}

Special Repair / Replacement Of Lt Panel At Lower / Upper Dahung Area And Provision Of Lt Panel At 5 Mtn Arty Bde Sig Coy Under Ge 859 Ews, TENGA VALLEY-Arunachal Pradesh

Military Engineer Services-MES has published Special Repair / Replacement Of Lt Panel At Lower / Upper Dahung Area And Provision Of Lt Panel At 5 Mtn Arty Bde Sig Coy Under Ge 859 Ews. Submission Date for this Tender is 16-07-2020. Electrical Panel Tenders in TENGA VALLEY Arunachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

24733582
Corrigendum : Special Repair / Replacement Of Lt Panel At Lower / Upper Dahung Area And Provision Of Lt Panel At 5 Mtn Arty Bde Sig Coy Under Ge 859 Ews
Open Tender
Indian
Arunachal Pradesh
TENGA VALLEY
16-07-2020

Tender Details

Special Repair / Replacement Of Lt Panel At Lower / Upper Dahung Area And Provision Of Lt Panel At 5 Mtn Arty Bde Sig Coy Under Ge 859 Ews

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 09-Jul-2020 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 16-07-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 33000.0 /-
Tender Value
INR 16.50 Lakhs /-

BOQ Items

Nature of Work : SPECIAL REPAIR / REPLACEMENT OF LT PANEL AT LOWER / UPPER DAHUNG AREA AND PROVISION OF LT PANEL AT 5 MTN ARTY BDE SIG COY UNDER GE 859 EWS
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Taking down LT panel including MCCB , MCB etc any type any size complete all as specified and directed. 25 Each
2 2 Supply, install ,testing and commisioning of LT panel board 'out door type' of size 1000mm (height) x 1000mm (breadth) x 500mm (depth) minimum dimensions, factory fabricated CPRI approved with suitable neoprene rubber gasket to make it completely dirt and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS-13947, double door front & back openable and 4 side slanting canopy on roof top. The panel shall be provided with ventilation facility in the form of louvers for better heat dessipation by tinted copper bus bar wrapped with coloured PVC tape/ sleeves of rating in conformity to the incoming ACB/ MCCB rating. The panel board shall be fabricated out of 3.00 mm thick CRCA sheet duly pre-treated and powder coated supporting frame made out of 50x50x5 mm angle iron & MC 100 channel base suitable for 3 ph, 4 wire system 415/440 volts grade including complete internal wiring with not less than 2.50 sqmm copper wire including cable grands of suitable size including suitable PCC (1:3:6) type C-2 and cable joint with lugs in MCCBs/MCB including provision of following equipments :-\n\n(a) MCCB 200 A, 4P, 50 Hz, 415 V with rupturing capacity 35 KA ------------------01 No (incoming)\n\n(b) MCCB 40 A, 4P, 50 Hz, 415 V with breaking capacity 35 KA-------- 04 Nos \n\n(c) Time switches 415 V single phase, 20 A rating with contractor fitted inside steel enclosure--01 No\n\n(d) Digital Type AC Voltmeter with built in selector switch, 3 phase, 10-100 A volts range, accuracy class-0.5, size 96x96mm. Model No AE 60332 of Make AE ------------------- 1 No\n\n(e) Digital type AC ammeter 0 to 100 A with built in selector switch & 03 Nos CTs (Type : CBF-0.6-D1, Accuracy class-1.0, CT Ratio-600/5, Burden -15 VA), 3 phase, Accuracy class -0.5, size 96x96mm. Model No. AE 62332 of Make AE------------------------1 No\n\n(f) Indicator lamp with integral circuit (230/240 V) & cluster LED ( Red, Orange, Blue) ---------01 Set Make of LT Panel : Associated Control Panel Pvt Ltd, Guwahati/ Maklik Industries, Jorhat 14 Each Job
3 3 Supply, install ,testing and commisioning of LT panel board 'out door type' of size 1000mm (height) x 1000mm (breadth) x 500mm (depth) minimum dimensions, factory fabricated CPRI approved with suitable neoprene rubber gasket to make it completely dirt and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS-13947, double door front & back openable and 4 side slanting canopy on roof top. The panel shall be provided with ventilation facility in the form of louvers for better heat dessipation by tinted copper bus bar wrapped with coloured PVC tape/ sleeves of rating in conformity to the incoming ACB/ MCCB rating. The panel board shall be fabricated out of 3.00 mm thick CRCA sheet duly pre-treated and powder coated supporting frame made out of 50x50x5 mm angle iron & MC 100 channel base suitable for 3 ph, 4 wire system 415/440 volts grade including complete internal wiring with not less than 2.50 sqmm copper wire including cable grands of suitable size including suitable PCC (1:3:6) type C-2 and cable joint with lugs in MCCBs/ MCB including provision of following equipments :-\n\n(a) MCCB 160 A, 4P, 50 Hz, 415 V with breaking capacity 35 KA ------------------01 No (incoming)\n\n(b) MCCB 40 A, 4P, 50 Hz, 415 V with breaking capacity 35 KA-------- 04 Nos \n\n(c) Time switches 415 V, single phase, 20 A rating with contractor fitted inside steel enclosure---01 No\n\n(d) Digital Type AC Voltmeter with built in selector switch, 3 phase, 10-100 A volts range, accuracy class-0.5, size 96x96mm. Model No AE 60332 of Make AE ------------------- 1 No\n\n(e) Digital type AC ammeter 0 to 100 A with built in selector switch & 03 Nos CTs (Type : CBF-0.6-D1, Accuracy class-1.0, CT Ratio-600/5, Burden -15 VA), 3 phase, Accuracy class -0.5, size 96x96mm. Model No. AE 62332 of Make AE------------------------1 No\n\n(f) Indicator lamp with integral circuit (230/240 V) & cluster LED ( Red, Orange, Blue) --------01 Set Make of LT Panel : Associated Control Panel Pvt Ltd, Guwahati/ Maklik Industries, Jorhat 11 Each Job
4 4 Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing including taking down old unserviceable earthing plate complete all as directed by Engineer In Charge. 50 Each
5 5 Supply, install ,testing and commisioning of LT panel board 'out door type' of size 1000mm (height) x 1000mm (breadth) x 500mm (depth) minimum dimensions, factory fabricated CPRI approved with suitable neoprene rubber gasket to make it completely dirt and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS-13947, double door front & back openable and 4 side slanting canopy on roof top. The panel shall be provided with ventilation facility in the form of louvers for better heat dessipation by tinted copper bus bar wrapped with coloured PVC tape/ sleeves of rating in conformity to the incoming ACB/ MCCB rating. The panel board shall be fabricated out of 3.00 mm thick CRCA sheet duly pre-treated and powder coated supporting frame made out of 50x50x5 mm angle iron & MC 100 channel base suitable for 3 ph, 4 wire system 415/440 volts grade including complete internal wiring with not less than 2.50 sqmm copper wire including cable grands of suitable size including suitable PCC (1:3:6) type C-2 and cable joint with lugs in MCCBs/ MCB including provision of following equipments :-\nMCCB 100 A, 4P, 50 Hz, 415 V with breaking capacity 25 KA-----------------01 No \nMCCB 63 A, 4P, 50 Hz, 415 V with breaking capacity 25 KA------------------ 01 No\nMCCB 40 A, 4P, 50 Hz, 415 V with breaking capacity 25 KA------------------ 01 No\n\n(a) Time switches 415 V, single phase, 20 A rating with contractor fitted inside steel enclosure--01 No\n\n(b) Digital Type AC Voltmeter with built in selector switch, 3 phase, 10-100 A volts range, accuracy class-0.5, size 96x96mm. Model No AE 60332 of Make AE ------------------- 1 No\n\n(c) Digital type AC ammeter 0 to 100 A with built in selector switch & 03 Nos CTs (Type : CBF-0.6-D1, Accuracy class-1.0, CT Ratio-600/5, Burden -15 VA), 3 phase, Accuracy class -0.5, size 96x96mm. Model No. AE 62332 of Make AE-------------------------------------1 No\n\n(d) Indicator lamp with integral circuit (230/240 V) & cluster LED ( Red, Orange, Blue) --------01 Set Make of LT Panel : Associated Control Panel Pvt Ltd, Guwahati/ Maklik Industries, Jorhat\n 1 Each Job
6 6 Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to GI strip 32x6 mm size by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer In Charge. 2 Each
7 7 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation and getting out in soft/loose soil complete all as specified and directed. 19 CUM
8 8 Returning,filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick, in soft/loose soil complete all as specified and directed. 11 CUM
9 9 Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed. 8 CUM
10 10 Supplying, spreading including watering and consolidation clean and dry sand in trenches around the cable for cushioning complete all as specified and directed. Note :- Prunned thickness will be measured and paid. 6 CUM
11 11 Supplying and laying unreinforced precast cable cover, Class LV, Type 1, flat size 250mm x 150mm x 40mm complete all as specified and directed. 493 Each
12 12 S&F GI tubing 50 mm bore light grade laid in trenches complete including fittings complete all as specified and directed. 12 RM
13 13 Supplying, laying, jointing and testing of LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm, 3.5 core making connection with suitable size of eyelet on both sides laid in trenches etc complete all as specified and directed. 88 RM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail