 | 1 | Nos |
| 21 | 21 | Cut section model of rear actual suspension system of car\nFull Specification as per Annexure “H” | item21 | 1 | Nos |
| 22 | 22 | Cut section model of front actual suspension system of truck\nFull Specification as per Annexure “H” | item22 | 1 | Nos |
| 23 | 23 | Cut section model of rear actual suspension system of truck\nFull Specification as per Annexure “H” | item23 | 1 | Nos |
| 24 | 24 | Cut section power steering system\nFull Specification as per Annexure “H” | item24 | 1 | Nos |
| 25 | 25 | I.C. Engien\nFull Specification as per Annexure “H” | item25 | 1 | Nos |
| 26 | 26 | Illustrative, detailed, cut section, working models driven \nFull Specification as per Annexure “H” | item26 | 2 | Nos |
| 27 | 27 | Illustrative, detailed, cut section, working models driven \nFull Specification as per Annexure “H” | item27 | 2 | Nos |
| 28 | 28 | Illustrative detailed, cut section models of actual components (mounted on steel base)- Zenith carburetor\nFull Specification as per Annexure “H” | item28 | 2 | Nos |
| 29 | 29 | Illustrative detailed, cut section models of actual components (mounted on steel base)- S.U. carburetor\nFull Specification as per Annexure “H” | item29 | 2 | Nos |
| 30 | 30 | Illustrative detailed, cut section models of actual components (mounted on steel base)- Solex carburetor\nFull Specification as per Annexure “H” | item30 | 1 | Nos |
| 31 | 31 | Multi cylinder four stroke petrol engine Test rig.\nFull Specification as per Annexure “H” | item31 | 1 | Nos |
| 32 | 32 | Single cylinder diesel engine Test rig\nFull Specification as per Annexure “H” | item32 | 1 | Nos |
| 33 | 33 | Air Compressor Performance Test rig.\nFull Specification as per Annexure “H” | item33 | 1 | Nos |
| 34 | 34 | Illustrative detailed cut section Working Model of Fuel \nFull Specification as per Annexure “H” | item34 | 2 | Nos |
| 35 | 35 | TECHOMETER DIGITAL\nFull Specification as per Annexure “H” | item35 | 2 | Nos |
| 36 | 36 | Cut section of Actual MPFI System of Four Wheeler\nFull Specification as per Annexure “H” | item36 | 3 | Nos |
| 37 | 37 | Actual electrical feed pump\nFull Specification as per Annexure “H” | item37 | 1 | Nos |
| 38 | 38 | Actual Mechanical feed pump\nFull Specification as per Annexure “H” | item38 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
