}

Repair And Maintenance Overhauling To Ceiling Fan Geysers Exhaust Fan And Misc E M Services At Akhnoor Under Ge North Akhnoor, Akhnoor-Jammu And Kashmir

Military Engineer Services-MES has published Repair And Maintenance Overhauling To Ceiling Fan Geysers Exhaust Fan And Misc E M Services At Akhnoor Under Ge North Akhnoor. Submission Date for this Tender is 21-07-2020. Ceiling Fan Tenders in Akhnoor Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

24697225
Corrigendum : Repair And Maintenance Overhauling To Ceiling Fan Geysers Exhaust Fan And Misc E M Services At Akhnoor Under Ge North Akhnoor
National Competitive Bid
Indian
Jammu And Kashmir
Akhnoor
21-07-2020

Tender Details

Repair And Maintenance Overhauling To Ceiling Fan Geysers Exhaust Fan And Misc E M Services At Akhnoor Under Ge North Akhnoor

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 14-Jul-2020 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 21-07-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 23000.0 /-
Tender Value
INR 11.50 Lakhs /-

BOQ Items

Name of Work : REPAIR AND MAINTENANCE OVERHAULING TO CEILING FAN GEYSERS EXHAUST FAN AND MISC E/M SERVICES AT AKHNOOR UNDER GE NORTH AKHNOOR.
Sl. No. Item Description Item Code / Make Qty Units
1 1 Taking down ceiling fans any make and size from ceiling fan hook, cleaning externally, opening up for examination and overhauling complete by means cleaning of bearing, starter and rotor winding, providing new proper grade lubricant oil, grease and ressembling and re-fixing in same position or another position complete all as directed\nNote :- Replacement of defective spare parts and rewinding shall be measured and paid under relevant item catered here-in-after) 1110 Each Job
2 2 Dismantling of existing worn out/burnt winding of ceiling fans 1200 mm sweep and re-winding of ceiling fans with same size and class of insulation of super enameled copper wire, varnishing with approved quality insulating varnish complete including replacement of split pins locking nut, seal with nuts, bolts and washers complete all as directed.\nNote: Repair/rewinding of fans shall be carried out at contractor's workshop & will be returned back & installed at its existing or new locations as directed after carrying out repair/rewinding work. 800 Each
3 3 All as per srl item No 02 here in before but for 1400 mm sweep.\n 310 Each
4 4 S & F in replacement of ball bearing of ceiling fans of size No 6200.\nMake : SKF/NBC 200 Each
5 5 S & F in replacement of ball bearing of ceiling fans of size No 6201.\nMake : SKF/NBC 150 Each
6 6 S & F in replacement of ball bearing of ceiling fans of size No 6202.\nMake : SKF/NBC 80 Each
7 7 S & F in replacement of ball bearing of ceiling fans of size No 6203.\nMake : SKF/NBC 80 Each
8 8 S & F in replacement of Gun metal bush for ceiling fan 1200 mm/1400 mm sweep. 250 Each
9 9 S & F in replacement of condenser/capacitor (Old fitted) 2.5 MFD for ceiling fans. \nMake : Usha/Universal/Asian/ GEC/ Crompton 700 Each
10 10 S & F in replacement of condenser/capacitor (Old fitted) 3.15 MFD for ceiling fans. \nMake : Usha/Universal/Asian/GEC/Crompton 40 Each
11 11 S & F in replacement of condenser/capacitor (Old fitted) 4 MFD for ceiling fans. \nMake : Usha/Universal/Asian/GEC/Crompton 10 Each
12 12 Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as reqd. 200 Each
13 13 S & F in replacement of PVC canopy upper side suitable for ceiling fans of size 1200 mm / 1400 mm sweep 200 Each
14 14 S & F in replacement of down rod with coupling socket side rubber reel bush split pin etc suitable for ceiling fan of size 1200mm /1400mm sweep of any type make. 50 Each
15 15 S & F Hanging clamps complete with rubber reel, nuts and bolts complete suitable for ceiling fans of size 1200 mm / 1400 mm sweep of any type/make. 300 Each
16 16 Supply and fixing split pins suitable for ceiling fans of size 1200 mm / 1400 mm sweep of any type/make. 400 Each
17 17 Machinery screw any type suitable for 1200 mm/1400 mm sweep ceiling fans of any type/make. 59 Set of three
18 18 S & F in replacement of fan blade set suitable for 1200 mm sweep ceiling fans of any type/make. 20 Set of Three
19 19 S & F in replacement of fan blade set suitable for 1400 mm sweep ceiling fans of any type/make. 10 Set of Three
20 20 Taking down exhaust fan of any size and make from wall, cleaning externally, opening for examination and overhauling complete by means cleaning of bearing, starter and rotor winding, providing new clean proper grade lubricants oil, grease and reassembling and re-fixing in same position or another position complete all as directed.\nNote :(a) Replacement of defective spare parts and rewinding shall be measured and paid under relevant item catered here-in-after.\n(b) Repair shall be carried out at site of work. 60 Each
21 21 Dismantling of existing worn out /burnt winding of exhaust fans 230 mm to 375 mm sweep and re-winding of exhaust fan with same size of super enameled copper wire, varnishing with approved quality insulating varnish including replacement of nuts, bolts and washers etc complete all as directed.\nNote: Repair/rewinding of exhaust fans shall be carried out at contractor's workshop & will be returned back & installed at its existing or new locations as directed after carrying out repair/rewinding work. 35 Each
22 22 All as per Srl item No 21 here in before but of size 375 mm to 450 mm sweep. 25 Each
23 23 S & F in replacement of ball bearing of exhaust fan of size 230 mm to 375 mm sweep 25 Each
24 24 S & F in replacement of ball bearing of exhaust fan of size 375 mm to 450 mm sweep 20 Each
25 25 S & F in replacement of exhaust fan capacitor for size 230 mm to 450 mm sweep \nMake : USHA/UNIVERSAL/ASIAN/GEC /CROMPTON/BAJAJ/KHAITAN/ORIERT 24 Each
26 26 S & F in replacement of exhaust fan blade set suitable for fans of size 230 mm sweep 10 Set of Three
27 27 S & F in replacement of exhaust fan blade set suitable for fans of size 300 mm sweep 10 Set of Three
28 28 S & F in replacement of exhaust fan blade set suitable for fans of size 450 mm sweep 10 Set of Three
29 29 Taking down wall fans any make any size from wall, cleaning externally, opening up for examination and overhauling complete by means cleaning of bearing, stater and rotor winding, providing new proper grade lubricants oil, grease and reassembling and re-fixing in same position or another position complete all as directed\nNote :- (a) Replacement of defective spare parts and rewinding shall be measured and paid under relevant item catered here in after.\n(b) Repair shall be carried out at site of work. 8 Each
30 30 Dismantling of existing worn out/burnt winding of wall fan upto 450 mm sweep and re-winding of wall fan with same size of super enamelled copper wire, varnishing of approved quality insulating varnish complete including replacement of nuts, bolts, and washers etc \nNote: Repair/rewinding of wall fans shall be carried out at contractor's workshop & will be returned back & installed at its existing or new locations as directed after carrying out repair/rewinding work. 8 Each
31 31 S & F in replacement ball bearing/bush suitable for wall fan upto 450 mm sweep any make and type as per existing old one complete. \nMake : SKF/NBC 5 Each
32 32 Preparation of old surfaces of ceiling fans and blades by scraping out old existing paint with the help of emery paper/wire brush including filling the cavities and painting insitu with two coats of white synthetic enamelled paint over a coat of red oxide primer with the help of spray machine including Greazing, re-writing MES SL No with black paint in Capital letter for 1200mm/1400mm sweep ceiling fan. 250 Each
33 33 S & Fixing PVC twin core copper conductor twisted wire of size 23/ 0.0073 . 500 RM
34 34 Supply and fixing flexible copper wire of size 3 core 2.5 Sqmm multistranded 1100 volts grade all as specified. 200 RM
35 35 Taking down water heater storage type after unscrewing the nuts from grouting bolts and disconnecting of water connection of any type and capacity 50/35/25 ltrs, taking out the tank after unscrewing the screw of the body cover and cleaning, descaling of inner tank and assembly by using HCL solution ,making the tank leak proof by welding, brazing or by any other suitable method, re-assembling and fixing back at its original position and testing complete all as specified and directed. 70 Each
36 36 Supplying and fixing in replacement heavy duty PVC pipe 15 mm dia 450mm long including taking down the damaged PVC pipe of any size from storage type water heater after unscrewing the nuts from GI Pipe and storage type water heater complete all as specified. 50 Each
37 37 Taking out damaged geysers assembly/ apparatus plates storage type water heater of capacity 50/ 35/ 25 ltrs after unscrewing nuts and screws complete all as specified. 35 Each
38 38 Supply and fixing geyser assembly/apparatus plates storage type water heater of capacity 25 ltrs including rubber washer, nuts and bolts any type and make all as specified. 25 Each
39 39 Supply and fixing geyser assembly/apparatus plates storage type water heater of capacity 35 ltrs including rubber washer, nuts and bolts any type and make all as specified. 5 Each
40 40 Supply and fixing geyser assembly/apparatus plates storage type water heater of capacity 50 ltrs including rubber washer, nuts and bolts any type and make all as specified. 10 Each
41 41 Geyser element having round on storage type water heater of any size and type of capacity 1500 watt including taking down the unservicable element from geyser, all as specified.\nMake: micron/ theeta\n 10 Each
42 42 Geyser element having triangle on storage type water heater of any size and type of capacity 1500 watt including taking down the unservicable element from geyser all as specified.\nMake: micron/ theeta\n 60 Each
43 43 Geyser element having round/clip/triangle on storage type water heater of any size and type of capacity 2000 watt including taking down the unservicable element from geyser all as specified.\nMake: micron/ theeta\n 20 Each
44 44 Geyser element along having pocket for thermostate with base round/clip/triangle as required on storage type water heater of any type of capacity 1500 watt including taking down the unservicable element from geyser, all as specified.\nMake: micron/ theeta\nNOTE: THERMOSTATE SHALL BE MEASURED AND PAID SEPERATELY.\n 5 Each
45 45 Supply and fixing cup type heating element for solar water heater of cap. 3 KW, 230 Volt with pocket for thermostate all as specified and directed.\nMake: micron/ theeta\nNOTE: THERMOSTATE SHALL BE MEASURED AND PAID SEPERATELY.\n 10 Each
46 46 Thermostat in water heater storage type of any make/size including taking down the unservicable thermostat.\nMake: Eskon or equivalent. 50 Each
47 47 Taking out unservicable and supply and fixing in replacement Stop valve 15 mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union including taking down of old unserviceable stop valve any type and size, complete all as specified. 20 Each
48 48 S & F stop valve, (ISI Marked) cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of 20 mm bore complete all as specified and directed. 5 Each
49 49 S & F stop valve, (ISI Marked) cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of 15 mm bore complete all as specified and directed. 5 Each
50 50 S & F 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair. 5 Each
51 51 PRV (Pressure release valve) for the safety of geysers including taking down the unserviceable valve complete all as specified. 5 Each
52 52 Supply and fixing indicating lamp (red/green) type as per existing size and shape including taking down old unserviceable PRV, complete all as specified. 10 Each
53 53 Supply and fixing bottom cover of outer tank suitable for geyser of 25 ltrs capacity including taking down old unserviceable bottom cover, complete all as specified. 5 Each
54 54 Supply and fixing bottom cover of outer tank suitable for geyser of 50 ltrs capacity including taking down old unserviceable bottom cover, complete all as specified. 5 Each
55 55 S & F Plug top 3 pin 16 amp all as specified and directed. 25 Each
56 56 Replacement of unserviceable 25Ltr capacity internal tank made of copper tank heavy duty guage with double lapped joint 25 ltr capacity suitable for geyser of any type/make with necessary screws, nut bolts gasket etc complete including dismantling/taking down old unserviceable internal tank complete all as specified as directed by Engineer-in-Charge. 5 Each
57 57 All as per Srl item No 56 above but 35 Ltrs capacity complete all as specified. 2 Each
58 58 All as per Srl item No 56 above but 50 Ltrs capacity complete all as specified. 6 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail