}

Construction Of Air -Conditioned Bus Stand At Different Places In The District Of Paschim Bardhaman. . Location: Dharampur More, Nos.-1, ADDA OFFICE ASANSOL-West Bengal

Asansol Durgapur Development Authority -ADDA has published Construction Of Air -Conditioned Bus Stand At Different Places In The District Of Paschim Bardhaman. . Location: Dharampur More, Nos.-1. Submission Date for this Tender is 18-07-2020. Building Work Tenders in ADDA OFFICE ASANSOL West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

24791228
Construction Of Air -Conditioned Bus Stand At Different Places In The District Of Paschim Bardhaman. . Location: Dharampur More, Nos.-1
Open Tender
Indian
West Bengal
ADDA OFFICE ASANSOL
18-07-2020

Tender Details

Construction Of Air -Conditioned Bus Stand At Different Places In The District Of Paschim Bardhaman. . Location: Dharampur More, Nos.-1

Key Value

Document Fees
Refer document
EMD
INR 27003.0 /-
Tender Value
INR 13.50 Lakhs /-

BOQ Items

Name of Work: "Construction of Air -conditioned Bus Stand at different places in the district of paschim Bardhaman. ". Location: Dharampur More, Nos.-1
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone ) including removing spreading or stacking the spoils within a lead of 75 metre as per direction.The items includes necessary trimming the sides of trenches, levelling , dressing & ramming the bottom , bailing out water as required complete. BI01010001010000000000000515BI0100001141
2 1.1 Depth of excavation not exceeding 1500 mm BI01010001010000000000000515BI0100001142 32 cum
3 2 Earth work in filling in foundation trenches or plinth with goode earth , in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer, complete. BI01010001010000000000000515BI0100001143
4 2.1 With earth obtained from excavation of foundation. BI01010001010000000000000515BI0100001144 6.5 cum
5 3 Flling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating same by through saturation with water and ramming complete including cost of sand. BI01010001010000000000000515BI0100001145
6 3.1 By Fine sand . BI01010001010000000000000515BI0100001146 22.5 cum
7 4 Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand . BI01010001010000000000000515BI0100001147 68 sqm
8 5 Ordinary Cement concrete [mix 1:2:4]with graded stone chips (20 mm down) excluding shuttering and reinforcement, If any as per IS 456 - 2000. With Panchami variety. BI01010001010000000000000515BI0100001148 2.5 cum
9 6 b) Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.\n(i) Pakuri Variety BI01010001010000000000000515BI0100001149 23 cum
10 7 Brick work with 1st class bricks in cement mortar (1:6) BI01010001010000000000000515BI0100001150
11 7.1 In foundation and plinth BI01010001010000000000000515BI0100001151 6 cum
12 7.2 In superstructure BI01010001010000000000000515BI0100001152
13 7.3 Ground floor BI01010001010000000000000515BI0100001153 10 cum
14 8 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor BI01010001010000000000000515BI0100001154
15 8.1 Ground floor BI01010001010000000000000515BI0100001155 30.5 sqm
16 9 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with rewuired bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting , fixing and stricking out after completion of works. BI01010001010000000000000515BI0100001156
17 9.1 25 mm to 30 mm shuttering without staging in foundation etc. BI01010001010000000000000515BI0100001157
18 9.2 25 mm to 30 mm wooden shuttering BI01010001010000000000000515BI0100001158 41 sqm
19 9.3 Upto Ground floor roof level BI01010001010000000000000515BI0100001159 124 sqm
20 10 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, strips binders etc. including supplying of roads, initial straightening and removal of loose rust (if necessary) cutting to requisite length hooking and bending etc. complete as per drawing and direction. BI01010001010000000000000515BI0100001160
21 10.1 For M.S. / Tor steel.II. Other than\nSAIL/ TATA/RINL BI01010001010000000000000515BI0100001161
22 10.2 Upto Ground floor roof level. BI01010001010000000000000515BI0100001162 3.6 M.T.
23 11 Plaster (to wall, floor, etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints roughening of concrete surface including chipping and application of cement slurry where necessary etc. complete. BI01010001010000000000000515BI0100001163
24 11.01 With 6:1 cement mortar. BI01010001010000000000000515BI0100001164
25 11.02 15 mm thick plaster (Out side) BI01010001010000000000000515BI0100001165
26 11.03 In ground floor. BI01010001010000000000000515BI0100001166 120 sqm
27 11.04 20 mm thick plaster (Inside) BI01010001010000000000000515BI0100001167
28 11.05 In ground floor. BI01010001010000000000000515BI0100001168 64 sqm
29 11.06 10 mm thick plaster in (1:4)(Celing) BI01010001010000000000000515BI0100001169
30 11.07 In ground floor. BI01010001010000000000000515BI0100001170 47 sqm
31 12 Supplying fitting and fixing UPVC pipes A type and fitting conforming to Is: 13592-1992 with all necessary clamps nails, including making holes in walls, floors etc. cutting trenches in any soil thorugh masonry concrete structure etc. .f necessary and mending good damages including jointing with jointing materials(Spun yarn,valamoid / bitumen / M.seal etc.) complete. BI01010001010000000000000515BI0100001171
32 12.01 75 mm diameter. BI01010001010000000000000515BI0100001172 8 mtrs
33 13 Supplying ,fitting and fixing UPVC fittings conforming to IS 13592-1992. BI01010001010000000000000515BI0100001173
34 13.1 Plain tee 75 mm BI01010001010000000000000515BI0100001174 2 Each
35 13.2 Shoe 75 mm dia BI01010001010000000000000515BI0100001175 2 Each
36 14 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. BI01010001010000000000000515BI0100001176
37 14.01 One Coat BI01010001010000000000000515BI0100001177
38 14.02 Ground floor BI01010001010000000000000515BI0100001178 71.5 sqm
39 15 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. BI01010001010000000000000515BI0100001179
40 15.01 Two Coat BI01010001010000000000000515BI0100001180
41 15.02 c) Super Protective 100% Acrylic Emulsion. BI01010001010000000000000515BI0100001181 71.5 sqm
42 16 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior gade acrylic primer (as per manufacturer's specification)including cleaning and smoothning of surface.\nTwo Coats BI01010001010000000000000515BI0100001182 60 sqm
43 17 Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor] BI01010001010000000000000515BI0100001183
44 17.1 (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. BI01010001010000000000000515BI0100001184
45 17.2 (B) Light Colour BI01010001010000000000000515BI0100001185 38 sqm
46 18 Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick\nwith uniform texture & without decorative veins in columns,\nwall, facia etc. with 15 mm thick [avg] cement mortar (1:2)\nincluding making suitable arrangements to hold the stones\nproperly by brass / copper hooks including pointing in cement\nmortar (1:2) (1 white cement : 2 marble dust) with admixture\nof pigment matching the stone shades all complete as per\ndirection of the Engineer-in-charge including cost of all\nmaterials, labours, scaffolding, staging ,curing and\nroughening of concrete surface complete. Area of each\nGranite slab > 0.6 upto 1.0 square metre.\n[Using cement slurry at back side of granite @ 4.4 kg/sq.m &\nwhite cement slurry for joint filling @ 1.8 kg/sq.m] BI01010001010000000000000515BI0100001186 5.5 sqm
47 19 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc BI01010001010000000000000515BI0100001187
48 19.01 (B) Wall BI01010001010000000000000515BI0100001188
49 19.02 With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. BI01010001010000000000000515BI0100001189
50 19.03 A) Ground floor BI01010001010000000000000515BI0100001190
51 19.04 (a) Area of each tile upto 0.09 Sq.m BI01010001010000000000000515BI0100001191
52 19.05 (ii) Other than Coloured decorative including white BI01010001010000000000000515BI0100001192 44 sqm
53 20 M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board includingG.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mmrespectively and web 27 mm ) along with perimeter of ceiling with G.I.intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes,cost of accessories, fittings and fixtures, scaffolding and labour charges etc.complete)\nIn ground floor BI01010001010000000000000515BI0100001193 44 sqm
54 21 Supplying profiles of required section made of Aluminium Alloy\nExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized\n(with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work). BI01010001010000000000000515BI0100001194
55 21.01 (B) 15 Micron colour annodizing. BI01010001010000000000000515BI0100001195
56 21.02 A) Fixed partitions.\n(Unsupported length of vertical member more than 1.5 mtr.or both ends\nof vertical member restrained but panels more than 0.9 sq.m.) BI01010001010000000000000515BI0100001196
57 21.03 i) Top, bottom and side member. BI01010001010000000000000515BI0100001197 46 mtrs
58 21.04 ii) Intermediate member. BI01010001010000000000000515BI0100001198 23 mtrs
59 21.05 iii) Glazing clip. BI01010001010000000000000515BI0100001199 91 mtrs
60 21.06 B) Movable door shutter. BI01010001010000000000000515BI0100001200
61 21.07 i) Door frame. (Top & sides). BI01010001010000000000000515BI0100001201 11 mtrs
62 21.08 ii) Shutter : BI01010001010000000000000515BI0100001202
63 21.09 a) Top rail. BI01010001010000000000000515BI0100001203 2.4 mtrs
64 21.1 b) Bottom rail. BI01010001010000000000000515BI0100001204 2.4 mtrs
65 21.2 c) Lock rail BI01010001010000000000000515BI0100001205 2.4 mtrs
66 21.3 d) Door vertical. BI01010001010000000000000515BI0100001206 4.2 mtrs
67 21.4 e) Glazing clip. BI01010001010000000000000515BI0100001207 18 mtrs
68 22 Labour charge for fabrication and installation of composite door,\nwindow, partitions made from annodized extruded alloy aluminium\nsections for the following units:- BI01010001010000000000000515BI0100001208
69 22.01 Glazed aluminium sliding windows made of extruded and annodized\nalloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all\nincidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. BI01010001010000000000000515BI0100001209
70 22.02 Fixed glazing. BI01010001010000000000000515BI0100001210 32.5 sqm
71 23 Supplying heavy duty hydraulic double action floor spring along with top\npin/set of pivots conforming to IS: 6315 or any approved make as per\ndirection of Engineer in charge. BI01010001010000000000000515BI0100001211 2 each set
72 24 A) Supplying Aluminium casted body hydraulic door closer as per I.S.I. BI01010001010000000000000515BI0100001212 2 each
73 25 Supplying EPDM gusket of approved make and brand as per direction of\nEngineer in charge. BI01010001010000000000000515BI0100001213
74 25.01 b) 'U' shaped EPDM gasket for frames. BI01010001010000000000000515BI0100001214 111 mtrs
75 26 Supplying bubble free float glass of approved make and brand\nconforming to IS: 2835-1987;\n(A) clear, toughened glass conforming to IS: 2553-1992 (part-II) BI01010001010000000000000515BI0100001215
76 26.01 (ii) 8mm thick BI01010001010000000000000515BI0100001216 27 sqm
77 27 Supplying 4 lever mortice lock or any approved make and brand as per\ndirection of the Engineer- in -Charge. BI01010001010000000000000515BI0100001217
78 27.01 i) 150 mm. BI01010001010000000000000515BI0100001218 2 each
79 28 Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality of reputed brand as per direction of Eingineer-in- Charge fitted and fixed complete including all incidental charges. BI01010001010000000000000515BI0100001219 4 each
80 29 Supplying and fixing of hoardings of greatman\nincluding necessary angle support and good quality lamination for protection the same (15mtr X 1mtr) BI01010001010000000000000515BI0100001220 15 sqm
81 30 Supplying, fitting & fixing metal perforated chair, model via 3 seater on beam with arm all complet.(Godrej or similar quality make) BI01010001010000000000000515BI0100001221 8 set
82 31 Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single corestranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface] Avg. run 6 Mt.\n\n\n\n\n\n\n BI01010001010000000000000515BI0100001222 14 No.
83 32 Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm)\nsingle core stranded 'FR' PVC insulated & unsheathed\ncopper wire (Brand approved by EIC) in suitable size PVC\ncasing-capping (Precision make) with 1x22/0.3 (1.5 sqmm)\nsingle core stranded 'FR' PVC insulated & unsheathed\ncopper wire for ECC, incl. necy. fittings etc. with S & F 6A 5\npin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4\nModule top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface]. BI01010001010000000000000515BI0100001223
84 32.01 a)       On Board. BI01010001010000000000000515BI0100001224 2 No.
85 32.02 b) Average run 1.5 Mt. BI01010001010000000000000515BI0100001225 6 No.
86 33 Distribution wiring in 1.1 KV single core stranded 'FR'\nPVC insulated & unsheathed copper wire (Brand\napproved by EIC) in 20mm size PVC rigid conduit 'FR'\n(Precision make) incl. necy. fittings as required 2 x 4 Sq.mm +1x1.5Sq.mm as ecc 20 Mt. BI01010001010000000000000515BI0100001226 20 Mt.
87 34 Supply & fixing 240 V, 25A Modular type socket, 25A Modular type startar of Make – Cabtree / HPL / Roma, with 25A switch type MCB ( C-curve ) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S & F switch board and cover plate & necessary connection for AC controlling.\n\n BI01010001010000000000000515BI0100001227 2 No.
88 35 Supply & fixing of 25A, 3 pin, 240 V Modular type Plug top of Make – Cab tree / HPL / Roma, with necessary connection.\n\n BI01010001010000000000000515BI0100001228 2 No.
89 36 Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm)\nsingle core stranded 'FR' PVC insulated & unsheathed\ncopper wire (Brand approved by EIC) in suitable size PVC\ncasing-capping (Precision make) with 1x22/0.3 (1.5 sqmm)\nsingle core stranded 'FR' PVC insulated & unsheathed\ncopper wire for ECC, incl. necy. fittings etc. with S & F 6A 5\npin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4\nModule top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] Avg. run 1.5 Mtr. BI01010001010000000000000515BI0100001229 6 No.
90 37 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 mtrs.long and 1x4 SWG GI ( hot dip ) wire ( 4 mt.long ) 13 mm dia x 80 mm long GI bolts, double washers including supply and fixing of 15 mm GI pipe protection ( 1 mtr.long ) to be fitted with bitumen partly under the ground level driven to an average depth of 3.65 mtr.below the ground level and restoring surface duly rammed as below. BI01010001010000000000000515BI0100001230 2 No.
91 38 Treatment of soil by using salt & charcoal or coke . BI01010001010000000000000515BI0100001231 2 No.
92 39 Supply, testing & installation 1.5 Ton Capacity Inverter Air Conditioner Machine Durafresh makes Carrier (3 Star). BI01010001010000000000000515BI0100001232 2 No.
93 40 Supply and fixing 415 V, 63 Amps. ICDP main switch with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc. in complete of make Havells / Standard /Legrand. BI01010001010000000000000515BI0100001233 1 No.
94 41 \nSupply & fixing double door SPN MCB (2 + 4 way) distribution board with IP 42/43 protection, Surface in wall and mending good the damages to original finish incl, inter connection with suitable size of copper wire and neutral link & provision of earthing arrangement along with 63 A DP isolator as incoming & 6-32A SP MCB in outgoing. Legrand Cat no. 607710 or similar. BI01010001010000000000000515BI0100001234 1 No.
95 42 Supply and drawing of PVC / XLPE Alumunium unarmoured cable 1.1 KV grade at work site of make Havells / Polycab / KEI. Size 16 sq.mm x 2 core BI01010001010000000000000515BI0100001235 50 Mt.
96 43 Laying of cable in underground trench 460 mm wide x 760 mm average depth,with brick protection on the top of the cable with 8 ( eight ) Nos.brick per meter,including filling the space between the brick & cable and also the trench with shifted soil,levelling up and restore the surface duly rammed. BI01010001010000000000000515BI0100001236 50 Mt.
97 44 Supply & laying of GI pipe medium gauge (ISI medium) protection with necessary fittings and jointing materials as required. 40 mm dia BI01010001010000000000000515BI0100001237 6 Mt.
98 45 Finishing the end of following XLPE/PVC armoured cable by crimping method incl.supplying and fixing solderless vsocket, tapes, anticorrosive paste & jointing materials.\nSize 16 sq.mm x 2 core BI01010001010000000000000515BI0100001238 2 No.
99 46 Supply, Installation and Commissioning of LED Light fittings compete with all accessories, Similar to Cat. No. Philips DN 097 B LED10S 6500 PSU WH BI01010001010000000000000515BI0100001239 6 No.
100 47 Supply, Installation and Commissioning of LED Light fittings compete with all accessories, Similar to Cat. No.Philips DN 092B LED 10 S 6500 PSU WH Green LED Ultima BI01010001010000000000000515BI0100001240 7 No.
101 48 Supplying fitting and fixing plaque made of Granite slabs ( single piece) of 15 mm to 18 mm thick with uniform texture and without decorative veins in facia etc fixing with using Cement slurry at back side of granite @4.4 kg/sq.m and white cement slurry for joint filling @1.8 kg/sq.m.including making lettering , sign marks etc as per direction in the granite slabs with fixed at brick wall (in 1:6) as directed including earth cutting , 100 mm thick sand filling , B.F.S, 100 mm thick Cement concrete (1:2:4) and plastering with 20 mm thick sand cement mortar (6:1) as specifed by the Department including wall putty , Acrylic primer & Super Protective 100% Acrylic Emulsion two coats including all incedential charges for labours , materials , machinaries & transportig charges complete in all respect as per direction of EIC. BI01010001010000000000000515BI0100001241 1 Nos.
102 49 Sub Total BI01010001010000000000000515BI0100001242
103 50 GST 12% BI01010001010000000000000515BI0100001243 1 Nos.
104 51 CESS 1% BI01010001010000000000000515BI0100001244 1 Nos.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail