Various Maintenance Work Under Eudsd , Clock Tower , Aligarh-1 Cartage of following poles Store centre or from any other place to the respective site of work through the Kachha Pacca road including the work of its loading & unloading at the respective ends also including the work of dragging etc. and also including the cost of labour, T&P carrier etc. required for proper completion of work. 2 11 Mtrs. ST Poles 3 09 Mtrs. ST Poles 4 8.5/9.0 Mtrs.PCC Poles 5 Cartage of line material viz Weasal Conductor, GI earth wire, Cross Arm, Angle, Channel, Insulator, Clamps & other line material from Store centre or from any other place to the respective site of work through the Kachha Pacca road including the work of its loading & unloading at the respective ends also including the work of dragging etc. and also including the cost of labour, T&P carrier etc. required for proper completion of work. (Dist. 0 to 50 Kms.). 6 Replacement of damaged pole by opening of all existing accessories and conductor from damaged pole properly and removal of damaged pole and erect the new pole at same place including fixing of all existing accessories and conductor on the new pole etc. as per direction of supervising engineer. Its including the cost of all labour, T&P etc. (including carriage of damaged pole to other place) required for proper completion of work. 7 11 Mtrs. ST Poles 8 09 Mtrs. ST Poles 9 8.5/9.0 Mtrs.PCC Poles 10 Erection of following single support including fixing complete HT/LT fittings as per RESSPO Munual including the cost of labour, T&P and carrier etc. required for proper completion of work. 11 11 Mtrs. ST Poles 12 09 Mtrs. ST Poles 13 8.5/9.0 Mtrs.PCC Poles 14 Grouting of single support as per RESSPO Manual including of the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. 15 11 Mtrs. ST Poles 16 09 Mtrs. ST Poles 17 8.5/9.0 Mtrs.PCC Poles 18 Dismentling of double pole structure on ST Poles by digging of pits. Opening and fitting of all relevant accessories and its carraige from site to store including loading & unloading at both ends as per RESPO Norms. 19 Erection & grouting of following Double Pole structure including fixing complete HT/LT fitting as per RESSPO Manual including the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. 20 11 Mtrs. ST Poles 21 8.5/9.0 Mtrs.PCC Poles 22 Erection, grouting and nuzzling of stay set including the work of nozzling etc. as per RESPO manual and also including the cost of arrangement of all grouting material, labour, T&P etc. required for proper completion of work as per RESSPO Manual. 23 Fixing & connecting of earthing rods as per RESSPO Manual including the cost of labour, T&P etc. required for proper completion of work. 24 Removal of existing L.T. conductor from damaged line / pole including opening of jumpers etc. as per requirement of site and it carriage from site to store as per direction of supervising Engineer. 25 Laying, sagging, stringing and jumpering / binding of following Conductor on the pole as per RESPO manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work. 26 ACSR Dog Conductor 27 ACSR Weasel Conductor 28 Resagging of loose 11 KV / L.T. lines as per direction of supervising engineer. Its includes the cost of labour, T&P etc. required for proper completion of work. 29 ACSR Dog Conductor 30 ACSR Weasel Conductor 31 A. B. Cable 32 Laying spreading, lifting and final sagging of Aerial Bunched Cable of following size including fixing of all accessories as per RESSPO Manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work. : 33 3x50+1x35+1x16 sq.mm. 34 3x95+1x70+1x16 sq.mm 35 3x120+1x90+1x16 sq.mm 36 Fixing of LT Distribution box including making connections of distribution box with LT mains by piercing clamps for Aerial Bunched Cable.The work will also include the opening of the service connection of the consumer and its connecting in distribution box. 37 Fabrication of T-off Channel as per RESSPO Norms. 38 Fabrication of Top Channel as per RESSPO Norms. 39 Fabrication of Dropper Channel as per RESSPO Norms. 40 Fabrication of T/F Base Channel/Angle as per RESSPO Norms. 41 Providing & fixing of top hemper use of 33KV/11 Kv line as per RESSPO Norms. 42 Safe carriage of 33 KV and 11 KV various size Cable from Store Centre, Sarsol to the respective site of work including cost of shifting of drum from inside of store, removing of cable form drum and re-rolling of extra removed cable including loading & unloading at the respective ends. 43 11 KV XLPE cable zie 3x70/3x120sq.mm. 44 11 KV XLPE cable size 3x185/3x300 sq.mm. 45 33 KV XLPE cable 3x300 sq.mm. 46 Laying of 33KV and 11 KV various size Cable including making proper connections with Transformer LT side and LT line. The work includes the cost of labour, T&P and carrier etc. required for proper completion of work. 47 11 KV XLPE cable zie 3x70/3x120sq.mm. 48 11 KV XLPE cable size 3x185/3x300 sq.mm. 49 33 KV XLPE cable 3x300 sq.mm. 50 Filling of 11 KV I/D & O/D cable jointing kit as per RESSPO Norms. 51 Filling of 33 KV I/D & O/D cable jointing kit as per RESSPO Norms. 52 Dismantling and removal of existing 11 KV XLPE Cable and then stacking in the respective JE’s (Store) as per direction of Supervising Engineer. It includes the work of cartage, cost of labour, T&P carrier etc. required for proper completion of work. 53 Dismantling and removal of existing 11 KV AB Cable and then stacking in the respective JE’s (Store) as per direction of Supervising Engineer. It includes the work of cartage, cost of labour, T&P carrier etc. required for proper completion of work. 54 Removal of lush and spreader tree branches in only very dense area by cutting, chopping in between 33 KV line emanating from 132 KV sub-stations. 55 Removal of lush and spreaded tree branches in only very dense area by cutting, chopping in between 11 KV line emanating from 33 KV sub-station as well as LT lines : n(a) Cutting them manually n(b) Downing of branches fizzled in between wires. n(c) Loading and collecting manually to make a heap so as to easily removed be the forest deptt. n
