Road And Building Department-RBD has published Upgradation Of Khamar Chc For 2019-20 Under Nhm-Supplementary Pip Upgradation Of Khamar Chc For 2019-20 Under Nhm-Supplementary Pip. Submission Date for this Tender is 14-07-2020. Civil Work Tenders in ANGUL Odisha. Bidders can get complete Tender details and download the document.
| Name of Work: Upgradation CHC, Khamar for 2019-20 under NHM-Supplementary PIP. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART-A (CIVIL WORKS)\nDismentalling brick or stone masonary in lime or cement mortar under / above 3 mtr height including stacking the useful materials for re-use and removing the debries from site with all leads as directed by the Engineer-in-charge including all labour and T&P required for the work etc. including labour cess but excluding GST complete | 67.79 | Cum | |
| 2 | 2 | Dismanting of prestressed / reinforced cement concrete grade M-20 and above incluidng T&P. & scaffolding where ever necessary sorting the dismantled materials disposal of unserviceable materials and stacking the serviceable materials with all lifts & lead of 1000m. with all labour, T&P. machineries etc. including labour cess but excluding GST complete as per specification & direction of the Engineer-in-charge | 1.61 | Cum | |
| 3 | 3 | Removing old lime or cement plaster from walls including raking out joint 12mm deep and removing the debris from site with all leads as directed by the Engineer-in-charge including all labour and T&P. required for the work etc. including labour cess but excluding GST complete | 114.6 | Sqm | |
| 4 | 4 | Earth work excavation of foundation trenches in hard soil within 50m initial lead and 1.5m initial lift including rough dressing breaking clods to maximum 5cm to 7cm and laying in layers not to exceeding 0.3m in depth including removal of stumps, roots, shrubs and other foreign debries from the cut surface including basic cost, conveyance all T&P and cost of all labour as required for the work etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge | 23.79 | Cum | |
| 5 | 5 | Supplying and filling foundation and plinth with sand in layers not exceeding 150 mm thick well watered and rammed with basic cost, conveyance, royalities and of all materials, labour, T&P required including labour cess but excluding GST for the work etc. including labour cess but excluding GST complete (Measurement to be taken on compacted section only) | 11.27 | Cum | |
| 6 | 6 | Cement concrete (1:3:6) in foundation and floor i;e below the base course of terrazo flooring using 4cm (1½”) size black crusher hard broken granite aggregates / chips / metal of approved quality and from approved quarry, including lowering, laying concrete, watering curing etc. complete to required level laid in layers not exceeding 1'-6" thick including basic cost, conveyance, royalities of all materials and cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge | 13.53 | Cum | |
| 7 | 7 | Cement concrete work (1:2:4) using 12mm (½”) size black hard crusher broken granite chips of approved quality and from approved quarry over top of wall including hoisting, lowering, laying and compacting, watering & curing, as directed including basic cost, conveyance, royalities of all materials and cost of all labour and T&P. required for the work etc. including labour cess but excluding GST complete in all respect as per direction of the Engineer-in-charge (mixture machine to be used at site). | 13.64 | Cum | |
| 8 | 8 | RCC M20 having compressive strength of 20mpa, target mean strength of 30mpa, for150mm cubes at 28 days curing as per IS-456-2000 & I.R.C-212000 test conducted in accordance with I.S. 516 using 20mm & down graded size crusher broken hard granite coarse aggregate of approved quality and from approved quarry & other materials as per section 302 of I.R.C.21-2000 & IS-456-2000 of approved quality including centering, shuttering & form works for providing smooth & water tight surface, hoisting, lowering & laying concrete in layers not exceeding 30 cm. compacted thickness, compacting with mechanical vibrators true to lines, grades as per drawing & technical specifications, watering & curing for 28 days including basic cost, conveyance, royalties of all materials with all leads & lift, cost of all labour T&P, including labour cess but excluding GST & equipment required for mixing, transporting & placing in position vibrating, compacting, finishing & curing including all incidental expenses complete in all respect as per direction of the E.I.C. but excluding the cost of M.S. rods or Tor steel and binding wire & labour charges for bending binding & tying the grills \nPlinth beam | 10.6 | Cum | |
| 9 | 9 | Column & Beam (GF) | 0.69 | Cum | |
| 10 | 10 | Supplying, cutting, straightening the bent up M.S. Rods or Tor steel, using SAIL / TATA / RINL (grade Fe 5OOD} / JINDAL STEEL / SHYAM STEEL etc. including bending, binding, welding joining if necessary and tying the grills and placing in position as required for R.C.C. works and for providing required no of fan hooks hoisting, lowering, laying including basic cost, conveyance of all M.S. rods or Tor steel and binding wires of 18· to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires) etc. including labour cess but excluding GST complete as per specification & direction of Engineer-in-Charge (GF) | 9.76 | Qntl | |
| 11 | 11 | Fly ash brick masonry in cement mortar (1:6) using 25x12 x8cm size bricks after immersing the bricks for six hours in water before use in Foundation and Plinth including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%) | 11.83 | Cum | |
| 12 | 12 | Fly ash brick masonry in cement mortar (1:6) using 25x12x8cm size bricks after immersing the bricks for six hours in water before use in Superstructure including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%) (GF) | 136.61 | Cum | |
| 13 | 13 | 12mm (½") thick cement plaster (1:6) over brick masonry finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalties of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF) | 723.98 | Sqm | |
| 14 | 14 | 16mm (5/8") thick cement plaster (1:6) over brick masonary finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF) | 600.8 | Sqm | |
| 15 | 15 | Finishing wall with water proofing cement paint of approved shade two coats to give on even shade including basic cost of cement paint, all labour, T&P. and curing etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge | 2527.98 | Sqm | |
| 16 | 16 | 12mm (½") thick cement plaster (1:4) with neat cement punning and bitumen painting on top of walls finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete (GF) | 58.5 | Sqm | |
| 17 | 17 | Supplying, fitting and fixing window M.S. grills, grill gates made of M.S. flat/square bar of approved specification design fitted & fixed including cutting the grooves in brick or RCC structure and making good to the damages with C.C. (1:2:4), cost of nails, screws but including basic cost of grills, conveyance, of all materials, labour, T&P. etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF) | 2261.78 | Kg | |
| 18 | 18 | Painting two coats over a coat of primer with paints of approved shade in all floors to wood and iron works including sand papering, polishing the surface, basic cost, conveyance, of all materials, all labour and T&P. required for the work including labour cess but excluding GST including the cost of paint and primer as per the direction of the Engineer-in-charge (GF) | 10.92 | Sqm | |
| 19 | 19 | Supplying, fitting and fixing up window (sliding type) made of aluminium, section 9778 all window frame section No. 4095, 4096 & 9777, 3994 all shutter frame as panel ftted with rubber beading including lucking arrangement including all fitting, basic cost of materials, labour, T&P. etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge\nAluminium Frame | 123.47 | Kg | |
| 20 | 19.01 | 5mm thick black glass | 25.25 | Sqm | |
| 21 | 20 | Providing fitting, fixing of aluminium door with OEL anodized aluminium door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 5mm black glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge (GF)\nFrame | 277.83 | Kg | |
| 22 | 20.01 | 5mm black glass | 11.06 | Sqm | |
| 23 | 21 | 12mm Prelaminated board | 11.06 | Sqm | |
| 24 | 22 | Providing fitting, fixing Door closure including basic cost, conveyance of all materials, cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge | 10 | No | |
| 25 | 23 | Providing and fixing Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre painted steel (base steel as per IS-53 of 0.6 mm thick "D" quality, galvanised as per IS-277 with zinc of 120 Gm/Sqm) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black/Pearl white/Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52mm and with all vertical and horizontal mullions are of 46x70mm and fixed beadings are of 18x25mm. Accessories/gaskets are to be used as per the manufacturers supply and specification like handle being made of high grade aluminium powder ccoated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered clips should be dglass filled nylon. The sections are to be cut to length, metre joined with corner bracet and frames are fixed to the concrete / masonary walls by means of self expanding screws and plain glass to be using 5mm plain glass including cost of all materials, labours, cess but excluding GST complete as per direction of Engineer-in-charge | 4.02 | Sqm | |
| 26 | 24 | Closed deep chipping to floor and cleaning to RCC surface for receiving of cement work including basic cost of labour, T&P. required for the work including labour cess but excluding GST complete as per direction of the Engineer-in-charge | 73.98 | Sqm | |
| 27 | 25 | Supplying, fitting and fixing of Vitrified tile in floor of size 600x600mm colour / printed series of approved make conforming to IS 13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including basic cost of all materials, labour, T&P etc. required for the work all complete as per direction of Engineer-in-charge (GF) | 31.5 | Sqm | |
| 28 | 26 | Supplying, fitting and fixing of ceramic glazed tile of size 200x300 mm / 200x200mm in dado & skirting on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge | 55.07 | Sqm | |
| 29 | 27 | Supplying, fitting and fixing chequor tile of size 300x300mm in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge | 30 | Sqm | |
| 30 | 28 | Supplying, fitting and fixing of Industrial vitrified tile in floor on 25mm thick bed of Cement mortar (1:1) jointed with neat cement slurry mixed wiht pigment using white cement in grating to match the shade of marbles incluidng rubbing & polishing etc. with basic cost, conveyance, royalities of all materials and cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge (GF) | 10.2 | Sqm | |
| 31 | 29 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with basic cost, conveyance of all materials, labour, T&P. etc. including labour cess but excluding GST required for the complete in all respect as directed by the Engineer-in-charge in all floors | 57.64 | Kg | |
| 32 | 30 | Providing & fixing Stainless steel lettering of 12" height and thickness on granite / tile with special adhesive including basic cost of adhesive, labour, scaffolding etc. including labour cess but excluding GST complete as per direction of Engineer-in- Charge | 264 | No |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
