Miscellaneous Goods ( Aios Maint ) Supply Of Miscellaneous Goods ( Aios Maint ), JWG/KERI-Jammu And Kashmir

Miscellaneous Goods ( Aios Maint ) Supply Of Miscellaneous Goods ( Aios Maint ) , Provision Of Miscellaneous Goods ( Aios Maint ) As Per Items Ser No 1 . 01 To 1 . 24 For Jaranwali Gali/Keri ( Quantity May Vary At The Time Of Placement Of Supply Order ) . , Laip A Type ( Y Shaped ) ( 75 X 75 X 6Mm ) 4 . 215 M Long Minimum Weight 28 . 662 Kgs With Tolerance + 5% And -2% Having Notches 18 Nos Steel To Be Conforming To Is 2062 . Make : Sail/Tata/Jindal . , Laip B Type ( 65 X 65 X 6Mm ) 2 . 55 M Long Minimum Weight 14 . 79 Kgs With Tolerance + 5% And -2% Having Notches 11 Nos Steel To Be Conforming To Is 2062 . Make : Sail/Tata/Jindal . , Laip C Type ( 65 X 65 X 6Mm ) 2 . 55 M Long Minimum Weight 13 . 05 Kgs With Tolerance + 5% And -2% Having Notches 09 Nos Steel To Be Conforming To Is 2062 . Make : Sail/Tata/Jindal . , Laip D Type ( 65 X 65 X 6Mm ) 1 . 35 M Long Minimum Weight 7 . 83 Kgs With Tolerance + 5% And -2% Having Notches 02 Nos Steel To Be Conforming To Is 2062 . Make : Sail/Tata/Jindal . , Tor Panel Of Size 3 . 00X1 . 25M Made Up Of 10 Mm Dia @ 150 C/C , Horizontal Bar 10 Mm Dia Tmt Bar 7 Nos And Vertical Bar 10 Mm Dia Tmt Bar 19 Nos Tor Steel Confirming To Is 1772-1971 Weight Of Tor Panel Should Be 28 . 5 Kg + 5% And All Adjacent Members To Welded As Per Specifications And Drawing Att Including One Coat Of Red Oxide Primer & One Coat Of Red Paint Alongwith Following Accessories:- ( I ) Clamps Consisting Of Two Nos Ms Plate Of Size ( Lxbxt ) 140X30x4 Mm With Three Nos Of Holes No -2 ( Ii ) Three Nos 10X100mm Full Threaded Nut And Bolt . Both The Extreme Bolts To Be Welded For More Suitability . Make Tata/Sail/Jindal . , Hdpe Sand Bags ( Uv Proofed ) Barrel Type Double Stitched At One End Std Quality Double Colour Brown And Size 840 Mm X 360 Mm Nylon With Suitable Tying Cord As Per Is 14252/1995 . Weight Should Not Less Than 85 Gms As Per Sample Approved By This Regiment . , U Clip Made Of Ms Bar Of Size 8 Mm Dia 200 Mm Length And 100 Mm Wide , Panjis 5 Prong With V Notch Made Of 8Mm Dia Ms Bar , Total Weight Of 6 Kg + 2% , Cgi Sheet 10 X 3 & Thickness 0 . 63Mm 120 Gsm ( Isi Marked ) Make . Tata/Sail , Cgi Sheet 12 X 3 & Thickness 0 . 63Mm 120 Gsm ( Isi Marked ) Make . Tata/Sail , Punch Tape Low Carbon Steel Strip Of 19Mm Wide 0 . 5Mm Thick Having Strip Of Sharp Barbs , Punched All Along The Length . The Punched Tap And Core Wire Are Electro Galvanized To Provide Protection From Outdoor Exposure . The Punched Tape Will Be Coiled In A Spool Of 50 Mtr Length Having Weight Of 2 . 66 Kg With Tolerance Ordnance Pattern Type . As Per Specification No Cqae/5660/1515/2001/284 Nos & Drg No Imca 0113/4 , Imsa 0289/A , Impd - 1919 And Impd 820 . 04 Strands Of Punched Tape Low Corbon Steel Strip Shall Be Provided On Each Side At Regular Interval , Barbed Wire 2 . 24Mm Dia Minimum Length Of 450M In 50 Kg Of Roll . Galvanized Barbed Wire Shall Be Of 2 Strands Conforming To Is 278- 1978 . It Shall Consist Of 2 Line Wires Of 2 . 24Mm Dia With Dia Of Barbs 2 Mm At 75 Mm Centre To Centre . The Barbs Shall Have A Length Not Less Than 13Mm And Not More Than 18 Mm With Sharp Pointed Edges . The Line And Point Wires Shall Be Circular In Section . Free From Scales And Other Defects And Shall Be Uniformly Galvanized . The Line Wire Shall Not Contain Any Welds And Should Be Continuous . , Punched Tape Concertina Coil: 1050Mm Dia Punched Type Concertina Coil ( Incl Spike And Handle ) With A Spiral Of 50 Turns Having A 2 . 6Mm Dia Core Wire Of High Carbon Spring Steel Of High Tensile Strength Having Series Of Sharp Bards Punched All Long The Length On Both The Side Of Strips At Regular Interval . The Punched Tape And The Core Wire Formed Into A Coil Are Electrogalvanised To Provide Protection Against Outdoor Exposure . The Punched Tape Is Mechanically Crimped Over The Cover Wire And Then Formed Into A Coil At Various Parts Of The Periphery Of The Coil , The Individual Turns Of The Coil Are Connected To Each Other By Steel Clips , So That It Can Be Opened Up Like An Accordion . The Width Of Barbed As 9Mm And Spacing Of Clips 23 . 5Mm To 24 . 5Mm C/C . Two Handles And One Spike Will Be Provided At Each Side Of The Spiral To Facilitate Ease Of Handling And Anchoring Of The Coil To Ground . The Length Of The Coil When Opened Up Will Be 15M With An Effective Height Of 915Mm . The Punched Tape Concertina Coil Consist Of Various Components Like Punched Tape , Spring Steel , Coil Wire . Clip Handle And Spike . The Punched Tape Concertina Coil Including Handle And Spike , Weight Approximately 15 . 2 Kg ( +/- ) 5% Tolerance Per Coil . Coil Will Be Wound With Bituminized Hessian Cloth To Provide Protective Packing And Ord Pattern As Per Specification No Ind/Eng/ Prov/ 1245/B ( Except Clause 11 & 12 ) For Raw Material And Drawings Imga 0112/B ( Sheet 1&2 ) , Imga 0112/C ( Sheet 2 Of 2 ) , Impd 1817/B , Impd- 1821/B And Impd 1822/B . , Gi Binding Wire 0 . 90Mm Dia Confirming To Is 2062/1991 , Baby Coil : Punched Tape Concertina Coil ( Excluding Spike And Handle ) In 610 Mm Dia With 50 Turns Having 2 . 60 Mm Dia Of High Carbon Spring Steel High Tensile Core Wire As Per Is-4454 ( Part-I ) . The Punched Tape 0 . 5 Mm Thick And 19 . 0 Mm Wide As Per Specification Is-513 ( Dd Grade ) Is Mechanically Crimped Over Core Wire And Then Formed Into A Cell . At Various Part Of The Periphery Of The Coil The Individual Turns Of The Coil Are Connected To Each Other With 5 Steel Clips ( Total 129 Nos Per Coil ) Equally Spaced So That It Opens Up Like An Accordion . The Weight Of Each Coil Will Be 9 . 5 Kgs ( +/- 5% ) Without Packing Material . The Coil When Opened Up To 7 . 50 Meters Length The Effective Height Of Coil Will Be 590 Mm . Each Coil Wound With Bituminized Hessian Cloth For Providing Protective Coating As Per Specifications No . Cqae/5600/1602/A For Raw Material And Drawings Imga-0112/B ( Sheet 1 Of 2 ) , Imga-0112/C ( Sheet 2 Of 2 ) . Impd-1817/B , Impd-1820 , Impd-1821/B And Impd-1822/B . , Steel Roofing Trough ( Srt ) : Isi Marked 1830 Mm Long Made Out Of 2Mm Thick @ 27 Kg Each With Tolerance - 2% To 5% Hot Rolled Carbon Steel Sheet Confirming To Is Specification With 16 Nos 12 Mm Dia Long Bolt Machine Made , Steel Roofing Trough ( Srt ) : Steel Roofing Trough Isi Marked 3050Mm Long Made Out Of 2Mm Thick @ 47 . 89 Kg Each With Tolerance 2% To +5% Hot Rolled Carbon Steel Sheet Confirming To Is Specification With 16 Nos 12 Mm Dia 25 Mm Long Bolt . , Steel Cage Of Size 900X600x750mm Made Out Of 8 Mm Tmt Bars Welded Together @ 150 Mm Cc In Each Panels ( 04 Side Walls ) , Panels Inter Connected With 10Mm Tmt Bar Rig 05 Nos For Each Corner , Four Clamps At Corners On Top With Nut Bolt Arrangements , Defoliant Solution ( 1 Ltrs Pkg ) , Gloves Gauntlet Protective Leather Double Layer On Finger As Per Is Specification , Pliers Side Cutting 200Mm Long , Portable , Collapsible Protective Wall Basket Hesco/Star Gabion Galvanized Welded Mesh Frame ( 2 Cell Per Set ) If Size 0 . 61X 0 . 75 X 1 . 22M Length 4 Feet , Width 2 Feet And Height 2 . 5 Feet ) . Gabion Mesh Will Be Made Of 4Mm Dia Hot Dip Galvanized Low Carbon Steel Wire Conform To Bs 1052 . 145 Gsm Alu-Zink Coated Prime Quality Raw Material Conforming To Bs/En 10244-2 . Wire Tensile 540-770N/Mn2 . 100% Defect Free . Gabion Frame Mesh Size Is 76 . 5Mmx76 . 5Mm . Mesh Tensile 70% Of Wire Tensile , Mesh Frame Edge Will Be Spiral Hinged Through 20Mm Dia Spiral Made Of 4Mm Dia Galvanized Stretchable Wire For Joining To Ensure Easy Folding And Unfolding And 2 In Length After Folding , Steel Roofing Trough ( Srt ) : Steel Roofing Trough Isi Marked 2400Mm Long Made Out Of 2Mm Thick @ 35Kg Each With Tolerance 2% To +5% Hot Rolled Carbon Steel Sheet Confirming To Is Specification With 16 Nos 12 Mm Dia 25 Mm Long Bolt , Steel Roofing Trough ( Srt ) : Isi

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	21-Jul-2020	AMDT DATE	Date	05-08-2020

Refer document

INR 80000.0 /-

Refer document

Name of Work: PROVISION OF MISCELLANEOUS GOODS (AIOS MAINT) (JOB-6835)
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Provision of Miscellaneous Goods (AIOS MAINT) as per items Ser No 1.01 to 1.24 for Jaranwali Gali/keri (Quantity may vary at the time of placement of supply order).
2	1.01	LAIP 'A' type (Y Shaped) (75 x 75 x 6mm) 4.215 m Long minimum weight 28.662 kgs with tolerance + 5% and -2% having notches 18 Nos Steel to be conforming to IS 2062. Make : SAIL/TATA/JINDAL.	item1	43	Nos
3	1.02	LAIP 'B' type (65 x 65 x 6mm) 2.55 m Long minimum weight 14.79 kgs with tolerance + 5% and -2% having notches 11 Nos Steel to be conforming to IS 2062. Make : SAIL/TATA/JINDAL.	item2	100	Nos
4	1.03	LAIP 'C' type (65 x 65 x 6mm) 2.55 m Long minimum weight 13.05 kgs with tolerance + 5% and -2% having notches 09 Nos Steel to be conforming to IS 2062. Make : SAIL/TATA/JINDAL.	item3	125	Nos
5	1.04	LAIP 'D' type (65 x 65 x 6mm) 1.35 m Long minimum weight 7.83 kgs with tolerance + 5% and -2% having notches 02 Nos Steel to be conforming to IS 2062. Make : SAIL/TATA/JINDAL.	item4	90	Nos
6	1.05	TOR Panel of size 3.00x1.25m made up of 10 mm dia @ 150 C/C, horizontal bar 10 mm dia TMT bar 7 Nos and vertical bar 10 mm dia Tmt bar 19 Nos TOR steel confirming to IS 1772-1971 weight of TOR panel should be 28.5 Kg + 5% and all adjacent members to welded as per specifications and drawing att Including one coat of red oxide primer & one coat of red paint alongwith following accessories:- (i) Clamps consisting of two Nos MS plate of size (LxBxT) 140x30x4 mm with three Nos of holes No -2 (ii) Three Nos 10x100mm full threaded nut and bolt. Both the extreme bolts to be welded for more suitability. Make TATA/SAIL/JINDAL.	item5	240	Nos
7	1.06	HDPE sand bags (UV proofed) barrel type double stitched at one end std quality double colour brown and size 840 mm x 360 mm Nylon with suitable tying cord as per IS 14252/1995. Weight should not less than 85 gms as per sample approved by this Regiment.	item6	6000	Nos
8	1.07	U clip made of MS bar of size 8 mm dia 200 mm length and 100 mm wide	item7	240	Nos
9	1.08	Panjis 5 Prong with 'V' Notch made of 8mm dia MS bar, total weight of 6 Kg + 2%	item8	50	Nos
10	1.09	CGI sheet 10' x 3' & Thickness 0.63mm 120 GSM (ISI Marked) Make. TATA/SAIL	item9	50	Nos
11	1.1	CGI sheet 12' x 3' & Thickness 0.63mm 120 GSM (ISI Marked) Make. TATA/SAIL	item10	40	Nos
12	1.11	Punch tape low carbon steel strip of 19mm wide 0.5mm thick having strip of sharp barbs, punched all along the length. The punched tap and core wire are electro galvanized to provide protection from outdoor exposure. The punched tape will be coiled in a spool of 50 mtr length having weight of 2.66 Kg with tolerance ordnance pattern type. As per specification No CQAE/5660/1515/2001/284 Nos & drg No IMCA 0113/4, IMSA 0289/A, IMPD - 1919 and IMPD 820. 04 Strands of punched tape low corbon steel strip shall be provided on each side at regular interval	item11	470	Spool
13	1.12	Barbed Wire 2.24mm dia minimum length of 450m in 50 kg of roll. Galvanized Barbed wire shall be of 2 strands conforming to IS 278- 1978. It shall consist of 2 line wires of 2.24mm dia with dia of barbs 2 mm at 75 mm centre to centre. The barbs shall have a length not less than 13mm and not more than 18 mm with sharp pointed edges. the line and point wires shall be circular in section. Free from scales and other defects and shall be uniformly galvanized. the line wire shall not contain any welds and should be continuous.	item12	300	Kgs
14	1.13	Punched tape concertina coil: 1050mm dia punched type concertina coil (incl spike and handle) with a spiral of 50 turns having a 2.6mm dia core wire of high carbon spring steel of high tensile strength having series of sharp bards punched all long the length on both the side of strips at regular interval. The punched tape and the core wire formed into a coil are electrogalvanised to provide protection against outdoor exposure. The punched tape is mechanically crimped over the cover wire and then formed into a coil at various parts of the periphery of the coil, the individual turns of the coil are connected to each other by steel clips, so that it can be opened up like an accordion. The width of barbed as 9mm and spacing of clips 23.5mm to 24.5mm C/C. Two handles and one spike will be provided at each side of the spiral to facilitate ease of handling and anchoring of the coil to ground. The length of the coil when opened up will be 15m with an effective height of 915mm. The punched tape concertina coil consist of various components like punched tape, spring steel, coil wire. Clip handle and spike. The punched tape concertina coil including handle and spike, weight approximately 15.2 kg (+/-) 5% tolerance per coil. Coil will be wound with bituminized hessian cloth to provide protective packing and Ord pattern as per specification No IND/ENG/ PROV/ 1245/B (Except Clause 11 & 12) for raw material and drawings IMGA 0112/B (Sheet 1&2), IMGA 0112/C (Sheet 2 of 2), IMPD 1817/B, IMPD- 1821/B and IMPD 1822/B.	item13	420	Coil
15	1.14	GI Binding Wire 0.90mm dia confirming to IS 2062/1991	item14	80	Kgs
16	1.15	BABY COIL : Punched Tape Concertina Coil (excluding spike and handle) in 610 mm dia with 50 turns having 2.60 mm dia of high carbon spring steel high tensile core wire as per IS-4454 (Part-I). The Punched Tape 0.5 mm thick and 19.0 mm wide as per specification IS-513 (DD Grade) is mechanically crimped over core wire and then formed into a cell. At various part of the periphery of the coil the individual turns of the coil are connected to each other with 5 steel clips (total 129 Nos per coil) equally spaced so that it opens up like an accordion. The weight of each coil will be 9.5 Kgs (+/- 5%) without packing material. The coil when opened up to 7.50 meters length the effective height of coil will be 590 mm. Each coil wound with bituminized hessian cloth for providing protective coating as per specifications No.CQAE/5600/1602/a for raw material and drawings IMGA-0112/B (Sheet 1 of 2), IMGA-0112/C (Sheet 2 of 2). IMPD-1817/B, IMPD-1820, IMPD-1821/B and IMPD-1822/B.	item15	75	Coil
17	1.16	Steel Roofing Trough (SRT) : ISI Marked 1830 mm long made out of 2mm thick @ 27 kg each with tolerance - 2% to 5% hot rolled carbon steel sheet confirming to IS specification with 16 Nos 12 mm dia long bolt machine made	item16	60	Nos
18	1.17	Steel Roofing Trough (SRT) : Steel Roofing Trough ISI marked 3050mm long made out of 2mm thick @ 47.89 kg each with tolerance 2% to +5% hot rolled carbon steel sheet confirming to IS specification with 16 Nos 12 MM dia 25 MM long bolt.	item17	35	Nos
19	1.18	Steel Cage of size 900x600x750mm made out of 8 mm TMT bars welded together @ 150 mm cc in each panels (04 side walls), panels inter connected with 10mm TMT bar rig 05 Nos for each corner, four clamps at corners on top with nut bolt arrangements	item18	66	Nos
20	1.19	Defoliant Solution (1 Ltrs Pkg)	item19	500	Ltrs
21	1.2	Gloves Gauntlet Protective leather double layer on finger as per IS specification	item20	11	Pair
22	1.21	Pliers side cutting 200mm long	item21	2	Nos
23	1.22	Portable, collapsible protective wall basket HESCO/STAR Gabion Galvanized welded mesh frame (2 cell per set) if size 0.61x 0.75 x 1.22m length 4 feet, width 2 feet and height 2.5 feet). Gabion mesh will be made of 4mm dia Hot dip galvanized low carbon steel wire conform to BS 1052. 145 GSM Alu-Zink coated prime quality raw material conforming to BS/En 10244-2. Wire Tensile 540-770N/MN2. 100% defect free. Gabion frame mesh size is 76.5mmx76.5mm. Mesh Tensile 70% of wire tensile, Mesh frame edge will be spiral hinged through 20mm dia spiral made of 4mm dia galvanized stretchable wire for joining to ensure easy folding and unfolding and 2 in length after folding	item22	20	Nos
24	1.23	Steel Roofing Trough (SRT) : Steel Roofing Trough ISI marked 2400mm long made out of 2mm thick @ 35Kg each with tolerance 2% to +5% hot rolled carbon steel sheet confirming to IS specification with 16 Nos 12 MM dia 25 MM long bolt	item23	50	Nos
25	1.24	Steel Roofing Trough (SRT) : ISI Marked 2440 mm long made out of 2mm thick @ 27 kg each with tolerance - 2% to 5% hot rolled carbon steel sheet confirming to IS specification with 16 Nos 12 mm dia long bolt machine made (8')	item24	70	Nos