Road And Building Department-RBD has published Construction Of Hostel Block Of Government College Physical Education Bhubaneswar , During 2020-21 Composite Work. Submission Date for this Tender is 20-07-2020. Building Work Tenders in BHUBANESWAR Odisha. Bidders can get complete Tender details and download the document.
Name of Work:- Construction of Girls and Boys Hostel for Government College of Physical Education at Bhubaneswar (Composite work). | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earthwork excavation in all kinds of soil as per drawing and technical specification including dressing and levelling the bed, sides and bottom and removing the excavated earth and depositing the same away from the work site within initial lead of 50m and initial lift of 1.5m, including cost, conveyance of all materials, all labour, T&P articles required for the work, including shoring, shuttering, propping and dewatering if required etc. complete in all respect as per direction of the Engineer-in-Charge. | 1629.77 | Cum | |
2 | 2 | Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. | 246.32 | Cum | |
3 | 3 | Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. | 787.23 | Cum | |
4 | 4 | Carriage / disposal of excavated surplus earth from the worksite by mechanical means within a lead of 5Km including loading and unloading etc. complete. in all respect as per direction of Engineer-in-Charge. | 376.47 | Cum | |
5 | 5 | Supplying and filling in foundation trenches and plinth with sand, well watered and rammed in layers not exceeding 23cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and , materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. | 1672.28 | Cum | |
6 | 6 | Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm (1 1/2") 0 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading,cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. \n | 361.34 | Cum | |
7 | 7 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chipsincluding watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | |||
8 | 8 | GROUND FLOOR | 13.5 | Cum | |
9 | 9 | FIRST FLOOR | 12.84 | Cum | |
10 | 10 | SECOND FLOOR | 19.24 | Cum | |
11 | 11 | Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 250 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge. | |||
12 | 12 | GROUND FLOOR | |||
13 | 13 | Foundation & bases of column | 200.33 | cum | |
14 | 14 | Plinth Beam | 120.78 | cum | |
15 | 15 | Pedestal & Columns | 151.29 | cum | |
16 | 16 | Roof Beam | 104.98 | cum | |
17 | 17 | Lintel | 30.64 | cum | |
18 | 18 | Chajja | 72.44 | sqm | |
19 | 19 | R.C.C. floor and roof slab | 169.36 | cum | |
20 | 20 | R.C.C. staircase | 15 | cum | |
21 | 21 | R.C.C wall | 8 | cum | |
22 | 22 | FIRST FLOOR | |||
23 | 23 | Columns | 69.94 | cum | |
24 | 24 | Roof Beam | 155.02 | cum | |
25 | 25 | Lintel | 37.58 | cum | |
26 | 26 | Chajja | 107.06 | sqm | |
27 | 27 | R.C.C. floor and roof slabs | 224.08 | cum | |
28 | 28 | R.C.C. staircase | 11.62 | cum | |
29 | 29 | SECOND FLOOR | |||
30 | 30 | Column | 89.44 | cum | |
31 | 31 | roof beam | 162.08 | cum | |
32 | 32 | Lintel | 40.12 | cum | |
33 | 33 | Chajja | 117.543 | sqm | |
34 | 34 | R.C.C. floor and roof slabs | 236.52 | cum | |
35 | 35 | R.C.C. staircase | 11.62 | cum | |
36 | 36 | Cutting, straightening coiled or bent up M.S. rods, HYSD steel or Tor Steel welding or jointing if necessary, bending, binding, tying the grills as required for RCC works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, M.S. rods, HYSD steel or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer-in-Charge (payment will be made according to the actual weight of M.S. rod, HYSD steel or Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost). | |||
37 | 37 | GROUND FLOOR | 1036.04 | Qntl | |
38 | 38 | FIRST FLOOR | 695.88 | Qntl | |
39 | 39 | SECOND FLOOR | 714.07 | Qntl | |
40 | 40 | Fly Ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with ordinary portland cement (OPC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge | |||
41 | 41 | Foundation & Plinth | 331.8 | Cum | |
42 | 42 | GROUND FLOOR | 622.36 | Cum | |
43 | 43 | FIRST FLOOR | 413.58 | Cum | |
44 | 44 | SECOND FLOOR | 505.62 | Cum | |
45 | 45 | Fly Ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:4) with ordinary portland cement (OPC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royaltiesof all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge | |||
46 | 46 | GROUND FLOOR | 33.58 | cum | |
47 | 47 | FIRST FLOOR | 48.66 | cum | |
48 | 48 | SECOND FLOOR | 48.66 | cum | |
49 | 49 | Providing 16 mm. thick cement plaster (1:6) finished smooth to inside brick walls after racking out the joints including watering and curing with cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. | |||
50 | 50 | GROUND FLOOR | 4534.88 | Sqm | |
51 | 51 | FIRST FLOOR | 3609.06 | Sqm | |
52 | 52 | SECOND FLOOR | 3794.34 | sqm | |
53 | 53 | Providing 6mm thick cement plaster in cement mortar of (1:4) to RCC surfaces such as ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening/chipping, scraping and cleaning and finishing the plastered surface smooth using wooden floats, bars, etc. only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawing including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.\n | |||
54 | 54 | GROUND FLOOR | 1670.14 | sqm | |
55 | 55 | FIRST FLOOR | 1600.88 | sqm | |
56 | 56 | SECOND FLOOR | 1700.36 | Sqm | |
57 | 57 | Providing 12 mm. thick cement plaster (1:6) finished smooth to inside brick walls after racking out the joints including watering and curing with cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. | |||
58 | 58 | GROUND FLOOR | 2042.96 | Sqm | |
59 | 59 | FIRST FLOOR | 1269.54 | Sqm | |
60 | 60 | SECOND FLOOR | 1608.42 | sqm | |
61 | 61 | Supplying, fitting & fixing of Vitrified floor tiles of 600mmx600mm Do laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) | |||
62 | 62 | GROUND FLOOR | 783.23 | sqm | |
63 | 63 | FIRST FLOOR | 814.48 | Sqm | |
64 | 64 | SECOND FLOOR | 724.04 | sqm | |
65 | 65 | Providing, Fitting and Fixing of charged Vitrified Wall Tile (size 800mm x 800mm) in dados / skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete as per specification and direction of the Engineer-in-Charge. | |||
66 | 66 | GROUND FLOOR | 119.68 | sqm | |
67 | 67 | FIRST FLOOR | 127.72 | Sqm | |
68 | 68 | SECOND FLOOR | 127.71 | sqm | |
69 | 69 | Providing Granite stone prepolished 10mm thick of area above 0.40 Sqm in dado/skirting,riser of steps of approved quality, colour and size in dado/ skirting,riser of steps,wall on 12mm thick bed of cement mortar of mix (1:3) laid in proper plumb and line with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, Labour cess ,sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. | |||
70 | 70 | GROUND FLOOR | 80.68 | sqm | |
71 | 71 | FIRST FLOOR | 63.83 | sqm | |
72 | 72 | SECOND FLOOR | 63.83 | sqm | |
73 | 73 | Providing Granite stone prepolished 10mm thick of above 0.10sqm up to 0.40sqm in dado of approved quality, colour and size in dado, riser of steps and dado of landings in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) (Without wax polishing) with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. | |||
74 | 74 | GROUND FLOOR | 34.78 | sqm | |
75 | 75 | FIRST FLOOR | 17.64 | sqm | |
76 | 76 | SECOND FLOOR | 17.64 | sqm | |
77 | 77 | Providing,Fixing 16m thick Kota stone of above 0.10sqm size tiles in floors treads or steps and landing on 20mm thick cement mortar (1:4) (1cement : 4 course and) and filling joints with of approved quality including cost, conveyance, taxes, cost of all labour etc. complete. | |||
78 | 78 | GROUND FLOOR | 294.81 | sqm | |
79 | 79 | Providing Kota stone 16mm thick of above 0.10 sqm size in dado of approved quality, colour and size in dado, riser of steps and dado of landings in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. | |||
80 | 80 | GROUND FLOOR | 26.8 | sqm | |
81 | 81 | Supplying, fitting and fixing of well dressed seasoned Sal wood Choukath of size 5”x21/2” wrought and put up in door frame including two coat of coallaring to wall and lintel side faces in all floors including cost, conveyance of all materials, all labour T&P etc. complete as directed by the Engineer-in-Charge. | |||
82 | 82 | GROUND FLOOR | 2.28 | Cum | |
83 | 83 | FIRST FLOOR | 2.08 | Cum | |
84 | 84 | THIRD FLOOR | 2.28 | Cum | |
85 | 85 | Providing , fitting & fixing of 34mm thick flush door shutter with 32mm thick BWR block board and paisting 1 mm thick laminate with anti-bacterial property to be pasted with adhesive including fitting & fixing of all fixtures like godrej make ofice lock haveing model. No. 9168. Godrej make door clouser having model no- 8340. including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge. | |||
86 | 86 | GROUND FLOOR | 108.64 | sqm | |
87 | 87 | FIRST FLOOR | 97.3 | sqm | |
88 | 88 | SECOND FLOOR | 107.38 | sqm | |
89 | 89 | Supplying, fitting and fixing of M.S grills, Grill window ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.) | |||
90 | 90 | GROUND FLOOR | 2643.84 | KG | |
91 | 91 | FIRST FLOOR | 2986.48 | KG | |
92 | 92 | SECOND FLOOR | 3403.64 | KG | |
93 | 93 | Finishing plastered surfaces of walls with Cement based Putty & making smooth to receive painting including cost of Birla Putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, labour T&P etc. complete the work as per the direction of engineer incharge. (interior) | |||
94 | 94 | GROUND FLOOR | 4063.98 | Sqm | |
95 | 95 | FIRST FLOOR | 5209.94 | Sqm | |
96 | 96 | SECOND FLOOR | 5494.7 | Sqm | |
97 | 97 | Providing Wall painting with primer(oil bound )one coat to the internal wall surface including cost of all materials, labour, Tools & Plant, Brushes etc. complete in all respects as per the direction of engineer incharge.(interior) | |||
98 | 98 | GROUND FLOOR | 4063.98 | Sqm | |
99 | 99 | FIRST FLOOR | 5209.94 | Sqm | |
100 | 100 | SECOND FLOOR | 5494.7 | Sqm | |
101 | 101 | Providing Wall painting with Oil bound distemper paint two and more coats to all New work to get an even shade including cost of all materials, labour, Tools & Plant, Brushes etc. complete in all respects as per the direction of engineer incharge.(interior) | |||
102 | 102 | GROUND FLOOR | 6205.02 | Sqm | |
103 | 103 | FIRST FLOOR | 5209.94 | Sqm | |
104 | 104 | SECOND FLOOR | 5494.7 | Sqm | |
105 | 105 | Painting 2 (Two) or more coats with Weather Coat Paint of premium brand Such as Asian/ Berger/ ICI paints or equivalent of approved quality & colour, using required quantities of paint as specified by the manufacturer to give an even shade over a coat of wall priming(water based) on the finished external plastered surface at all height , watering the surface before applying the Weather Coat Paint and curing for the required period including cost, coveyance, loading , unloading ,stacking and all taxes , cost of all Labour, Labour cess, Sundries ,Scafffolding ,Staging and T&P etc. required for the work complete in all respect as directed by the Engineer-in-charge. | |||
106 | 106 | GROUND FLOOR | 1280.96 | Sqm | |
107 | 107 | FIRST FLOOR | 1269.54 | Sqm | |
108 | 108 | SECOND FLOOR | 1608.42 | Sqm | |
109 | 109 | Providing and Painting two coats with synthetic enamel paint over a coat of priming on iron work of approved quality and approved shade confirming to ISI on steel works to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, conveyance of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work complete in all respect as directed by Engineer-In-Charge | |||
110 | 110 | GROUND FLOOR | 88.14 | Sqm | |
111 | 111 | FIRST FLOOR | 99.56 | Sqm | |
112 | 112 | SECOND FLOOR | 113.48 | Sqm | |
113 | 113 | Providing approved primer of one coat to the Iron work including cost of all materials, labour, Tools & Plant, Brushes etc. complete in all respects as directed by Engineer-In-Charge. | |||
114 | 114 | GROUND FLOOR | 88.14 | Sqm | |
115 | 115 | FIRST FLOOR | 99.56 | Sqm | |
116 | 116 | SECOND FLOOR | 113.48 | Sqm | |
117 | 117 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. | 914.1 | kg | |
118 | 119 | Providing 2.5 cm thick grading concrete(1:2:2) on roof slab using 6mm size hard granite chips including hoisting, lowering, laying, concrete with watering, curing in all floors with cost, conveyances, royality of all materials, all labour, labour cess, T&P etc. complete as per direction of the Engineer in charge | |||
119 | 120 | SECOND FLOOR | 1493.84 | Sqm | |
120 | 121 | Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge. | 1140.08 | Sqm | |
121 | 122 | Providing and fixing of UPVC sliding windows 2 track sliding-60 series/Top hung ventilator of any approved make ,duly manufactured using upvc reinforced profiles of 62mm x 60mm x 2.25mm for outer frame, 66mm x 38mm x 2.25mm for sliding shutter frames capable of mounting single glazing system,structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 1.2 mm prefabricated and welded through fusion welding & the window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with EPDM weathering seal including the cost of all materials,necessary locking arrangements ,fittings,cost of labour,T&P ,etc complete as per direction of Engineer-in-charge. | |||
122 | 123 | GROUND FLOOR | 88.13 | Sqm | |
123 | 124 | FIRST FLOOR | 99.56 | Sqm | |
124 | 125 | SECOND FLOOR | 113.48 | Sqm | |
125 | 126 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdor floors such as footpath, courtyard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge | 32.78 | Sqm | |
126 | 128 | Providing, fitting and fixing of Sikadur Combiflex SG 20P 200 and sealed by Sikadur 31C @ 1.4kg per meter over the expansion joints after cleaning the joints and applying of Sikadur 32 @ 200 gms per meter Epoxy bonding agent and levelled by Sikagrout 214 @ 8kg per meter and covered with 300mm wide 16 gauge Aluminium sheet complete including cost, conveyance, taxes of all materials, labour, transportation charges etc as per specification and direction of the Engineer-in-charge. | 96.51 | Rmt | |
127 | 129 | Providing neat cement punning over plastered/ concrete surface including watering and curing complete with cost, coveyance, loading and unloading, royalties of all materials and cost of all labour, T&P and scaffolding required for the work etc. as directed by the Engineer in charge. | 246 | Sqm | |
128 | 130 | E.I.WORK | |||
129 | 131 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Make of wire-Finolex/L&T/Anchor/Havels/V Guard/KEI). | 680 | Nos. | |
130 | 132 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. | 80 | Nos. | |
131 | 133 | Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,4 module 18SWG modular GI box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. .(Make-Anchor/Panasonic /Crabtree/Legrand/L&T) | 24 | Nos. | |
132 | 134 | Supplying and fixing of 4module GI box with cover on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15 / 16 amps socket outlet and 15 / 16 amps modular type switch, connection, painting etc as required.(Make-Anchor/Panasonic /Crabtree/Legrand/L&T) | 24 | Nos. | |
133 | 135 | Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,6 module 18SWG modular GI box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex /KEI / Anchor /polycab/ Havels ) (6 Module (200mmx75mm)) | 192 | Nos. | |
134 | 136 | Supply and fixing of 20 amp 240 V SPN industrial type socket outlet with 2 pole and earth metal encloser plug top along with 20 amp "C" series SP MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete connections, testing and commissionig etc. as required.(Make-Anchor/Panasonic/Legrand/Siemens/L&T) | 16 | NO | |
135 | 137 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.(Make-Anchor/Panasonic/Legrand/Siemens/L&T) | 160 | Nos. | |
136 | 138 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.(Make-Anchor/Panasonic/Legrand/Siemens/L&T) | 20 | Nos. | |
137 | 139 | Wiring to Telephone Socket Outlet from Junction Box with 0.5 mm2 Twin Pair Copper Conductor Telephone Wire run inside prelaid PVC Conduit complete including termination, testing etc complete as required and as per Direction of Engineer-In-Charge. ( Make of wire Finolex / Anchor / Havells /KEI/L&T) | 400 | Mtrs. | |
138 | 140 | Supply, delivery, installation and testing of TV Antenna Wires RG6 in PVC Pipe and making good the damages caused complete as required and as per Direction of Engineer-In-Charge. ( Make of wire Finolex / Anchor / Havells /Polycab/KEI/L&T)\n | 300 | Mtrs. | |
139 | 141 | Supply, delivery and laying of following sizes of 2 mm Wall thickness rigid PVC Conduit Concealed in Wall/ Column/ Roof Slab of the Building or mounted on surface along with other accessories and 18 SWG GI Fish Wire complete for Telephone / TV / Computer / Circuit or Sub main wiring as required & as per Direction of Engineer-In-Charge. Make : (AKG/Precison/Anchor ) | |||
140 | 142 | 19 mm dia. | 60 | Mtrs. | |
141 | 143 | 25 mm dia. | 70 | Mtrs. | |
142 | 144 | Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor FRLS Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. (Make of wire Finolex/Anchor/Havels/KEI/Polycab) | |||
143 | 145 | 2 Nos. Single Core 1.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (Make of wire Finolex/Anchor/Havels/KEI) | 500 | Mtrs. | |
144 | 146 | 2 Nos. Single Core 2.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (Make of wire Finolex/Anchor/Havels/KEI) | 2400 | Mtrs. | |
145 | 147 | 2 Nos. Single Core 4.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Finolex/Anchor/Havels/KEI) | 300 | Mtrs. | |
146 | 148 | 2 Nos. Single Core 6.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 6 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Finolex/Anchor/Havels/KEI) | 400 | Mtrs. | |
147 | 149 | 2 Nos. Single Core 10.0 mm2 FRLS Copper Wire for Phase and Neutral and 2 No. Single Core 6 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Finolex/Anchor/Havels/KEI) | 500 | Mtrs. | |
148 | 150 | Supplying, delivery, installation, testing and commissioning of Flush mounted Cat 6 DUAL Information Outlet Box. | 192 | Nos. | |
149 | 151 | Supplying, laying of UTP 4 PAIR Cat 6 lane Wire in the existing surace/recessed PVC Pipe as required.(Make of wire Finolex/Anchor/Havels/KEI) | 5000 | Mtrs. | |
150 | 152 | BRANCH DISTRIBUTION BOARDS: | |||
151 | 153 | Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door .(Make-Anchor/Panasonic /Legrand/Siemens/L&T) | 12 | Nos. | |
152 | 154 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) (Make-Anchor/Panasonic/Legrand/Siemens) 4way (4 + 12), Double door | 6 | Nos. | |
153 | 155 | Supplying and fixing of 40A 2pole RCCB double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required..((Make-Anchor/Panasonic/Legrand/Siemens/L&T) | 12 | Nos. | |
154 | 156 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required..(Make-Anchor/Panasonic/Legrand/Siemens/L&T) | 120 | Nos. | |
155 | 157 | Supplying and fixing 40 amp 4 pole mcb single pole in the MCB complete etc. as required. | 6 | Nos. | |
156 | 158 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. | 20 | Nos. | |
157 | 159 | MAIN DISTRIBUTION BOARD | |||
158 | 160 | PANEL BOARD: | |||
159 | 161 | Supplying, Installing, Testing and Energizing MS Cubical type Panel Board made of 2 mm thick CRCA Sheet with Hinged Door duly Fabricated with required MS Angle and Channels of adequate size, duly treated and Powder Coated (shall have Hinged Door at the Front and Detachable Plates at Back if requirement and at Top / Bottom for Cable / Wire Entry / Exit as per the Direction of Engineer-In-Charge and approved GA Drawing with following provisions.Main Panel Board: Incoming: 160 Amp. 4P MCCB 16 KA (Thermal Magnetic Release) - 1No,200 AMP 4WAY MANUAL CHANGOVER SWITCH 1 NO ,Equiments: 4 Nos. 200 Amp. Copper Bus Bar coated with PVC Heat Shrunk Sleeve (Colour Code). 2 No. VAF Digital Meter.,3 Nos. RYB LED, Indicator. 3Nos.160 / 5 Amp. C.T. Operated. ,Outgoing:1 Nos 80 AMP 4P MCB 10 KA UPS,3 Nos32 AMP 2P MCB 10 KA,5 Nos. 63 Amp. 4P MCB 10 KA.With spreadentinle & cable alloy | 2 | SET | |
160 | 162 | FLOOR LIGHT Panel: | |||
161 | 163 | Incoming: 63 Amp. 4P MCB- 10 KA 1 No., R Y B LED Indicator- 3 Nos., 63 Amp. Electrolytic Copper Bus Bar - 4 Nos. Outgoing: 40 Amp. DP MCB 10 KA -3 Nos. | 6 | Set | |
162 | 164 | UPS PANEL with 80 A 4P MCB (10KA) as Incomer , Outgoings-40A 4P MCB (10KA)-3 Nos with E.C Bus Bars. | 2 | Set | |
163 | 165 | FITTINGS & FIXTURES: | |||
164 | 166 | Supply,Installation and testing of following types of LED Tube Fixtures Directly on Wall / Ceiling/ Structure of Building with all accessories such as Electronics Ballast, Lamps, Stove Enameled Box, Perplex Sheet Cover etc. complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge. (Make-Panasonic/PHILIPS/LT/Halonix/Bajaj/Crompton/Havells ) | |||
165 | 167 | Supply of Surface mounted indoor type 20 WATT LED TUBE with aluminium housing and Lamp (Make-Panasonic/ PHILIPS/LT (Make-Panasonic/PHILIPS/LT/Halonix/Bajaj/Crompton/Havells ) | 296 | Nos. | |
166 | 168 | Supply of 20 watt Surface mounted indoor type Round LED Luminaire with LED GLARE FREE opal diffuser ,IP20 Lamp (Make-Panasonic/PHILIPS/LT/Halonix/Bajaj/Crompton/Havells ) | 80 | Nos. | |
167 | 169 | Supply 45 W LED premises LIGHT 5700 CCT fixtures similar to Pansonic cat no-PSTM16458.(Make-Panasonic/PHILIPS/LT/Halonix/Bajaj/Crompton/Havells) | 18 | Nos. | |
168 | 170 | 10 WATT LED BOLLARD LIGHT of IP 65 protection comprises of galvanized extruded mild steel pipe housing with opal polycarbonate diffuser and aluminium base. Theluminaire efficiency should be 90 % or more. (Make: Panasonc /PHILIPS/LT /Halonix/Bajaj/Crompton/Havells) | 8 | NOS | |
169 | 171 | Supply of 9 WATT LED type Luminaire with LED Lamp. Make PHILIPS/PANASONIC/LT/Halonix/Havells/Crompton) | 100 | NOS | |
170 | 172 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. | 502 | NOS | |
171 | 173 | Numbering of ceiling fan/ exhaust fan/ light fittings as required. | 760 | Nos. | |
172 | 174 | Supply, delivery, installation and testing of following Sweeps of High Speed Energy Efficient A.C. Ceiling Fan complete with Fan Blades, Down Rod, Canopies & Capacitor etc. including supply of Sundry Materials, making connection from the suitable point outlet but excluding cost of Fan Regulator complete as required and as per the Direction of Engineer-In-Charge.Make:Anchor/Panasonic /Havells / Khaitan/Usha | |||
173 | 175 | 1200 mm Sweep Ceiling Fan. | 160 | Nos. | |
174 | 176 | Supply, delivery, installation & testing of following Sweep & Speed metal Exhaust Fan on Existing Sheet Metal Switch Board including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge Make:Anchor/Panasonic/Havells/Khaitan/Usha | |||
175 | 177 | 230 mm EXHAUST FAN 1400 RPM. | 80 | Nos. | |
176 | 178 | EARTHING: | |||
177 | 179 | Providing and fixing 25 mm X 6 mm gi strip surface or in recess as strip electrode for connections etc. as required. | 240 | meter | |
178 | 180 | Providing and fixing 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required | 400 | meter | |
179 | 181 | Earthing with G.I. earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required. | 20 | Set | |
180 | 182 | CABLE | |||
181 | 183 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required. | 100 | Mtr | |
182 | 184 | Supply, Laying and Testing of following Size XLPE insulated 1.1 Kv alluminium armoued cable making good the damages caused as required complete as per Direction of Engineer-In-Charge. MAKE: KEI/POLYCAB/GLOSTER | |||
183 | 185 | 70 mm2 3 1/2 Core , Al Armoured , XLPE Cable | 120 | Mtrs. | |
184 | 186 | Supply of all materials like cable lugs, gland etc as required & terminal of below mentioned cable complete as per required technical specifications & direction of EIC | |||
185 | 187 | 70 mm2 3 1/2 Core , Al Armoured , XLPE Cable | 8 | Nos | |
186 | 188 | Supplying of following Materials | |||
187 | 189 | First Aid Box. | 2 | Set. | |
188 | 190 | Shock Treatment Chart (Odia / Hindi & English). | 2 | Set | |
189 | 191 | 8 mm thick Rubber Mat. | 24 | Sqmtr. | |
190 | 192 | ABS type / CO2 type Fire Extinguisher of 4.5 Kg. | 2 | Set | |
191 | 193 | Danger Board. | 4 | Set | |
192 | 194 | SMOKE DETECTION MANUAL FIRE ALARM & EXTNIGUSHIER SYSTEM | |||
193 | 195 | 10 zone control panel for fire alarm system with\nfollowing:-\n250 Watt amplifier racks suitable for operation on\n230V AC/24V DC supply conforming to IEC-268-3\ncomplete with all accessories as required 2 Nos.\n(one to act as standby) Talk back master station with LED PTT (Press to talk)\npush button for operation on 230V AC/24 V DC supply\nconforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit 1 set.Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required 1 Set. Amplifier change over switch for inter changing\namplifier 1 No.Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required 1 No.Gooseneck microphone with stand and ON/OFFswitch 1 No.Mains ON/OFF switch, fuse indication lamps,DC and AC voltMetres & Ammetres terminal blocks etc. complete as required 1 Set.\nBattery charger trickle cum boost to take complete\nload of fire alarm & PA system complete with all\naccessories including providing & fixing of 2 nos.12 volt,\n60 AH each sealed maintenance free batteries 1 Set. | 2 | Set | |
194 | 196 | Supply, installation, testing and commissioning of stylish low profile designed conventional Photo electric smoke detector Make-Siemens/ Honeywell /GST/Anchor/Panasonic | 150 | Set | |
195 | 197 | Supply, installation, testing and commissioning of analogue soft addressing resettable PVC body Manual call point with integral short circuit isolator etc as reqd.Make-Siemens/ Honeywell /GST/Anchor/Panasonic | 20 | Set | |
196 | 198 | Supply, installation, testing and commissioning of soft addressed wall mounting / ceiling mounting sensor based sounder low profile designed The sounder uttilises high intensity LEDS to provided highly visiable red coloured flash light with sound to alert (Up to 100 DB) occupancies for evacution during fire etc as reqd. Make-Siemens/ Honeywell /GST/Anchor/Panasonic | 20 | Set | |
197 | 199 | Supplying and drawing followings sizes of PVC insulated copper conductor 2 core 1.5 sqmm flexible cable in the existing surface / recessed steel conduit etc as reqd.Make-Polycab/Havells/Anchor | 1600 | Mtrs. | |
198 | 200 | S/I/T/C of ABC type fire extinguishers of 6 Kg capacity with ISI Mark as per IS :15683 fillied with mono amonium phospet powder ,silicon coated pressurised by dry nitrogen gas,applicable on all clasess of fire with 5 years self life . Make-Minimax/Ceasefire/supremex | 16 | NO | |
199 | 201 | S/I/T/C of CO2 type Fire Extinguisher of capacity 4.5 kg filled with Co2 Gas as per IS 15222 with control discharge mechanism fitted with Hose & Horn applicable on Class B fire rating 21B confirms to IS 15683, bearing ISI mark. Co2 Cylinder as per IS 7285 Make-Minimax/Ceasefire/supremex | 6 | NO | |
200 | 202 | DG SET | |||
201 | 203 | Supply, installation, testing and commissioning of silent type water cooled DG set conforming to latest environment protection regulations for emission and noise level comprising of radiator, power pack, electronic governor, vertical multi-cylinder diesel engine equipped with flywheel having Prime Power Rating of 200 KVA, 415 Volts at 1500 RPM, 0.8 lagging power factor at 415 volt suitable for 50 Hz, 3 phase system & for 0.8 Load Factor AMF PANEL WITH Controller with inbult auto start stop isolater panel and consisting of the followings:(MAKE: Mahindra Navistar ,JACKSON,Sterling Generator,Captive Power) Full electronic authority diesel engine 4 stroke radiator water cooled, electric start with electronic fuel injection system of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50%RH & at 1000 Meter MSL and conforming to BS:5514, BS:649, IS:10000, capable of taking 80% block load at the start and 10% over loading for one hour after 12 hours of continuous operation. The engine shall be fitted complete with all the required accessories.isolater panel with additional MCCB with controller inbuilt Start auto stop system & static battery charger | 1 | NO | |
202 | 204 | Installation of D.G. sets on the foundation complete including making RCC foundation, providing necessary anti-vibration mountings, MS equal angle of 50x50x6mm on all sides, HDPE/ GI pipe for cable entry, battery and battery stand made out of 50x6mm equal angles, battery tray etc. including first filling of lub oil, first filling of diesel for testing & commissioning & necessary load for testing & commissioning. (Foundation drawing shall be as per manufacturer/ PWD specifications keeping the bearing capacity of soil into consideration and shall be got aproved from engineer-incharge)accessories.isolater panel with additional MCCB with controller inbuilt Start auto stop system & static battery charger | 1 | NO | |
203 | 205 | Supply, Laying and Testing of following Size XLPE insulated 1.1 Kv alluminium armoued cable 300 mm2 3 1/2 Core , Al Armoured , XLPE Cable (02 Runs) making good the damages caused as required complete as per Direction of Engineer-In-Charge.MAKE POLYCAB/KEI | 120 | MTRS | |
204 | 206 | SUPPLY of all materials like cable lugs, gland etc as required & terminal of below mentioned cable complete as per required technical specifications & direction of EIC | 4 | NO | |
205 | 207 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required | 82 | MTRS | |
206 | 208 | P.H.WORK | |||
207 | 209 | Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming toC-PVC (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge | |||
208 | 210 | ground floor to 2nd floor | |||
209 | 211 | 20mm dia CPVC pipe | 50 | Mtr | |
210 | 212 | 25mm dia CPVC pipe | 30 | Mtr | |
211 | 213 | 32mm dia CPVC pipe | 35 | mtr | |
212 | 214 | 50mm dia CPVC pipe | 50 | mtr | |
213 | 215 | In first floor | |||
214 | 216 | 20mm dia CPVC pipe | 70 | Mtr | |
215 | 217 | 25mm dia CPVC pipe | 30 | Mtr | |
216 | 218 | 32mm dia CPVC pipe | 30 | mtr | |
217 | 219 | 40mm dia CPVC pipe | 40 | mtr | |
218 | 220 | In second floor | |||
219 | 221 | 20mm dia CPVC pipe | 70 | mtr | |
220 | 222 | 25mm dia CPVC pipe | 30 | mtr | |
221 | 223 | 32mm dia CPVC pipe | 25 | mtr | |
222 | 224 | 40mm dia CPVC pipe | 40 | mtr | |
223 | 225 | 50mm dia CPVC pipe | 130 | mtr | |
224 | 226 | Supplying all materials, labour,T&Pand providing and laying in trenches PVC ASTM pipes of the following nominal bore and pipe fittings including testing as per specification and direction of the Engineer in charge | |||
225 | 227 | 50mm dia PVC ASTM pipe | 80 | Mtr | |
226 | 228 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C pipes and fittings etc. all complete as per P.H. specification and direction of E.I.C. | |||
227 | 229 | In ground floor 250mm thick wall | 20 | Each | |
228 | 230 | In first floor 250mm thick wall | 42 | Each | |
229 | 231 | In second floor 250mm thick wall | 42 | Each | |
230 | 232 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. | |||
231 | 233 | In ground floor | 13 | Each | |
232 | 234 | In first floor | 13 | Each | |
233 | 235 | In second floor | 10 | Each | |
234 | 236 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C pipes and making good the damages as per direction of the E.I.C. | |||
235 | 237 | In ground floor | 80 | Mtr | |
236 | 238 | In first floor | 100 | Mtr | |
237 | 239 | In second floor | 100 | Mtr | |
238 | 240 | Supplying all materials, labour T&P and fitting and fixing brass/CP /PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. | |||
239 | 241 | 15 mm dia CP Bib cock (JaquarCON-CHR-037KN) | 5 | Each | |
240 | 242 | 15mm dia CP angle stop cock(Jaquar)CON-CHR-059KN | 65 | Each | |
241 | 243 | 20mm dia C.P.conseal stop cock(Jaquar)ALD-CHR-089 | 22 | Each | |
242 | 244 | 15mm dia cp two way bib cock(Jaquar )CON-CHR-041KN | 15 | Each | |
243 | 245 | 15mm dia sink cock(Jaquar )CON-CHR-347FKN | 4 | Each | |
244 | 246 | 15mm dia cp ejecto spray(Jaquar )ALD-CHR-593N | 15 | Each | |
245 | 247 | 25mm dia brass or gun metal fullway valve(Shakti Make) IS:778 - 1984 class-I | 20 | Each | |
246 | 248 | 32mm dia brass or gun metal fullway valve(Shakti Make) IS:778 - 1984 class-I | 10 | Each | |
247 | 249 | 40mm dia brass or gun metal fullway valve(Shakti Make) IS:778 - 1984 class-I | 10 | Each | |
248 | 250 | 50mm dia brass or gun metal fullway valve(Shakti Make) IS:778 - 1984 class-I | 5 | Each | |
249 | 251 | 15mm dia CP Long body Bib cock(Jaquar)CON-CHR-107KN | 24 | Each | |
250 | 252 | 15mm dia CP flange | 160 | Each | |
251 | 253 | 15mm dia CP extension piece | 160 | Each | |
252 | 254 | 125mm CP grating | 80 | Each | |
253 | 255 | Urinal flush valve(Jaquar)PRS-CHR-077 | 26 | Each | |
254 | 256 | Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) with CISTERN etc all complete as per specification and direction of the Engineer in charge. | |||
255 | 257 | E.W.C.with S/P trap(Parryware/Hindware/Somany/Cera) | 15 | Each | |
256 | 258 | Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge. | |||
257 | 259 | Half stall urinal (Parryware/Hindware/ Somany/Orient bell) | 26 | Each | |
258 | 260 | Cost of 15mm dia urinal spreader | 26 | Each | |
259 | 261 | 32mm dia CP dome waste | 26 | Each | |
260 | 262 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge | |||
261 | 263 | Fixing 580mmx440mm size Orissa pan (Parryware/Hindware/ Somany/Orient bell) | 5 | Each | |
262 | 264 | Supplying all materials,labour,T&P and providing Cubicle partition for urinal etc.all complete as per direction of the Engineer-in-charge.(Marino urinal partition) | 26 | Each | |
263 | 265 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge | |||
264 | 266 | 10 litres capacity PVC LL cistern (Slimline-white) | 20 | Each | |
265 | 267 | Construction of 20000 Liters RCC Over head Tank of Inside size- 6.00 X 3.00 X1.50m-0n the roof of Second floor | |||
266 | 268 | Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 (minimum cement content not less than 403 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement and shuttering.\nColumn- 6x0.25x0.25x0.75\nBeam- 2x(6.5+3.0)x0.25x0.50\nBase Slab - 1x6.50x3.50x0.15\nLong wall - 2x6.50x0.25x1.50\nShort wall - 2x3.0x0.25x1.50\nMiddle wall - 1x3.00x0.20x1.2\nTop Slab - 1x6.50x3.50x0.125\n\n\n\n\n | 16.76 | Cum | |
267 | 269 | Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. | 16.76 | Qtl | |
268 | 270 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. | |||
269 | 271 | RCC floor roof, chajja etc | 46.25 | sqm | |
270 | 272 | RCC Beam, Column, wall etc | 92.45 | sqm | |
271 | 273 | Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site. | 52.2 | sqm | |
272 | 274 | Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site. | |||
273 | 275 | Quantity same as item No-4 | 52.2 | sqm | |
274 | 276 | Providing fitting and fixing stainless steel ladder including fixing to wall necessary welding etc. complete | 60 | Kg | |
275 | 277 | Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge | 40 | Kg | |
276 | 278 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. | |||
277 | 279 | 110mm diameter U-PVC SWR pipes (Oriplast/Supreme/Ashirvad/SFMC make-type A) | 35 | Mtr | |
278 | 280 | 100mm dia CI hub less | 250 | Mtr | |
279 | 281 | 75mm dia CI hub less | 100 | Mtr | |
280 | 282 | 100mm dia C.I. double junction plain Cross- T | 12 | Each | |
281 | 283 | 100mm dia C.I. single junction plain- T | 14 | Each | |
282 | 284 | 100mm dia C.I. single junction plain- Y | 35 | Each | |
283 | 285 | 100mm dia C.I. single junction with door | 25 | Each | |
284 | 286 | 100mm dia C.I. plain bend | 25 | Each | |
285 | 287 | 75mm dia C.I. plain bend | 12 | Each | |
286 | 288 | 100mm dia C.I 'P' trap Hubless | 85 | Each | |
287 | 289 | 100mm dia C.I cowl | 8 | Each | |
288 | 290 | 100mm dia sheldede S/S coupling with EPDM rubber including nut & bolt | 25 | Each | |
289 | 291 | 75mm dia shieldede S/S coupling with EPDM rubber including nut & bolt | 20 | Each | |
290 | 292 | WC Connector long | 20 | Each | |
291 | 293 | MS clamp | 3 | Qntl | |
292 | 294 | 100mm dia C.I. plain bend 45D | 15 | Each | |
293 | 295 | Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer in charge. | |||
294 | 296 | 250mm to 375mm thick wall-In GF | 10 | Each | |
295 | 297 | 250mm to 375mm thick wall-In FF | 17 | Each | |
296 | 298 | 250mm to 375mm thick wall-In SF | 17 | Each | |
297 | 299 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge | |||
298 | 300 | 550x400mm Wash hand basin with Porcelain pedestal(Parryware/Hindwar/Somany/Orient bell) | 3 | Each | |
299 | 301 | Under counter basin(Hindware) No.10095 | 16 | Each | |
300 | 302 | Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge | |||
301 | 303 | 15mm dia CP revolving shower with 15mmx240mm long size CP shower arm (Jaquar)OHS-CHR-1789+SHA-CHR-487 | 17 | Each | |
302 | 304 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge. | |||
303 | 305 | Bevelled edge Mirror(600mmx450mm) | 3 | Each | |
304 | 306 | Bigsize mirror-16x0.60x0.75= | 7.2 | Sqm | |
305 | 307 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge | |||
306 | 308 | 25mmx600mm long CP towel rail(Jaquar AKP-CHR-35711P | 17 | Each | |
307 | 309 | CP towel ring(Jaquar )AKP-CHR-35721P | 19 | Each | |
308 | 310 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge | |||
309 | 311 | CP soap holder(Jaquar )AKP-CHR-35731P | 60 | Each | |
310 | 312 | Supplying all materials, labour, T&P and fitting & fixing stainless steel AISI 304 (18/8) kitchen sink with drain board as per IS 13983 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge | |||
311 | 313 | 600x450x200mm stainless steel kitchen sink- with drain board.(Jayana/Somany) | 4 | Each | |
312 | 314 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge. | 3 | Each | |
313 | 315 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating including watering, curing, cost ,conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge | |||
314 | 316 | Inside size 250mmx250mm | 6 | Each | |
315 | 317 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge | |||
316 | 318 | Inspection chamber Inside size 760mmx760mmx460mm | 6 | Each | |
317 | 319 | Sinking of 200mmx 150mm dia Tube well through DTH Rig. | |||
318 | 320 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only | |||
319 | 321 | Drilling of 200mm dia bore | |||
320 | 322 | 0 mtr to 50mtr | 50 | Mtr | |
321 | 323 | 46mtr to 120mtr | 57 | mtr | |
322 | 324 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. | |||
323 | 325 | Lowering of 200mm dia GI/P.V.C/MS casing pipes | |||
324 | 326 | 0 mtr to 50 mtrs | 50 | mtr | |
325 | 327 | Cost of 200mm dia P.V.C schedule-80 pipe | 50.6 | mtr | |
326 | 328 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge | |||
327 | 329 | By DTH/Rotary Rig | 1 | Each | |
328 | 330 | Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department). | |||
329 | 331 | Sanitary sealing upto 5mtrs below ground level. | 1 | each | |
330 | 332 | CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing. | 0.16 | cum | |
331 | 333 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. | |||
332 | 334 | 40mm dia brass or gun metal Non-return valve | 1 | Each | |
333 | 335 | Supplying submerssible pump with sqirrel cage induction type submersible type submerssible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034 - 2002 with following specifications | |||
334 | 336 | 2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm | 1 | Each | |
335 | 337 | DOL controll pannel | 1 | Each | |
336 | 338 | 4.00sqmm cable | 60 | Mtr | |
337 | 339 | 32mm dia steel short piece | 2 | Each | |
338 | 340 | Steel rope with cover | 60 | Each | |
339 | 341 | Well cap | 1 | Each | |
340 | 342 | 50mm size CI bracket | 2 | Each | |
341 | 343 | 25 mm C-PVC pipes(Supreme/Ashirvad) | 60 | Mtr | |
342 | 344 | Labour charges for lowering of subersible pumpset with pipes and cables etc.with testing and commissioning at site. | 1 | Job | |
343 | 345 | 30000 Ltrs.Capacity Under Ground Reservier. | |||
344 | 346 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. | |||
345 | 347 | 6.00 x 4.00 x 1.50 =36.00 | 18.37 | cum | |
346 | 348 | Initial lift - | 9.6 | cum | |
347 | 349 | Excavation of foundation in laterite rock or any hard rock (other than granite) including dressing and leveling the bed and depositing the soil as per specification approved by the Department. | |||
348 | 350 | 6.00 x 4.00 x 1.50 =36.00 | 9.6 | cum | |
349 | 351 | Supplying all materials, labour, T&P and filling in foundaton and plinth with sand well watered and rammed including conveyeance of all materials to worksite,payment of royalty, taxes etc all complete as per direction of the Engineer in charge. | |||
350 | 352 | 6.00x4.00x0.15=3.60 | 3.6 | Cum | |
351 | 353 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site. | |||
352 | 354 | 6.00x4.00x0.15=3.60 | 3.6 | Cum | |
353 | 355 | Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete. | |||
354 | 356 | R.C.C floor , walls and roof slabs \n6.00x4.00x0.20 = 4.80 cum\n2x (5.40+3.00)x0.20x2.00= 6.72 cum\n5.40x3.40x0.13 = 2.39 cum\n5.40x3.40x0.13 = 2.39 cum | 13.91 | Cum | |
355 | 357 | Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. | |||
356 | 358 | 1.00 qtl per cum | 13.9 | Qtl. | |
357 | 359 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. | |||
358 | 360 | RCC Walls\n2x(5.40+3.40)x2.30=40.48\n2x(5.00+3.00)x2.00=32.00 | 72.48 | sqm. | |
359 | 361 | RCC Slab\n5.00x3.00=15.00 | 15 | sqm. | |
360 | 362 | Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:3) including watering,curring and conveyance of all materials to site.\nInside/outside portion\n2x(5.00+3.00)x2.00=32.00\n5.00x3.00=15.00\n2x(5.40+3.40)x2.30=40.48\n5.40x3.40=18.36 | 105.84 | sqm. | |
361 | 363 | Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site. | 47 | sqm. | |
362 | 364 | Supplying all materials, labour, T&P and futting and fixing 20mm dia MS/CI step iron including supply of necessary C.C(1:2:4) for fixing etc complete as per P.H.D. specification. | 8 | each | |
363 | 365 | Supplying all materials, labour, T&P and providing granite tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge | |||
364 | 366 | Ground floor | 12.38 | sqm | |
365 | 367 | First floor | 7.66 | sqm | |
366 | 368 | Second floor | 7.66 | sqm | |
367 | 369 | Providing edge moulding to 20 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and ,es of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. | |||
368 | 370 | Ground floor | 39.63 | Mtr | |
369 | 371 | First floor | 31.76 | Mtr | |
370 | 372 | Second floor | 31.76 | Mtr | |
371 | 373 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge(Size.30cmx30cm of Kajaria/Somany/Johnson/Orient bell to be pre-approved by the Engineer-in-charge. | |||
372 | 374 | Ground floor | 88.19 | sqm | |
373 | 375 | First floor | 88.19 | sqm | |
374 | 376 | Second floor | 88.19 | sqm | |
375 | 377 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles/ granite tiles/chequered tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(Size.45x30cm of Kajaria/Somany/Johnson/Orient bell to be pre-approved by the Engineer-in-charge. | |||
376 | 378 | Ground floor | 222.25 | sqm | |
377 | 379 | First floor | 212.59 | sqm | |
378 | 380 | Second floor | 212.59 | sqm | |
379 | 381 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. | |||
380 | 382 | Ground floor | 14.28 | sqm | |
381 | 383 | First floor | 26.78 | sqm | |
382 | 384 | Second floor | 26.78 | sqm | |
383 | 385 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge | |||
384 | 386 | Ground floor | 40.4 | Mtr | |
385 | 387 | First floor | 75.75 | Mtr | |
386 | 388 | Second floor | 75.75 | Mtr | |
387 | 389 | Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost,conveyance,taxes,royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge. | |||
388 | 390 | First floor | 128.83 | sqm | |
389 | 391 | Second floor | 128.83 | sqm | |
390 | 392 | 12 mm thick cement plaster (1:4) over brick work with cement punning for skirting. | |||
391 | 393 | First floor | 128.83 | sqm | |
392 | 394 | Second foor | 128.83 | sqm | |
393 | 395 | Supplying all materials, labour, T&P and filling in sunken floor in toilets with cinter (light weight slag) well watered and rammed include conveyance of all materials to worksite payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | |||
394 | 396 | First floor | 28.86 | cum | |
395 | 397 | Second floor | 28.86 | cum | |
396 | 398 | Supplying, fitting and fixing of M.S grills, Grill window ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.) | |||
397 | 399 | Ground floor | 216 | KG | |
398 | 400 | First floor | 216 | KG | |
399 | 401 | Second floor | 216 | KG | |
400 | 402 | painting 2 coat with any approved paint on new wood work/iron work all complete as per specification and direction of the Engineer in charge | |||
401 | 403 | Ground floor | 7.2 | SQM | |
402 | 404 | First floor | 7.2 | SQM | |
403 | 405 | Second floor | 7.2 | SQM | |
404 | 406 | Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the Engineer in charge | |||
405 | 407 | Ground floor | 7.2 | SQM | |
406 | 408 | First floor | 7.2 | SQM | |
407 | 409 | Second floor | 7.2 | SQM | |
408 | 410 | Girls Hostel | |||
409 | 411 | Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to C-PVC (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge | |||
410 | 412 | ground floor to 2nd floor | |||
411 | 413 | 20mm dia CPVC pipe | 50 | Mtr | |
412 | 414 | 25mm dia CPVC pipe | 30 | Mtr | |
413 | 415 | 32mm dia CPVC pipe | 35 | mtr | |
414 | 416 | 50mm dia CPVC pipe | 50 | mtr | |
415 | 417 | In first floor | |||
416 | 418 | 20mm dia CPVC pipe | 70 | Mtr | |
417 | 419 | 25mm dia CPVC pipe | 30 | Mtr | |
418 | 420 | 32mm dia CPVC pipe | 30 | mtr | |
419 | 421 | 40mm dia CPVC pipe | 40 | mtr | |
420 | 422 | In second floor | |||
421 | 423 | 20mm dia CPVC pipe | 70 | mtr | |
422 | 424 | 25mm dia CPVC pipe | 30 | mtr | |
423 | 425 | 32mm dia CPVC pipe | 25 | mtr | |
424 | 426 | 40mm dia CPVC pipe | 40 | mtr | |
425 | 427 | 50mm dia CPVC pipe | 130 | mtr | |
426 | 428 | Supplying all materials, labour,T&Pand providing and laying in trenches C-PVC pipes of the following nominal bore and pipe fittings including testing as per specification and direction of the Engineer in charge | |||
427 | 429 | 50mm dia CPVC pipe | 80 | Mtr | |
428 | 430 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C pipes and fittings etc. all complete as per P.H. specification and direction of E.I.C. | |||
429 | 431 | In ground floor 250mm thick wall | 20 | Each | |
430 | 432 | In first floor 250mm thick wall | 42 | Each | |
431 | 433 | In second floor 250mm thick wall | 42 | Each | |
432 | 434 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. | |||
433 | 435 | In ground floor | 13 | Each | |
434 | 436 | In first floor | 13 | Each | |
435 | 437 | In second floor | 10 | Each | |
436 | 438 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C pipes and making good the damages as per direction of the E.I.C. | |||
437 | 439 | In ground floor | 80 | Mtr | |
438 | 440 | In first floor | 100 | Mtr | |
439 | 441 | In second floor | 100 | Mtr | |
440 | 442 | Supplying all materials, labour T&P and fitting and fixing brass/CP /PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. | |||
441 | 443 | 15 mm dia CP Bib cock (JaquarCON-CHR-037KN) | 7 | Each | |
442 | 444 | 15mm dia CP angle stop cock(Jaquar)CON-CHR-059KN | 65 | Each | |
443 | 445 | 20mm dia C.P.conseal stop cock(Jaquar)ALD-CHR-089 | 28 | Each | |
444 | 446 | 15mm dia cp two way bib cock(Jaquar )CON-CHR-041KN | 13 | Each | |
445 | 447 | 15mm dia sink cock(Jaquar )CON-CHR-347FKN | 4 | Each | |
446 | 448 | 15mm dia cp ejecto spray(Jaquar )ALD-CHR-593N | 13 | Each | |
447 | 449 | 25mm dia brass or gun metal fullway valve(Shakti Make) IS:778 - 1984 class-I | 20 | Each | |
448 | 450 | 32mm dia brass or gun metal fullway valve(Shakti Make) IS:778 - 1984 class-I | 10 | Each | |
449 | 451 | 40mm dia brass or gun metal fullway valve(Shakti Make) IS:778 - 1984 class-I | 10 | Each | |
450 | 452 | 50mm dia brass or gun metal fullway valve(Shakti Make) IS:778 - 1984 class-I | 5 | Each | |
451 | 453 | 15mm dia CP Long body Bib cock(Jaquar)CON-CHR-107KN | 24 | Each | |
452 | 454 | 15mm dia CP flange | 160 | Each | |
453 | 455 | 15mm dia CP extension piece | 160 | Each | |
454 | 456 | 125mm CP grating | 80 | Each | |
455 | 457 | Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) with CISTERN etc all complete as per specification and direction of the Engineer in charge. | |||
456 | 458 | E.W.C.with S/P trap(Parryware/Hindware/Somany/Cera) | 13 | Each | |
457 | 459 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge | |||
458 | 460 | Fixing 580mmx440mm size Orissa pan (Parryware/Hindware/ Somany/Orient bell) | 7 | Each | |
459 | 461 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge | |||
460 | 462 | 10 litres capacity PVC LL cistern (Slimline-white) | 20 | Each | |
461 | 463 | Construction of 20000 Liters RCC Over head Tank of Inside size- 6.00 X 3.00 X1.50m-0n the roof of Second floor | |||
462 | 464 | Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 (minimum cement content not less than 403 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement and shuttering.Column- 6x0.25x0.25x0.75\nBeam- 2x(6.5+3.0)x0.25x0.50\nBase Slab - 1x6.50x3.50x0.15\nLong wall - 2x6.50x0.25x1.50\nShort wall - 2x3.0x0.25x1.50\nMiddle wall - 1x3.00x0.20x1.2\nTop Slab - 1x6.50x3.50x0.125\n | 16.76 | Cum | |
463 | 465 | Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. | |||
464 | 466 | @ 100 kg / cum = | 16.76 | Qtl | |
465 | 467 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. | |||
466 | 468 | RCC floor roof, chajja etc | 46.25 | sqm | |
467 | 469 | RCC Beam, Column, wall etc | 92.45 | sqm | |
468 | 470 | Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site. | 52.2 | sqm | |
469 | 471 | Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site. | 52.2 | sqm | |
470 | 472 | Providing fitting and fixing stainless steel ladder including fixing to wall necessary welding etc. complete | 60 | Kg | |
471 | 473 | Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge | 40 | Kg | |
472 | 474 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. | |||
473 | 475 | 110mm diameter U-PVC SWR pipes (Oriplast/Supreme/Ashirvad/SFMC make-type A) | 35 | Mtr | |
474 | 476 | 100mm dia CI hub less | 250 | Mtr | |
475 | 477 | 75mm dia CI hub less | 100 | Mtr | |
476 | 478 | 100mm dia C.I. double junction plain Cross- T | 12 | Each | |
477 | 479 | 100mm dia C.I. single junction plain- T | 14 | Each | |
478 | 480 | 100mm dia C.I. single junction plain- Y | 35 | Each | |
479 | 481 | 100mm dia C.I. single junction with door | 25 | Each | |
480 | 482 | 100mm dia C.I. plain bend | 25 | Each | |
481 | 483 | 75mm dia C.I. plain bend | 12 | Each | |
482 | 484 | 100mm dia C.I 'P' trap Hubless | 85 | Each | |
483 | 485 | 100mm dia C.I cowl | 8 | Each | |
484 | 486 | 100mm dia sheldede S/S coupling with EPDM rubber including nut & bolt | 25 | Each | |
485 | 487 | 75mm dia shieldede S/S coupling with EPDM rubber including nut & bolt | 20 | Each | |
486 | 488 | WC Connector long | 20 | Each | |
487 | 489 | MS clamp | 3 | Qntl | |
488 | 490 | 100mm dia C.I. plain bend 45D | 15 | Each | |
489 | 491 | Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer in charge. | |||
490 | 492 | 250mm to 375mm thick wall-In GF | 10 | Each | |
491 | 493 | 250mm to 375mm thick wall-In FF | 17 | Each | |
492 | 494 | 250mm to 375mm thick wall-In SF | 17 | Each | |
493 | 495 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge | |||
494 | 496 | 550x400mm Wash hand basin with Porcelain pedestal(Parryware/Hindwar/Somany/Orient bell) | 3 | Each | |
495 | 497 | Under counter basin(Hindware) No.10095 | 16 | Each | |
496 | 498 | Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge | |||
497 | 499 | Fixing of squatting urinal(Parryware/Hindwar/Somany/Orient bell) | 6 | Each | |
498 | 500 | Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge | |||
499 | 501 | 15mm dia CP revolving shower with 15mmx240mm long size CP shower arm (Jaquar)OHS-CHR-1789+SHA-CHR-487 | 17 | Each | |
500 | 502 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge. | |||
501 | 503 | Bevelled edge Mirror(600mmx450mm) | 3 | Each | |
502 | 504 | Bigsize mirror-16x0.60x0.75= | 7.2 | Sqm | |
503 | 505 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge | |||
504 | 506 | 25mmx600mm long CP towel rail(Jaquar AKP-CHR-35711P | 17 | Each | |
505 | 507 | CP towel ring(Jaquar )AKP-CHR-35721P | 19 | Each | |
506 | 508 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge | |||
507 | 509 | CP soap holder(Jaquar )AKP-CHR-35731P | 60 | Each | |
508 | 510 | Supplying all materials, labour, T&P and fitting & fixing stainless steel AISI 304 (18/8) kitchen sink with drain board as per IS 13983 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge | |||
509 | 511 | 600x450x200mm stainless steel kitchen sink- with drain board.(Jayana/Somany) | 4 | Each | |
510 | 512 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge. | 3 | Each | |
511 | 513 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating including watering, curing, cost ,conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge | |||
512 | 514 | Inside size 250mmx250mm | 6 | Each | |
513 | 515 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge | |||
514 | 516 | Inspection chamber Inside size 760mmx760mmx460mm | 6 | Each | |
515 | 517 | Sinking of 200mmx 150mm dia Tube well through DTH Rig. | |||
516 | 518 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only | |||
517 | 519 | Drilling of 200mm dia bore | |||
518 | 520 | 0 mtr to 50mtr | 50 | Mtr | |
519 | 521 | 46mtr to 120mtr | 57 | mtr | |
520 | 522 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. | |||
521 | 523 | Lowering of 200mm dia GI/P.V.C/MS casing pipes | |||
522 | 524 | 0 mtr to 50 mtrs | 50 | mtr | |
523 | 525 | Cost of 200mm dia P.V.C schedule-80 pipe | 50.6 | mtr | |
524 | 526 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge | |||
525 | 527 | By DTH/Rotary Rig | 1 | Each | |
526 | 528 | Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department). | |||
527 | 529 | Sanitary sealing upto 5mtrs below ground level. | 1 | each | |
528 | 530 | CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing. | 0.16 | cum | |
529 | 531 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. | |||
530 | 532 | 40mm dia brass or gun metal Non-return valve | 1 | Each | |
531 | 533 | Supplying submerssible pump with sqirrel cage induction type submersible type submerssible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034 - 2002 with following specifications | |||
532 | 534 | 2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm | 1 | Each | |
533 | 535 | DOL controll pannel | 1 | Each | |
534 | 536 | 4.00sqmm cable | 60 | Mtr | |
535 | 537 | 32mm dia steel short piece | 2 | Each | |
536 | 538 | Steel rope with cover | 60 | Each | |
537 | 539 | Well cap | 1 | Each | |
538 | 540 | 50mm size CI bracket | 2 | Each | |
539 | 541 | 25 mm C-PVC pipes(Supreme/Ashirvad) | 60 | Mtr | |
540 | 542 | Labour charges for lowering of subersible pumpset with pipes and cables etc.with testing and commissioning at site. | 1 | JOB | |
541 | 543 | 30000 Ltrs.Capacity Under Ground Reservier. | |||
542 | 544 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.\n6.00 x 4.00 x 1.50 =36.00 | 18.37 | cum | |
543 | 545 | Initial lift - | 9.6 | cum | |
544 | 546 | Excavation of foundation in laterite rock or any hard rock (other than granite) including dressing and leveling the bed and depositing the soil as per specification approved by the Department.\n 6.00 x 4.00 x 0.40 =9.6 | 9.6 | cum | |
545 | 547 | Supplying all materials, labour, T&P and filling in foundaton and plinth with sand well watered and rammed including conveyeance of all materials to worksite,payment of royalty, taxes etc all complete as per direction of the Engineer in charge.\n6.00x4.00x0.15=3.60 | 3.6 | Cum | |
546 | 548 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site.\n6.00x4.00x0.15=3.60 | 3.6 | Cum | |
547 | 549 | Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete. | |||
548 | 550 | R.C.C floor , walls and roof slabs \n6.00x4.00x0.20 = 4.80 cum\n2x (5.40+3.00)x0.20x2.00= 6.72 cum\n5.40x3.40x0.13 = 2.39 cum\n5.40x3.40x0.13 = 2.39 cum | 13.91 | Cum | |
549 | 551 | Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.\n1.00 qtl per cum | 13.9 | Qtl. | |
550 | 552 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. | |||
551 | 553 | RCC Walls\n2x(5.40+3.40)x2.30=40.48\n2x(5.00+3.00)x2.00=32.00 | 72.48 | sqm. | |
552 | 554 | RCC Slab\n5.00x3.00=15.00 | 15 | sqm. | |
553 | 555 | Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:3) including watering,curring and conveyance of all materials to site.\nInside/outside portion\n2x(5.00+3.00)x2.00=32.00\n5.00x3.00=15.00\n2x(5.40+3.40)x2.30=40.48\n5.40x3.40=18.36 | 105.84 | sqm. | |
554 | 556 | Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site. | 47 | sqm. | |
555 | 557 | Supplying all materials, labour, T&P and futting and fixing 20mm dia MS/CI step iron including supply of necessary C.C(1:2:4) for fixing etc complete as per P.H.D. specification. | 8 | each | |
556 | 558 | Supplying all materials, labour, T&P and providing granite tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge | |||
557 | 559 | Ground floor | 12.38 | sqm | |
558 | 560 | First floor | 7.66 | sqm | |
559 | 561 | Second floor | 7.66 | sqm | |
560 | 562 | Providing edge moulding to 20 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and ,es of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. | |||
561 | 563 | Ground floor | 39.63 | Mtr | |
562 | 564 | First floor | 31.76 | Mtr | |
563 | 565 | Second floor | 31.76 | Mtr | |
564 | 566 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge(Size.30cmx30cm of Kajaria/Somany/Johnson/Orient bell to be pre-approved by the Engineer-in-charge. | |||
565 | 567 | Ground floor | 88.19 | sqm | |
566 | 568 | First floor | 88.19 | sqm | |
567 | 569 | Second floor | 88.19 | sqm | |
568 | 570 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles/ granite tiles/chequered tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(Size.45x30cm of Kajaria/Somany/Johnson/Orient bell to be pre-approved by the Engineer-in-charge. | |||
569 | 571 | Ground floor | 222.25 | sqm | |
570 | 572 | First floor | 212.59 | sqm | |
571 | 573 | Second floor | 212.59 | sqm | |
572 | 574 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. | |||
573 | 575 | Ground floor | 14.28 | sqm | |
574 | 576 | First floor | 26.78 | sqm | |
575 | 577 | Second floor | 26.78 | sqm | |
576 | 578 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge | |||
577 | 579 | Ground floor | 40.4 | Mtr | |
578 | 580 | First floor | 75.75 | Mtr | |
579 | 581 | Second floor | 75.75 | Mtr | |
580 | 582 | Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost,conveyance,taxes,royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge. | |||
581 | 583 | First floor | 128.83 | sqm | |
582 | 584 | Second floor | 128.83 | sqm | |
583 | 585 | 12 mm thick cement plaster (1:4) over brick work with cement punning for skirting. | |||
584 | 586 | First floor | 128.83 | sqm | |
585 | 587 | Second foor | 128.83 | sqm | |
586 | 588 | Supplying all materials, labour, T&P and filling in sunken floor in toilets with cinter (light weight slag) well watered and rammed include conveyance of all materials to worksite payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | |||
587 | 589 | First floor | 28.86 | cum | |
588 | 590 | Second floor | 28.86 | cum | |
589 | 591 | Supplying, fitting and fixing of M.S grills, Grill window ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.) | |||
590 | 592 | Ground floor | 216 | KG | |
591 | 593 | First floor | 216 | KG | |
592 | 594 | Second floor | 216 | KG | |
593 | 595 | painting 2 coat with any approved paint on new wood work/iron work all complete as per specification and direction of the Engineer in charge | |||
594 | 596 | Ground floor | 7.2 | SQM | |
595 | 597 | First floor | 7.2 | SQM | |
596 | 598 | Second floor | 7.2 | SQM | |
597 | 599 | Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the Engineer in charge | |||
598 | 600 | Ground floor | 7.2 | SQM | |
599 | 601 | First floor | 7.2 | SQM | |
600 | 602 | Second floor | 7.2 | SQM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail