Rural Development Department has published Pot Hole Filling To B . T . Surface Mathani Balewadi To Marathwadi Taluka Bordar Road Km 0/00 To 3/00 ( V . R 23 ) Tal Nagar Dist Ahmednagar. Submission Date for this Tender is 13-07-2020. Road Work Tenders in AHMEDNAGAR Maharashtra. Bidders can get complete Tender details and download the document.
Name of work :- Pot hole filling To B.T. Surface Mathani Balewadi To Marathwadi Taluka Bordar Road Km 0/00 to 3/00 ( V.R 23)Tal Nagar Dist Ahmednagar | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 2 | Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete. | 940 | Sqm | |
2 | 3 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. | 202.5 | Cum | |
3 | 4 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete | 202.5 | Cum | |
4 | 5 | Providing and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of specified grade @ 2 kg / sqm , spreading 12mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of specified grade of bitumen at the rate of 0.30 Kg Sqm. on existing bitumen surface. (VG-30 bulk bitumen rates are considered to arrive at rates) | 1957.5 | Sqm | |
5 | 6 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates) | 1350 | Sqm | |
6 | 7 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) | 1350 | Sqm | |
7 | 8 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) | 1350 | Sqm | |
8 | 9 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge | 1 | No | |
9 | 10 | Testing charges of Metal 60mm/40mm - Water Absorption, Specific Gravity,Impact Value /Crushing Value. | 1 | Test | |
10 | 11 | Testing charges of Metal 60mm/40mm - Sieve Analysis | 1 | Test | |
11 | 12 | Testing charges of Hard Murum - Liquid limit & plastic Limit. | 1 | Test | |
12 | 13 | Testing charges of BITUMEN - Penetration, Softening Point, Flash & Fire Point, Specific Gravity | 1 | Test | |
13 | 14 | Testing charges of BITUMEN -Extraction Test.( OGC) | 1 | Test |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail