}

Package-113-Road Furniture Providing Road Furniture To The Government Roads In Ariyalur-H- C And M Division For 2020-2021 -Package 113, Ariyalur-Tamil Nadu

Highways Department-HD has published Package-113-Road Furniture Providing Road Furniture To The Government Roads In Ariyalur-H- C And M Division For 2020-2021 -Package 113. Submission Date for this Tender is 05-08-2020. Road furniture Tenders in Ariyalur Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

24860320
Package-113-Road Furniture Providing Road Furniture To The Government Roads In Ariyalur-H- C And M Division For 2020-2021 -Package 113
Open Tender
Indian
Tamil Nadu
Ariyalur
05-08-2020

Tender Details

Package-113-Road Furniture Providing Road Furniture To The Government Roads In Ariyalur-H- C And M Division For 2020-2021 -Package 113

Key Value

Document Fees
Refer document
EMD
INR 75000.0 /-
Tender Value
INR 1.21 Crore /-

BOQ Items

Providing Road Furniture to the Government roads in Ariyalur (H) C&M Division for 2020-2021 (Package 113) A - Ariyalur (H) CM Subdivision B - Jayankondam (H) C&M Sub-Division C - Sendurai (H) C&M Sub-Division
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Providing and erecting of retro-reflectorised Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic grade sheeting confirming to Type IV standards of IRC: 67-2012 and ASTMD 4956-09, specification and fixed over 2.00mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle post 75mm x 75mm x 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC: 67-2012 and family fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm size including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High Intensity retro reflectro sheet shall consist of minimum coefficient of Retro reflection as per Table 6.6 of IRC 67-2012.The retro refective sheeting shall be covered under seven year warrenty issued for field perfomance and a certified copy of three years out door exposer report shall be obtained as per IRC 67-2012 as per MoRT&H Specification No:801 (80 cm X 60 cm Rectangular ) s1
2 1.1 Ariyaur (H) CM Subdivision s2 99 Number
3 2 Providing and erecting of retro-reflectorised Cautionary, Mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic grade sheeting confirming Type IV standards of IRC: 67-2012 and ASTMD 4956-09, specification and fixed over 2.00mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle post 75mm x 75mm x 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC: 67-2012 and family fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm size including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High Intensity retro reflectro sheet shall consist of minimum coefficient of Retro reflection as per Table 6.6 of IRC 67-2012.The retro refective sheeting shall be covered under seven year warrenty issued for field perfomance and a certified copy of three years out door exposer report shall be obtained as per IRC 67-2012 as per MoRT&H Specification No:801 60 cm circular 90 cm equilateral triangle s3
4 2.1 Ariyaur (H) CM Subdivision s4 276 Number
5 2.2 Sendurai (H) CM Subdivision s5 380 Number
6 3 Providing and erecting of Direction and Place Identification retro-reflectorised signs made out of High Intensity Prismatic grade sheeting confirming to Type IV standards of IRC: 67-2012 and ASTMD 4956-09, specification and fixed over 2.00mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle post 75mm x 75mm x 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC: 67-2012 and family fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm size including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Rectro - Refletor sheet shall consist mimimum coefficient of Retro reflection as per Table 6.9 of IRC 67-2012.The retro refective sheeting shall be covered under seven year warrenty issued for field perfomance and a certified copy of three years out door exposer report shall be obtained as per IRC 67-2012 as per MoRT&H Specification No:801 (for sign having area upto 0.9 sqm) s6
7 3.1 Ariyaur (H) CM Subdivision s7 105.3 square metre
8 4 Providing and fixing reflective road studs of 'category A' Raised pavement markers made out of poly corbonate / methecrylate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RW / NH. 33023/10/ 97-Do.III dt 11.06.97. The height, width and length shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflective area 13 Sq.cm on each side and the slope to the base shall be 35 +/- 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the eningineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC 35 - 2015 guidelines and MORT&H specification 804 etc., complete. s8
9 4.1 Ariyalur (H) C&M Subdivision s9 1652 Number
10 4.2 Jayankondam (H) C&M Subdivision s10 1513 Number
11 5 Supplying and installation of delineators (road way indicators,hazard markers and object markers) 80-100 cm high above ground level,painted at alternatively black and white in 15 cm wide strips,fitted with 80 x 100mm rectangular or 75mm dia circular reflectorised panels at the top,buried or pressed into the ground and confirming to IRC-9 etc., complete (as per MoRT&H Specification No:806) s11
12 5.1 Ariyaur (H) C&M Subdivision s12 443 Number
13 5.2 Jayankondam (H) C&M Subdivision s13 225 Number
14 5.3 Sendurai (H) C&M Subdivision s14 789 Number
15 6 Providing and erecting of retro-reflectorised Hazard marker traffic sign made out of high intensity Prismatic grade sheeting confirming to Type IV standards of IRC: 67-2012 and ASTMD 4956-09, specification and fixed over 2.00mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle post 75mm x 75mm x 6mm below ground level. The sign post should be painted as per IRC: 67-2012 and family fixied to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm size including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High intensity Retro reflectro sheet shall consist of minimum coefficient of Retro reflection as per Table 6.6 of IRC 67-2012.The retro refective sheeting shall be covered under seven year warrenty issued for field perfomance and a certified copy of three years out door exposer report shall be obtained as per IRC 67-2012 as per MoRT&H Specification No:801 (30cm x 90 cm Rectangular) s15
16 6.1 Jayankondam (H) CM Subdivision s16 28 Number
17 6.2 Sendura (H) CM Subdivision s17 12 Number
18 7 Providing and erecting of Direction and Place Identification retro-reflectorised signs made out of High Intensity Prismatic grade sheeting confirming to Type IV standards of IRC: 67-2012 and ASTMD 4956-09, specification and fixed over 2.00mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle post 75mm x 75mm x 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC: 67-2012 and family fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm size including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Rectro - Refletor sheet shall consist mimimum coefficient of Retro reflection as per Table 6.9 of IRC 67-2012.The retro refective sheeting shall be covered under seven year warrenty issued for field perfomance and a certified copy of three years out door exposer report shall be obtained as per IRC 67-2012 as per MoRT&H Specification No:801 (for sign having area more than 0.9 sqm) s18
19 7.1 Jayankondam (H) CM Subdivision s19 75.6 square metre
20 7.2 Sendurai (H) CM Subdivision s20 90.72 square metre
21 8 Providing and erecting of retro-reflectorised Cautionary, Mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic grade sheeting confirming Type IV standards of IRC: 67-2012 and ASTMD 4956-09, specification and fixed over 2.00mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle post 75mm x 75mm x 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC: 67-2012 and family fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm size including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High Intensity retro reflectro sheet shall consist of minimum coefficient of Retro reflection as per Table 6.6 of IRC 67-2012.The retro refective sheeting shall be covered under seven year warrenty issued for field perfomance and a certified copy of three years out door exposer report shall be obtained as per IRC 67-2012 as per MoRT&H Specification No:801 60 cm circular (60 cm x 45 cm rectangular) s21
22 8.1 Jayankondam (H) C&M Subdivision s22 95 Number
23 9 Providing and erecting of retro-reflectorised Cautionary, Mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic grade sheeting confirming Type IV standards of IRC: 67-2012 and ASTMD 4956-09, specification and fixed over 2.00mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle post 75mm x 75mm x 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC: 67-2012 and family fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm size including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High Intensity retro reflectro sheet shall consist of minimum coefficient of Retro reflection as per Table 6.6 of IRC 67-2012.The retro refective sheeting shall be covered under seven year warrenty issued for field perfomance and a certified copy of three years out door exposer report shall be obtained as per IRC 67-2012 as per MoRT&H Specification No:801 60 cm circular (80 cm X 60 cm Rectangular ) s23
24 9.1 Jayankondam (H) C&M Subdivision s24 16 Number
25 10 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 2.5 gms per squm area, thickness of the 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level, uniform and free from streaks and holes etc., complete as per MORT & H specification No : 803 s25
26 10.1 Jayankondam (H) C&M Subdivision s26 67 square metre
27 10.2 Calculation of SubTotal, GST and Total Amount carried out by system automatically
28 10.3 Basic cost of value put to tender as per estimate 1 (A)
29 10.4 Add GST at 12% 1 (B)
30 10.5 Total Value put to Tender 1 (A+B)
31 10.6 Negotiated Percentage 1 (D)
32 10.7 Final Negotiated Value 1 (E)
33 10.8 Add GST at 12% of Final Negotiated Value 1 (F)
34 10.9 Total Value of Contract Including 12% of GST 1 (E+F)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail