Military Engineer Services-MES has published Repairs Polishing Painting Of Wooden And Steel Furniture For Certain Otm Md Accn And Officers Mess Of Cqa Icv Under Age I Fy Eddumailaram. Submission Date for this Tender is 27-07-2020. Painting Tenders in eddumailaram Telangana. Bidders can get complete Tender details and download the document.
Name of Work : REPAIRS/POLISHING/PAINTING OF WOODEN AND STEEL FURNITURE FOR CERTAIN OTM, MD ACCN AND OFFICERS MESS OF CQA (ICV) UNDER AGE (I) FY EDDUMAILARAM | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Repair/replacement of GI Charpoy carefully without disturbing the adjoining parts and S&F new components / weaving / retaping in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part -in-tact and painting / polishing the disturbed portion, as applicable as per Drg No FD - 220) Note : Work will be executed at BSO's Furniture Yard as directed by Engineer-in-Charge | |||
2 | 1.01 | Long rail as per drg | 20 | Each | |
3 | 1.02 | Short rail as per drg | 20 | Each | |
4 | 1.03 | Legs as per drg | 32 | Each | |
5 | 1.04 | MS Check nut as per drg | 32 | Each | |
6 | 1.05 | 3-way elbow as per drg | 42 | Each | |
7 | 1.06 | Cutting of retrived long rails into short rails and threading at both ends as required as per drg and fixing in repair works | 20 | Each | |
8 | 1.07 | Cutting of retrived short rails into legs and threading at one end with MNF clamp suitable for 19mm dia conduit pipe 3mm base plate welded at bottom and fixed in repairs as required as per drg | 18 | Each | |
9 | 1.08 | Supplying and fixing of 12mm thick commercial plywood size 2mtr x 0.92 mtr with 4mm thick Teak wood edging all around of plywoods to be fixed with 75mm long GI round headed bolt and nut with washers of 6mm bores on mild steel flat iron stiffner complete all as specified and directed by Engineer-In-Charge. Make of plywood:Kitply/ Century/ Omega/ Green ply. | 25 | Each | |
10 | 2 | All as per Item No. 1 above, but for Bed Plywood Hard (FD-213/ 246) | |||
11 | 2.01 | Long rail as per drg | 12 | Each | |
12 | 2.02 | Short rail as per drg | 12 | Each | |
13 | 2.03 | Foot Board as per drg | 10 | Each | |
14 | 2.04 | Head Board as per drg | 8 | Each | |
15 | 2.05 | Stiffners as per drg | 30 | Each | |
16 | 2.06 | 12 mm Plywood Top ( ISI Mark) for Bed Hard | 25 | Each | |
17 | 3 | Chair Easy (FD- 229) | |||
18 | 3.01 | Front or rear legs for chair easy | 25 | Each | |
19 | 3.02 | Arm Rest for chair easy | 15 | Each | |
20 | 3.03 | Seating frame members for easy chair | 12 | Each | |
21 | 4 | Repair/replacement of Peg Table carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part -in-tact and painting / polishing the disturbed portion, as applicable as per FD-236 & FD-384 | |||
22 | 4.01 | Table Top 18mm thick prelaminated particle board of approved / existing shade as directed by Engineer-in-charge | 30 | Each | |
23 | 4.02 | Legs as per drg | 80 | Each | |
24 | 4.03 | Short rail as per drg | 40 | Each | |
25 | 4.04 | Long rail as per drg | 40 | Each | |
26 | 5 | Repair/replacement of Table Bed Side carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part -in-tact and painting / polishing the disturbed portion, as applicable as per FD-276/248 28 | |||
27 | 5.01 | Back ply as per drg | 15 | Each | |
28 | 5.02 | Shelf with 12 mm thick prelaminated partical board as per drg | 30 | Each | |
29 | 5.03 | Side plank with 18mm thick prelaminated partical board as per drg | 30 | Each | |
30 | 5.04 | Bottom frame with suporting Legs all as per drg | 15 | Each | |
31 | 6 | Repair/replacement of Table Centre carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part -in-tact and painting / polishing the disturbed portion, as applicable as per (FD-274 / 29) | |||
32 | 6.01 | Table Top 18mm thick prelaminated particle board of approved / existing shade as directed by Engineer-in-charge | 10 | Nos | |
33 | 6.02 | Leg (60 x 30 mm) as per drg | 24 | Nos | |
34 | 6.03 | Top rail (20 x 50 mm) as per drg | 12 | Nos | |
35 | 6.04 | stiffener (50 x 20 mm) as per drg | 24 | Nos | |
36 | 7 | Repair/Re-canning of Chair Varandah carefully without disturbing the adjoining parts as per FD-19 (M) | |||
37 | 7.01 | Removing of old caning from the steel frame and making the frame by means of welding wherever required to bring its in original shape as per drg. | 20 | Nos | |
38 | 7.02 | De-rusting/cleaning the iron frame to smooth surface and painting all steel surface with two coat of synthetic enamelled white paint over a coat of red oxide primer to bring the surface with glossy finish and re-caning the same with 4mm white plastic cane Make-Ajoy/Primer oval shape as approved by Asst Garrison Engineer as per drg and providing the new rubber shoe complete. | 20 | Nos | |
39 | 8.01 | Removing unserviceable seat frame of chair tubular steel with arms and supply and fix new seat frame made of teak wood, black painted, duly plastic canned in Godrej pattern with plastic cane not less than 2.0mm width and 0.4mm thick and borders with 4mm wide and 0.60mm thick plastic cane and fixed with screws 4 Nos and nuts to chair frame complete all as per drawing and as specified. | 50 | Nos | |
40 | 8.02 | All as per item No 8.01 herein before but back frame | 50 | Nos | |
41 | 8.03 | Removing unserviceable seat frame of chair tubular steel without arms and supply and fix new seat frame made of teak wood, black painted duly plastic canned in "Godrej" pattern with plastic cane not less than 2.0mm width and 0.40mm thick and broders with 4mm wide and 0.60mm thick plastic cane and fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing and as specified. | 45 | Nos | |
42 | 8.04 | All as per item No 8.03 herein before but back frame of chair steel tubular without arms | 45 | Nos | |
43 | 9 | Repair/Re-canning of Chair Dinningcarefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part -in-tact and painting / polishing the disturbed portion, as applicable as per drawing FD- 228/279 | |||
44 | 9.01 | Front Legs | 20 | Nos | |
45 | 9.02 | Rear Legs | 20 | Nos | |
46 | 9.03 | Front rail of seat frame (Hole should be 12.5mm apart of each other) | 10 | Nos | |
47 | 9.04 | Side Rail(Ditto complete) | 10 | Nos | |
48 | 9.05 | Back Rail(Ditto complete) | 10 | Nos | |
49 | 9.06 | Short stiffener | 80 | Nos | |
50 | 9.07 | Back rest batten | 20 | Nos | |
51 | 9.08 | Recanning with 2.00mm thick new white plastic caneoval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approval by AGE and providing new hard rubber shoes on legs. | 15 | Nos | |
52 | 10 | Removal of following existing unserviceable steel components of Table Office Officer furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing & welding as per drawing No FD-84/1003. Note : Work will be executed at BSO's Furniture Yard as directed by Engineer-in-Charge\n | |||
53 | 10.01 | Legs, 16 guage as per drg | 6 | Nos | |
54 | 10.02 | Replacement of lock of drawer | 6 | Nos | |
55 | 10.03 | Repairs to Drawer include tinkering/denting, painting, welding, etc. all as shown, as specified & as directed | 20 | Nos | |
56 | 10.04 | Shoes all as per drg | 30 | Nos | |
57 | 10.05 | Welding the joints of legs / square tube including painting the welded partsto match with existing | 25 | Nos | |
58 | 10.06 | Table top with 18mm thick pre-laminated particle board exterior grade with TW beeding of approved colour all as per drg | 50 | Nos | |
59 | 11 | Removal of following existing unserviceable steel components of Table Office Clerk/Typist Steel furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing & welding as per drawing No FD-84(m) / 381 /1004 | |||
60 | 11.01 | Legs, 16 guage as per drg | 10 | Nos | |
61 | 11.02 | Replacement of lock of drawer | 20 | Nos | |
62 | 11.03 | Repairs to Drawer include tinkering/denting, painting, welding, etc. all as shown, as specified & as directed | 26 | Nos | |
63 | 11.04 | Stiffeners as per drg | 12 | Nos | |
64 | 11.05 | Shoes all as per drg | 16 | Nos | |
65 | 11.06 | Welding the joints of legs / square tube including painting the welded partsto match with existing | 23 | Nos | |
66 | 11.07 | Table top with 18mm thick pre-laminated particle board exterior grade with TW beeding all as per drg | 45 | Nos | |
67 | 12 | Removal of following existing unserviceable steel components of Table Steel with Drawers 900X600X760 ( 3' x 2' ) carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing & welding as per drawing No FD-1009 | |||
68 | 12.01 | Top of Table with 18mm thick pre-laminated particle board of exterior grade with TW beeding | 18 | Nos | |
69 | 12.02 | Locks as per drg | 16 | Nos | |
70 | 12.03 | Legs as per drg | 24 | Nos | |
71 | 12.04 | Stiffeners as per drg | 32 | Nos | |
72 | 12.05 | Repair to drawer all as specified & as shown on drg | 8 | Nos | |
73 | 13 | Removal of following existing unserviceable components of Table dining 1520 X 860 X 760 ( 6 or 8 pers ) carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing & welding wherever required | |||
74 | 13.01 | Table Top 18mm thick prelaminated particle board of approved / existing shade as directed by Engineer-in-charge | 18 | Nos | |
75 | 13.02 | Stiffeners as per drg | 25 | Nos | |
76 | 13.03 | Legs (75 x 40 mm) as per drg | 25 | Nos | |
77 | 13.04 | Short Rail (25 x 100 mm) as per drg | 10 | Nos | |
78 | 13.05 | Long Rail (100 x 25 mm) as per drg | 15 | Nos | |
79 | 13.06 | Fixing of triangular wooden strip at two joins of legs in the table | 40 | Nos | |
80 | 14 | Removal of following existing unserviceable steel components of Almirah Large Steel carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing & welding as per drawing No FD-114 | |||
81 | 14.01 | 3-Way locking system for almirah large as per drg | 25 | Nos | |
82 | 14.02 | Brass lock as per drg | 30 | Nos | |
83 | 14.03 | Handle as per drg | 40 | Nos | |
84 | 14.04 | Leg as per drg | 25 | Nos | |
85 | 14.05 | Repairs to door as specified including replacement of hinges | 30 | Nos | |
86 | 14.06 | Repair to existing shelf including welding | 40 | Nos | |
87 | 15 | Removal of following existing unserviceable components of Table Dressing Gents furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing & welding as per drawing No FD-230 | |||
88 | 15.01 | Labour for removing the existing brocken or \nunserviceble mirror including preparation, S/F new mirror of 8 mm thick and 6mm plywood back including two coats of french polish to all parts complete all as specified and directed | 10 | Each | |
89 | 15.02 | Drawers | 30 | Each | |
90 | 15.03 | Knobs | 30 | Each | |
91 | 15.04 | supply only Mirror 8 mm thick | 10 | Each | |
92 | 16 | Removal of following existing unserviceable components of Sofa Set 5 Seater carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing & welding as per drawing No FD-281/373 | |||
93 | 16.01 | Wooden battens as per drg | 50 | Nos | |
94 | 16.02 | wooden frame for back as per drg | 7 | Nos | |
95 | 16.03 | Wooden rail to support back frame as per drg | 8 | Nos | |
96 | 16.04 | Wooden legs as per drg | 20 | Nos | |
97 | 16.05 | Wooden arm out as per drg | 30 | Nos | |
98 | 16.06 | Wooden bearers as per drg | 20 | Nos | |
99 | 16.07 | Replacement of worn out synthetic foam with new one with cover of leatherised rexine of approved shade | 30 | Nos | |
100 | 16.08 | Replacement of worn out synthetic foam with new one with cover of leatherised rexine of approved shade for visitors chair writing with cushion | 30 | Nos | |
101 | 17 | Removal of following existing unserviceable components of Almirah Medium / Small Steel carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing & welding as per drawing No FD-350 | |||
102 | 17.01 | 3-Way locking system as per drg | 12 | Nos | |
103 | 17.02 | Brass lock as per drg | 10 | Nos | |
104 | 17.03 | Handle as per drg | 20 | Nos | |
105 | 17.04 | Leg as per drg | 10 | Nos | |
106 | 17.05 | Repairs to door as specified including replacement of hinges | 15 | Nos | |
107 | 17.06 | Repair to existing shelf including welding | 10 | Nos | |
108 | 18 | M&L for french polishing of one coat to the following furniture articles all are of MES pattern viz F/DB/FD series or Similar items incl applying wax for depressed surface before polishing all as specified and shown on drgs and directed by Engineer-in-Charge. Note : Work will be executed where the furniture exist in different User Units at OTM, Md Accn under the jurisdiction of AGE (I) Fy , Edumailaram including BSO's Furniture Yard as directed by Engineer-in-Charge. | |||
109 | 18.01 | Chair Dinning (Drg No FD-244/13) | 35 | Each | |
110 | 18.02 | Chair easy (Drg No FD-358) | 15 | Each | |
111 | 18.03 | Table dining 6 persons (Drg No FD-239) | 10 | Each | |
112 | 18.04 | Table 900x600mm with/ with out drawer (Drg No FD-224 /231) | 8 | Each | |
113 | 18.05 | Table bed side (Drg No FD-28/ 248/ 27)6 | 31 | Each | |
114 | 18.06 | Table centre (Drg No FD-235/375) | 17 | Each | |
115 | 18.07 | Peg table (Drg No FD-236/384) | 50 | Each | |
116 | 18.08 | Table writing/Study (Drg No FD-275 /249) | 5 | Each | |
117 | 18.09 | Teapoy (Drg No FD-232) | 17 | Each | |
118 | 19 | M&L for painting one coat of synthetic enamel paint approved shade, both internally & externally to the following furniture articles, all are of MES pattern viz F/FD/DB series or Similar items including removing of dents, applying putty to level the surface before painting, all as specified and shown on drgs and directed by Engineer-in-Charge. Note : Work will be executed where the furniture exist in different User Units at OTM, Md Accn under the jurisdiction of AGE (I) Fy , Edumailaram including BSO's Furniture Yard as directed by Engineer-in-Charge . | |||
119 | 19.01 | Almirah Steel Medium/Small (Drg No FD -350) | 120 | Each | |
120 | 19.02 | Almirah Steel Large (Drg No FD -114) | 95 | Each | |
121 | 19.03 | Chair steel Tubular with arms (Drg No FD 75M,86) | 100 | Each | |
122 | 19.04 | Chair steel Tubular without arms (Drg No FD 18,75) | 60 | Each | |
123 | 19.05 | Teapoy Verandah (Drg No FD 255,383) | 15 | Each | |
124 | 19.06 | Rack steel 5/7 shelves | 85 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail