}

Construction Of Boundary Wall And Outer Development Work At Phc Alawada , Distt . Alwar ( Under Msdp ) , Alwar-Rajasthan

Medical Health And Family Welfare has published Construction Of Boundary Wall And Outer Development Work At Phc Alawada , Distt . Alwar ( Under Msdp ) . Submission Date for this Tender is 10-07-2020. Wall construction Tenders in Alwar Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

24751937
Construction Of Boundary Wall And Outer Development Work At Phc Alawada , Distt . Alwar ( Under Msdp )
Open Tender
Indian
Rajasthan
Alwar
10-07-2020

Tender Details

Construction Of Boundary Wall And Outer Development Work At Phc Alawada , Distt . Alwar ( Under Msdp )

Key Value

Document Fees
INR 500 /-
EMD
INR 40000.0 /-
Tender Value
INR 20 Lakhs /-

BOQ Items

Name of Work: Construction of Boundary wall and Outer development work at PHC Alawada, Distt. Alwar (Under MSDP)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Part 'A' : Civil Work BI01010001010000000000000515BI0100001112
2 1.01 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils 227 Cum
3 2 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix\n1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate \n40 mm nominal size). 95 Cum
4 3 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.\nM20 grade Nominal Mix / Design Mix 3 Cum
5 4 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. 16 Sqm
6 5 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) 400 Kg
7 6 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 203 Cum
8 7 Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand). 111 Cum
9 8 Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification .75mm thick. 101 Sqm
10 9 Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification : 89 Sqm.
11 10 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20 mm thick 405 Sqm.
12 11 Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) :Raised and cut pointing. 405 Sqm,
13 12 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.\n New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 980 Sqm.
14 13 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : \nTwo or more coats on new work 50 Sqm.
15 14 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and all lift upto 1.5m, disposed earth to be levelled and neatly dressed:\nAll kinds of soil 1000 Cum
16 15 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 1000 Cum
17 16 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Extra if square,rectangular hollow tubelar sections are used or grill made by flats only 1159 Kg.
18 17 Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks:\n1) Shape as defined by Engineer incharge\n2) Tensile splitting strength and braking load as per BS 6717:2001\n3) Color: Grey cement natural colour\n4) Variation in dimension: Less than 1.6mm.\n5) Variation in thickness: Less than 3.2mm\n6) Abrasion: As per BS: 6717:2001 495 Sqm,
19 18 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.3.0mm thick (Wt. 5.0 Kg./Mtr. Sq.) 120 Sqm,
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail