Asansol Durgapur Development Authority -ADDA has published Construction Of Air - Conditioned Bus Stand At Different Places In The District Of Paschim Bardhaman. . Location: Senraleigh, Nos.-1. Submission Date for this Tender is 18-07-2020. Building Work Tenders in ADDA OFFICE ASANSOL West Bengal. Bidders can get complete Tender details and download the document.
Name of Work: "Construction of Air - conditioned Bus Stand at different places in the district of paschim Bardhaman. ". Location: Senraleigh, Nos.-1 | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone ) including removing spreading or stacking the spoils within a lead of 75 metre as per direction.The items includes necessary trimming the sides of trenches, levelling , dressing & ramming the bottom , bailing out water as required complete. | BI01010001010000000000000515BI0100001141 | ||
2 | 1.1 | Depth of excavation not exceeding 1500 mm | BI01010001010000000000000515BI0100001142 | 32 | cum |
3 | 2 | Earth work in filling in foundation trenches or plinth with goode earth , in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer, complete. | BI01010001010000000000000515BI0100001143 | ||
4 | 2.1 | With earth obtained from excavation of foundation. | BI01010001010000000000000515BI0100001144 | 6.5 | cum |
5 | 3 | Flling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating same by through saturation with water and ramming complete including cost of sand. | BI01010001010000000000000515BI0100001145 | ||
6 | 3.1 | By Fine sand . | BI01010001010000000000000515BI0100001146 | 22.5 | cum |
7 | 4 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand . | BI01010001010000000000000515BI0100001147 | 68 | sqm |
8 | 5 | Ordinary Cement concrete [mix 1:2:4]with graded stone chips (20 mm down) excluding shuttering and reinforcement, If any as per IS 456 - 2000. With Panchami variety. | BI01010001010000000000000515BI0100001148 | 2.5 | cum |
9 | 6 | b) Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.\n(i) Pakuri Variety | BI01010001010000000000000515BI0100001149 | 23 | cum |
10 | 7 | Brick work with 1st class bricks in cement mortar (1:6) | BI01010001010000000000000515BI0100001150 | ||
11 | 7.1 | In foundation and plinth | BI01010001010000000000000515BI0100001151 | 6 | cum |
12 | 7.2 | In superstructure | BI01010001010000000000000515BI0100001152 | ||
13 | 7.3 | Ground floor | BI01010001010000000000000515BI0100001153 | 10 | cum |
14 | 8 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor | BI01010001010000000000000515BI0100001154 | ||
15 | 8.1 | Ground floor | BI01010001010000000000000515BI0100001155 | 30.5 | sqm |
16 | 9 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with rewuired bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting , fixing and stricking out after completion of works. | BI01010001010000000000000515BI0100001156 | ||
17 | 9.1 | 25 mm to 30 mm shuttering without staging in foundation etc. | BI01010001010000000000000515BI0100001157 | ||
18 | 9.2 | 25 mm to 30 mm wooden shuttering | BI01010001010000000000000515BI0100001158 | 41 | sqm |
19 | 9.3 | Upto Ground floor roof level | BI01010001010000000000000515BI0100001159 | 124 | sqm |
20 | 10 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, strips binders etc. including supplying of roads, initial straightening and removal of loose rust (if necessary) cutting to requisite length hooking and bending etc. complete as per drawing and direction. | BI01010001010000000000000515BI0100001160 | ||
21 | 10.1 | For M.S. / Tor steel.II. Other than\nSAIL/ TATA/RINL | BI01010001010000000000000515BI0100001161 | ||
22 | 10.2 | Upto Ground floor roof level. | BI01010001010000000000000515BI0100001162 | 3.6 | M.T. |
23 | 11 | Plaster (to wall, floor, etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints roughening of concrete surface including chipping and application of cement slurry where necessary etc. complete. | BI01010001010000000000000515BI0100001163 | ||
24 | 11.01 | With 6:1 cement mortar. | BI01010001010000000000000515BI0100001164 | ||
25 | 11.02 | 15 mm thick plaster (Out side) | BI01010001010000000000000515BI0100001165 | ||
26 | 11.03 | In ground floor. | BI01010001010000000000000515BI0100001166 | 120 | sqm |
27 | 11.04 | 20 mm thick plaster (Inside) | BI01010001010000000000000515BI0100001167 | ||
28 | 11.05 | In ground floor. | BI01010001010000000000000515BI0100001168 | 64 | sqm |
29 | 11.06 | 10 mm thick plaster in (1:4)(Celing) | BI01010001010000000000000515BI0100001169 | ||
30 | 11.07 | In ground floor. | BI01010001010000000000000515BI0100001170 | 47 | sqm |
31 | 12 | Supplying fitting and fixing UPVC pipes A type and fitting conforming to Is: 13592-1992 with all necessary clamps nails, including making holes in walls, floors etc. cutting trenches in any soil thorugh masonry concrete structure etc. .f necessary and mending good damages including jointing with jointing materials(Spun yarn,valamoid / bitumen / M.seal etc.) complete. | BI01010001010000000000000515BI0100001171 | ||
32 | 12.01 | 75 mm diameter. | BI01010001010000000000000515BI0100001172 | 8 | mtrs |
33 | 13 | Supplying ,fitting and fixing UPVC fittings conforming to IS 13592-1992. | BI01010001010000000000000515BI0100001173 | ||
34 | 13.1 | Plain tee 75 mm | BI01010001010000000000000515BI0100001174 | 2 | Each |
35 | 13.2 | Shoe 75 mm dia | BI01010001010000000000000515BI0100001175 | 2 | Each |
36 | 14 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. | BI01010001010000000000000515BI0100001176 | ||
37 | 14.01 | One Coat | BI01010001010000000000000515BI0100001177 | ||
38 | 14.02 | Ground floor | BI01010001010000000000000515BI0100001178 | 71.5 | sqm |
39 | 15 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. | BI01010001010000000000000515BI0100001179 | ||
40 | 15.01 | Two Coat | BI01010001010000000000000515BI0100001180 | ||
41 | 15.02 | c) Super Protective 100% Acrylic Emulsion. | BI01010001010000000000000515BI0100001181 | 71.5 | sqm |
42 | 16 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior gade acrylic primer (as per manufacturer's specification)including cleaning and smoothning of surface.\nTwo Coats | BI01010001010000000000000515BI0100001182 | 60 | sqm |
43 | 17 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor] | BI01010001010000000000000515BI0100001183 | ||
44 | 17.1 | (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. | BI01010001010000000000000515BI0100001184 | ||
45 | 17.2 | (B) Light Colour | BI01010001010000000000000515BI0100001185 | 38 | sqm |
46 | 18 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick\nwith uniform texture & without decorative veins in columns,\nwall, facia etc. with 15 mm thick [avg] cement mortar (1:2)\nincluding making suitable arrangements to hold the stones\nproperly by brass / copper hooks including pointing in cement\nmortar (1:2) (1 white cement : 2 marble dust) with admixture\nof pigment matching the stone shades all complete as per\ndirection of the Engineer-in-charge including cost of all\nmaterials, labours, scaffolding, staging ,curing and\nroughening of concrete surface complete. Area of each\nGranite slab > 0.6 upto 1.0 square metre.\n[Using cement slurry at back side of granite @ 4.4 kg/sq.m &\nwhite cement slurry for joint filling @ 1.8 kg/sq.m] | BI01010001010000000000000515BI0100001186 | 5.5 | sqm |
47 | 19 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc | BI01010001010000000000000515BI0100001187 | ||
48 | 19.01 | (B) Wall | BI01010001010000000000000515BI0100001188 | ||
49 | 19.02 | With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. | BI01010001010000000000000515BI0100001189 | ||
50 | 19.03 | A) Ground floor | BI01010001010000000000000515BI0100001190 | ||
51 | 19.04 | (a) Area of each tile upto 0.09 Sq.m | BI01010001010000000000000515BI0100001191 | ||
52 | 19.05 | (ii) Other than Coloured decorative including white | BI01010001010000000000000515BI0100001192 | 44 | sqm |
53 | 20 | M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board includingG.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mmrespectively and web 27 mm ) along with perimeter of ceiling with G.I.intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes,cost of accessories, fittings and fixtures, scaffolding and labour charges etc.complete)\nIn ground floor | BI01010001010000000000000515BI0100001193 | 44 | sqm |
54 | 21 | Supplying profiles of required section made of Aluminium Alloy\nExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized\n(with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work). | BI01010001010000000000000515BI0100001194 | ||
55 | 21.01 | (B) 15 Micron colour annodizing. | BI01010001010000000000000515BI0100001195 | ||
56 | 21.02 | A) Fixed partitions.\n(Unsupported length of vertical member more than 1.5 mtr.or both ends\nof vertical member restrained but panels more than 0.9 sq.m.) | BI01010001010000000000000515BI0100001196 | ||
57 | 21.03 | i) Top, bottom and side member. | BI01010001010000000000000515BI0100001197 | 46 | mtrs |
58 | 21.04 | ii) Intermediate member. | BI01010001010000000000000515BI0100001198 | 23 | mtrs |
59 | 21.05 | iii) Glazing clip. | BI01010001010000000000000515BI0100001199 | 91 | mtrs |
60 | 21.06 | B) Movable door shutter. | BI01010001010000000000000515BI0100001200 | ||
61 | 21.07 | i) Door frame. (Top & sides). | BI01010001010000000000000515BI0100001201 | 11 | mtrs |
62 | 21.08 | ii) Shutter : | BI01010001010000000000000515BI0100001202 | ||
63 | 21.09 | a) Top rail. | BI01010001010000000000000515BI0100001203 | 2.4 | mtrs |
64 | 21.1 | b) Bottom rail. | BI01010001010000000000000515BI0100001204 | 2.4 | mtrs |
65 | 21.2 | c) Lock rail | BI01010001010000000000000515BI0100001205 | 2.4 | mtrs |
66 | 21.3 | d) Door vertical. | BI01010001010000000000000515BI0100001206 | 4.2 | mtrs |
67 | 21.4 | e) Glazing clip. | BI01010001010000000000000515BI0100001207 | 18 | mtrs |
68 | 22 | Labour charge for fabrication and installation of composite door,\nwindow, partitions made from annodized extruded alloy aluminium\nsections for the following units:- | BI01010001010000000000000515BI0100001208 | ||
69 | 22.01 | Glazed aluminium sliding windows made of extruded and annodized\nalloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all\nincidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. | BI01010001010000000000000515BI0100001209 | ||
70 | 22.02 | Fixed glazing. | BI01010001010000000000000515BI0100001210 | 32.5 | sqm |
71 | 23 | Supplying heavy duty hydraulic double action floor spring along with top\npin/set of pivots conforming to IS: 6315 or any approved make as per\ndirection of Engineer in charge. | BI01010001010000000000000515BI0100001211 | 2 | each set |
72 | 24 | A) Supplying Aluminium casted body hydraulic door closer as per I.S.I. | BI01010001010000000000000515BI0100001212 | 2 | each |
73 | 25 | Supplying EPDM gusket of approved make and brand as per direction of\nEngineer in charge. | BI01010001010000000000000515BI0100001213 | ||
74 | 25.01 | b) 'U' shaped EPDM gasket for frames. | BI01010001010000000000000515BI0100001214 | 111 | mtrs |
75 | 26 | Supplying bubble free float glass of approved make and brand\nconforming to IS: 2835-1987;\n(A) clear, toughened glass conforming to IS: 2553-1992 (part-II) | BI01010001010000000000000515BI0100001215 | ||
76 | 26.01 | (ii) 8mm thick | BI01010001010000000000000515BI0100001216 | 27 | sqm |
77 | 27 | Supplying 4 lever mortice lock or any approved make and brand as per\ndirection of the Engineer- in -Charge. | BI01010001010000000000000515BI0100001217 | ||
78 | 27.01 | i) 150 mm. | BI01010001010000000000000515BI0100001218 | 2 | each |
79 | 28 | Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality of reputed brand as per direction of Eingineer-in- Charge fitted and fixed complete including all incidental charges. | BI01010001010000000000000515BI0100001219 | 4 | each |
80 | 29 | Supplying and fixing of hoardings of greatman\nincluding necessary angle support and good quality lamination for protection the same (15mtr X 1mtr) | BI01010001010000000000000515BI0100001220 | 15 | sqm |
81 | 30 | Supplying, fitting & fixing metal perforated chair, model via 3 seater on beam with arm all complet.(Godrej or similar quality make) | BI01010001010000000000000515BI0100001221 | 8 | set |
82 | 31 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single corestranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface] Avg. run 6 Mt.\n\n\n\n\n\n\n | BI01010001010000000000000515BI0100001222 | 14 | No. |
83 | 32 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm)\nsingle core stranded 'FR' PVC insulated & unsheathed\ncopper wire (Brand approved by EIC) in suitable size PVC\ncasing-capping (Precision make) with 1x22/0.3 (1.5 sqmm)\nsingle core stranded 'FR' PVC insulated & unsheathed\ncopper wire for ECC, incl. necy. fittings etc. with S & F 6A 5\npin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4\nModule top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface]. | BI01010001010000000000000515BI0100001223 | ||
84 | 32.01 | a) On Board. | BI01010001010000000000000515BI0100001224 | 2 | No. |
85 | 32.02 | b) Average run 1.5 Mt. | BI01010001010000000000000515BI0100001225 | 6 | No. |
86 | 33 | Distribution wiring in 1.1 KV single core stranded 'FR'\nPVC insulated & unsheathed copper wire (Brand\napproved by EIC) in 20mm size PVC rigid conduit 'FR'\n(Precision make) incl. necy. fittings as required 2 x 4 Sq.mm +1x1.5Sq.mm as ecc 20 Mt. | BI01010001010000000000000515BI0100001226 | 20 | Mt. |
87 | 34 | Supply & fixing 240 V, 25A Modular type socket, 25A Modular type startar of Make – Cabtree / HPL / Roma, with 25A switch type MCB ( C-curve ) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S & F switch board and cover plate & necessary connection for AC controlling.\n\n | BI01010001010000000000000515BI0100001227 | 2 | No. |
88 | 35 | Supply & fixing of 25A, 3 pin, 240 V Modular type Plug top of Make – Cab tree / HPL / Roma, with necessary connection.\n\n | BI01010001010000000000000515BI0100001228 | 2 | No. |
89 | 36 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm)\nsingle core stranded 'FR' PVC insulated & unsheathed\ncopper wire (Brand approved by EIC) in suitable size PVC\ncasing-capping (Precision make) with 1x22/0.3 (1.5 sqmm)\nsingle core stranded 'FR' PVC insulated & unsheathed\ncopper wire for ECC, incl. necy. fittings etc. with S & F 6A 5\npin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4\nModule top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] Avg. run 1.5 Mtr. | BI01010001010000000000000515BI0100001229 | 6 | No. |
90 | 37 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 mtrs.long and 1x4 SWG GI ( hot dip ) wire ( 4 mt.long ) 13 mm dia x 80 mm long GI bolts, double washers including supply and fixing of 15 mm GI pipe protection ( 1 mtr.long ) to be fitted with bitumen partly under the ground level driven to an average depth of 3.65 mtr.below the ground level and restoring surface duly rammed as below. | BI01010001010000000000000515BI0100001230 | 2 | No. |
91 | 38 | Treatment of soil by using salt & charcoal or coke . | BI01010001010000000000000515BI0100001231 | 2 | No. |
92 | 39 | Supply, testing & installation 1.5 Ton Capacity Inverter Air Conditioner Machine Durafresh makes Carrier (3 Star). | BI01010001010000000000000515BI0100001232 | 2 | No. |
93 | 40 | Supply and fixing 415 V, 63 Amps. ICDP main switch with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc. in complete of make Havells / Standard /Legrand. | BI01010001010000000000000515BI0100001233 | 1 | No. |
94 | 41 | \nSupply & fixing double door SPN MCB (2 + 4 way) distribution board with IP 42/43 protection, Surface in wall and mending good the damages to original finish incl, inter connection with suitable size of copper wire and neutral link & provision of earthing arrangement along with 63 A DP isolator as incoming & 6-32A SP MCB in outgoing. Legrand Cat no. 607710 or similar. | BI01010001010000000000000515BI0100001234 | 1 | No. |
95 | 42 | Supply and drawing of PVC / XLPE Alumunium unarmoured cable 1.1 KV grade at work site of make Havells / Polycab / KEI. Size 16 sq.mm x 2 core | BI01010001010000000000000515BI0100001235 | 50 | Mt. |
96 | 43 | Laying of cable in underground trench 460 mm wide x 760 mm average depth,with brick protection on the top of the cable with 8 ( eight ) Nos.brick per meter,including filling the space between the brick & cable and also the trench with shifted soil,levelling up and restore the surface duly rammed. | BI01010001010000000000000515BI0100001236 | 50 | Mt. |
97 | 44 | Supply & laying of GI pipe medium gauge (ISI medium) protection with necessary fittings and jointing materials as required. 40 mm dia | BI01010001010000000000000515BI0100001237 | 6 | Mt. |
98 | 45 | Finishing the end of following XLPE/PVC armoured cable by crimping method incl.supplying and fixing solderless vsocket, tapes, anticorrosive paste & jointing materials.\nSize 16 sq.mm x 2 core | BI01010001010000000000000515BI0100001238 | 2 | No. |
99 | 46 | Supply, Installation and Commissioning of LED Light fittings compete with all accessories, Similar to Cat. No. Philips DN 097 B LED10S 6500 PSU WH | BI01010001010000000000000515BI0100001239 | 6 | No. |
100 | 47 | Supply, Installation and Commissioning of LED Light fittings compete with all accessories, Similar to Cat. No.Philips DN 092B LED 10 S 6500 PSU WH Green LED Ultima | BI01010001010000000000000515BI0100001240 | 7 | No. |
101 | 48 | Supplying fitting and fixing plaque made of Granite slabs ( single piece) of 15 mm to 18 mm thick with uniform texture and without decorative veins in facia etc fixing with using Cement slurry at back side of granite @4.4 kg/sq.m and white cement slurry for joint filling @1.8 kg/sq.m.including making lettering , sign marks etc as per direction in the granite slabs with fixed at brick wall (in 1:6) as directed including earth cutting , 100 mm thick sand filling , B.F.S, 100 mm thick Cement concrete (1:2:4) and plastering with 20 mm thick sand cement mortar (6:1) as specifed by the Department including wall putty , Acrylic primer & Super Protective 100% Acrylic Emulsion two coats including all incedential charges for labours , materials , machinaries & transportig charges complete in all respect as per direction of EIC. | BI01010001010000000000000515BI0100001241 | 1 | Nos. |
102 | 49 | Sub Total | BI01010001010000000000000515BI0100001242 | ||
103 | 50 | GST 12% | BI01010001010000000000000515BI0100001243 | 1 | Nos. |
104 | 51 | CESS 1% | BI01010001010000000000000515BI0100001244 | 1 | Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail