}

Maintenance Works To Building And Well In Anchalumoodu Development Centre, chittumala-Kerala

Local Self Government Department has published Maintenance Works To Building And Well In Anchalumoodu Development Centre. Submission Date for this Tender is 16-07-2020. Building Work Tenders in chittumala Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

24806840
Maintenance Works To Building And Well In Anchalumoodu Development Centre
Open Tender
Indian
Kerala
chittumala
16-07-2020

Tender Details

Maintenance Works To Building And Well In Anchalumoodu Development Centre

Key Value

Document Fees
INR 700 /-
EMD
INR 7900.0 /-
Tender Value
INR 3.12 Lakhs /-

BOQ Items

Work Name:Chittumala BP 2020-21:Maintenance of well and building of anchalumoodu vikasana vidhyakendram in thrikkaruva G.P.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 renovation BI01010001010000000000000515BI0100001113
2 1.001 10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. BI01010001010000000000000515BI0100001114 285.138 kilogram
3 1.002 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. BI01010001010000000000000515BI0100001115 368.08 kg
4 1.003 10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works BI01010001010000000000000515BI0100001116 45.47 kg
5 1.004 od562952/2019_2020 : Roofing with GI Powder coated trafford sheet 0.35 mm thick or nearest available thickness with overlaps of 150 mm at ends and GI hook or crank CI bolts and nuts including plain washers and bitumen washers etc complete. BI01010001010000000000000515BI0100001117 68.378 sqm
6 1.005 od562953/2019_2020 : Supplying and fixing 150 mm dia PVC rain water gutter semi circular section including fitting with 32 mmx5mm MS flat supporters at 1m interval etc. complete. BI01010001010000000000000515BI0100001118 26.1 metre
7 1.006 14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. BI01010001010000000000000515BI0100001119 174 sqm
8 1.007 14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work BI01010001010000000000000515BI0100001120 174 sqm
9 1.008 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) BI01010001010000000000000515BI0100001121 6.2 kg
10 1.009 21.2.1 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side BI01010001010000000000000515BI0100001122 2.05 sqm
11 1.01 od728067/2020_2021 : (MODIFIED 11.37)Providing and laying Ceramic glazed floor tiles of size 600x600 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. BI01010001010000000000000515BI0100001123 35.64 sqm
12 1.011 60.2.2 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete BI01010001010000000000000515BI0100001124 5 hour
13 1.012 od732045/2020_2021 : Engaging man for clearing the silt from the well BI01010001010000000000000515BI0100001125 10 no
14 1.013 13.50.3 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works BI01010001010000000000000515BI0100001126 42.528 sqm
15 1.014 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work BI01010001010000000000000515BI0100001127 42.528 sqm
16 1.015 od744511/2020_2021 : Supplying and providing 230 volt 3 core cable for 1 HP submersible pump BI01010001010000000000000515BI0100001128 5 metre
17 1.016 od744512/2020_2021 : Supplying and fixing 1HP submersible pumpset BI01010001010000000000000515BI0100001129 1 each
18 1.017 od744513/2020_2021 : Supplying and fixing panel board for 1 HP submersible pumpset BI01010001010000000000000515BI0100001130 1 each
19 1.018 50.18.7.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall BI01010001010000000000000515BI0100001131 30 metre
20 1.019 50.18.7.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall BI01010001010000000000000515BI0100001132 20 metre
21 1.02 50.18.7.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall BI01010001010000000000000515BI0100001133 5 metre
22 1.021 17.7.3 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps BI01010001010000000000000515BI0100001134 1 each
23 1.022 25.7 : Designing, fabricating, testing, installing and fixing in position Curtain Wall withAluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grademineral core sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanisedwith serrations and serrated washers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mock ups at site, cost of all samples of the individual components for testing inan approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wallwith aluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external face ofthe curtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places. BI01010001010000000000000515BI0100001135 3.6 sqm
24 1.023 od744936/2020_2021 : Supplying and fixing molded letters,nearest 25 cm size cost including fixing charges etc BI01010001010000000000000515BI0100001136 25 each
25 1.024 od744937/2020_2021 : Supplying and fixing molded letters,nearest 15 cm size cost including fixing charges etc BI01010001010000000000000515BI0100001137 10 each
26 2 INTERLOCK BLOCK WORK BI01010001010000000000000515BI0100001138
27 2.001 od728598/2020_2021 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. BI01010001010000000000000515BI0100001139 71.65 sqm
28 2.002 od731343/2020_2021 : od632200/2020_2021 :MorD: Providing concrete for plain/reinforced concrete in open foundations complete<br>as<br>per drawings and technical specifications Clause 802, 803, 1202 & 1203I.P.C.C grade M 10(i)Nominal mix<br>1:3:6 (modified 11.4.1.1 form work excluded) BI01010001010000000000000515BI0100001140 1.026 cum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail