Rate Contract For Design Fabrication Supply Installation Testing And Commissioning Of Pantoon Type Barge, Sanat ghar Bemina-Jammu And Kashmir

Rate Contract For Design Fabrication Supply Installation Testing And Commissioning Of Pantoon Type Barge , Pantoons Pantoons Shall Be Fabricated Out Of 5Mm Thick M . S Plate Rolled Into Perfect Circular Shape . The Pipe Ferrules Shall Be Welded With Circular Ends And Buffer Plates In The Centre After Every 2 . 5 Mtrs . The Pantoons Shall Be In Two Rows , Each Row Shall Have Three Number Of Pantoons , Each Row Shall Be Provided With 2 Number Nose Pantoons To Give The Barge Easy Movement During Operation . The Pantoons Shall Be Connected With Each Other By Connecting Angle Hooks Duly Drilled To Accommodate Nuts And Bolts Of Size 18Mm Thickness . The Number Of Holes On Each Angle Hook Shall Be Three Numbers . The Angle Iron Hooks Shall Be Welded With The Base Plate Fitted And Welded On The Pantoon On Both Outside And Inner Side Of The Pantoon . The Pantoons Shall Be Connected With Each Other At Site In Perfect Alignment With Providing And Fitting Of Nuts And Bolts . , Base Plate The Base Plate Shall Be Provided And Welded On The Top Side Of The Pantoon . The Size Of The Base Plate Shall Be 75Mm X 350Mm X 6Mm . The Other Plate Of Size 350Mm*125Mm*8Mm Shall Be Duly Drilled Three Number Holes Of Size 18Mm Dia And Welding The Same On The Base Plate For Holding The Channel Section Of Size 75Mm*37Mm . Providing , Fitting And Welding Of Two Number Cleats Of Size 75Mm*75Mm*8Mm With The Base Plate At One Side And Other Side With The Channel Holding Plate . , Plug Arrangement Each Pantoon Shall Be Provided And Welded With The 50Mm Dia Socket With Plug Arrangements To Every Compartment Of Pantoon . , Toeing Arrangement The Pantoon Shall Have Two Number Bollard Hooks Welded At The Nose Of The Pantoon For Toeing Arrangement During Operation . , Tie Beam Tie Beam Shall Be Fabricated Out Of 75Mm X 40 Mm Channel Section . The Channel Shall Be Drilled Three Number Of Holes At One End In Between The Centre Of 1100 Mm And Drilling The Same On The Other End . Each Channel Shall Be Welded With Channel Section Of Size 300Mm Length 75Mm X 40Mm Vertically On Both Sides At An Angle Of 90 Degree . The Channel Shall Be Fitted With The M . S Plate Duly Drilled And Welded On The Top Of The Pantoon The Job Includes Providing And Fitting Of Nuts And Bolts . , Super Structure The Super Structure Of Barge Shall Be Fabricated Out Of 5Mm Thick M . S Plate . The Base Of The Barge Shall Be 5 Mm Thick . The Sides Of The Barge Shall Be 300Mm X 5Mm Fitted Vertically With The Channel Section And 400Mm In Width To Be Welded Inclined With The Base Plate At One End And With The Channel Section On The Other End . The Welding Shall Be Flawless And Continuous . The Base Plate Shall Be Jointed With Each Other After Making A Gap Of 5Mm Of Size 150Mm After Every 450Mm To Allow The Water To Flow . Two Number Capstans Shall Be Installed At The Top Of The Structure Of Barge To Hold The Rope For Guiding The Barge During Operation .

INR 25 /-

INR 5000.0 /-

Refer document